Do I need a sync cable?

Similar Questions

• Satellite P300 - ribbton need for touchpad cable

  Hello

  I need a ribbon cable for my laptop. The cable is designed for the tablet.
  Laptop model: SATELLITE P300 - 1 to 8
  Model No.: PSPC0E - 1H008EN

  The cable is: HAMBURG - W E235863 AWM 20798 80 60V VW-1

  Thank you

  N

  Hi madnad,

  I think the best way would be if you contact a service provider authorized in your country because they can order all Toshiba spare parts.

  You can find a list of all FSA here:
  http://EU.computers.Toshiba-Europe.com > support & downloads > find an ASP.

  Just get in touch with the guys and explain what you need. I'm sure they can help you :)

• Charger AC/DC & Sync Cable Questions

  New clip + owner here. Two questions:

  1.), I have a charger that goes to my wifes Motorola cell phone. I see that the connector plugs into the clip +. Is it safe to use with it? It will harm the battery somehow? I didn't know if it was too powerful for her, or if the clip + simply 'take what suits him.

  2.), I have a sync cable that goes with my digital camera from pentax. Same connector as the clip +. Would be - this acceptable to use? It is longer and more flexible.

  Thank you

  Eric

  speedythecat wrote:

  New clip + owner here. Two questions:

  1.), I have a charger that goes to my wifes Motorola cell phone. I see that the connector plugs into the clip +. Is it safe to use with it? It will harm the battery somehow? I didn't know if it was too powerful for her, or if the clip + simply 'take what suits him.

  2.), I have a sync cable that goes with my digital camera from pentax. Same connector as the clip +. Would be - this acceptable to use? It is longer and more flexible.

  Thank you

  Eric

  Both the charger and the sync cable should work very well.  Any connector mini-USB 5-pin works with the Clip and Clip +.  Also, make sure that the charger is 5V.  Anything higher than 5V could be a problem.

• USB sync cable

  Help, I lost my USB sync cable and adapter (108-132 VAC/60 Hz, United States)

  for my Palm Tungsten E2, as I looked over the other Forums that back as far as 2005 noone seems to have an answer

  so now that it's 2008, someone had a bit of luck to find this cable?

  Thank you very much, I had no idea that this cable would be so hard to track down...

  Try Amazon.com...

  They're for 0.66 each!

  Amazon Hotsync cable

  WyreNut

  Message relates to: Centro (AT & T)

• Hot sync cable

  Where can I find and buy a sync cable hot replacement for my Palm Z22, please?  I seem to have lost my original one and can't find anywhere.  Thank you, Malcolm Massie - [email protected]

  You can find Palm HotSync cables for only a few cents on amazon.com...

  WyreNut

• Why do I need to sync my phone?

  Hello

  I just bought a Palm unlocked yesterday, so I wonder if I need to sync it. I'm not familiar with it so

  Please tell me like what is the point of synchronization. In addition, is the phone must be in sync to be useful?

  Thank you

  The phone is not 'have' to sync, and you don't need to do in order to to use.

  However the glitches happen synchronization backup your device on your computer.
  Now, one thing that can happen is that you might need to reset hard your device in order to solve a problem that has begun to happen, either by installing a third-party application or the corruption of the device, if you do not have saved you data and then he's gone good.

  I suggest you back up your data as many times as you add important things, if you have added once a week, then once a sync of the week is sufficient, however if you have a device that is designed for professional use so you can watch in doing daily things synchronization.

  If you don't want to bother with this path, I would backup your device up to a SD card with a program called NVBackup

  Message relates to: Centro (Sprint)

• I need a midi cable or both, in order to synchronize the hearing with an external hardware sequencer?

  Going to buy cables, I was able to synchronize the hardware sequencers as a slave to the hearing, but could not make hearing a slave (despite the cable around switching and changing settings in the program and equipment).

  I read the manual, I don't understand it is very confused on this front.

  I don't want to use just smpte MTC.thanks, if someone could guide me through the midi-sync configuration which would be greatt!

  SteveG says, the problem you describe is inherent in all versions of hearing (and the CEP prior to that).  This software has been designed and developed to be a WAV editor.  He is very strong for this; in fact he and far has the best tools out-of-the-box to any editor regardless of market prices.  That's why I bought initially CEP 2.0.

  What I wanted to do was similar to what you describe: 'steal' titles (or parts of titles) of autonomous DAW (Yamaha AW2816) in CEP by using the ADAT interface. change the WAVs; then return the versions published in the 2816 to mix.  What I saw was exactly the problem you describe - there is no way to obtain the SMPTE or MTC to precisely synchronize the two.  I could have dealt with latency, but the worst was that no two transfers were the same - there is no consistency of an amount of compensation which would be introduced in each transfer, so I will need to align the WAV or group of WAVs with each transfer.

  I had to adjust my workflow to compensate.  First of all, there is no way to treat accurately with portions of a full WAV, so I would transfer the whole titles.  Then I would put 5 seconds of silence at the beginning of the track to allow ' chase/lock' and also add a "sync" for each track so that I could use as a reference for aligning the trails at hand.

  The main reason I upgraded through versions of Audition was looking for this elusive synchronization function, since I am very happy with the features of each version CHANGED.  Alas, I long abandoned the hope that this "exact timing" function will work NEVER properly, but as I say, that does not detract from the main function of the software.

  YMMV

  -Dean

• Need help syncing wake up my IPAD to get email

  I have an IPAD and we are trying to sync my IPAD with my thunderbird email so that I can get the same emails I receive on my computer on my pad.

  You need to know if the iPad mail client and servers account support IMAP. Set up your accounts in Thunderbird and on the iPad to use the IMAP protocol, and they will see the same folders and messages. Synchronization is using a common base of messages on the mail server.

  You have no need to do whatever it is precisely the link or synchronize the iPad and Thunderbird. You just put the two up to look at the same server.

  https://support.Mozilla.org/en-us/KB/IMAP-synchronization

• need a HDMI cable to connect to the macbook pro via port USB - C

  Could someone please indicate what cable or adapter I need to run my MacBook Pro to a TV movies? It connects on the port of lightning or another? Thank you Jude.

  No MacBook Pro has lightning ports or ports USB - C.  Most have ports Thunderbolt, and some have even regular HDMI ports.

  The adapter you need to depend on the exact model of MacBook Pro you have.

  Until we can tell you what cable or adapter you need, you must tell us what model of MacBook Pro you have.

  You can watch in the Apple Menu-> about this Mac, option and after the year of model here.

  How to identify MacBook Pro - Apple Support models

• I need to sync to a new computer with a motorola atrix

  I bought a new computer, and now all of my favorite Office are available only on my phone Motorola Atrix. I have the sync key that has been used when I created the mobile, but none of the synchronization of the directions address back on the desktop.

  Thank you
  Lori Peyerk

  You will need to synchronize the user name, password and key to download the news of synchronization on your new computer.

  Firefox button > options > sync

  • In the add a device screen, click on I don't have the camera with me.
  • Then, enter your account name (email address) and password, Sync key click

• K450e - Wifi problem - suddenly needs an ethernet cable.

  First of all, sorry if I posted this in the wrong section. I am known on the Lenovo Forums. I have a Lenovo K450e computer desk and internet is upward. All of a sudden, the Wireless does not even pop up. Until today, I was able to connect to internet wireless and now it says I have to connect via an ethernet cable. I was wondering if anyone else has made this experience and if anyone has solutions. Thank you!

  Mod edit: System model added to the front of the subject line to improve visibility / clarity.

  Turns out I have just needed to update my driver, but needed to connect to the internet via an Ethernet cable to do this.

• Pavilion dv6 1108sl: Pavilion dv6 1108sl - need for new cables sheet FFC

  FFC 6pins and 9pins ribbon cables that connect the power button and the audio controls on the keyboard to the motherboard are broken.

  Can you give me the exact specificactions to get new cables, as they are not presented in the shop "of HP spare parts?

  If you look here, there is enough of several alternatives: http://www.digikey.com/product-search/en/cable-assemblies/flat-flex-ribbon-jumper-cables/1573391

  I know that they are 6pins and 9pins, but apparent what the length, waist length, thickness, style of endpoints, etc.?

  This forum is my last hope, as the official support of HP is inadequate emberassingly (those incompetent have absolutely no idea what I'm talking about, or the ability to speak in an understandable language without automatic translators!).

  These are the parts you need:

  (2) the switch cover (includes LED card and cable) Moonlight White (replaced by 571747-001 on certain models) Onyx 512829-001 001 518110 Moonlight White (replaces 518110-001 on certain models) 571747-001 Espresso Black (replaced by 571757-001 on certain models) 518790-001 Espresso Black (replaces 518790-001 on certain models) 571757-001

  (3) the power button for computers with a discreet graphics subsystem memory (includes cable) 512835-001 of the power button for computers with memory of graphic subsystem UMA (includes cable) 512834-001

  HP does not identify the cables as a separate part number, unfortunately, and I doubt you'd find anyone who wants to sell it like that.

  Here is for example the Commission affects the cable on eBay:

  http://www.eBay.com/ITM/HP-512835-001-power-on-off-button-circuit-board-w-cable-discrete-DV6-series-/151774362025?hash=item235674f9a9

  These guys have a lot of tips power button so perhaps you could talk to them by sending just a cable or even a picture.

  After back and let us know the color of the switch cover you need and maybe found, too.

• Where to buy the USB sync cable

  Well, I'm Portuguese and I bought a Sansa Fuze. But shortly after that I lost my data cable USB Sync/Charge. Where can I get another? (it would be nice if it didn't ruin my camera, as those who are sold on amazon;) (D)

  Thanks for your time.

  EdAuty wrote:

  Where can I buy a usb cable that came with the mp3 player?

  As mentioned in the post just above you, you can get them on Amazon.com or even the Sansa store.

• usb hot sync cable

  instructions on how to crank this puppy up to say 'hot-sync usb cable-press '. No gots! Musta been lost 08/05. Anyone know where to find?

  The Z doesn't have a cable with a hotsync button. The unit is provided with a tap of the screen to hotsync. It should look like two arrows going in a circle by chasing each other. Connect the USB cable provided with this device and click on this icon.

• I need to sync bookmarks between Firefox Sync and Seamonkey. Is this possible and if so how?

  I use Firefox and Seamonkey, as well on the same computer and also on other computers. I would like to use Firefox Sync to synchronize bookmarks between Firefox and Seamonkey on all my computers, but I do not understand how to do this, because the browsers seem to use their own separate servers.

  Is this possible and if so can you tell me how to put in place.

  Thank you.

  I understand the confusion!

  I'm not a Mozilla support person, but according to my experience, synchronization must be called Sync in Mozilla, Firefox or Seamonkey Sync...

  If you create an account in Firefox, this account is accessible to Seamonkey.

  According to the instructions of Mozilla in Firefox, you open 'Options, sync, add a device' and in Seamonkey "sync Setup, I already have an account. The text here is a little confusing because you have to read 'I already have a Mozilla sync account', otherwise, you tend to think that it involves a Seamonkey sync account...

  Then click 'connect' and Seamonkey then provides three fields of characters that you enter in the appropriate fields in the dialog 'Add a device' Firefox.

  I think it's confusing that in Firefox, the server is called 'Server of Firefox Sync' and same Seamonkey offers a "Seamonkey Sync Server', which suggests that they are two completely separate entities, not connected.

  I hope this helps!