Hot sync cable

Similar Questions

• usb hot sync cable

  instructions on how to crank this puppy up to say 'hot-sync usb cable-press '. No gots! Musta been lost 08/05. Anyone know where to find?

  The Z doesn't have a cable with a hotsync button. The unit is provided with a tap of the screen to hotsync. It should look like two arrows going in a circle by chasing each other. Connect the USB cable provided with this device and click on this icon.

• Tungsten E2 how do disconnect the USB hot sync cable without damaging it?

  I just got my Palm two days ago. After the loading of the next day, I got the software loaded and to implement the E2. After the hotsync, I couldn't unplug the cable from the Palm. I didn't force of fear that I would be damaged. Is there a trick? Can someone please help?

  There is no trick. It is very hard for the first few times you use it. Just pull evenly and it will be fine.

  Post back if you have any other questions.

  Message is about: Treo 800w (Sprint)

• Hot Sync Windows

  Had to replace my Zire 72 with unit which worked OK and was able to hot sync both units. Did a master reset and get message when trying to hot sync: "the connection between your handheld computer and the desktop could not be established. Please check your configuration and try again. "Replaced by cable and different usb port used, checked the parameters of conduct and selected user name (but could not find the way to set the user name on the Palm device). DT Palm has two entrances, one for each of the data of the old and the new unit.

  Need help

  Now works. I experience the import/export function and set up a user name 'test' on the desktop.  Contacts exported from the file on the desktop 'test '. After this hot Synch worked without any problems. Science is not wonderful?

• Try to get my Centro to Hot Sync with my new Dell with Vista!

  I just bought a new computer and assume everything I had to do was download the latest version of Palm Desktop 6.2 and outlook 2007 and plug it in with my USB and click on the hot sync button. I get "driver software for your Palm Treo 680". My phone is a centro (I use a palm Treo 680 USB cord, but it worked on my last computer). It is said, insert the floppy disk provided with your phone, but the disk is not moving the problem at all. Any suggestions?

  What version of Vista?  32-bit or 64-bit?

  If 64-bit, you cannot synchronize via a cable.   There are number of threads of instruction at the top of this section relating to synchronization with Vista64.  One possible way is via BlueTooth or Infra-red...

  WyreNut

• Hot Sync freezes on the calendar... Centro (sprint) & Windows XP

  Hope you can help... have you tried most of the suggestions thread.   Hot Sync & Palm Desktop (v6.2) worked without problem.   Palm Desktop has suddenly didn't show no data in Contacts or calendar.   Subsequent attempts to Hot Sync froze during the synchronization of calendar.  After reading the discussion over there, I followed the procedures to uninstall Palm Desktop (including registry changes).  Re-install the v6.2 met Frost even during the first attempt to Hot Sync.   Uninstalled v6.2 new & re-installed only the older version of office provided on CD-ROM.   Same result during the first HotSync (a gel or a continuous loop during the calendar sync... no error codes displayed).  My unit features: Centro from Sprint with software v1.08 (operation without any problem).   Specifications of the PC: Windows XP Pro with Service Pack 2.   Hot sync with USB cable connection.

  Additional comments: my HotSync problem is now solved.   If you encounter a similar problem, please read the following threads for the solution.

  you have a corrupted calendar that is why, if hangs on the calendar/Agenda during hotsync

  You may need to use the DBfixit software on your phone...

  Message relates to: Centro (unlocked GSM)

• PAML pilot Tungsten E2: Tungeston E2 Hot Sync Palm

  I cannot Hot Sync my Palm Tungsten.  Error message indicates that the program is mising PalmCmn.dll.  I have canoe retype the software disk.  Any ideas?

  Why can't you "enter again the software disk"?  What does that mean?

  Looks like you need to uninstall/reinstall Palm Desktop.  Be sure to back up your files before dping then!

  WyreNut

• HP Pavilion 14 inch laptop: Palm M500 hot sync with 8.1 Windows 64 bit

  I have installed my software Palm Pilot M500 (from the original factory CD) on my HP Pavillion Lap Top. However, the hot sync fails and I get the following message: selected The COM7 Port is not available.  Hot Sync Manager will open port when it becomes available. »

  Suggestions, how can it clears and the hot sync enabled?

  It is a system of exploitation of 64-bit Microsoft Windows 8.1.

  Thank you

  You will need to:

  1. install Palm Desktop 6.2.2 (search for one of Wyrenut sons, where he links to it, a recent reshuffle of the forums by HP removed the stickied thread that kept the top of this forum where it was easy to see);
  2. Install the Aceeca 64 bit drivers (also doing a search here for synchronization with windows 64-bit); and
  3. install PalmHotsyncSetup of www.pimlicosoftware.com , which should make your M500 more compatible with the latest Palm Desktop.

  Good luck.

• Tungsten T3 Hot Sync in Windows 7 Ultimate 64-bit and WIndows XP mode

  I've upgraded to Windows 7 Ultimate 64 bit and now my Palm T3 will not be synchronized.  I downloaded desktop 4.1.4e 6.3 and 4.1.4. I tried all three in both windows 7 and windows XP mode that tells me is a 32-bit o/s but I'm really not sure.  I tried to hot sync in bluetooth in windows 7, as the T3 and laptop connect but he always tells me that the port is used by another program? Does anyone know what I have to do to get it to sync or am I've sentenced to throw my faithful T3 out? Any ideas?

  Hello eaglesfan723 and welcome to the forums of Palm.

  The Tungsten T3 HotSync driver is not 64-bit capable, this is why you can't get the T3 to HotSync.  Please read this thread to learn more about your options with Windows 7.

  Alan G

• Sony clie hot-sync with Palm desktop on Vista (32 bit)

  I got my Clie TH-55(Palm OS 5.2.1) for some time now, say 2 years, but recently, I made the switch to Vista (not by choice, I got a new laptop for free). I had been synchronize my CLIÉ Palm Desktop and so when I got my new laptop, I went and download desktop 4.1.4e in the hopes that I could continue the sync on vista. The installation went well, it is, I can do a hot sync but none of my data transfers. If I create a new contact on my handheld, it will not be displayed on the desktop and even vice versa. When I check the hot sync log, it says that there are no errors. I didn't know if I should go to the forums of Palm or Clie forums so I apologize if this is no longer a Clie problem which should be in the forums of clie. Thanks in advance...

  
  

  Message relates to: None

  I found the problem, it had to do with the running of the Office to palm as an administrator. Once that I thought that was the problem, I put it to always run as administrator.

• Hot Sync does not

  When I try to Hot-Sync, that's what I get:

  HotSync operation ended up. Some of your data was NOT saved.  Out of storage space during the update of database-MemosDB-Mmtp-abandonment sync.

  How can I fix it.  The Palm OS system is BEST done planning, I can't live without it.  Thank you, Michael

  One thing you might try (if you have not already done, sorry if it has been discussed in this thread and I missed it), is to make a "uninstall own" Palm Desktop, followed by resettlement.  Then Hotsync.  Take a look at this thread.  It is to change your computer's registry, so be very careful.

  I don't think that the amount of data in your calendar is the issue, despite any errors that you have found.  It seems more likely that there is corrupted data.  But it is handheld against his memory capacity?  Check by typing the time in the top left of the main screen of Launcher to open the Menu, and then tap Info which will tell you how much free space is on the device.

  Try to hard reset the device, and then restore from NVBackup.  HotSync and see what happens.  Data in NVBackup, as long as you don't accidentally erase good backup, you're always minutes from restoring your data and try something different.

  6 appointment of Pimlico Software will allow you to purge calendar events more than any date you choose.  So you can unload on the handheld calendar events that have more than, say, four years and keep everything that is more recent.  6 appointments is (was) probably the best, most versatile and most awarded third-party Palm OS application.  Last time I looked, they were offering it at a discount.  There is probably also a free trial, but I've not really looked at who lately.

• Charger AC/DC & Sync Cable Questions

  New clip + owner here. Two questions:

  1.), I have a charger that goes to my wifes Motorola cell phone. I see that the connector plugs into the clip +. Is it safe to use with it? It will harm the battery somehow? I didn't know if it was too powerful for her, or if the clip + simply 'take what suits him.

  2.), I have a sync cable that goes with my digital camera from pentax. Same connector as the clip +. Would be - this acceptable to use? It is longer and more flexible.

  Thank you

  Eric

  speedythecat wrote:

  New clip + owner here. Two questions:

  1.), I have a charger that goes to my wifes Motorola cell phone. I see that the connector plugs into the clip +. Is it safe to use with it? It will harm the battery somehow? I didn't know if it was too powerful for her, or if the clip + simply 'take what suits him.

  2.), I have a sync cable that goes with my digital camera from pentax. Same connector as the clip +. Would be - this acceptable to use? It is longer and more flexible.

  Thank you

  Eric

  Both the charger and the sync cable should work very well.  Any connector mini-USB 5-pin works with the Clip and Clip +.  Also, make sure that the charger is 5V.  Anything higher than 5V could be a problem.

• Double list appointments on nursery hot sync

  For some reason, my hot sync hangs up on the Agenda because it is listed twice and therefore allows to synchronize the first and stuck on the second and I have to finish with the Task Manager and unplug the Centro to break out of a loop is in.  It comes from start so not sure what is happening.  Worked fine at first. If anyone can help... I have a Centro and am using Windows XP Pro and try to sync it with my Palm Desktop.

  Only a configuration option for each pipe in the hot Sync Manager so I can not uncheck.  Finally, I went in the chat room and ended up after a lot of time to do a hard reset and it seems to work at the moment but double pipes still show in the hot box sync so it can reproduce.  Thanks for all your help.  I can just pay for the dbfixit and try that again.

  Message relates to: Centro (Verizon)

• ZIRE 21 hot sync is not compatible with vista 64-bit program

  ZIRE 21 hot sync is not compatible with vista 64-bit program - apparently it will work with 32-bit vista.  Is there a way to create a 32-bit only for the Zire 21 program without compromising the rest of my 64 bit OS computer? That's what Microsoft sent me. The help for this program was created in Windows format help, which was used in previous versions of Windows and it is not supported in Windows Vista.

  For more information, see Windows Help program (WinHlp32.exe) is no longer included with Windows on the Microsoft Web site.

  Laughing out loud

  You cannot change part of a 64 bit of Vista in 32-bit OS.

  32 bit and 64 bit OSs are completely different operating systems.

  See you soon.

  Mick Murphy - Microsoft partner

• Hot Sync with Outlook

  Hi all

  I recently had to reinstall Outlook and now I can not preform a Hot Sync.  The message I get is unable to connect with Outlook.

  Any ideas what I am doing wrong?

  Try to move in sync with Palm Desktop then back to sync with Outlook.

  Message relates to: Palm Z22