don't update the template files

Similar Questions

• Disabling update the configuration file without stopping the VI

  I would like to perform a function that when the new modules are added in the existing system of the public Service or hot swapping modules autour, the VI can update its configuration file. I don't want the VI to stop we will collect data 24/7.

  I use cFP2220 and two or three modules of different types. I have my work VI and it is fairly straightforward FP read.vi in a time loop. All data are stored in the database using the Labview database tool. My screws are hosted on the local PC, not on the controller. I'm using Labview 8.6.

  I guess I have to get the file configuration (iak), whenever new modules are added, the iak file can be changed (without MAX aperture). In any case, I would have the flexibility to run the VI continuous. I know there is a similar code here: http://zone.ni.com/devzone/cda/epd/p/id/3221and they get the configuration file in the ini file. But I don't know how it's done as I can save only the configuration file as a file iak for FP system.

  Another potential problem associated with that, I guess, is the database format. For now, I use a three column structure, i.e., DateStamp, value and ChannelID. In this case, if I want to add/remove/swap channels, I can just change the ID of the corresponding channel. What happens if I have a horizontal arrangement of the database, namely 10 columns corresponding to 10 sensors, would he be in trouble if I change channels modules?

  Thank you very much.

  There is a way to change the module and programmatically updated the IAK file without stopping the VI.  You will need to change the FP read.vi front right by with the constant e/s FieldPoint.  You will need to use the Open FP, FP create Tag, read FP, and close to the public Service.  The trick to this is that you must pre-create files IAK in MAX first.  The way to do is to set up your cart in a configuration and then find devices to MAX.  Then save the iak.  Then reorganize your bottom of basket to the next setting would have desired, then have MAX find devices and who save in a file different iak.  You will need to do this for each configuration you have.  Then, you need to place the code below when you want to Ministry the configuration file.  I have also included a screenshot of MAX that you can see what the strings are correlated with.

  

• Deleted data file update the control file?

  Hello!
  
  I deleted a file from data in a tablespace. It was done on purpose because I have no more need. Unfortunately
  I have not updated the database control file, now I get an error message:
  
  ORA-01157: impossible to identify or to lock the 202 data file - see DBWR trace file
  ORA-01110: data file 202: "D:\ORACLE\PRODUCT\10.2.0\ORADATA\MINOTAUR\TMP_01.DBF."
  
  How update the control file to get rid of this error?
  
  I use Windows and exit DB 10.2.0.2.
  
  Thank you very much for your help!
  
  Christian

  I think that I made a mistake of reading here.
  Looks like you have deleted a TMP file.

  You then have to join v$ tablespace with v$ tempfile in the statement.

  It's a 10 G (or higher) database?

  Try to drop the tablespace that belongs to this data file, otherwise recreate the controlfile (needs database is offline)

  HTH
  FJFranken

• I just downloaded Bridge and Photoshop.  I don't see the RAW files in Bridge.

  I just downloaded Bridge and Photoshop.  I don't see the RAW files in Bridge.

  Hello!

  Is Photoshop (tell us the version) upward to date?

  You may need to get a new version of Camera Raw that supports your camera files (only one?) outputs.

  It lists the minimum version you need: https://helpx.adobe.com/camera-raw/kb/camera-raw-plug-supported-cameras.html

• Hello, I would like to use JavaScript to update the PDF file.  I saw the 'function' 'SearchAndRedactCmd' where can find no information about it. At that moment, I just find information on what it easy as all THE

  Hello, I would like to use JavaScript to update the PDF file.  I saw the 'function' 'SearchAndRedactCmd' where can find no information about it. At that moment, I just find information on what it easy as all THE

  There is no such command in Acrobat JS. Maybe it's the name of an item in menu or function, that someone wrote.

• I have problem moving my site for a .no, he says I don't have the zone file. What should I do?

  I have problem moving my site for a .no, he says I don't have the zone file. What should I do?

  This isn't something that muse will offer, every time that your DNS is managed, you would need to contact them and request files of area to move the field.

  Thank you

  Sanjit

• I was able to downwload Photoshop and the Prime Minister, but can not have install... it says that I don't have the necessary files, ideas?

  I was able to downwload Photoshop and the Prime Minister, but can not have install... it says that I don't have the necessary files, ideas?

  You can also download the demo version of the software through the page linked below and then use your current serial number to activate it.

  Don't forget to follow the steps described in the Note: very important Instructions in the section on the pages of this site download and have cookies turned on in your browser, otherwise the download will not work correctly.

  http://prodesigntools.com/Photoshop-elements-13-direct-download-links-premiere.html

• Need help updated the VMX file on several Virtual Machine

  All,

  Can anyone help with a problem I'm having?  Here is a brief explanation of what is happening and what we need to solve.

  Recently we found out that we need to add a line in the file VMX of several virtual machines.  In the past, I was able to do this, but would have cold start the virtual machine for the changes to take effect.  Starts cold won't be a problem, because we can program it.

  However, no one knows a way to add this line in the file VMX virtual machines in a cluster.

  Here's the line I need added:

  Devices.hotplug = "false".

  Here is a script that was used earlier (esx 3.0 days) to keep the VM tools updated on reboot.  At this point, if the virtual machine has been turned on, this change could not do through the UI.  However, this script worked to update the .vmx file and then we have cold reboots for the changes to take effect.

  Get-viserver - < Server > - < user > - < password >

  $viview = get-Cluster-name NOMCLUSTER | Get - VM | foreach-object {get-view ($_.ID)}
  $viview | {foreach-object
  $vmConfigSpec = new-Object VMware.Vim.VirtualMachineConfigSpec
  $vmConfigSpec.Tools = new-Object VMware.Vim.ToolsConfigInfo
  $vmConfigSpec.Tools.afterPowerOn = 'True '.
  $vmConfigSpec.Tools.afterResume = 'True '.
  $vmConfigSpec.Tools.beforeGuestStandby = 'True '.
  $vmConfigSpec.Tools.beforeGuestShutdown = 'True '.
  $vmConfigSpec.Tools.ToolsUpgradePolicy = "UpgradeAtPowerCycle".
  $_. ReconfigVM ($vmConfigSpec)
  }

  The exact script can be found in Disable HotPlug

• . Don't update the AI Illustrator files in After Effects

  CC Yes after effects 2014 (and perhaps older versions?) had a feature that I really liked where if you have imported an illustrator (.ai) file into After Effects, you can change this file in Illustrator without having to re - import the file back into After Effects. The image would automatically update.

  I use CC AE 2015 and Illustrator CS5.1 and this method does not work. The illustrator file to update or change, even when I reload the film or purge the memory of the software. Also, I rebooted my computer for fun, but that did not work. This functionality has changed in 2015 After effects version? Y at - there a step I'm missing?

  Here is my example. I want this red screw to have fewer teeth, so I deleted my teeth in Illustrator up to five:

  

  After this change and in saving it, nothing changes in After Effects. He holds the stick to the old version of the screw, which has about nine teeth:

  

  It could refer to a preview stored in the cache, serving and see if that makes a difference.

• problem updating the ini file ini file

  I get the ip address of the user's input and to replace the old IP in the .ini to the last ip address file but the problem is when a user enter the IP and I write it in my ini file it does not at once, but if I do it twise in calling the same function of my command button twise then my ini file is updated , it is the strage iniwrite function returnes success although on first attempt. I checked with breakpoint, but when I do it twise, then it is done, please guide me in detail, I am really amayzed by this strange behavior...

  

  I already gave you the exact order of the functions in my previous message!

  Ini file tool generates an object in memory that allows you to store and locate the values. This object can be filled in reading a file on the disk; Similarly, it can be saved to a file on disk. This is the very first operation and the last to perform if you want a picture to date of your values on the disk. There are three layers to consider:

  1. The file on the disk
  
  
  2. The IniText object in memory
  
  
  3. The variables specific to your program

  With this in mind, the right order to update the file on the disk so that it reflects the value that your variables have in memory is:

  Ini_New create the object in memory

  Ini_ReadFromFile fill it with the contents of the disc

  Ini_get('sendmail_from') read of the idebugprogramnode2 memory in your program variables

  Here tou can update the values of program

  Ini_Put update the object of memory with the contents of your variables

  Ini_WriteToFile save everything on the disc

  Memory Ini_Dispose clear

  As you save on disk before you call the Ini_Put functions, the disk image is not updated

• Don't see the hosts file, I'm trying to block the ads of my browsers

  Hello

  I'm trying to block ads in my browser but when I go to c; Windows/system32/drivers/etc I do not see the Host file I virtue see a file while properties indicates that it is 5 archives. I need to add some info on the hosts file how to make this file show. Although I don't see it when I try to paste a modified hosts file it won't allow replacement of Martin

  I use XP.

  Thank you

  Catalin

  Click Start--> go in run and paste the following entry: %systemroot%\system32\drivers\etc

  You now see the hosts file?
  If this is not the case, try this:
  1. click on start go to run-->
  2. tap------(literally just a------and nothing else)
  3. press on enter
  4. click on Tools--> folder--> view options
  5. make sure that a small black dot appears next to 'display files and folders '.
  6. scroll down for 'show hidden files and folders' and remove the checkbox from "Hide protected files (recommended) operating system.
  7. click on 'yes '.
  8. click on 'Ok '.
  9. click on start--> go in run and paste the following entry: %systemroot%\system32\drivers\etc
  If you * see the hosts file now, right-click on it and make sure that there is no check mark 'read only' and 'hidden' boxes... If they are verified, then remove the check.
  Note: you should not have to perform steps 1 through 8 to view the hosts file; the hosts file is visible even with these settings, the default value (for example, when files are hidden you should always see the hosts file), but you may have a spyware infection that has tried the hide and prevent changes in the host file (to prevent you from making corrections in the file which made spyware)
  assuming that you have made any customizations to this file, it should appear as the default value listed in this Microsoft article: http://support.microsoft.com/kb/972034
  If it looks not to the default file listed at this URL, then you can recreate the file by using the templates included in this document KB

• Models don't update the pages. Need urgent help!

  Hi, I recently had a problem with my models (nesting error of editable regions) here is the link to my previous post. Here

  So I put to update my models with my file "mockup.php" now when I try to update my pages through my templates, that is what is happening.

  I save my template and it came with this box:

  http://i47.Tinypic.com/1t7zu9.PNG

  I click on "Update" and get this:

  http://i47.Tinypic.com/34rwyfo.PNG

  But it is not actually update the pages.

  Is there a way to fix this without rebuilding the entire site?

  Thanks, MissileMoose

  You update an editable?

• Automatically update the sequence files (any)

  We have a very large number of sequence files that must be updated.  The "Types" have changed.

  Is it possible that TestStand (f1 2010) updated all the files in a directory, or if all goes well recursively?

  What I am used to doing is to check all the files off our Version control, select about 20 files simultaneously and open them in TestStand, save all, and then close them, then make another game...

  Is there a faster way?  (I expect to archive them out of Version control.)

  Mike

  Take a look at the converter file sequence located in tools > sequence of update files

• Windows media player not automatically opens a music file by double-clicking the file, but don't open the music file to play if windows media player is already open

  Is there a way to open the music files by double clicking on the music files without having to the open WMP?

  Hello

  -What happens when you double click on the music file? It opens in another program?
  -Don't you make changes to your computer because of which the question began?

  Follow these steps and check if they help.

  Step 1:

  At first I would recommend you change the file association music playing in Windows Media Player and check if that helps.

  http://Windows.Microsoft.com/en-us/Windows-Vista/change-which-programs-Windows-uses-by-default

  Step 2:

  Test the issue in a clean boot State.

  Note: Follow step 7 to your computer as usual.

  Step 3:

  Test the issue in a new user account.

• Update the text file app/native/assets/data/in the workspace?

  I'm having a problem with updting a compressed file that is updated via a Web service.

  It is pretty simple what I'm doing. first wait for the answer

  QNetworkReply * response = qobject_cast(sender());

  check the data, etc.

  location of the file is "app/native/assets/data/somefilename.txt".

  QFile file (type);
  If (file.exists ()) {}

  leader. Open(QIODevice::WriteOnly |) QIODevice::Text);
  QTextStream out (&file);)
  off<>

  leader. Close();

  }

  It works fine on my local machine when I run it on my Z30 by momentics.

  But once I have add to my BES server and pull down on my workspace, the file is not updated. I can see the file updated in the application is correct the only thing is that the file not updated text.  From what I see the "app/native/assets/data / ' is read-only.

  My question is how update you text files that were packaged in the instalation of the app "app/native/assets/data / '?

  Thanks in advance

  It is not possible, assets / is read only when the application is deployed to the device, it is only readwrite on Simulator. data / folder can be used instead.

  Optionally, the file may initially active resident / and can be manually copied to data / on the first start of the application. After that it can be updated in the data / folder.