DLLEXPORT, DLLSTDCALL and the two


Eren,

DLLEXPORT is a macro that refers to "__declspec(dllexport)" (see this link), which means that this variable/function is exported for use even outside the DLL.

DLLSTDCALL is a macro of LabWindows/CVI for conventions for calling features. Here to extract a bit of the ICB-help:
"Other platforms, like UNIX, do not recognize the keyword __stdcall. If you work with source code that you use on other platforms, you must use a macro instead of __stdcall. The cvidef.h include file defines the DLLSTDCALL macro to do this. »
"Calling convetion" describes how the parameters are put on the stack during the switch between the code of the appellant to the called function. There are very many conventions, but are the most important Windows: cdecl and stdcall (it is sometimes also used fastcall).
If you want to learn more on this topic, perhaps you want to take a look here.

hope this helps,
Norbert B.

Tags: NI Software

Similar Questions

  • is it possible to fill two paths opened by the pen tool and the two paths open close the other?

    is it possible to fill two paths opened by the pen tool and the two paths open close the other?

    You should find the forum for any product it is and post your questions there.

    Here is a link to a page that provides links to all of the Adobe forums...

    The Forum links page: https://forums.adobe.com/welcome

  • Since the last update of Firefox, I don't see a security lock when I connect to my two web sites to secure Bank so am forced to use IE and the two banks said the problem with Firefox, not their systems.

    Since the last update of Firefox (Version 4.0.1) I do not see a security lock when I connect my two web sites to secure Bank so am forced to use Internet Explorer for internet banking. I contacted the St George Bank and the ANZ Bank and both say that the problem with Firefox, not their systems. They advise also strongly me to not perform Internet banking unless the security padlock closed is visible in the window secure. The padlock is not visible when I connect secure site of PayPal. Before the upgrade, this problem did not exist and there is no when I use IE. Firefox is my favorite browser.

    The status bar everything has been redesigned, so now allows you to check if the site is secure the box to the left of the address (green, blue or plain).

    The site identity button | How | Firefox help

    Further discussion on this change mention an add-on, you can use if you really prefer to see a lock:

    Firefox 4 where is the lower right corner of padlock | Firefox Support Forum | Firefox help

  • computer Windows does not recognize my 2nd hard drive but the computer management and the two bios say he's here?

    Secondary drive of HP laptop.  Vista ultimate 64 bit OS.   I installed a hard drive, formatted with computer management, check the bios, as saying that this is? I haver to do?

    Steve, run Bios secondary ck drive it passeds all tests.

    Computer management is fwhat I used for the format and the name of the drive.  It recognizes the drive!

    When I click on computer is not there? Why

    No errors, Ran H P health check it says his State there but intelligent smart stranger.  BIOS says smart successful test.

    Returns the 320 GB sata drive and bought a 250 GB sata drive it works. Don't know why computer windows didn't see it or report it defective.

    Another problem I had.  I have replace the c drive he had run a windows launched out of the backup of the computer, to another drive. tried to restore it. It did not restore my nero or any other software and updates.  Is there a way completely a backup disk and restore all on a new drive.  I'm not stealing everything that I bought everything.  Norton Ghost will do it?  E-mail address is removed from the privacy * pls send an e-mail.

  • Why if a system is xp and one system is windows 7 and the two connected to the local network, but file-sharing does not work

    a system is xp, another system is windows 7 basic and both connected to the local network, after you set up shared drive, mowing arrives not

    Hi Abhay,

    I suggest disable you the password protected sharing and check if it helps.

    Networking of computers running different versions of Windows

    Note: Follow the steps in the section "to enable sharing protected by password in Windows 7" and turn off password protected sharing.

  • I buy just creative photography of cloud and the two programs show that I left 27 days on the trial.

    How can I erase this?  I am connected with the same account in which I bought the programs

    Your subscription to cloud shows correctly on your account page?

    https://www.adobe.com/account.html for subscriptions on your page from Adobe

    If you have more than one email, you will be sure that you use the right Adobe ID?

    .

    If Yes

    Sign out of your account of cloud... Restart your computer... Connect to your paid account of cloud

    -Connect using http://helpx.adobe.com/x-productkb/policy-pricing/account-password-sign-faq.html

    -http://helpx.adobe.com/creative-cloud/kb/sign-in-out-creative-cloud-desktop-app.html

    -http://helpx.adobe.com/x-productkb/policy-pricing/activation-network-issues.html

    -http://helpx.adobe.com/creative-suite/kb/trial--1-launch.html

    -ID help https://helpx.adobe.com/contact.html?step=ZNA_id-signing_stillNeedHelp

    -http://helpx.adobe.com/creative-cloud/kb/license-this-software.html

    .

    If no

    This is an open forum, Adobe support... you need Adobe personnel to help

    Adobe contact information - http://helpx.adobe.com/contact.html

    Chat/phone: Mon - Fri 05:00-19:00 (US Pacific Time)<=== note="" days="" and="">

    -Select your product and what you need help with

    -Click on the blue box "still need help? Contact us. "

  • I tried to install Lightroom5 and Photoshop elements 11 discs purchased on a new computer. Running Win7 64 bit and the two screen installation errors.installation package cannot be opened. Any ideas please? Desperate John.

    2015-12-31_001402.jpg2016-01-07_125207.jpg

    then download the installation files.

    Available downloadable Setup files:

    Download and installation help links Adobe

    Help download and installation to Prodesigntools links can be found on the most linked pages.  They are essential; especially steps 1, 2 and 3.  If you click on a link that does not have these listed steps, open a second window by using the link to Lightroom 3 to see these "important Instructions".

  • TWO SEPARATE COMPUTERS UPGRADE 8.0 IN 24 HOURS, AND THE TWO CRASH AT STARTUP

    BOTH UNDER XP.

    You have installed Trusteer report ? If so, disable it.

       * Windows: "Start->All Programs->Trusteer Rapport->Stop Rapport"
   * Mac: "System Preferences -> Other -> Rapport -> Stop Rapport"

    For more information, you can request their assistance.

    http://www.Trusteer.com/support/en/report-problem

    http://KB.mozillazine.org/Firefox_crashes#Trusteer_Rapport

    RoboForm is also originally 8 Firefox crash at startup. Install the last 7.6.2 version of Roboform.

    http://www.RoboForm.com/support/news

  • The two formats on iPad 3

    Hello

    I published a new edition of my mag and the two interpretations are appearing in the kiosks of the iPad 3... one is the version of res lowe and the other is the version of the retina.

    Both formats have the same product ID so what did wrong?

    Folio names are different, but has no importance before.

    Any help would be great...

    When you publish content, the two parameters determine whether a folio is a partner or a different problem. These parameters are name and sheet size.

  • Problems of RoboHelp 7 HTML with whtbar.js and the previous topics of WebHelp

    Hello

    I have posted before with great success on the whtbar.js file. For example, in one of our products, the WebHelp opens within the program, so I had to make sure I always checked in the old whtbar.js under version control file, replacing the last file whtbar.js created during the compilation of RoboHelp. Otherwise, the previous and next topic navigation would not work. So, which was not a problem since then. Now we have two new products that I created WebHelp projects for, but the buttons back and before previous/next topic do not work.

    When I compile projects Robohelp, the sequence through the left and right arrows appear, but do not work. I use just the browser buttons next and previous. So I can only confirm their appearance so that a browse sequence is implemented in my project. Well, a bit over the last few days, I noticed that these previous topic and next arrows do not work in the two news accessed by a link from a web page of finished products.

    Should I use the last updated during the last compilation whtbar.js file and keep it archived in our software source SVN control? Unlike my first project of WebHelp, these are accessible from a URL and not inside a .exe. So, I think that the restriction of the use of the original whtbar.js file may not affect the two new WebHelp projects, whose assistance is accessible from a link on a web page. Does anyone have a suggestion?

    I use RoboHelp HTML 7. The upgrade would eliminate any of these problems? With 7, I have to edit the whver.js file to get help to work properly in Google Chrome, so I usually just check all new files in SVN and then delete a single file and replace it with the file that had the additional Chrome tag. Are there features that anyone finds particularly useful in the new versions?

    Finally, on an unrelated note, when you import topics in a new project (after the import of models), is anyway for the subjects copied keep their models and indexing? Looks like there must be, but I have not understood that yet.

    Thanks for all your help,

    Kevin

    Hi Kevin

    Here's the skinny.

    First of all, I will talk about the basic of a sequence function to browse.

    A browse sequence is nothing more than a set list of topics. Very similar to links in a chain. The intention is that the user will work since the topic first in the sequence of the last in the order of the list. In the skin, if the first topic that is part of a sequence is presented in the topic pane, the previous button is disabled because there is nowhere to go 'Back' to. It is the starting point. The next button is available. Once you click on the next button, the next topic in the sequence is presented, and the two buttons are now enabled. (On condition, of course, that there are at least three subjects in the sequence.) Once the last subject of the sequence is presented, the next button is disabled while it is has no other defined subjects to visit. But the back button is enabled allowing you to work your reverse path in the chain.

    In a release of WebHelp and FlashHelp stripped with no special changes, the buttons are placed in this area if you have defined a sequence through and if you chose to present the sequence go through the recipe for single source layout.

    Now there are several ways to step beyond RoboHelp and monkey with its matching files to bend to our whims. Long ago, I discovered that you can cajole these buttons allow to present, and then modify some of the files so that the buttons using JavaScript for the history of massage. I have therefore thought that maybe by copying the updated file javascript, this had been done and that would explain the behavior entirely.

    What I'm thinking, is that in the previous project where things seem to work, it was in reality a set sequence. But in these projects where things seem broken, no sequence has been defined, so the behavior.

    Click on the link below to learn more

    My RoboWizard site linked above, you can also freely download a file called "The Skinny on Skins", where I detailed how to make buttons Previous and Next behave like browser buttons next and previous.

    See you soon... Rick

    Useful and practical links

    Wish to RoboHelp form/Bug report form

    Begin to learn RoboHelp HTML 7, 8 or 9 in the day!

    Adobe Certified RoboHelp HTML Training

    SorcerStone blog

    RoboHelp EBooks

  • Question CSH, executives and the Navigation links...

    I have a display problem with framesets.  In my projects, I've created several sets of frames with 2 images in topic, 30% on the left, 70% on the right.

    In settings of WebHelp, I chose "connection pane, see Navigation in the topics.  The problem is that it adds a link 'Show' on each side of the frame, and when they are clicked on, it translates into 4 frames being created, with 2 separate navigation images.

    Is there a way to solve this problem, so that managers keep crack whenever I click a link?

    I can understand why you don't like it, but it is certainly logical. The idea of iFrames is that you can show what you love and the two functions independently. You have chosen to view the two areas of assistance, but the iFrame will not worry if that's what you are showing or a page of Ferraris and a Mercedes-Benz cars. Everything you click on will work within this framework.

    In your case by clicking on view is meant that complete help opens in this context for the subject and complete help for the framework of other shows when you click on the link to see the second. You look at still only two iFrames. Until you click on display, each of them show the subject only. Subsequently, they show the section and the nav pane.

    Who said?

    Back to the drawing board, I guess.

    See www.grainge.org for creating tips and RoboHelp

    @petergrainge

  • IPhone 7, there will be an adapter jack allowing the two using headphones AND charger?

    IPhone 7, there will be an adapter jack allowing the two using headphones AND charger?

    Hello

    Apple has not yet announced a.

    You can submit your comments and suggestions to Apple here:

    https://www.Apple.com/feedback/iPhone.html

  • My tool bar has completely disappeared, and pressing F10 or ALT or the two together doesn't matter.

    Also, sideways on the page margins became broader - do not know if the two are related.

    Could you make sure that Firefox is not in his view "full screen"? On Windows, you should be able to exit the full screen using either:

    • F11 key (this screen full switches on and outside)
    • Drag the pointer of the mouse to the top of the screen, try a few points if necessary and the toolbar area must roll down, then either:

      • Click on the "3-bar" menu button and full screen
      • Right click > exit full screen

    Does it work?

  • What are the two icons to the left of the indicator in the mac mail (arrows and circle)?

    What are the two icons next to the flag in the mail from mac (arrows and circle)?

    I can't understand what they're doing. Thanks for any help!

    If you are referring to the registration of the preview, the arrows appear when you Replied (curved) or transferred (right arrow) by e-mail.

    The circle, when rempli filled in blue, indicates you have not yet opened / read the email.

  • My computer shows the two worm 37.0.1 and 38.0.5 installed. Can I remove 37 safely?

    Control Panel on my wife's cell phone show 2 versions of Firefox are installed and pages loading slowly. My desktop display only 1 version and the pages load faster. Can I remove 37 without affecting 38 or is it a different problem? Thank you.

    Have you checked that there are really two different Firefox program files?

    Where do you see the two versions?

    If it's in the ' Windows Control Panel > programs ', then it is more likely an entry of rest that does not are deleted when Firefox updated and uninstall the old 37.0.1 version will delete the current 38.0.5 release and you would have to reinstall Firefox.

Maybe you are looking for