Document scans and prints in portrait mode, when I record it is in landscape

Similar Questions

• LaserJet 1536dnf: unable to scan and print 2 documents through the ADF faces

  I'm currently scanning and printing, two documents faces through the ADF. I went through the controls on the printer to get the "copy" menu and select the duplex option, press ok.  Then looked for "type of copy. The only choice I have is 1 to 1 side and 1 or 2 sides. According to other posts, there is No '01:58 back!

  Hello

  It does support duplex scanning. You have to do manually

  Kind regards.

• Keyboard for blackBerry Smartphones stuck in portrait mode when writing and reading messages

  Hi all

  I really hope you can help me solve my problem. Since a few days, my keyboard is stuck in portrait mode when I'm in the Messages menu. No matter what I do, it cannot switch to see the landscape. I tried to rotate in all directions, but without success. Apart from the Messages menu, the keyboard orientation changes as it should. But at the time wherever I press the Messages button, the display immediately switches to portrait. Apparently I blocked it somehow, but I can't unlock it now. I tried all the options, I changed the sensitivity of the change of the screen, but nothing. It's really boring to write e-mail messages using a SMS keyboard. Can someone give me advice how to restore the display of the landscape keyboard?

  Thank you very much in advance.

  Hi and welcome to the Forums!

  Whenever random strange behaviors creep, the first thing to do is a battery pop reboot. With power ON, remove the hood back and remove the battery. Wait a minute, then replace the battery and cover. Power on and wait patiently through the long reboot - about 5 minutes. See if things return to functioning. Like all computing devices, BB suffers from memory leaks and others... with a hard reboot is the best remedy.

  Best!

• PSC 1210 all-in-one: hp psc 1210 order copy but scan and print

  Until recently the copied PSC 1210, scanned and printed.  It copies is no longer in black & white, or rather when I press the copy button, the scanning starts and the printer prints a blank page.  Without moving anything, I can scan the document (Windows Fax and Scan) and print it using the same PSC 1210 and it prints perfectly.  A color copy prints a few characters in blue/green.  No recent change in hardware or software (other than the Microsoft updates).

  Hi @will-not-copy,.

  Maybe the problem is related to the ink, especially the black ink. If I understand your description that you can scan and print again, but you are unable to copy. Copying and scanning use the same hardware components so ideally if we work so should the other. Copy and print using the same ink system so if you can print, you should be able to copy; However, the impression of the computer may produce a composite black, which means that the colors combine to make black, when copying the printer can pull out the black cartridge to produce black. That's what I mean when I say that the problem might have something to do with the he black cartridge.

  I would like to print a self-test report to see if the printer hardware can produce black ink in stand-alone mode. To print a report, use the following steps:

  1. Load the plain, white paper into the paper tray.

• HPLaserJet pro mfp m125nw: Smartphones using scanning and printing

  Hello

  I want to buy a printer hp laserjet mfp m125nw pro. But I want to know is - it possible to use android and iOs smartphones to connect to this device for scanning and printing files? If so, how can I do? Is there any application to do this? This device has an internal ethernet and wireless adapter?

  Thank you

  Hello

  Your printer supports AirPrint and ePrint:

  http://support.HP.com/us-en/document/c04086790

  You can print and scan using few applications especially HP AIO Printer Remote app, print and scan as long as your printer and other devices are on an SAME network. Please use Apple Store or Google Store/game to install the application above and you can use this application to scan (and print).

  Kind regards.

• My F4135 printer cannot scan and print from a copy

  With the help of windows xp I can't copy a scan and print

  Hi Muzzik,

  You can only print from Web sites?  Have you tried to print just a black paper as that of Notepad?

  I think that the best way to start is with the basics on this one.  Here is a link to a document from HP to make a copy on this model.  If these steps do not work, then we can continue.

  http://support.HP.com/us-en/document/c00853058

• print in portrait mode

  I try to print in portrait mode, but for some reason I can't

  Here is my code:

  Here is the code:

• HP 8620: Printer in offline mode when the computer starts

  My 8620 Officejet is offline.  It is connected via a cable to my 360 spectrum HP network.  When I turned off the computer and start that he even once, the printer starts in offline mode - for example, when I got to print from Microsoft Word (Office Pro 2016), the printer is 'offline' in the Word print dialog and I get a message from Windows system, saying printer offline - and nothing prints.

  I can solve it with the help of HP print and Scan doctor.  But if I closed the computer and start it up again, it is new offline.

  I can fix this by going to the printer by pressing the button on the front power off and then restarting it - the document in the print queue print immediately.

  Also, if I start the Server Web part, select 'Tools' and then click 'Print a self Test Page', the page prints as usual. However, if I then go back to Microsoft Word, the printer remains offline.

  HP Printer Wizard starts well and the analysis of function of Document or Photo works very well.

  It's just the feeling that is not.

  Any ideas gratefully received.

  Thank you
  Philippe

  Hi @Philip4,

  Welcome to the HP Forums!

  I noticed that your HP Officejet Pro 8620 keeps going offline. I'm happy to help you!

  Please, try the steps in this guide, "offline" Status Message printer (Windows 10), as well as this guide, the printer is not maintaining the wireless connection.

  If this, or one of the posts on this thread, helped you to solve the problem, please click on accept as Solution on the message. To show you 'like', or that they are grateful for my post, please click the thumbs upwards below. If there is anything else I can do to help, please don't forget to let me know!

  I hope these guides help!

• HP Officejet 4632: Scanning and printing photos

  How many pages it can scan simultaneously? Is there a certain type of photo paper that should be used with this printer?

  Hi @Faye24,

  Thanks for joining the Forums of HP Support with your request.

  I understand that you have questions about scan using your HP Officejet 4632 e-all-in-one printer and photo paper. I would like to help.

  There are two ways to analyze, either starting from the glass tray, or by using the automatic Feeder (ADF) of Document.

  You can scan pages as much as you want. The ADF has a capacity of 50 sheets, so able to load 50 pages up there, if you had to.

  The big glass dish limits you to a single page at a time, but when you scan with the HP software it is a button that allows you to scan and create a multiple page PDF when scanning of the bucket.

  If you need assistance with the analysis please let me know what what operating system your computer is running so I can provide the appropriate documentation.

  When it comes to photo paper, photo paper sizes supported and weight.

  

  HP recommends using HP photo for best results of printing paper. You can click here to see the photo paper HP is available.

  Please let me know if that solves the problem, or if you need assistance.

• Photosmart C4480: Scanning and printing

  When I scan to print printing resulting is a quarter the size of the image or document.   How to set.

  Also, I want to put this printer on the Windows 10 64-bit desktop

  Hi @Fuchsia2007,

  Thank you for joining the HP Forums!

  I understand that when you copy with your HP Photosmart C4480 printer print is a quarter the size of your image or a document and you want to use this printer on Windows 10. And I'm happy to see it for you!

  There are drivers available for this printer on Windows 10. So, when you are ready, follow the instructions in this guide, download and install the driver printer and software Via USB.

  About the size of the copy, please see page 58-61 of the user guidefor your printer.

  If it helps, please consider clicking on "accept as a solution." And, please click the thumbs up icon. The two icons are below this post.

  I hope this information helps!

• I can print in "Portrait" mode but not in "Landscape" mode! " Help!

  Printer prints documents in Portrait mode, but not in the landscape!

  Hello Wayne,

  I recommend to remove the printer and reinsert.

  To do this:

  1. Detach the printer from the PC.
  2. Uninstall the printer from the PC driver.
  3. Re-install the printer driver.
  4. Reinstall the printer.

  Best regards

  Matthew_Ha

• Hp2452: Hp2542 scanning and printing

  Just bought this all-in-one, but can't seem to know how to analyze an element then print it immediately

  @Beatle1

  I don't know any that you can do - at least not with this printer.

  Comment

  The data output "scan" should have a place to go that recognizes the printer.

  The printer can not save the analysis itself (missing the ability of the internal program to do); the analysis should be shunted to a destination, it's a smart device as a computer, which knows how to translate the raw data into a file format.

  Once the data are translated and saved in a format appropriate for the type of scan, and then you can send data to the printer and the printer can present a paper copy of the information.

  Assuming that you have a Windows (or even Mac) computer, you can use the printer software to scan and then save the analysis to the computer data.  You can then ask the printer to print the file made from these data.

  Printer:

  Range of all-in-one printers, HP Deskjet 2542

  Reference (mainly for Windows):

  Install the full features software - printer

  When you see a post that will help you,

  Who inspires you, gives a cool idea,

  Or you learn something new.

  Click the 'Thumbs Up' on this post.

  My answer-click accept as Solution to help others find answers.

• I get startup repair screen when I try to boot my laptop from dell inspirion windows 7, I run the scan and detects any errors. When I ran repair usb key received the error 0x400110020000100A

  I get startup repair screen when I try to boot my laptop Dell Inspiron windows 7, I run the scan and detects any errors. So, I tried to use a USB repair for a laptop Dell Latitude Windows 7 pro and I still can't the computer to start. Tried to restore to the factory settings, can not. I have no image, backups, all missing, restore points?

  After that I tried to launch the USB repair I got 0x400110020000100A error code and I received error (0x8007027E) indicating the device will not start without a reboot.

  Anyone know how to fix this?

  Any advice would be greatly appreciated. I'm not computer illiterate, but am not pro either. Just use them not program them or even understand all languages!

  ____________________________________________________________________________________________________________

  Dell Inspiron laptop about 4-5 years.

  Running windows 7 Home Edition.

  Does not start little matter what I tried.

  If I remember correctly, I looked in MS-DOS mode and noticed that it said something like "x: win...» "that seemed strange to me because I thought that it should say"c: victory... "but as I said I am not a computer wiz so if anyone can help me, I would appreciate it.

  I'm about to rip the hair off my head with my laptop. My latitude was blue planned, surprisingly I fixed it (don't ask how, you couldn't tell). Then my dell inspiron would not start right after my dell latitude fell out of my truck and landed on the sidewalk, wanted to kill the person, the screen is broken. I can use it but it is very difficult, see a mosquito net and not perfectly clear, works well. lol someone knows somewhere or that would install a new screen for a reasonable price? I live in the Boston area.

  Back to the laptop won't start not, when I ran repair USB key received the error 0x400110020000100A

  Hello

  Thank you for the update on the issue. I appreciate your time and effort in resolving this issue.

  You can try the following methods and check if it helps.

  Method 1:

  You can use the Bootrec.exe tool in the Windows recovery environment (Windows RE) to troubleshoot and repair the following items in Windows Vista or Windows 7:

  • A master boot record (MBR)
  • A boot sector
  • A Boot Configuration data (BCD) store

  Note: When you are troubleshooting startup issues by using the Windows RE, you should first try the Startup Repair option in the System Recovery Options dialog box. If the Startup Repair option does not resolve the problem, or if you must troubleshoot more steps manually, use the Bootrec.exe

  Use the Bootrec.exe tool in the Windows recovery environment to troubleshoot and repair startup issues in Windows

  http://support.Microsoft.com/kb/927392

  If the problem persists, proceed to method 2.

  Method 2:

  Please follow these steps:

  1. Tool command prompt open in the mode of the Windows recovery environment .
  2. You will see X:\Sources
  3. Type chkdsk c:\ at the flashing prompt to launch the utility Chkdsk. replace c:\ with the letter of the drive that you want to run the Chkdsk utility. If the hard drive is d:\, then type that instead.
  4. After the "chkdsk c:\. "insert \f command to fix errors on the disk volume or the \r to recover bad sectors and then press ENTER.
  5. Restart the computer once the chkdsk command has completed.

  Note: Running chkdsk on the drive if bad sectors are found on the hard drive, it attempts to repair this sector, if all available on which data may be lost.

  For more information: Please refer to the section of the additional If you can not boot into Windows at all stages in the following link.

  Resolve stop (blue screen) error in Windows 7

  http://Windows.Microsoft.com/en-in/Windows7/resolving-stop-blue-screen-errors-in-Windows-7

  Hope this information is useful. If the problem still persists, please post back for further assistance, we will be happy to help you.

• Error: "can't stand running in portrait mode" when you try to access Windows Media Center on secondary monitor.

  Title: Media center does not open on the main montitor and closed because school is portrait. How can I fix?

  In Windows Vista Media Center opens on my secondary monitor instead of my main monitor. Because the secondary is in portrait mode that Windows Media closes with the message "does not support running in portrait mode. I disabled the secondary and rebooted Media Center which works well, but I don't want to have to turn off my high school whenever I want to get something in the Media Center... always on the second monitor by default. How to run on the main screen, because it won't let me start if both screens are activated. I have to use my secondary back in fashion landscape to move the Media Center to return to the main Setup screen? It's simply ridiculous from the start.

  Let me answer your line by line:

  > Description of the question, I understand that you have a problem with Windows Media Center on the secondary screen. Let me know if I'm wrong.

  Yes. This is what it says in the title and in the body of the text... was it not QUITE CLEAR.

  > 1) you have made any changes on the computer before this problem?

  What does that mean? Who on Earth has a blank computer that has never been touched running on two monitors? Of course, there has been changes? What exactly you want to know?

  I find this question to a complete loss of all time and wonder what kind of political support requires that ask you such a question absurd. Please fell free link my feelings on this topic to your agency for my account.

  (> 2) which monitor do you have configured as default view? (Primary or secondary)

  The primary is the default value. The secondary could be the value by default if I didn't say that Media Center opens on secondary education and not on HAND (Please read this as default, everyone in the world does) monitor.

  > Method 1: I suggest you to change the display in extended mode and check if the problem persists.

  The display was already in extended mode.

  > Method 2: if the issue continues, I would also suggest update you the drivers for the secondary monitor and make as primary while the other monitor is disabled then try to turn the screen and check if it helps.

  Why update drivers would change anything. It would not be... the problem lies in the reporting to the Media Center of the portrait mode, that has nothing to do with the hardware drivers; they report portrait mode very well, thank you. As for making primary and turning, wondering if there is anything that I could do otherwise than to resort to having to play with the settings of the monitor in the query, and I don't have to make primary of all... just back to the landscape and backward Media Center elementary school. This does not work... but should I have to resort to something which is, more or less, a workaround if the problem lies in the Media Center and not my monitor settings? The answer should be no, and incidentally, Media Center, once started and settled in portrait orientation (in windowed mode, otherwise you couldn't move) works fine, as long as you do not close it while it is still in this mode, because then he will refuse to start for no reason other than the programmer who designed it seems not know beans orientation or multiple monitors. It's funny that although Media Center does not default to the main monitor, it sends the message of demolition to this same screen by default.

  To the people looking at the end who will not read everything above... it is what to do:

  Back secondary to landscape mode and launch Media Center. Put the Media Center in windowed (not fullscreen) mode and move it will remind the main monitor... it will require a bit of hocus-pocus with the mouse if you cannot put the monitor physically return to the landscape, try it, you'll see. Close Media center so that it restarts next time it opens on the main screen. Reset the secondary back to portrait. VOILA! See you soon. (Please read this as a courtesy and not as applause.)

• HP Scan and print doctor & HP printer Install Wizard freezes

  My HP Officejet Pro 8500 A A910a model works for a year, but recently stopped wireless printing. I am considering a software problem, probably the drivers, because I could spend and print correctly the diagnosis of HP utility hardware test page. I downloaded the latest printing HP and Scan doctor and assistant installation HP, which freezes while searching for my printer. My printer is connected wireless. IM using desktop Dell XPS running Windows 7 Home Premium 64-bit. I'd appreciate it really all tips from you.

  Hello. Sorry for the late reply. It seeemed that I did work again by removing the device from my control panel, uninstall the HP program and restart my computerI then add the printer on the Control Panel, let windows search for the driver (he found only after windows update), and then install the driver. I printerd test page successfully. I still want to thank you for reading my investigation.