Does not install the software, 10.7

Similar Questions

• Complited download but it does not install the software

  

  Download complete but do not install the software.

  Hi juan,

  Double-click the downloaded file to start the installation.

  By default, your product trial installer should start automatically when the download process and extraction is complete. If installation does not start automatically, navigate to the folder where you saved the downloaded trial software and launch the installer. (See where are my downloaded products?)

  Kind regards

  Rave

• Windows XP does not install the automatic updates.

  Original title: kopieerfout

  After several years, my laptop with Windows XP does not install the automatic updates, giving only a mistake:

  "

  ER is een doing opgetreden bij het van het bestand ntoskrnl.exe copying

  Kan het bestand niet naar doelmap copying.

  Everything works OK.

  Thanks for your help

  Everything works OK.

  It seems that it is not... Why Dutch? You use or have the corresponding language version installed?

  Free translation of message:

  "An error occurred during the copy of the file ntoskrnl.exe
  Cannot copy file to destination... »

  Please note that ntoskrnl.exe is a process in the cycle of the initial startup on your computer program.

  Try to load your "last known good configuration".

  The issue is also known to be caused by a short circuit in the ground cable into the keyboard cable. Make sure that it is not the cause of your error by replacing the keyboard with another keyboard or just disconnect the keyboard from the computer. You can also look at your function "Add or remove programs" If KB2686509 <> http://support.microsoft.com/kb/2686509 > is installed.  Install manually if it is not.

  If the above doesn't help, try using the Sfc.exe tool - see here > http://support.microsoft.com/kb/310747

  Or run the Chkdsk tool - see here > http://support.microsoft.com/kb/315265

  If still no luck, you may need to restore the file ntoskrnl. exe as follows:

  1 - insert the Microsoft Windows XP CD. Note: If you have a recovery CD or a restore CD and not a Microsoft Windows XP CD is probably the procedure below does not solve your problem.

  2 - restart the computer and that the computer starts, you should see a message press any key to boot from the CD. When you see this message press any key.

  3. - in the Microsoft Windows XP setup menu, press the R key to enter the recovery console.

  4 - Select the operating system you want to set and enter the administrator password.

  5 - type expand d:\i386\ntoskrnl.ex_ c:\windows\system32

  6. - you will be asked if you want to overwrite the file, type Y and press enter to replace the file.

  7 - type exit to restart the computer.

  Hope this helps - good luck!

• Satellite P50-B-103 - Cyberlink Powerdvd does not install the update from Toshiba

  So I have an update for my toshiba Satellite P50B-103 for "cyberlink powerdvd" and it does not install, just to unpack and does nothing.

  I left the laptop to operate for about an hour to see if anything installed but it does not, what to do?

  Are you talking about the video player updated v 6.1.2.1 - A available on the Toshiba UE driver page?

  It is an update and requires the Player preinstalled (full version).

  After downloading, you will need to unzip the package (vidpl-20140813100353)
  Then, in the vidpl-20140813100353 package, you will find the TC30704300A.exe file.
  It is also a zipped folder. Right click on TC30704300A.exe and extract the files.
  After that, you will get the TC30704300A containing various additional files where you can start the update process.

• can not install the software for all in one photosmart 2610xi of disc of windows 7 pc

  I can't install the software for all in one photosmart 2610xi of disc of windows 7 pc.  Goes so far then stops and says cannot use the command "run as".  I am the administrator and logged as such.  I would like to use the software provided with to send faxes and others.  I can use the printer since the buttons on the printer and it prints from all programs... I just wanted to use this software.  Any suggestions?

  Thank you

  Hello

  The installation disk supplied with the printer is not compatible with Windows 7, as the device was manufactured prior to release of Windows 7.
  No matter which compatible OS are registered on the CD...

  A newer version of the software for Windows 7 can be downloaded from the HP site.

  Before installing the software, be sure to follow the steps below:

  1. Enter the control panel > devices and printers.
  2. Right-click on the icon Photosmart 2610 and lick to withdraw an instrument.
  3. Disconnect the USB cable between the printer and restart your PC.
  4. Follow the below installation, do not connect USB until prompted to do so during the installation of the software:
     http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=MP-76831-1&cc=us&DLC=en&LC=en&OS=4062&product=421134&sw_lang=

  Kind regards

  Shlomi

• Can not install the software for my HP Photosmart Plus B209 on Windows 8.1

  I could not install the driver/software package downloaded for my HP Photosmart Plus B209 Printer on my new HP laptop w/Windows 8.1. I get an error message that the following file is missing; \AppData\Local\Temp\7zS4D84\Setup\hpzshlaut4.0... I have 3 other computers of the OS windows 7 that I had no problem with the printer using this same download driver/software package. Any help you could offer would be greatly appreciated.

  Hello
  Follow the steps below and check if it solves the problem:

  1 open the Mcafee Virus and Spyware Protection software you are interested in, click on calendar and perform analyses. Click analysis in real time, and then click stop. Select until I restart the PC and confirm by clicking the button turn off.

  Now, try to reinstall the HP software and check if the installation goes as planned.

  If the problem persists, continue following the steps below:

  2. open the dialog box run by clicking on the Windows key and the R key on your keyboard. Type %windir%, and then click OK.
  3. type hpoins*.dat in the search bar at top, if there is that no result rename the extention in old instead of dat. (e.g. hpoins1.old)
  4. type hpwins*.dat in the search bar at top, if there is that no result rename the extention in old instead of dat. (e.g. hpwins1.old)
  5. start the Run dialog box by clicking the Windows key and the R key on your keyboard. Type MSIEXEC /Unregister. in the Run dialog box and click OK.
  6. launch the Run dialog box by clicking the Windows key and the R key on your keyboard. Type MSIEXEC/REGSERVER in the Run dialog box and click OK.
  7. run the installation file and check all difference.

  Kind regards
  Shlomi

• Can not install the software as another installation is already install

  When I try to install new software, my computer says that it is already install something, but I'm not.  How can I find what the computer is installed so that I can cancel it and install the software, I need?

  Hello

  1. what software are you trying to install?

  I would say you can do clean start and then install the software.

  How to troubleshoot a problem by performing a clean boot in Windows Vista

  http://support.Microsoft.com/kb/929135

  Note: After a repair, be sure to set the computer to start as usual as mentioned in step 7 in the above article.

  I suggest you follow the steps indicated by twinklingsky as dated April 20, 2010 from the link below.

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-windows_programs/another-installation-is-already-in-progress-error/3e84cba0-a4cb-4307-9a67-b506ebb105b3

• do not install the software for PSC 2355 using windows 7

  Recently upgraded my system from windows XP to windows 7. The CD with the software indicates compatibility with Windows 98, Me, 2000 & XP. I tried to use it to install the software but received a message saying that it was not compatible.  Need help, is there a way to bypass the message version and install or adownload available for me to use the HP University?

  Hello Milliebee,

  Welcome to the Forums of HP Support! I see that you have recently upgraded your computer from Windows XP to Windows 7 and you want compatible software and download drivers for your HP PSC 2355 with the HP Director program.

  Now, because you're using a newer operating system with an old printer you install software and drivers by using the OS print driver, which means that there is no download available, but the driver was built into the operating system.

  To better understand, please have a look here: installation of the printer software in Windows 7 for a USB cable connection, regarding the HP Director, it is no longer available. You may be able to get some third party options that can be comparable.

  I hope this helps!

  Thank you

• Comments Windows 7 does not install the network driver?

  Hello.

  I downloaded latest Win7 RC and installed on a virtual machine in VMware workstation. It not installed the virtual NIC driver so I have no internet!

  I googled the problem and it turns out that some people have reported this problem, and it came with a solution which in turn off the virtual machine, remove the network adapter, turn on the virtual machine, turn off again, to add a new and finally turn on the virtual machine - as described in this forum:

  http://social.technet.microsoft.com/Forums/en-US/w7itproinstall/thread/b5843189-d519-4e8a-a4f8-f1e671b341b6.

  I did and I've also updated vmware workstation (I have version 6.5.2 build 156735) and updated tools vmware on windows 7 and nothing worked. I have an another vm with XP and everything goes smoothly with networking and fully operational internet.  I used the win7 help and he pointed out this particular problem: there is no device installed network driver? Any suggestions?

  Each virtual machine can be started by double-clicking its vmx file.

  It is a plain text file. You can open it in every good text editor. Do not use scamblers text such as WORD and nonsense.

  You can compare the vmx file with the list of material that you give to the man behind the counter to your computer-friendly dealer store.

  You can add line at the end of this file - make sure you just you have twice the same line

  ___________________________________

  Description of the vmx settings: http://sanbarrow.com/vmx.html

  VMware-liveCD: http://sanbarrow.com/moa.html

• Does not install the audio driver for Portege M400 WinXP

  Hi all

  I have a Portege M400 (3G) and I managed to extract the Windows XP Tablet Edidtion the recovery DVDs. I installed Windows XP and all the drivers in the correct order (I've omitted some of the software I don't need) and everyting works fine (in fact, I am posting this from the tablet itself) except for the sound driver. He refused to istall and gives an error message that the software does not apply to this model; even if it is the only available page driver drivers Portege M400(3G).

  any ideas?

  Hello

  where to download the driver? On the European site? Maybe you should try the Canadian site, they sometimes have some drivers who hasn´t europe and maybe you can find the audio driver that matches:

  http://EU.computers.Toshiba-Europe.com/cgi-bin/ToshibaCSG/download_drivers_bios.jsp

  Otherwise, there is another option: find out which audio chipset is installed, visit the website of manufacturers of this chipset and download the drivers. Him to work.

  Welcome them

• OfficeJet 6500 icon does not have the software to start

  I have windows 7 on a hard drive and windows 8 on the other disk.

  I downloaded the latest software and driver for printer Officejet 6500 E710n-z.

  I installed 3 times and each time everything installs successfully but when I click on incontinence on my destop, the software does not work.

  Yet, I can print to the printer and its in my printer folder.  I can scan with the scan icon, but the main icon that starts the program does not work on windows 7 or windows 8.

  The main icon gives all the choices I want to do with the printer.

  The same link has steps to perform the patch manually as well

  I work for HP!

• HP Photosmart C4780 &amp; Windows 8 - impressions but do not install the software

  I have a laptop Compaq CQ58 with scannor/printer/copier HP Photosmart C4780 attached via the USB port.

  The printer will print but:

  In devices and printers, when the printer is highlighted, I'm told 'Status = needs troubleshooting' and 'the driver is unavailable.  It has a yellow warning triangle, signifying that it is in error.

  Scannor scan, but only to an SD card, when it is connected, can be detected by the laptop.

  The copier works, but I guess that's because the copy function is entirely internal.

  The printer has been installed using:

  -the CD - it does not work!

  -l'option 'Add new printer' devices and printers, I searched the web for readers and that's how I managed to get the printer work «»

  Then... the questions I have are:

  1. How can I install the printer correctly when 'normal' routes do not seem to work.

  2. How can I get the software on the laptop scannor?

  I must also add that I have downloaded the following software on the HP site:

  PS_AIO_06_C4700_140_408

  HPPSdr

  These do not work!  When I click to run these I get "User Account Control" screen where asked me to confirm that I want to launch the application.  When you select 'Yes', the cursor shows 'the blue twirly thing' indicating that it is something... I wait, but nothing happens.

  In the end, I would like to print wireless, but it's secondary to install all the features of the printer.

  I would be grateful for any help.

  Thank you

  Neil.

  The Compaq CQ58 laptop came pre-installed with windows 8, the printer was not installed when I run the installation.  I think the problem is that the installation did NOT work properly on my laptop.  I get the user account control screen but when I click on 'run' nothing happens.

  HOWEVER, when showing my wife what happened when running the facility started in life and the printer is properly.

  Thank you for your time and effort in loking into that but I think I'm OK now.  If I bought a car that has done this it would be directly to the manufacturer... but this seems to be the norm with Microsoft and Windows 8.

• Firefox does not install the Adobe Flash plugin

  Videos flash and flash Web sites no longer work in my Firefox browser. After you install the plugin and restarting the browser flash still does not work or even appear in the list of installed plugins. As far as I can tell that this is not a problem with Adobe Flash that I can still use it with Google Chrome.

  FYI - IE, Firefox and Chrome use different versions of the player in order to work in 1 browser Flash means nothing to the others.

  I would download the installer, close Firefox, uninstall Flash (from programs and features), restart the computer and try the installation program.

• OfficeJet Pro 8610: Officejet Pro 8610 wireless printer is constantly busy and does not update the software drivers.

  I'm trying to update my printer via the steps outlined on the HP website. However, when identify my printer and try to install the revised version of the software of my printer continually says its busy. This means that the printer will not update.

  When I first tried this software update the status of the printer was ready however after failing at the start of this first attempt each following update failed because the printer is busy. I turned he walks several times and even turned off then the option automatic updates with no luck.

  Without being able to change that status, I can't update the printer. I know that it is able to connect to the network, because it checks and tells me that he has the latest software version available fo, so I am very confused as to how I can fix this.

  Any suggestions?

  Hey @Branthwaite, welcome to the Forums of HP! I'd love to help you update your JO 8610.

  From your description, I understand that you cannot refresh the printer as it is stuck in the free/busy information.

  We will perform a hard reset. To do this, leave the printer and unplug the power cable for 1 minute. While it is unplugged, press and hold the power button on the printer for 10-15 seconds to release built his power, then after the minute, plug the printer in. Also, even if you have used a surge protector/power bar this whole time and you feel this isn't the cause, please plug it in to a wall outlet so that we can eliminate the source of energy as the primary cause.   Questions when it is connected to an uninterruptible power supply/Strip/surge protector power

  * In this document, you will see, QUESTION: questions or problems may occur when a printer HP LaserJet series printer is connected to a UPS (UPS), a power strip or a surge protector that is not limited to the Laserjet printers.

  I can't wait to hear back on your part. If performing a hard reset, or move the printer to a socket solves the problem, please click Accept as Solution button below so that the community can see your problem is solved. If the problem persists, please don't forget to leave me and I'll do everything I can to help.

• Automatic update does not install the update of security for Windows XP (KB2419632)

  KB2419632 will not install on my computer.  I tried to install it several times without success.  I get a 'General failure to install' error without characteristics.

  I downloaded the update (WindowsXP-KB2419632 - x 86 - ENU.exe) and tried to install it manually, but it fails when he tries to save the file "" MSADO15. "." DLL"in the folder"C:\Program Files\Common Files\System\ADO".

  The dialog box that opens is "Copy error" and said "Setup cannot copy the file msado15.dll.  Ensure that the location specified below is correct, or change it and insert 'Windows XP Sytem Files' in the drive you specify. »

  The file MSADO15. DLL exists in the directory above.

  In reviewing other positions, he requested information on the following security software:
  1 security Suite: McAfee Total Protection 2010 (current subscription)
  2. what McAfee, Norton never
  3. preliminary: do not remember, have always used McAfee.

  NOTE: I've never had a problem with an update of Windows until one.

  How should I proceed?

  See the section "How to get help" of http://support.microsoft.com/kb/2419632

  Visit the Microsoft Solution Center and antivirus security for resources and tools to keep your PC safe and healthy. If you have problems with the installation of the update itself, visit the Microsoft Update Support for resources and tools to keep your PC updated with the latest updates.