Domain and workgroup

Similar Questions

• What is a domain and a workgroup

  How to know what domain or workgroup, I should change for a domain and a workgroup

  Hi rickmerritt,

  Please see article with some information:

  http://Windows.Microsoft.com/en-us/Windows-Vista/what-is-the-difference-between-a-domain-and-a-workgroup

  I hope this helps!

• Domain vs. workgroup

  Hello
  We have oracle application R12.0.6 installed in 2 levels (apps & DB) on windows 2003 server. And these servers are not part of the domain, there saperate working group.
  
  So my question is: are there at - it a recommendation made by oracle to use the apps on the domain or workgroup? And if it was recommended to be on the field, how to turn this area?

  Habeeli wrote:
  In fact we will change (abc.com) workgroup on the field (abc.com) with the same IP address. So, this means that I just joined the domain and that's it?

  Fix. I suggest that you run AutoConfig then and make sure that it ends successfully.

  Thank you
  Hussein

• I am locked into a widows 2000 operating system after an inept tech tried it sever the domain and join it.

  Technician tried to delete the computer account on the domain and join it. It works well with Windows XP and win7. Now it comes to the administrator login and does not allow me to use the admin password.  I need to enter this computer because it is an old autocad computer with lots of files which are still on the machine.

  Hello silvrfox,

  The Microsoft Answers community focuses on issues and problems related to the consumer environment. Please join the public IT pro TechNet forums below:
  TechNet - Windows Server
   
  Thank you

• Old server will allow new domain and domain controller.

  We had old netwrok running a sbs2008 and 3 Server 2003 with domain name xyz.local(not actual), now we have a new server sbs 2008 with new domain name xyzit.loca and put some old sbs2008 at rest (off-grid). How can I join servers olde new domain and domain controller from NW

  Hello

  The business support, you can find forums on TechNet, see the following links:

  http://social.technet.Microsoft.com/forums/en/category/WindowsServer/

• user belongs to a domain and user does not belong to the local administrator or power users groups, or any custom group and the user is not part of the domain administrators group, but user show that it is admin

  WinXP
  user belongs to a domain and user does not belong to the local administrator or power users groups, or any custom group and the user is not part of the domain administrators group, but user show that it is admin

  I did a gpupdate/force and restart twice PC
  Yet, user indicate it is always admin when we right click on Start menu and see the possibility to open all users

  Hi elena_ad,

  Your question of Windows is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the public on the TechNet site. Please post your question in the below link:

  http://social.technet.Microsoft.com/forums/en/winserverManagement/threads

• Have set up my own domain and linked to my portfolio but I get an error message when I type the URL, y at - it somewhere I need to "publish" the site?

  Have set up my own domain and linked to my portfolio but I get an error message when I type the URL, y at - it somewhere I need to "publish" the site?

  To all those who have suffered from this problem of background, there is a "Publish" button down green...

• Related Office Clone join domain and gets then disjoint after reboot

  Hello

  I have an ad in which a DHCP server is configured.

  My image of parent is not connected to the domain. I created a customization script using the specification of customization Manager. The office linked clone uses this script to enter the field.

  Singularly, the linked clone office made an entry in the Active Directory computers and users, but when it restarts and displays the login screen, it gets WORKING group instead of domain.

  In the end, I get an error of customization in the Console Administrator display.

  A possible explanation for this? Am I missing something?

  I did release the ip address and empty the DNS before taking the snapshot.

  Thank you

  When you enable the composer on the Administrator page, you specify a user account that has permissions to domain indicated in the installation guide.   When you create a new pool, select quickprep as the method of customizing of comments that user account is used to join the domain and place the machine in which OU has been specified.

• How to create a default domain and deploy the app in jdeveloper using a script or code (not manually)

  Hello

  I installed Jdev using silent installation.

  Now I have some apps already created I want to create a default domain, and then to deploy apps in it through any script or ants?

  Can someone help me on this?

  Thank you and best regards,

  Vivek Pemawat

  Hi This worked for me I checked the log of the jdev, how he creates the domain and then using that I created the field

  I used the python script for deploying applications:

  Connect ('weblogic', 'welcome1 ','slc01fnw:7103 ')

  deploy (appName = ' Application13 ', path='/home/rasubra/jdeveloper/mywork/Application13/deploy/Application13_Project1_Application13.ear' target = 'DefaultServer')

  Exit()

  called using wlst.sh TestAppsDeploy.py

  Thanks for all the help!

• load a SWF into another domain and access its functions and variables

  I need to load a swf file into another domain and call its functions and access to its variables, in the same field, I can load and access its functions successfully, but in different areas not.

  control the class security.  Depending on the browser version that you're targeting you might be able to get out of the allowDomain() method, but you'll probably want to use a cross-domain security file.

• Cross-domain and Flash Player 10

  Hello, I used the same file crossdomain.xml years. Now with the release of flash player 10 my application has stopped working. All my users on Flash player 9 work fine, but for some reason any 10 does not work.
  
  I have my swf on a domain and I get my data from another domain; always forced me to use crossdomain.xml file which worked perfect so far. I think I need to change something in the file I'm not sure what. I have attached the code that is in my current crossdomain.xml.
  
  Any help would be greatly appreciated.
  
  Thank you!

  I think I understand my problem and I wanted to post here because I couldn't find any documentation on it. If someone does not know where the documentation on this is please reply with the url.

  Years, I had my crossdomain.xml file to:
  http://mydomain.com/data/crossdomain.XML

  It worked up to flash 10. A new security feature has been added (do not know what or why) and it stopped working. The solution? I had to add an another crossdomain.xml originally from my domain name:

  http://mydomain.com/crossdomain.XML

  Yet once again, I don't have documentation to support this place, but for some reason any, he worked.

  I hope this helps someone else who has this problem.

  Troy

• DNS domain and the connection to the AC network

  I'm new to this so forgive me.

  We are upgrading the workgroup to active directory.

  We have defined the high field and connected a laptop computer to the domain. As part of this exercise, it must configure the DNS.

  A laptop that is connected to the work area (wired / wireless) works very well. The problem occurs when the laptop of the said is removed from the network and connected to another network (wireless home for example). This laptop can now access the internet because it has the IP address of the DNS server configured on the Properties tab.

  Is there a way to turn it? Currently, it takes the Group of 'network configuration operator' enabled on each user account, so they can manually reconfigure the DNS which is something we want to avoid!

  Other useful info or not?

  Server 2008
  Unconfigured WINS

  Thank you

  Hello

  Your question is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for Windows Server on TechNet. Please ask your question in the Forums in Technet Windows Server.

• Controller of domain and DNS behind RRAS without VPN connected directly to the internet with a Cisco router

  I hava a ME Cisco 3400 with physical single port available for a cable connection.

  The ISP give me an IP address interface = 89.120.29.89 to act as a gateway to the IP Address of the host, which is provided for in the order 89.120.29.90.

  The host computer is a dual Xeon computer with two NICs for LAN and WAN.

  Fields of application: to install a windows 2008 R2 between public and private network server.

  Even though I know it's not recomanded, I put the DNS role and directories Active Directory roles installed on the same computer, the computer above, (I do not have enough computer for roles different place on different computers)

  The desired configuration:

  To have installed with his roles behind a WS2008R2 has RRAS. without a VPN.

  b with VPN

  and for WAN access for the client computers of the private LAN Windows 7 OS. (The basin of LAN address 192.168.0.1 - 255).

  First step : to have internet access in the browser (I use Google chrome) (without taking into account the DNS and AD)

  Network configuration:

  Map NETWORK WAN, at the top of the stack of liaison in the Control Panel/network connections and sharing:

  Host IP: 89.120.29.90

  Mask: 255.255.255.252

  Gateway: 89.120.29.89

  DNS: 193.231.100.130 my ISP name server address.

  OK, I can browse the internet.

  Second stage. (Consider DNS and Active Directories)

  DNS instaled role for this computer.

  AD installed as a global catalog.

  NETWORK WAN server that is directly connected to the Cisco router:

  Conection area 3

  Properties:

  Client for Microsoft Netwaork: not verified

  Network Load Balancing: not verified

  File and shared printer: not verified

  QoSPacketScheduler: not verified;

  Microsoft Network Monitor 3 pilot: not verified

  IPv4                                                     ;  checked

  Pilot a Link Layer Topology Mapper i/o: checked

  Link layer Discover responder: checked

  IPv4 tab

  Host IP: 89.120.29.90

  Mask: 255.255.255.252

  Gateway: 89.120.29.89

  DNS: 193.231.100.130 my ISP name server address.

  under the tab advanced

  IP settings : even that, tab IPV4 with automatic metric check;

  DNS tab :

  Add primary and connection suffixes DNS specific: not verified

  Add suffixes primary DNS suffixes parents: not verified

  Add this DNS suffixes: no

  Registry deals with this connection in DNS: not verified;

  Use this connection DNS suffix in DNS registration: not verified;

  WINS tab : enable search LMHOST: not verified

  Enable NetBios over TCP IP: don't check;

  Disable NetBios on TCP IP: checked;

  Connection to the local network 2

  Properties :

  Client for Microsoft Netwaork: checked

  Network Load Balancing: no

  File and shared printer: checked

  QoS Packet Scheduler: not verified;

  Microsoft Network Monitor 3 pilot: not verified

  IPv4 checked

  Pilot a Link Layer Topology Mapper i/o: checked

  Link layer Discover responder: checked

  IPv4 tab

  NETWORK LAN CARD: 192.168.0.101

  Mask: 255.255.255.0

  Gateway: 192.168.0.1

  under Advanced tab:

  IP settings : even that, tab IPV4 with automatic metric check;

  DNS tab :

  Add primary and connection suffixes DNS specific: checked

  Add suffixes primary DNS suffixes parents: not verified

  Add this DNS suffixes: no

  Registry deals with this connection in DNS: checked;

  Use this connection DNS suffix in DNS registration: checked;

  WINS tab : enable search LMHOST: not verified

  Enable NetBios over TCP IP: check;

  Disable NetBios on TCP IP: not verified;

  Install RRAS as NAT (NAT) under any condition imposed by DHCP(not installed) in ideea that RRAS will generate the private IP address of the DHCP allocator.

  In any case, for the beginning, I have a fix IP, do not get IP automatically.

  At this point, it gets the configuration simple posible for RRAS follows:

  3, LAN connection that corespond to the WAN interface IP:

  "NAT configured for the following Internet interface: Local Area Connection 3.
  The clients on the local network will assign the IP addresses of the following range:

  network address: 192.168.0.0. netmask 255.255.0.0.

  After Windows RRAS are open:

  The Network Interfaces tab:

  NICs are enabled and connected;

  UAL remotely & policies:

  Launch NPS,

  on the NPS server tab:

  Allow access to successful Active Directory directories:

  Properties: authentication: port 1812,1645

  kept port 1813,1646;

  on the accounting tab: nothing;

  under NPS policies:

  Grant permission for the RRAS server under builin\Administrator of the accounts;

  On strategy and the type of server unspecified (NAT do not exist as an entry in the drop-down list server dwn)

  under the static road: nothing;

  under the IPv4 tab or both are there(there IP) and are up

  under NAT

  Connection to the local network 3: public interface connected to the internet

  enable NAT on this interface:

  under the address pool: ISP addresses public;(two addresses)

  under the terms of service and the ports: Web server: http 80.

  (I have I have a static IP address for the client computer in mind, I set up a single customer).

  At the client computer :

  configured as domain customer and added to the users AD and computer AD

  logon to the domain:

  Local Area Connection

  Properties:

  Client for Microsoft Netwaork: checked

  Network Load Balancing: not verified

  File sharing and printer: checked

  QoS Packet Scheduler: checked;

  Microsoft Network Monitor 3 pilot: not verified

  IPv4                                                     ;  checked

  Pilot a Link Layer Topology Mapper i/o: checked

  Link layer Discover responder: checked

  IPv4 tab

  Host IP: 192.168.0.101

  Mask: 255.255.0.0

  Gateway: 192.168.0.1

  DNS: (auto-add the same to the local machine).

  under the tab advanced

  IP settings : even that, tab IPV4 with automatic metric check;

  DNS tab :

  Add primary and connection suffixes DNS specific: checked

  Add suffixes primary DNS suffixes parents: not verified

  Add this DNS suffixes: no

  Registry deals with this connection in DNS: checked;

  Use this connection DNS suffix in DNS registration: checked;

  WINS tab : enable search LMHOST: not verified

  Enable NetBios over TCP IP: checked;

  Disable NetBios on TCP IP: not verified;

  right now the 192.168.0.101 client cannot connect to internet through RRAS.

  ;

  This issue is beyond the scope of this site and must be placed on Technet or MSDN

  http://social.technet.Microsoft.com/forums/en-us/home

  http://social.msdn.Microsoft.com/forums/en-us/home

• At startup XP Home a error message: unable to connect system. Check domain and user name are correct.

  The startup in XP Home Edition, the following warning message appears: "system cannot log on. Verification of user name and domain are correct.

  If the user clicks on the "OK" button on the warning box, it allows the password to type in, then open a session.

  This error message occurs no matter what connection parameters are selected in user accounts - with or without password required. And no matter if the main newspaper is the value administrator, user or visitor.

  Is there a work around for this problem?

  Hello

  Take a look at the following:

  You cannot log on after you remove the computer from the domain

• Portable joined to the domain and now the user files are missing.

  Our server (SBS 2003) crashed and I had to rebuild it and then I had to join a laptop in our area and now all the files for this person is missing.  We use the option synchronize folders when this person was missing and now I wonder where all these files are gone?

  We had no backups (I know, I know) so now we have a couple of people who have lost all their data.  Is there a way to make it back the computer joined to the domain?  Some kind of folder offline connection or cache somewhere?  I checked the documents and Settings folder, but the user profiles 'My Documents' is empty.

  Thank you for visiting the Microsoft answers community.

  The question you have posted is related to Microsoft Outlook and would be better suited in the ClientTechCenter of Windows. Please visit this link to find a community that will provide the support you want.

  Lisa
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.