Docking station Office attached screen HDMI "disappears".

Similar Questions

• HP 2008 120W Docking Station (KP080UT) Support screen double

  The Station of host HP 2008 120 w (KP080UT) supports two screens?  If this is not the case, what docking station will be?

  I tried to run two monitors connected to the docking station with a portable computer stock HP Compaq 6715 b.  A monitor is on DVI, the other is on VGA.  Single screen works individually on both DVI and VGA, but together, it won't.  The laptop sees there is a second monitor, but when I said "Extend my Windows desktop on this monitor." the first monitor flickers as its going to change everything, but goes back to the single screen.  I updated the graphics drivers and tried with both open and closed laptop.

  Support Online Chat told me that it depends on the graphics card.  6715 b is not compatible double screen.

• T500 loses screen when ejected from the docking station

  At my office, I use a docking station with external monitor (DVI join). If I ejected from the docking station, my laptop screen darkens. The only way I can do it works to turn it off, eject and restart. It works fine then.

  I have the ATI graphics card, and I don't think that the switchable graphics works. Is it possible to use the integrated graphics card Intel when the battery power? This seems to be ideal.

  Any advice will be appreciated.

  Unfortunately windows don't remember installing icons when you switch your resolution. When you change the resolution would pass and spoil your icon arrangement.

• e7240 & docking station resolution problem

  I have my e7240 connected to a PR03X docking station.  My screen (Samsung U28D590) has a recommended resolution of 3840 X 2160, but when I am connected to the via Display Port, then the maximum available resolution is 2560 x 1440.

  I have the latest drivers installed Intel.  Any ideas why I can't get the full resolution.

  Hi, I have the same laptop and I have some disappointing news - Intel's HD4400 cannot handle 4K of the HDMI 1.4 port or DP 1.2. This is set out on page care Intel for processor, whether it is the ultrabook i5 or i7 series. Dell it has capped at QHD I think on the software side, although the integrated graphic card should be able to get out a maximum of 3200x2000@60Hz.

  I hope this helps.

• Sony Vaio Z - improved performance with docking station

  Hello

  I recently bought the sony vaio z at the station and noticed the graphics performance decreases when the docking station is attached. The Windows experience index - I have a rating of 6.5 for the graphics when using the integrated graphics card Intel 4000 and a 6.0 with the graphics card ATI 7000series. Is this good? Is there a setting I should change to fix this? I think that the ATI graphics card is better than the integrated Intel graphics card.

  Thank you.

  Hello

  I recently bought the sony vaio z at the station and noticed the graphics performance decreases when the docking station is attached. The Windows experience index - I have a rating of 6.5 for the graphics when using the integrated graphics card Intel 4000 and a 6.0 with the graphics card ATI 7000series. Is this good? Is there a setting I should change to fix this? I think that the ATI graphics card is better than the integrated Intel graphics card.

  Thank you.

• External monitor like main screen for M200 with docking station

  Hi all

  I have a Tablet M200 with GeForce FX go 5200. I have a Toshiba docking station and an external LCD display. When it is docked, I would use the external LCD as main display and the LCD builtin as the secondary display. (I want the taskbar, icons and newly opened windows on the external screen when it is docked.)

  Unfortunately, I can't find the right combination of settings of this. If I put Windows to extend the desktop on the external screen, "use it as primary display" option is grayed out. I don't get the span horizontally or vertically options in the nView utility, just the Standard and the Clone (and this only if I do not extend to the office.)

  How can I get the external screen be the main while being the internal school?

  Thanks in advance!
  Kind regards

  Levente

  Hello
  What home-unit station use?

  Tablet Multi dock PA3315E-1PRP or Port Replicator advanced III: PA3314E?

  thx for the info,

  Good bye

• iMac Docking Station disappears

  For the first time since I got my iMac, the docking station (which is located at the bottom of the screen) disappears on the bottom of the screen.  I bring my mouse, but when I move my mouse somewhere else on the screen, it disappears off the screen again.

  How to make it 'still on the screen ".

  "There is a setting for that."

  I'm not a Mac expert, but I think you can click on the Apple icon, choose the Dock, then hide shut down.

  Moreover, it is just "the Wharf".  A "floor" is usually something you plug in your laptop computer on your desktop.

  -Christmas

• PROTECTED R700 on docking station / command screen

  Hello

  I'm on a Toshiba protégé R700 on a docking station and I have problems in installing the screen of the built-in or external.
  Is it really necessary to press FN + F5 to switch the view when the apparatus?

  My scenario:

  Laptop on the dock, using external display
  Stop Windows XP
  Undocking
  Laptop computer startup
  Enter my Login of Win XP on the logon screen
  Built-in screen turns black

  After that I have to press FN + F5 blind or are anchored the laptop to change the setting on my external screen.

  > Is this really necessary to press FN + F5 to switch the view when the apparatus?
  Hmm Yes it of necessary to press FN + F5 to switch back to internal laptop display if you have previously used the external display

  The Fn + F5 switches between the internal and external screen... so you must use this option if you want to reuse the internal laptop display.

• Tecra 720cdt: screen is central docking station - 1/2 in.

  Hello

  Ive just took a Tecra 720cdt with docking station, when the 720 is on display of the battery is ok, when the screen docking station is central 1/2 in. I downloaded drivers but how and what driver do I need to use to reset the docking station for produce size full screen?

  Thank you.

  Windy morning

  As far as I know if you use the right display driver should not be a problem. As far as I know, this unit comes with Win 95 and you can find the right driver on the Toshiba download page. What operating system is running on your device?

  Check also displays the properties on the settings tab.

  Good bye

• T520: Unable to support more than 2 screens? (via the docking station)

  All,

  I have a problem, allowing more of 2 monitors. My T520 is connected to a docking station that has two outputs digital video that are connected to two monitors NEC.

  For some reason any when I go on Windows | Display settings | It does not allow me to activate all three display at the same time. Can I have one) two monitors on the computer screen or b) + 1 monitor.

  Whenever I tried to connect to the 3 screen, it automatically shuts the screen 2.

  Other colleagues with T420 not experience this problem. The T520 & T420 uses the same docking station so I don't think that is the question.

  My first thought is to update the video driver that I did but still does not. The T420 has a nVidia card while T520 has an Intel processor on board one.

  If anyone has any suggestions that would be great.

  Thank you

  T520 with Nvidia Optimus can support up to 4 screens, while as the T520 with intel only the graphics card can support only 2 screens.

  If you need more screen support on the T520 of yours, you may consider usb2dvi, eGPU, Vidock.

• X 200 with ssd OCZ blue screens at the start of the docking station

  The 200 x blue screens when the startup of the docking station. If I take the laptop to the docking station to start and then once booted dock the laptop is fine.

  The issue started happening when you I upgraded the laptop form a SSD OCZ vertex 2 drive from xp to windows 7 and installed.

  I tried to update the firmware on the ssd using this utility

  http://support.Lenovo.com/en_US/detail.page?LegacyDocID=MIGR-69806

  The program showed that my ssd was running firmware version 1.29 and that he did not need to be updated.

  I also tried to update the x 200 to the latest version of the BIOS. Nothing seems to work.

  Any ideas or suggestions are greatly appreciated.

  Windows 7 does not start a compatibility. I solved the problem by returning to a mechanical drive.

• Can I use 2 monitors + laptop screen? Latitude E5530 (HD 4000) with E-Port over Docking Station

  Hi Dell Community.

  I for work recently bought a Dell Latitude E5530 with Intel HD Graphics 4000 and an E-Port Plus docking station. Running Windows 7. Currently I have 2 dell monitors that are used with it, but I want to know if it is possible to use my laptop as well screen (3 screens)

  When I try to do it the way regular thanks to display settings it wont let me choose only 2 of the 3.

  I'm wasting my time trying to figure this, or is there a way to do?

  Thanks in advance for any comments

  Ryan

  Unless you install an external video solution non - Intel GPU can lead only two screens at a time.

• Latitude D630 screen resolution changes after no mooring and docking station re

  I have a user with a Latitude D630 running Vista business with an external monitor.  Resolution 1680/1050 the value.

  Stop, UN-dock, take the computer laptop home.

  Lift the rear of the laptop, d-dock, power.

  Now, the resolution is 800/600.

  This notebook is a replacement of his first D630, which had the mobo and other HW replaced until I'm the new laptop as a replacement.

  Tested with several monitors and docking stations.

  Anyone else seeing this?

  
  

• HP Ultraslim docking station: connection HP ultraslim docking station with 2 external monitors

  Hi, I plan to donate a station host and two monitors to my husband so that he may set up a job at home for its HP Elitebook 840. I would be very grateful if someone can tell me if the HP Ultraslim to home station is compatible with monitors that I have chosen, the dell U2414H. its specifications are 2 connectors HDMI MHL, 1 mini dp 1 dp 1. 2 a, 1 dp MST, 4 USB 3.0 downstream ports and 1 upstream.

  Could someone tell me if I can put in place two of them with the docking station HP Ultraslim, what is the compatibility and what extra cables or adapters, I will need to make them compatible.

  Thanks a ton.

  Do you know what version of the HP Ultraslim Docking station you have?    There are a few specific changes with regard to the 2013 generation from the dock where the docking station has 2 DisplayPorts x instead of an earlier version that had a display port and a VGA.

  If you have the later generation of 2013 docking station and 2 x DisplayPorts, these monitors should be fine.  And you should of course two displayport cables to use with monitors (screens could come with them, but very sure they do).

  The 2013 model looks like this (2 ports to the right of the network socket):

  http://ECX.images-Amazon.com/images/I/61ZSGNoW0sL._SL1500_.jpg

  Whereas the old model looks like this (one DisplayPort, next to the network socket):

  http://content.hwigroup.NET/images/products_xl/172474/HP-UltraSlim-docking-station.jpg

  If the monitors do not come with cables, I highly recommend Monoprice.com as your source for people or ALL wiring.   The link below is for 3 feet of long cables, but according to available to his office, you can cable of 6 to 10 feet.  Below is an example:

  http://www.MonoPrice.com/product?P_ID=13359

  WARNING: I have seen several users posts on the forums here and outside hp directly complain that there are a number of questions using 2 monitors x DisplayPort, even with the 2013 version of the dock.  There is firmware available for the dock updates that help.    I wanted to just throw that out there because he's hit ' n Miss as to whether they work with multiple monitors, and because these screens have no VGA option, you cannot workaround to use VGA and DisplayPort (instead of 2 x DisplayPort) to make it work.

  Brian

• HP ZBook 15 G3: BSOD when connecting to the HP Elite Thunderbolt 3 docking station

  I recently (yesterday, 16/08/16) began to experience the dreaded Blue Screen of Death, whenever my laptop is connected to my HP Elite Thunderbolt 3 Dock.

  The machine is a HP ZBook 15 G3. It was connected to the docking station for more than a month without this problem. I don't know why at the time because I don't remember any updates or new software before that happens.

  The dock is connected to 2 x monitors via HDMI cables and an ethernet cable. I connect a mouse and wireless keyboard to a USB3 port on the laptop.

  If the dock is connected to the laptop at the start, he reached the login screen front of BSOD. If I start without it connected, it will be BSOD a few seconds after connecting the dock. He never to the point where the monitors display anything. It can be started with the dock connected in Safe Mode, as it seems to disable job.

  I've updated all the drivers and BIOS (including download the Softpaq Download Manager), but there has been no change. I have also updated the NVIDIA drivers to the latest version without change.

  What should I do next to solve the problem?

  Did you analyze the dump files, they said?

  I would also like to update these:

  Intel's Thunderbolt sure Connect utility (15.3.40.275)
  Thunderbolt from Intel for the Dock Thunderbolt from HP (16.1.7.0.8) Firmware update
  ASMedia eXtensible Host Controller Driver (1.16.35.1)
  ASMedia ASM1042A Firmware Update for HP Thunderbolt 3 Dock (131025.10.11.23)

  More BIOS if you're not on 1.09 or 1.10, some people say that they have problems with 1.10, so maybe try downgrade to 1.09.

  You can also try experimenting with the 'Thunderbolt security level' setting in the bios security switching No. If it is authorized by the user, or vice versa.