Dock freezes on shut down

Similar Questions

• Media Player freezes then shuts down when scrolling through my music

  When scrolling through my music on the media player, about half way through, Media Player freezes all then stops.   I uninstalled and reinstalled several times without success

  You get an error message? If so, please post the full text.

  If WMP crashes, then please send the technical details of the accident here. Go to start - run, type eventvwr.msc, and then press Enter.

  In Event Viewer, access to the application log and look for an error in the list, there should be two entries for the last crash. Double-click on these two events and copy/paste their description in your post.

• My Mac freezes on shut down.

  Seems to be related Finder because it won't restart.  Suggestions?

  Make sure that OS X is updated.

  Open system preferences > App Store, then click on: check now

• Satellite 1135-S155 beeps + freezes and shuts down... Help, please!

  I have a Satellite 1135-S155 beep constantly, nonstop beep, and beep about 30 seconds it stops.

  Help, please.

  Thank you

  FS

  Hi Fausto

  It is not easy to say what he can be, but in my opinion, it's a hardware problem. Contact the Service partner and leave check your laptop.

• The 'Search' function on the start menu does not work. It seems to freeze and will not even close until I have shut down the computer. What can I do to correct this situation?

  I tried to use the "Search" function to locate a specific file.  The computer froze... not allow me to cancel when I realized that it wasn't working.  The only way I could get the closing of the window had to shut down the computer.

  Hi DyleAcker,
   
  -Search function work is no problem earlier?
   
  Run the troubleshooter from the link given below and if it helps to fix the problem:
  Fix Windows Search when it crashes or shows no results

• Pro Late 2011: Force Quit applications or shut down/restart computer.

  Cannot force quit applications (happened with several applications, five9, firefox crash reporter, etc.). Basically, if the application has stopped responding, can not force quit or remove the dock or anything like that. Cannot restart or shut down computer either. I'm stuck with inadmissible apps in dock to the computer press the power button to stop / stop.

  Tried Terminal without any result.

  MacBook Pro (15 inch, late 2011)

  Intel Core i7 2.2 GHz

  4 GB 1333 MHz DDR3

  Intel HD Graphics 3000 384

  What are the circumstances?  Just update to 10.11.5?

  Software Tablet Wacom has been known to cause these problems to the

  Uninstalling Wacom

• iMac won't restart or shut down after having been 10.11.5

  He said title. My iMac was fine before the update came through yesterday. I went to reboot tonight because the RAM used was realllllly high and I thought a solid reboot after update from yesterday could be a good thing (don't ask why - just my logic)... and surprise! -He has authorized the menu bar and leave viewfinder, but would not closed at all. I could always use the dock to load and use applications. I saw another thread that mentions deleting stuff from Wacom. I went and emptied all of my items found from Wacom. Still will not be closed. I have reset several times VRAM. I can do a forced shutdown, and he'll sleep ok. Activity monitor shows nothing super weird, even if it always shows Wacom and Tablet drivers running.

  Anyone else running into this? Or have an idea?

  Please?

  Hello..

  Safe Mode boot removes the system caches that can help after an OS X day or level.

  Upper left corner of your screen, click on the Apple  > Shut Down.

  After your Mac stops, wait 10 seconds, then press the power button.

  As soon as you hear the startup tone, hold down the SHIFT key. You must press the SHIFT key as soon as possible once you hear the startup tone, but not before.

  Release the SHIFT key when you see the gray Apple logo and progress indicator.

  Once you are in Mode without failure, return to the menu Apple . In the drop-down list, click: reboot

  On Safe Mode

• Satellite Pro A200-PSAE4E - computer laptop shuts down randomly

  I've had my Satellite Pro A200-PSAE4E for about a year and a half now. He ran very well most of the time, but in recent months he has been stop itself randomly. There is no warning or "Windows is shutting down" he just me using my computer to a blank screen.

  After frustrated with her, I did a full format my HARD drive and started from scratch. This does not solve the problem, and since then, the taskbar freezes. When I click on it I get the error and the hourglass cursor message "Windows Explorer is not responding... "I then have to click"restart", which makes the taskbar disappear for a few seconds before returning (usually without my sound icon).

  The laptop turns off when it is connected to the electric network with & without the battery and when running only on battery, so I excluded all power problem.

  I have considered it heats up too, but I use a block of cooling with built-in fans and has not himself in a few minutes after being hit not 24 hours, so I'm not sure that's the problem.

  Someone at - it ideas?

  I am running WIndows Vista Home Premium 32-bit if that's any help.

  Thank you.

  > It worked fine most of the time, but in recent months he has been stop itself randomly.
  > There is no warning or "Windows is shutting down" he just me using my computer to a blank screen.

  I think that the problem of overheating.
  The fact is that the laptop would be down automatically stops in order to avoid that the pieces of equipment against damage.
  In most cases this problem can be solved very easily. Using a jet of compressed air, you can remove the dust from the cooling modules and fans.
  I clean my fans from time to time, because I noticed a higher temperature and the laptop was a little stronger.

  Check it out mate

• Satellite P20 - 504 shutting down / crashing during playback of Medieval: Total War

  Salvation;

  I run a game program, (Medieval: Total War) that sporadically stops or freezes / crashes my laptop. Sometimes it works OK and sometimes it crashes.

  I think it might be a graphic driver problem nVidia, even if I run other programs of game with higher spec requirements.

  Is there any where on the Toshiba site, I can actually download new drivers? I searched the Toshiba site and found that there is some possible updates but no installation to actually achieve the download itself... confusing.

  Any help is appreciated.

  Rob W.

  Hello

  Can you please check this topic.
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=2581&MessageID=8148#8148

  There is a nice discussion on shutting down / crashing when you play a game.

• Laptop HP Pavilion 15-n073sl: unable to shut down the pc

  Fifteen days ago, my computer (which I've updated for Windows 10 on 16 June) updated itself last built Windows 10, since then 4 times out of 5 I'm not able to close properly.

  I close all the programs the I click on start and closing of the option. It starts to shut, but when the screen goes black, it freezes and stuck there with all the leads keybord and internal fan on so I have to force shutdown by the Start button.

  I spoke with the support of Microsoft and they told me that it depends on the fact that HP has not released a driver for the new version of Windows 10 (build 1607 14393.187 SO).

  ... What am I what to do now? I downloaded the update from the HP Support Assistant software, but it is empty of any update. On the page of the driver of my laptop on the HP site, I found some drivers, but I don't know if I have to download them all, or I don't know.

  Hope for more assistance,

  Thanks to that answer.

  Hello

  Try the following.

  Again, open settings and select System.  Select food and sleep, and then click additional power settings - in the next window, click on "Choose what the power button" in the left pane.

  In the next window, click on "Change settings that are currently unavailable" (close), then Remove the check mark from the box against 'Turn on a quick start (recommended) '.  Click on the button Save the settings, and then close all open windows.  Stop the laptop by right clicking the icon in the Start Menu, select prompt (Admin) and click 'Yes' to the uac prompt.

  Type (or copy and paste) the following command (including spaces) and click Enter.

  Shutdown /s /t 0

  Start Notepad and when reloaded windows, hold down the Windows key and press R

  In the run box, type devmgmt.msc and press ENTER.

  In the Device Manager window, expand System devices, and then scroll to the Intel Management Engine Interfaceentry, cela a right click and select Properties.  Select the driver tab and select uninstall driver - and then proceed with the uninstall.

  Restart the computer and let Windows idle for 5 to 10 minutes just to give time to reload the driver imei.

  Restart the computer again (fast start disabled for the moment leave) and see if it will now shut down properly.

  If so, reactivate a quick start and check if it will always stop Ok.

  Kind regards

  DP - K

• When the unit is shut DOWN Satellite 2400 lock

  My camera is a 2400. Recently, when I try to shut down using Win XP it works until the message "windows will now stop." At this point, the image freezes with the pointer of the mouse in place. I installed a new HD with a new OS Win XP Pro. I downloaded all the drivers including Bios Update. It seems that my English is unsufficent bec I have to install via Boot Bios and turn on I have to hold down the TILDE KEY. What is c? If someone has encountered this problems of freezing closing system and if so what is the remedy? I also found a message from sys telling me the BASE SYSTEM DEVICE has a? What is a BASIC SYSTEM DEVICE?
  I appreciate your help in this matter. TNX and lots of XZEXZ ++? René

  [Edited by: admin on 21 January 06 11:17]

  Hello

  The base system device is usually drive card or PCMCIA slot or both. Some manufacturers of laptop to group a set of drivers and call "Chipset" even if it includes more than the chip set.
  I guess you didn't install the driver chipset or you have it install but in the wrong order. The chipset driver must be installed first.

  Well, windows want to stop because some background processes are running or due to a failed OS. I guess that this problem doesn't occur with the Toshiba Recovery CD because all the drivers are installed properly.

  On the procedure of BIOS:
  Please check this page from Toshiba. You will find an instructions how to upgrade the BIOS.
  IOS http://eu.Computers.Toshiba-Europe.com/cgi-bin/ToshibaCSG/FAQ.jsp?z=234&service=eu&from=faq_selection&CFID=B & FID = TRO0000000b07

  But please note: the incorrect BIOS or an incorrect procedure may damage the motherboard. First, you need to check if the new facility with the restore CD will solve the problem before you start the update of the BIOS!

  Good bye

• Stuck on the screen saying 'Shutting Down' after trying to install SP2 on Vista

  So I got problems with my Windows Vista. The day passed or it would freeze completely, all programs not responding. I looked around, and he said that a possible solution would be to install SP2. So I did. As he installed the first of 3 updates, it got stuck at 44% for an hour. Then, she moved to say Shutting Down, which was during the last two hours.

  I don't know what to do now. During the installation, he said do not put off your computer, and while it is said that is no longer, I'm still hesitant to do. Any ideas on what I should do? In addition, would set the gel I described previously by SP2? Or do you know of anything that could be causing it?

  Thank you

  Free unlimited installation and compatibility support is available for Windows Vista SP2 questions until February 26, 2010. Availability of support chat or messaging differs depending on your location. Some questions may require that more support for which he is advanced a charge.  Go to http://support.microsoft.com/oas/default.aspx?prid=13014&gprid=582034 & select appropriate category (i.e., download problem;) Installation problem; Problems after installing a service pack). ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Impossible to shut down my pc

  I'm not able to shut down my pc. When I click on stop it freezes. I have Windows XP.

  If not already installed this suggestion should be judged first where it takes a lot of time stop.

  Download and install the Profile Hive Cleanup Services user

  http://snipurl.com/1pyo4u [www_microsoft_com]

  A chiselled URL was used to avoid providing a broken link.

  Another suggestion is to look through the advice in the following link:

  http://aumha.org/win5/a/shtdwnxp.htm

  This Article was written a few years ago, but a large part is still topical today for those who use Windows XP

  Hope this helps, Gerry Cornell

• Because the computer may not shut down properly the recovery fails on HP G60-519WM

  1.) product name and number: HP G60-519WM

  (2.) operating system installed: Windows 7 64-bit

  (3.) error message:

  Impossible to restart the computer

  Windows cannot restart the computer in the

  To complete Windows recovery environment the

  recovery operation.

  4.) all changes to your system until the problem was happening:

  I think I have a type of malware or something because my computer started running slower and I continue to be redirected to Web sites randomly when I use Google or Bing.  Records on the right side of my Start menu as 'Computer' and 'My Documents' disappeared.  I also get this an update for Windows live which stops at 57%.

  Problem:

  There is no restore point on my computer if I want to perform a system recovery back to the image of the manufactuer.  I downloaded the USB recovery Flash Disk Utility for my model.  Now I want to recover my computer via USB, but when I run the advanced recovery mode he's trying to restart my computer.  Given that my computer will not shut down properly, I end up having to press the power button until it stops my computer and the recovery does not continue when I start my computer again.

  I tried to use F11, but then I just end up on a screen that says either press on enter to choose to continue with Windows 7, press tab to move to the bottom of the list or press ESC for more options.  I tried all three and they eventually freeze the screen and keys are starting to make a Summit high-pitched beep when I try to press one, so I end up having to force my laptop to stop.

  I also tried to make recovery by pressing F8 and then choosing the "repair your computer option.  Which causes my computer screen go black, and I end up having to force it to close again.

  Is it possible to restore my computer to factory settings?

  Any help would be greatly appreciated!

  JES

  Hi, Jes:

  Yes, it would be the battery.  The relatively heavy bar that is normally removed retainers of slide.

  From what you described, I am afraid that your PC needs a lot of work (probably a bad motherboard), and you'd be much better to buy a new laptop or refurbished, than to pay a lot of money to fix yours.

  I guess you would have to pay more than $200 for repair.

  I'm sorry this is probably not what you wanted to hear.

  Best regards

  Paul

• During "shut down", I accidentally turned off the power strip to the desktop before to close the process finished. This is a problem.

  Since this event, start working normally, but after about 5 minutes the PC will 'freeze' and nothing works.  Even the stop the clock!  I can start and run the PC in safe MODE without any problem, even Shut Down works.  But, in normal mode, if I click "Shut Down", before the 5-minute 'freeze' occurs, the PC hang in the process of closing and never closed and turns off.

  In Safe Mode, I turned off a number of pilots to start, but it did not help.

  I studied 'system restore', but there is NO "restore points".

  Help, please.

  Hello

  Make sure you have the latest vista drivers for your computer which you can get your computer manufacturers Web site

  go to their website and look for a driver and software download section

  Enter your model number for the last look drivers vista then download and install

  also run the sfc/scannow command.

  http://support.Microsoft.com/kb/929833

  Use the (SFC.exe) System File Checker tool to determine which file is causing the problem and then replace the file. To do this, follow these steps:

  1. Open an elevated command prompt. To do this, click Start, click principally madeprograms,Accessories, right-clickguest, and then clickrun as administrator. If you are prompted for an administrator password or a confirmation, type the password, or clickallow.
  2. Type the following command and press ENTER:
     sfc/scannow

     The sfc/scannow command analyzes all protected system files and replaces incorrect versions with appropriate Microsoft versions

  If SFC detects the main problems it can't fix you may need to borrow a Microsoft dvd vista not an acer, HP etc. recovery disk and do a repair installation

  read the below tutorial on how to perform a repair installation

  http://www.Vistax64.com/tutorials/88236-repair-install-Vista.html