Does not recognize Sansa Fuze 8 GB SanDisk 4 GB or 8 GB of MicroSD cards

Similar Questions

• Computer does not recognize sansa fuze

  I have my fuse sansa for over a year and no problems, but now I'm trying to plug it in (to add songs), but it shuts down and the computer does not recognize it. I formatted, but still once, nothing happened.

  What is going on?

  I am sure that is not the computer because it recognizes the other gadgets and souvenirs, memories, external drives, etc.

  Help, please! I'need to still have a few records in my rocket!

  Thank you.

  Have you tried another cable?

• computer does not recognize sansa e260v2 when I plug

  Someone out there... Help, please!

  Have tired the suggestions contained in this message?

• the Bank does not recognize your computer

  Approximately a week before, when I log into my bank account, the background would be dim and a window shows indicating that (the Bank) does not recognize my computer and to please fill in the following information such as card number, ATM number, etc..  Of course, I didn't fall for it, but the same problem exists for other accounts such as Amazon, my gas utility account, my credit card accounts, etc...  What kind of virus is it called? And how to remove it, isolate it or quarantine it?

  Thank you

  I95Jim

  PML... It's a tactic that I didn't think to try... again.  Just before, I had a discussion with an expert/technician(at www.supportservices.microsoft.com/support/expert/Waldo).. .He took a while, but he eventually removed the spyware that was causing me grief (TDSSKiller, Norton I think) and he did a few other things... then I tested a variety of accounts several times successfully, the virus disappeared.  But, thank you for your suggestion and keep that account as a possible solution for similar incidents in the future.  Yes, there is a FUTURE...!

  Thank you

  I95Jim

• Computer does not recognize my Sansa e260

  I run Windows 7 Home Premium. My MP3 player is a Sandisk Sansa e260.

  Normally, to charge the Sansa, I've just plug it into a USB port on the computer. It is immediately recognized and loading begins.

  Today, while I was out walking the dog, the Sansa ran out of juice. So when I got home I plugged the computer in the usual way. The computer does not know that it existed. It didn't start to load, it does not appear as a drive in Windows Explorer.

  I rebooted the computer with the trendy Sansa. No improvement. I ran "Find the hardware changes" on the USB entry in Device Manager. No change.

  I tried the Sansa in computer from Vista to my wife (who also accused there from time to time). Same result - the computer does not recognize the Sansa.

  Any ideas, please?

  Try performing a reset before you plug it into your computer to charge. There may be just enough juice left for this. You can usually squeeze a few more drops of a flat (any type) battery by heating slightly he. Maybe put it in your Pocket next to your body under a sweater for a while, or take it to bed with you. Your body heat to warm up gently.

  Now that old hat so to speak, press and hold the market/menu button while you count to 20. You can do it silently so the people around you do not think you have freaked out. OK, now, release the button and after a few seconds, press again to see if it boots up on its own. If so, place the cable of life support (Sansa) to quick before he dies again.

• My sansa e280 v2 does not recognize my 4 GB sdhc card

  My sansa e280 v2 does not recognize my card sdhc and i ' v ever read other posts, but it does not work. i ' v used in msc mode, but the music does not appear. It happens on the computer, but of course I need extra space.

  some posts say always use rockbox anyway, but I do not understand what to do.

  Help, please!

  RB firmware does not replace the, but rather sits next to him. You can start either at will. The Rocbox utility should install everything for you.

• HP laptop running windows vista family premium does not recognize my HTC Fuze smartphone when I connect it wil a usb connection.

  HP laptop running windows vista family premium does not recognize my HTC Fuze smartphone when I connect it wil a usb connection. I don't quite know what I changed. It allows to work so that I could sync to pc for outlook, etc. Also when I go to the link on the computer to display the drives and devices it does not show the connection. I use window mobile device centery. It says not connected. Thanks for your help.

  When I connect the HTC Fuze phone to the computer, it comes up with a window of synchronization and the phone starts to load.

  Sync Center says not connected and nothing is happening on the computer.

  When I bring mobile glass Center thing it doesn't say not connected to the smartphone.

  I don't see the phone of the link computer to which is connected to the hp laptop.

  the USB port works with my printer.

  What should I try next?   Thanks for your help.

  Hi Bill,

  You can try the following steps and check:

  Method 1:

  Connect the HTC Fuze to the computer, and then run the fixit and see if that makes a difference.

  Automatically, he diagnoses and fixes problems with the hardware. (USB) Keyboard and mouse are not detected by the Manager of devices or when they do not work.

  Method 2:

  If method 1 may not then try the following:

  If you are running Windows Vista 32 - bit, then Uninstall and reinstall the same.

  Microsoft Windows Mobile Device Center 6.1 for Windows Vista (32-bit)

  http://www.Microsoft.com/en-in/Download/details.aspx?ID=14

  If the problem persists, please contact HTC.

  Please post with the State of the question.

• I got Windows 7 and when I plug it does not recognize a sandisk to my pc USB flash drive

  I got Windows 7 and when I plug it it does not recognize a drive flash USB San-disk on my PC, all the other brands are. Can someone help me?.

  Hi Martin,.

  Thanks for posting your question in the Microsoft Community forums.

  I see from the description of the problem, that a USB SanDisk flash drive is not detected on the computer.

  I imagine the inconvenience that you are experiencing. We are here to help and guide you in the right direction.

  To resolve the problem with the connection of a USB flash drive, I need more information:

  1 have you tried plugging the machine into the other USB Ports?
  2. did you of recent changes on the computer before this problem?

  Method 1:
  I suggest you to connect the USB device to another computer and check if it gets detected. If this is not the case, this could be a problem with the USB device.

  Method 2:
  If the USB device is detected on another computer, you can run the hardware and devices Troubleshooter and check if it helps.

  Hardware devices do not work or are not detected in Windows
  http://support.Microsoft.com/mats/hardware_device_problems/en-us

  Method 3:
  I suggest you try the procedure described in the article and see if it helps.

  Install a USB device
  http://Windows.Microsoft.com/en-us/Windows7/install-a-USB-device

  Check the link for more information.

  Install, view, and manage your devices and printers
  http://Windows.Microsoft.com/en-us/Windows7/install-view-and-manage-your-devices-and-printers

  Let us know the status of the issue after you perform the troubleshooting steps. If you need additional help or information on Windows, I'll be happy to help you. We, at tender Microsoft to excellence.

• WMP does not recognize the 3 different portable devices

  I have a new PC Win 7 with WMP. My PC DID recognize 3 different portable devices, when I connect (an iphone a plane mp3 iriver and Sandisk fuze mp3 player.) But WMP does not recognize everything, even if the PC is. I've tried different USB ports on the PC, makes no difference, other than that, all works fine USB ports. And I didn't look at using WMP, which does not seem to realize that this problem can exist, no info at all.

  How to make WMP to recognize so I can sync? And BTW, I'd like to go back to WMP in Vista, I'm bored of advanced tag editor.

  Thank you.

  When you write that the PC recognizes your devices, you got the popup that says that each device has its driver installed and it was ready for use or that you just want to say that you get another indication that the device is connected?

  What WMP version you have (click Help > about Windows Media Player; if you do not see the menu file/View/Play/tools/help, right-click at the top of WMP)?

  In general:

  • The iPhone requires iTunes to synchronize.
  • The mp3 player iRiver must have its firmware updated, which is perhaps not so easy to do (see the device in Device Manager or my computer?) --> http://answers.microsoft.com/en-us/windows/forum/windows_7-hardware/iriver-ifp890-mp3-cannot-find-driver/c28c30e1-3c9b-4446-b50a-cd884b3cd73e
  • The Sansa Fuze + player MP3 (if that's what you have) requires Windows Media Player 10 or newer.  See also http://kb.sandisk.com/app/answers/detail/a_id/42/session/L3NpZC8qc2g3eHFQag%3D%3D/sno/0 it is apparently quite sensitive to USB cables other than that which was supplied with the product.

• TS15g067cl laptop: memory card reader does not recognize the card

  The card reader does not recognize the cards.  It does not have a drive location (example: f drive).   This makes it impossible to veiw the files or photos on any (I tried six different) of my SanDisk SD cards.  I can't find anywhere to downlod corrected card rhe read updates update drivers or BIOS for my system.   I just bought this computer 1 week ago and do not understand why I read in the forums about driver issues of card reader for the last year.  Windows 8.1 has been out for some time.  Why HP would sell these computers without updating the software to make them work as they should?

  Thanks for the info.  Disk management does not show the drive.  The problem was resolved after reloading BIOS, as suggested in another post.

• Statellite M100 does not recognize USB storage devices or SD card

  I had problems with my laptop Toshiba Satellite M100 series read don't not Sandisk SD card in the camera to my son - is a 2 GB card and what I read online, maybe that is the problem BUT the laptop is also not reading any of my devices USB "stick". When I insert the SD card or a USB 'stick' he asks me to install the driver software that is simply stupid. I tried to connect the camera via a usb cable too and it does not recognize the device and still once, claims the driver software device.

  I looked on the toshiba site and have installed all updates that I thought may be justified, I'm also trying to run Windows update (at least every 2nd week anyway so it shouldn't be a problem). I am running Vista Home Edition (32 bit). The USB ports have certainly worked in the past, I don't really want to resort to execution of recovery discs if I have as I don't want to lose all the stuff I've stored.

  Question of the SD Card/USB seems to be a common one, but I can't find a specific patch to this topic or any other tech site, any suggestions?

  See you soon

  In your case, I would do two things.

  First: Check if a new BIOS is available. Search on the Toshiba site and do an update.

  Second: Reinstall the laptop with the recovery discs. I know that you will lose all the data, but you can save it to s DVD or external HARD drive.

• W510 does not recognize HC memory cards?

  I put a Sandisk 4 gb micro SDHC into my w510, but he does not recognize the card. According to the documentation, it can support up to an 8 GB card. I can put a non - HC card and the phone think it is no problem. I tested the HC card in my computer, and it works without any problem. If the w510 can take up to an 8 GB card, it should be able to use the HC cards, shouldn't it? As I understand it, most microSD-HC is only 2 GB. Anyone else had a problem with SDHC cards in their phones?

  WarCat-

  I received the confirmation of the product team. There was a typing error in the user manual. The phone supports up to 2 GB cards. Sorry for the inconvenience. We will work to get this fixed in future textbooks W510.

  Mark

  Support Forums Manager

• MacBook does not recognize the SSD.

  Hello

  I would like to replace my HDD on my MacBookPro (13 "/ Mid 2010/ElCapitan") with an SSD. I bought a SanDisk card Ultra II 480 GB SSD and SATA to USB cable (this:http://www.ebay.co.uk/itm/251800670431?_trksid=p2057872.m2749.l2649&ssPageName=S % 3AMEBIDX % 3AIT TRK).

  I wanted to connect the SSD drive, format, make a copy of my HDD with SuperDuper! and change the part. But seems that my MBP does not recognize the SSD! I can't see it in disk utility, or in the office.

  What I am doing wrong?

  Thanks in advance.

  How have you plugged the SSD drive?  It is installed internally or externally via USB?

  Ciao.

• My laptop does not recognize new Sandiscs - what am I missing

  I recently bought 3 new Sandisk SD Ultra 16GB 10 speed but the card reader in my computer hp laptop Windows XP, does not recognize them.

  They work fine in my camera.
  The original disks are 2 GB and they work fine in the camera and the computer.
  What Miss me?

  You don't mention what service pack you have, but if you have sp 3, the most likely reason is that the card reader in your laptop is too old to read new (> 2 GB) SDHC cards.  Connected by USB readers are fairly inexpensive, just be sure that the one you get includes the ability to read SDHC cards

  For example: http://www.amazon.com/s/ref=nb_sb_ss_i_4_5?url=search-alias%3Daps&field-keywords=sdhc+card+reader&sprefix=sdhc+%2Caps%2C213

• Recovery Manager HP does not recognize my flash drive!

  My computer is HP Pavilion p6 desktop computer - 2317c, running windows 8.

  I am trying to create a recovery media and have a 32 facet of Cruzer Sandisk of Go that I intended to use for this. Unfortunately, Recovery manager does not recognize the flash drive... it never appears in the menu at all. The drive appears when I click on the computer icon in the section files, with no problems at all, as you can see.

  

  I have not created a game of recovery media, and it shows not enough space error, he just lets it appear at all!

  What can I do to fix this? I really want to do a recovery set, to prepare for a visit to the demon responsible for foulups visit.

  Hi Savvy2,

  SanDisk has changed the firmware in their most recent products so that the USB appears as a local drive and not as a removal media device. Keys older HP Recovery Manager on this information, and that's why the HP Recovery Manager is not recognized your USB key.  Review of the information that has been compiled by Erico below.

  Success

  Transcend 16 GB 3.0 USB

  Team F108 64 G Group (reported as a success by Big_Dave)

  PNY Turbo 3.0 - 32 GB

  Lexar Jumpdrive M10 sure 64GB USB 3.0

  Patriot anger 3.0 32 GB

  Failure

  Kingston DataTraveler 100 32 GB G3

  Kingston DT R3.0 USB 3.0 32 GB

  The Pro ADATA s102 - 32GB USB 3.0

  SanDisk Extreme 32 GB 3.0
  SanDisk Cruzer Blade USB 2.0 Flash Drive 32GB