DNS records in the VCS - ARM deployment

Similar Questions

• Assign host names to deployed VM based on the assigned IP address DNS record

  Hello

  I'm trying to set up Lab Manager in a lab environment. The laboratory uses static IP, so I set up static IP pools that will assign an IP address to a deployed virtual computer. However, Lab Manager requires that you provide the hostname before you deploy (the default is ConfigXXVMY, XX and there is a number (ex.) Config30VM0). We already have DNS records to our IP addresses, and we need the hostname to match with the IP address.

  For example, the IP 192.168.1.5 has a labpc5.ourlab.company.com DNS record, and the host name should be labpc5.

  When I deploy a model, Sysprep runs and it will change all network information, but it changes the hostname of this ConfigXXVMY, not the host name that resolves the IP address is assigned. I need to know how to fix this, or if there is a kind of way to make that change to pre or post sysprep.

  Note: I tested this especially with Windows Server 2003 and 2008 - I intend to eventually include Linux OS and this issue also apply here.

  If someone has an entry that could help me solve this problem, I would really appreciate it.

  Thank you.

  Yes, if the network works immediately after sysprep and before you reboot... then just write a post customization.

  Pre and post customization are command line arguments.

  i.e.

  PREandPOSTscript.bat postcustomization

  There, you'll need something like this:

  off @echo

  If "% 1" == "precustomization")

  tasks precustomization echo

  ) ElseIf '%1% ' == 'postcustomization')

  tasks postcustomization echo

  ) (other)

  unknown command line Echo

  )

  The syntax is another post here: http://communities.vmware.com/thread/167069

  Kind regards

  Jonathan

  B.SC., RHCT, VMware vExpert 2009

  NOTE: If your question or problem has been resolved, please mark this thread as answered and awarded points accordingly.

• Registration of endpoint to the VCS control cluster

  Hello

  We have VCS cluster in our environment (primary and secondary control VCS and VCS-Express). I could see almost as many end points on each control VCs. How is endpoint knows which server control VCS, it must register to? How does this load balancing is performed. any setting that I have to look?

  Thank you!

  It depends on how you have your DNS configuration.  Can you tell us in detail how you have your end points registering on clusters, as well as how you have your DNS configured?  Do you use SRV, alternate records?

  The VCS Cluster Deployment Guide, annex 5 goes on how set up your points of termination for you join the cluster and the different methods to do so.  Appendix 6 covers the SRV records.

• Where can I find documentation on how to get the VCS - C and VCS-E to Exchange presence information

  I turned presence on my VCS - C and VCS-E, but depending on whether I am VPNed or not, I don't see the State of the presence of my side of the firewall.

  I checked for x7.1 Administrator's guide, I looked in the guide of authentication devices, and I'm at a bit of a loss.

  Is what I'm trying to do as possible, and if so, what do I have to do to make this work?

  I have a pretty simple setup - that works very well, could give you some ideas;

  Two VCS - Independent C (soon to be clustered) and a VCS-E;

  all internal clients of the JabberVideo register with a VCS - C, and when external registers with the VCS-E (all of my users of Singapore recorded with the VCS-E).

  Authentication is directly with AD and is made on the a WHAT VCS - C regardless of the user is registered with the VCS - C or the VCS-E.

  PUA and presence disabled on VCS-E and activated on the VCS - C, which is used as SIP registrar.

  Authentication on VCS - e:

  Default subfield "do not check".

  Default zone "do not check".

  Traversal server box "do not check".

  Authentication on VCS - C:

  Default subfield "audit powers.

  MOVI area 'audit powers.

  Point final SIP registration box "treat as authenticated.

  Course customer area 'audit powers.

  Authentication works well, the users cannot sign up for the VCS-E with the wrong password or user name, and presence works well too - both inside and outside.

  /Jens

• you need prove the ownership of the domain by creating a DNS record

  I recorded the record MX and TXT on my domain name (name: samcom.co.in). Even now, I get the same error of ' you need prove the ownership of the domain by creating a DNS record '. This is for registration to e-mail customized outlook.com. After recording update MX & the TXT record, I already waited 30 hours. Need more time (e.g. 72 hours) before it can be verified?

  I reconfirmed if the MX record has been updated with the help of http://mxtoolbox.com/... And it has been updated correctly.
  It would be great if someone can help please on even.
  Concerning
  D

  Hi Christophe,

  Since the already educated suggestions do not help, I suggest that you post your question in the TechNet forums because they cater to the audience of it professionals.

  Thank you

• Question on DNS entries for the grouping and the call

  Hey all,.

  We test a bunch of highway that has been placed in its own subdomian DNS (for example)

  cluster.Domaine.com

  With DNS entries:

  SRV

  _sips._tcp.cluster.domain.com. 86400 IN SRV 5061 1 1 Expressway1.cluster.domain.com.

  _sips._tcp.cluster.domain.com. 86400 IN SRV 5061 1 1 Expressway2.cluster.domain.com.

  _sip._tcp.cluster.domain.com. 86400 IN SRV 1 1 5060 Expressway1.cluster.domain.com.

  _sip._tcp.cluster.domain.com. 86400 IN SRV 1 1 5060 Expressway2.cluster.domain.com.

  _h323ls._udp.cluster.domain.com. 86400 IN SRV 1 1 1719 Expressway1.cluster.domain.com.

  _h323ls._udp.cluster.domain.com. 86400 IN SRV 1 1 1719 Expressway2.cluster.domain.com.

  _h323cs._tcp.cluster.domain.com. 86400 IN SRV 1 1 1720 Expressway1.cluster.domain.com.

  _h323cs._tcp.cluster.domain.com. 86400 IN SRV 1 1 1720 Expressway2.cluster.domain.com.

  _h323rs._udp.cluster.domain.com. 86400 IN SRV 1 1 1719 Expressway1.cluster.domain.com.

  _h323rs._udp.clusterdomain.com. 86400 IN SRV 1 1 1719 Expressway2.cluster.domain.com.

  A

  Expressway1.cluster.domain.com. IN a x.x.x.x (address IP Expressway1)

  Expressway2.cluster.domain.com. IN a x.x.x.x (address IP of Expressway2)

  However, I would actual calls placed to the root domain

  domain.com

  But with these entries DNS pointing to the subdomain of cluster, or I point to the individual counterparts of the cluster (see above). My feeling is that what I should do to the cluster so I need update DNS entries for the main domain if the peer of the cluster changes, such as:

  SRV

  _sips._tcp.domain.com. Cluster.Domaine.com IN SRV 0 0 5061 3600.

  _sip._tcp.domain.com. Cluster.Domaine.com IN SRV 0 0 5060 3600.

  But is this correct?

  Post edited by: Chris Swinney

  Comment added to records showing that they point to

  Hi Chris, how are you?

  If I remember correct SRV RFC which would be an error because no recursive search of srv would get,

  the address at the end of the srv record must be an a record (so also no CNAME).

  In your scenario, you can use:

  _sips._tcp.domain.com. 86400 IN SRV 5061 1 1 Expressway1.cluster.domain.com.

  _sips._tcp.domain.com. 86400 IN SRV 5061 1 1 Expressway2.cluster.domain.com.

  _sip._tcp.domain.com. 86400 IN SRV 1 1 5060 Expressway1.cluster.domain.com.

  _sip._tcp.domain.com. 86400 IN SRV 1 1 5060 Expressway2.cluster.domain.com.

  _h323ls._udp.domain.com. 86400 IN SRV 1 1 1719 Expressway1.cluster.domain.com.

  _h323ls._udp.domain.com. 86400 IN SRV 1 1 1719 Expressway2.cluster.domain.com.

  _h323cs._tcp.domain.com. 86400 IN SRV 1 1 1720 Expressway1.cluster.domain.com.

  _h323cs._tcp.domain.com. 86400 IN SRV 1 1 1720 Expressway2.cluster.domain.com.

  _h323rs._udp.domain.com. 86400 IN SRV 1 1 1719 Expressway1.cluster.domain.com.

  _h323rs._udp.domain.com. 86400 IN SRV 1 1 1719 Expressway2.cluster.domain.com.

  h323cs and rs cannot be used (cs is if you dial the field directly without user @ from the beginning)

  RS is used for registration, most of the configurations that I saw live fine without it...

  BTW, if it is a copy paste, replace your alone there is an error in the last entry of rs, it lacks one. between the two

  cluster and field.

  Btw2, I would set a record also has to be cluster.domaine.com at least one of the VCS, it's

  very convenient for endpoints no or wrong to support srv records.

• Make the midi recording when the track is not selected

  Hi, asking for my friend and will try and find a solution when I get home, but...

  My friend (using logic 9.1.8) made some record with about 12 actors/singers alive. I suggested to him that he must save the midi for keyboard player (who is also the composer of all parts) as well as the audio just to give them some flexibility later. It is a great keyboard player and uses its own external keyboard. (i.e. not logic instrument). All the other singers/actors are all audio.

  So it is easy to implement but as such sessions can become a little hectic and although the midi for keyboard track is in record mode, the midi does not record unless the track is selected on the left. Sometimes, in the madness of him the entire midi track remains not selected and if the midi data does not get saved. Is it possible to routing in the environment where the midi will get recorded although the midi track is not selected? Don't forget, the midi track is always made armed.

  Thank you very much

  Looks like you entered only followed for the targeted track has allowed...

  This picture isn't in X 9 - but it's the same setting...

  Make sure that this is not the case-

  

• DKIM add txt DNS Record

  Hi people,

  I have a key DKIM to add and I use the application service provider to put me in the hostname as "/ hostname: api._domainkey.
  However I can't put the line of underscore '_' in the entrance of the DNS server. So, is there a good way to do this? I can successfully well of SPF as a txt record.

  Any help is appreciated.

  Best regards
  Alainlain

  You need to reach to hand modify the DNS server. You found the.app program does not allow this.

  First temporarily disable the server DNS from Mac in.app

  Then launch Terminal.app and edit the appropriate in - file

  / Library/server/name /.

  for example db.yourdomain.com

  Then add a line to this file looking like this, but with your values.

  _domainkey.yourdomain.com.               10800 IN TXT "t = y; o = ~ ; [email protected]".

  Note: You may need to do this as well on your Mac DNS server and also on an external DNS server that is managed by your Internet provider, it depends on how your domain is configured.

  Finally, use.app to start your Mac DNS server again, and then re - read the DNS files, including the addition above.

• question about DNS records

  Hello

  I installed on my windows 7 NAS synology (to put my video and music on it), now I can connect remotely to my URL of SIN, which is for example http://bob.synology.me:5000.

  now, I have installed on it video station and when I get like the bob.synology.me:5000/video instructions.  I've got access denied because of reverse DNS.

  what I need to do / nested dns record video.

  My only question is here after someone has a bob.com URL and then he wants to access some software on their server in this example is a video you need to do a separate DNS record after / Video

  Johan

  Hi Johan,.

  The problem you are having is better suited in the Microsoft TechNet forum. We have a dedicated team to help you with such questions. I suggest you post the same question in the Microsoft TechNet forum for assistance.

  Microsoft Technet Forum: http://social.technet.microsoft.com/Forums/en-US/home

• Use the VCS to CUCM composition URI

  I have an external SX20 and internal jabber user

  The jabber username is [email protected] / * / and the extension number is 999

  I want entering through the composition by CUCM

  But the path is external SX20 > VCS-E > VCS - C > CUCM > internal jabber user

  I can dial [email protected] / * /, it is successful

  But can not be used [email protected] / * / composition

  Can VCS the [email protected] / * / of CUCM?

  Or where I put in error?

  I suggest that you have a good look through the VCS of Cisco and the deployment of CUCM Guide and verify that your configuration is at least similar to that proposed to allow calls between VCS and CUCM registered endpoints.  Looks like a lot that you are missing a search rule.

  If the above has not resolved your problem, I suggest you move your discussion in the section Unified Communications Applications forums at the section of telepresence , where are discussed more actively to these types of devices.

  Wayne
  --
  Remember the frequency responses and mark your question as answered as appropriate.

• The VCS Diagnostic log output

  Hello!

  To try to determine why the traversal calls are intermittenetly default, I stumbled on the following in the Debug Diagnostic VCS log - E;

  2013 09-12 T 11: 04:20 - tvcs cefa-videoconf-vcsexpress01 07:00: elements UTCTime = "2013-09-12 18:04:20, 223" Module ="developer.fsm" Level = 'ERROR' CodeLocation="allshare/fsm/fsmprntf.cpp(324)" method ="": fsm_ERRTEXT "Thread ="0x7f7965ca6700": detail ="Attempt rejecting W of HTTPFSM to solve the empty hostname"Self ="DNS:0 " "Sender ="HTTPFSM:0. " "MSG ="DNS_HostByName_Req"task ="T_READY_DNS_HOSTBYNAME_REQ"State ="S_READY"NxtState ="S_READY ".

  2013 09-12 T 11: 04:20 - tvcs cefa-videoconf-vcsexpress01 07:00: elements UTCTime = "2013-09-12 18:04:20, 223" Module ="developer.http" Level = 'ERROR' CodeLocation="ppcmains/httpclient/httpfeedtask.cpp(976)" method ="": HTTPFEED_doHTTPResponse "Thread ="0x7f7965ca6700": detail ="Could not connect to URL.""

  2013 09-12 T 11: 04:20 - tvcs cefa-videoconf-vcsexpress01 07:00: elements UTCTime = "2013-09-12 18:04:20, 224" Module ="developer.http" Level = 'ERROR' CodeLocation="ppcmains/httpclient/httpfeedtask.cpp(607)" method ="": httpfeed_retry "Thread ="0x7f7965ca6700": detail ="maximum attempts. " Your comments didn't this time. »

  It seems that VCS tries to reach something but does not give up because the maximum number of attempts has been reached.  I do not see this e-mail when calls are making even though the firewall as they should.  When the calls start to fail, I see that the foregoing repeated many times.

  The VCSes are the two X7.2.2.  The call goes through an IPGW running 2.0 (1.7), which is registered in the VCS-E.  The call came from the public internet, go to an endpoint inside the firewall of the memorandum of appeal through the firewall is H.323.

  My questions are;

  -This sequence of message would cause the fault of calls?

  -If it's just a symptom of the real problem, which is HTTPFSM and what host name empty could he try to solve?

  -The first entry shows 'W rejecting the attempt '.  'W' would be the firewall?

  -There is an external Manager configured on theVCS-E, which is not reachable from the public internet.  Could the attempts by the VCS-E to reach the external trigger managing a denial of firewall that prevents to carry out calls?

  - and finally, the e-mail above sounds familiar to anyone?

  Thank you!

  Don't remember seeing these messages in my logs, but now grep-ing on the current

  files that I didn't want her either.

  HTTP resembles something of web service, maybe your VCS try to connect to your TMS and

  fails, some political or some access to the api internal, commissioning, receiver feedback...

  As you already outside Director is defined but not ok, I think that's the reason.

  Also fits as this sends feedback to the Manager when the call is made, which would be the case

  If it failed.

  Verify that you do not have an ALG in the path, that can also be at the remote site.

  VCS has a quite modern h323 signaling, what works in other directions may therefore be broken

  When a vcs is in the picture.

  How is the call flow? The remote site connects directly to the IPGW?

  We had the feeling that everything works well ask smoother people to dial the address IP of VCS

  and then use the alias of relief VCS to point to an alias on the IPGW ;-)

  Please remember useful frequency responses and identify useful or correct answers.

• Do we need to purchase the license to upgrade the VCS, VCSe and TMS?

  Hello

  We need to get a new license when upgraded version of VCS, VCSe and TMS?

  Hi Kelvin,

  xxx. OVA files are package files to deploy the VCS on virtualize platforms.

  Release key are required to upgrade the VCS for major updates. for p. ex. upgrade of x 6 x 7 software version worm.

  However for improvements minor as x7.2 to x7.2.2 these are the released hotfix version or bux fixes release and you don't need a license for this upgrade.

  in any case if you your devices are less covered by valid contract you can get the license key anytime just contact cisco license team on "[email protected] / * /" and they should be able to provide the necessary license.

  Rgds

  Alok

• Update the VCs x8.1

  Hi all

  I read the release notes for the new x8.1 VCS software but can't find anything on the upgrade path.  Is it safe to upgrade to x7.1(running TMSPE) directly to x8.1 without having to do an upgrade of the stage?

  See you soon,.

  André

  Generally Yes, but of course, as we are not your configuration, such as how successfully completed its mission.

  including other dependenies you might double check the release notes, deployment and administration guides.

  Do not forget to save your VCS, if you have a virtual version a snapshot can be useful,

  don't forget that you need a release key from X7.x to X8.x

  Please remember useful frequency responses and identify useful or correct answers.

• TMS, VCS and Jabbber "impossible to connect to the TMS on the VCS agent".

  Dear,

  We have Cisco TMS, VCSC and jabber deployment, we did before commissioning the VCSC and TMS and jabber worked well, but after the upgrade the VCSC v7.2 to jabber version 8.2 has stopped working and I can not connect more and when I go to the TMS and connect to the VCS I get "unable to connect to the TMS on the VCS agent" Please notify

  What TMS version do you use?  And you are using Extension of provisioning of the TMS (TMSPE)?

  Looks like you are using TMS Agent Legacy, which has been supported in VCS X7.2 and has since been removed from X8.1.  You will need to migrate to TMSPE and very probably upgrade your server TMS as well if you do not meet the minimum version.

  Cisco TMSPE 1.0 Deployment Guide

  Here's the guide deployment for TMSPE 1.0, there are newer versions, but 1.0 is one that you want to migrate from legacy Agent TMS.  Once installed and migrate your data, you can then go to the most recent version, which is 1.4 (see below).

  Cisco TMSPE with VCS 1.4 Deployment Guide

• Change the DNS settings in the Pool of IP network

  Hello

  Due to a migration of our DNS servers, I have to change the IP addresses of the DNS servers defined in the (currently used) our BDE server IP pools. There is a Hadoop cluster with a large amount of data running using this pool and I do not have to deploy the cluster again. Restart of the cluster is not matter, so I planned the settings DNS for the cluster nodes have to change after reboot. Unlikely, I could not change the DNS settings. Is there a way (perhaps non-elegant) change those settings for the pool?

  See you soon,.

  Dustin

  Hi Dustin,

  BDE provides the interface to change the DNS server in the network added to the BDE.  You must change the BDE database to do.  Here is the solution:

  1 Server BDE connect you as user serengeti

  2. run this command: echo ' network dns1 set update = 'the_new_dns_server_ip' where name = 'the_network_name '; \q" | psql

  3. apply the new DNS server. There are two approach. You can choose one.

  (a) connection BDE CLI and run "cluster stop - name...". ' and 'start cluster - name... '. "to restart the virtual machines in the cluster, then the new DNS server will be applied.

  (b) on BDE server, run "serengeti - ssh.sh cluster_name " sudo sed-i of | nameserver. * | nameserver the_new_dns_server_ip| ' g' / etc/etc/resolv.CONF. The new DNS server should take effect immediately.

  Thank you for using BDE.

  Jesse @BDE