Security on Photosmart 3210xi AIO

Similar Questions

• Photosmart D110 AIO will print, won't copy or scan

  Photosmart D110 AIO will print but won't copy or scan. The printer screen bounces to 'Copy' without copying. Same problem as stand alone or connected to the computer. Help!

  Try to unplug and plug back in.

  If this does not work, you may have a hardware problem.

  This snack, try this.

  {Insider reset deleted information}

• Photosmart 3210xi top will not close

  I have a HP Photosmart 3210xi that top will not close. It was opned the same as you would to change ink carterage

  I wish I had an easy answer for you. These hinges are difficult to reach. You could give a few quick shakes up or carefully lift the unit a few inches upward and drop the table to try to unlock the hinges. Put something to protect the scanner glass where the top down.

  I don't think that the cold would damage unless it was very cold, is it possible, that the plastic can get rigid.

• Photosmart 3210xi Printer-cannot install the new computer Win7

  Hello

  I just got a new computer which has Windows 7 as operating system, previously using Win XP.  I have the original installation disc, but when I try to install my HP Photosmart 3210xi printer, it tells me that it is incompatible with my operating system.  How do I overcome this?  BTW, I can just plug in the printer and it will work, but of course I want to install it so I can use the scanner program and others.  I am not a novice, but I'm not a computer programmer that so keep that in mind!

  Debbie

  Hello

  Download and run the installer printer HP rom www.hp.com/go/tools

  Kind regards
  Jabzi

  Give Kudos to say 'Thank you' by clicking on the White Star under my name.

  Click on 'accept as Solution' if it has solved your problem, while others may find it.
  I work for HP

• New MacBook Pro does not print 2 sides on Photosmart 3210xi

  Signed ol ' HP for the new MacBook Pro with OS X 10.6.6 USB cable, and he finds the HP.  Then toured to update software to currently do.  One of the printer boxes display correctly the HP to be equipped with the print side 2 on the back module and checked, but it is not printing 2 sides.  This system has no solid range of choice than Win7 - what is with that?  Someone at - it a method to obtain this HP Print on both sides of the paper?

  Thank you

  Bill

  Hello HP,.

  I found the real solution, thanks to a bad hard drive on a new MacBook Pro, who died just before the spirits high at their altar in the Apple store here.  He was just 12 days old.  They gave me another new MacBook Pro.  While the implementation here at home and to have met with the Photosmart 3210xi he seemed to do ok, but again, it wouldn't make impression on side 2. And not after the MacBook made the update either.  So I tried the manual visit to HP - no help.  Unplug the printer and uninstalled the printed stuff.  Stop. Started and went to HP and downloaded the driver 10.3 me connected and turned on the printer when the installer wanted.  Printer worked and printed 2 sides.  The MacDonalds its software update and thinking, I saw something strange about one of the dialog boxes, all when trying to print after the update: 10.2 Driver. What?!  And no 2-sided, once again.  Fact the entire removal and install Driver 10.3 on but without having the MacBook again the software update. Now it prints 2-sided.  

  I'll tell Apple about it.

  In the meantime, it will help if HP would update what list you provide to Apple for their updates, which would help. Thank you!

• Photosmart 3210xi: need Drivers photosmart 3210xi

  Help, I need the drivers for my 3210xi photosmart all-in-one printer of 8.1 64-bit windows operating system. I intend to switch to windows 10 soon so I will need these drivers as well. Can someone advise me on how to get them.  Thank you in advance. I like the printer and still have a lot of ink. So this would really help me.

  Hello

  Download and install the drivers following, it is designed for both windows 8.1 and Windows 10:

  http://ftp.HP.com/pub/softlib/software13/COL30951/MP-110165-3/AIO_CDB_Net_Full_Win_WW_140_408-5.exe

  Once installed on Windows 10 in the future, once reached the stage of the SOUTH click the 4th link to customize software selection, don't forget to uncheck the option Bing bar which is in conflict with Microsoft Edge.

  Shlomi

• IV ' e lost my "Scan to computer" my printer HP Photosmart B109a AiO

  I can not scan to the computer from my HP photosmart B109a printer AiO I got

  Hi caterpillarand thanks for getting back to me!

  I appreciate the info!

  I recommend you to perform a power reset the printer.  Unplug the power cord from the printer and the power outlet, then wait 60 seconds. After 60 seconds, plug back in the printer. Make sure that you connect the printer directly to a wall outlet. Make sure to bypass any surge protector or power bar.

  I suggest also download and run the HP print and Scan doctor.

  Please hold me!

• Security Wireless Photosmart Plus B209a

  Does the Photosmart B209a more to connect to a secured using WPA2 AES personal wireless network

  Yes, the B209A can connect to the secure WPA2-PSK AES network.

  All inkjet HP wireless printers are Certified Wi - Fi.  To obtain certification, our printers must pass a series of interoperability tests that includes control of functioning of the WPA/WPA2 with TKIP/AES encryption against a representative group of wireless routers and access points.

  If your wireless router or access point is certified Wi - Fi, our printer will work with it.

  BTW - what kind of wireless router do you have?

• Wireless using Photosmart 7280 AIO and Photosmart 3210 AIO USB - installation problem

  I use Windows XP sp2. The 7280 is new, so I was told HP support completely uninstall all my computer HP software, then install more software 7280, then use the menu option 'Add device' on the installation software of 7280 again to install the 3210. I have installed suceesfully 7280 software and am able to access the 7280 on my wireless LAN. However, when I use the installation of 'Add device' in the installation software, I get the dialog box 'Connect Your Device Now' (following the instructions for the installation of the USB) and when I connect the USB to my 3210 to the computer, I get the Windows Wizard 'addition of material", which is unable to locate the drivers for the 3210. The button 'Next' in the 'Connect Your Device Now' dialog box is not enabled, so I can't continue. It seems strange to me that Windows identifies the device but the HP software does not see. The 3210 is not in my list of printers in Windows.

  Even more strangely, yesterday I ran the base driver and utility download for the 3210 off the coast of the HP site after installing the 7280 software (probably shouldn't have done) and everything worked, I was able to print on both devices, however this morning when I turned on the computer I got a HP dialog box telling me that the installation failed and it can uninstall some software including all drivers 3210.

  Any suggestions? What I have to spend 2 + hours to uninstall and reinstall from the beginning again?

  Well, I think that I solved, at least as well as is possible. I just uninstalled, installed all the 3210 drivers downloaded from HP, then install the software suite full 7280. Both printers are available and print jobs, but the HP Solution Center software only allows me to access the AIO 7280, so I guess I won't be able to scan from my 3210 on my computer - I have to use the 7280 for this. I didn't install the software suite full of the 3210 - maybe that would give me two centers solutions HP (two different versions), one for the 3210 and one for the 7280...

  Incidentally, I don't have the CD 3210 - I think I have lost - so I'm dependent on the HP download page.

• Photosmart C7250 AIO: Fax number in the fax header change

  How can I CHANGE the fax number in the header of the HP Photosmart C7250? When I go to settings and select Fax header Configuration, I get the screen to enter the text for my name, and then click OK and the fax number is displayed, but there is no way to change this. How can I change?

  Hello

  When you access the Fax header, definition FRO the printer screen, confirming the header once the fax number is displayed as described.

  Move the cursor using the arrow to the left until the first character is marked, enter the current number and replaces the listed value and press OK to confirm.

  Kind regards

  Shlomi

• Photosmart C7280 AIO: Installation of an earlier version of the AIO software to solve the problems of scanning?

  I had nothing but troubles attempt at analysis of the Solution Center with my Windows 7 upgraded to professional to Home Premium.  I've seen a lot of posts on sysems that will print but not scan.  None of the solutions proposed on these threads has worked for me. I ran print and Scan of the doctor.  I've uninstalled and reinstalled the latest version (PS_AIO_02_Net_Full_Win_WW_130_140).  I run L4 uninstall and reinstalled the latest version.  I scanned my computer against viruses and malware.  I ran "SCF/scannow".  I have run memory scans.  I did "unplug everything" and reset.  I ran the product as an administrator.  I tried to run several compatibility modes.  This past for more than a week, and I was not inactive.  You name it I did it.  I don't want to turn on my computer to its configuration 2 years up to what I've exhausted all other possibilities.

  Now for the real question (for those who have had this or similar questions)... Has anyone everything uninstalled and tried to install an older version (which can be improved later)?  My old version on my OLD XP laptop works fine.  I still have the older 100_228_PS_AIO_02_Full_Net_enu_NB verson of the installer.  If it will install (and work) on the WIN7PRO, I'd be happy.  Darn, I just try that anyway, but I would feel more comfortable if I knew that someone had tried (win or lose).

  All suggestions are solicited.

  I have no recourse to the use of the old S/w.  I kept search some old discussions in this forum and finally a couple linked together which resulted in success (after several attempts at all the great suggestions that I had read in the forum).  BUT. one stands out because it spoke of my exact problem. Scanning from HP with my Photosmart C7280 solutions Center after the upgrade to Windows 7 Edition Home Premium to Windows 7 Professional.  The solution has been presented in a thread of 2009:

  http://h30434.www3.HP.com/T5/printer-all-in-one-software-drivers/after-Windows-7-upgrade-printer-is-installed-but-nothing/m-p/174825#M8248

  I landed on this all to coincidentally linking 2010 regarding a similar issue but diferent (similar = upgrade, different = print):

  http://h30434.www3.HP.com/T5/printer-all-in-one-software-drivers/networked-C6280-and-Windows-7-64-bit/TD-p/217282

  I am so happy that the old wires still exist in this forum.  The solutions are not always the most obvious, especially for those of us who have been around computers for almost 40 years and have some predisposed notions.

  Thank you to everyone.  Now to save this thing before something else goes south.

• Photosmart 3210xi: xi Photosmart 3210 printer software to win 10

  Where can I get the all-in-one software compatible with Windows 10?  Print very well, I can't seem to get it tested.  Help, please.

  Hello

  Thank you for using the forum.

  Cannot find the software FULL of features for you on hp.com, so you must print using the-OS drivers.

  Have you tried the HP scanning and Capture of AiO remote control?

  HP AiO Remote apps

  Follow these steps to get the applications (if it is not already installed):

  1. Go to the Windows store
  2. Search for "HP AiO Remote" apps
  3. Install the apps.
  4. Apps should detect your wireless printer, depending on the applications, there is a function "Scan."
  5. Click the Scan and it will direct allows you to download apps "Scan and capture.
  6. After installation, you should be able to scan.

  Also for a sweep, can you try to open Paint and then try scanning from there?

  

  Hope that helps.

• HP PHOTOSMART 3210XI ALL IN ONE: printer says paper size or type is incorrect when you print an envelope from Word

  Hello

  I've had this printer for years & were able to print my envelopes in Word without problem. Today, I tried to print an envelope without result. The printer keeps giving me (type and paper size is incorrect). I have not won the printer & reinstalled. Still no change. Any ideas?

  Thank you

  Dear AIRASSAULT18B,

  Please follo the steps in this document:

  http://support.HP.com/us-en/product/HP-Photosmart-3200-all-in-one-printer-series/439599/model/439603/document/c01824353/

  I hope you find it useful.

  Greetings.

  * I am not an employee of HP, my work is voluntary.

  If this answer was helpful and clarify or solve your problem, please mark the topic as resolved and click on my next star to indicate a kudo, thank you.

• Bistre using Photosmart Premium AIO

  When I print on my HP C309 Photosmart Premium new all-in-one using iPhoto ' 09 running Mac OS 10.6.2 (Snow Leopard), the prints look as I applied sepia effect. In other words, my black and white photos have a light yellow background pink or clear. I even choose black and white effect in iPhoto, but the looks still print sepia.

  I tried printing the same picture on my HP6840 deskjet and the black color is perfect - no sepia aspect.

  Thank you.

  MichaelT

  HP inks and papers are a matched set.  Use of inks not HP or papers is, well, kind of a crap shoot.  This may work, it may not.

  I recommend the HP Premium Plus photo paper.

• Photosmart 2575 AIO - need to reset the password for the built-in web server

  People,

  I lost the password to the web server integrated on my HP Photosmart 2575 all-in-one.

  Can you please help me reset it?

  Thanks in advance and Bravo!

  Cristian.

  csantiago78 wrote:

  I lost the password to the web server integrated on my HP Photosmart 2575 all-in-one.

  Can you please help me reset it?

  This thread gives to think that a full reset can be done by disconnecting the power to the Photosmart 2575, then plug the power while pressing the keys 'Cancel' and 'OK '.