Cannot install the device hpq0004 drivers

Similar Questions

• CODE error 39 try installation, gel, try the registration program, said driver update driver update, nothing works, still cannot install the device driver

  I try, nothing works. I try the system restore, try supportmicrosoft.com and they fix it, but when I open the Device Manager, my cd/dvd drive are still '?  When I install the new window to solve the problem, window would not install the new program because it says I have no device driver for the cd/dvd drive.

  Help.

  Hello

  Code 39 means that the driver is corrupted or missing.

  Please make all below even if you have done some before as it is often the set of operations which solves
  the question.

  Try this - Panel - Device Manager - CD/DVD - double-click on the device - driver tab - click
  Update the drivers (this will probably do nothing) - then RIGHT click the drive - UNINSTALL - REBOOT
  This will refresh the default driver stack. Even if the reader does not appear to continue below.
  
  Then, work your way through these - don't forget the drive might be bad, could be a loose cable or
  slight corrosion on the contacts (usually for a laptop) and other issues.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error during the installation of Windows Vista after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
  ends. Remove and replace, do not just tight. For laptops, you can often clean power and
  contacts data with a pencil eraser.

  --------------------------------------------------------------

  Also check with your system manufacturer to see if there are any updated drivers for your DVD. Or even if it
  are you can reinstall the 'old'. Many use Windows default drivers however some special aura
  ones. Also check the website of the manufacturer of the car.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  Hope these helps.
  Rob - bicycle - Mark Twain said it is good.

• Cannot install the device (printer and copier) Multifunction CANON PC-D340

  Original title: PC-d340gerat

  Hi, I am trying to install the software CANON PC-D340, but it does not work for my Multifunction (printer and copier) device. I use Windows 7. According to Canon Windows 7 is compatible. Maya

   

  Hello

  1. do you get an error message?

  2. did you of recent changes to the computer before the show?

  I suggest the following methods and check if it helps to solve the problem.

  Method 1: Reinstall the latest version of the drivers on the manufacturer's Web site.

  Uninstall the drivers for Windows 7 computer, and then reinstall the latest version of the drivers on the manufacturer's Web site.

  Find and install printer drivers in Windows 7

  http://Windows.Microsoft.com/en-us/Windows7/find-and-install-printer-drivers

  Please see the link to contact the Canon Support.
  http://www.Canon.com/support/

  Method 2: Install a printer

  http://Windows.Microsoft.com/en-us/Windows7/install-a-printer

  You can also check out the article below and follow the steps there to any problem with the printer.

  Printer in Windows problems: http://Windows.Microsoft.com/en-us/Windows/help/printer-problems-in-Windows

   

  I hope this helps.

• Error: "the process cannot access the file because it is being used by another process." when treid to install the device driver

  Original title: Windows cannot install the drivers

  I had a lot of trouble installing the drivers on my Windows computer.  I went straight in the Device Manager and deleted the devices I tried to install and reinstalled them, I went into safe mode, I got Windows to run the console and only the basic process and run from there Device Manager... no matter what I do the same mistake.

  "The process cannot access the file because it is being used by another process".

  Even after a restore of the system, he did this, and I don't know what to do anymore.  Only devices that have been previously installed work.

  What's more important install my Blackberry software because my phone is broken.  The software cannot detect my phone because the drivers have not been installed.  Most of the devices I can use with Linux (I have Windows Vista and Ubuntu running on the same computer), but RIM don't make Blackberry for Linux software, so I have to do it on Windows.

  Hi paco2012,
   
  1. did you of recent changes on the computer?
  2. how many user accounts you have on the computer?
   
  Try these steps and check the result.
  Step 1: Install the driver as an administrator
  a. shut down the computer runs.
  b. start the computer and the connection as an administrator.
  c. find the driver configuration file, right-click on the file and click "Run as Administrator".
  d. follow the instructions in the wizard to install the driver.
  e. restart the computer once the driver is installed.
   
  Step 2: Try to install the driver to boot either by disabling all non-Microsoft programs
  a. open the article: http://support.microsoft.com/kb/929135
  b. Article, follow "step 1: perform a clean boot."
  c. restart the computer.
  d. install the driver and verify the result.
  e. follow "step 7: reset the computer to start as usual.
   
  Kind regards
  Syed - Microsoft technical support.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Windows 7 64 bit, cannot install the driver for bluetooth devices for my Motorola Droid Razr periferical

  Windows 7 64 bit, cannot install the driver for bluetooth devices for my Motorola Droid Razr periferical. When troubleshooting try to apply the fix, after trying, it ends with a message this problem "not set"...

  I finally found the help on my own. Download and install Windows Mobile Device Center. After installation, you'll swear that nothing has been installed, but there is a. The download says it's for Vista, but it also shows Winkdows 7 under system requirements. This is from the download I used.

  Go in Device Manager for each item under the heading Bluetooth with an asterisk, double-click it. Click the tab drivers, then put to update driver. Browse my computer..., let me pick from a list... Under manufacturer, select "Microsoft Corporation". Under model, click on "Windows Mobile-based device support", and then click Next. Click 'YES' in the driver warning window. Windows will now update the driver, and he will tell you, he did it with success!

  This solved my problems. Good luck with yours.

• HP 15r-250tu: cannot install the drivers for the new laptop

  Hi expert, I bought a new laptop from hp 15r-250tu. I installed windows 7 ultimate (64-bit) service Pack 1. Cannot install the drivers for my laptop.i IAM downloaded all the drivers available on the site of hp for this model laptop.i tried to install them in the order as the mentioned error messages, but get that my phone does not support these drivers. Please answer me with links of driver and sequence to install. Thank you.

  Hello:

  Use the W7 x 64 drivers for the HP 250 G2 on your model except file BIOS, firmware, wireless and bluetooth.

  http://h20564.www2.HP.com/hpsc/SWD/public/readIndex?sp4ts.Oid=5449369&swLangOid=8&swEnvOid=4059

  Wireless:

  http://h20565.www2.HP.com/hpsc/SWD/public/detail?sp4ts.Oid=6943827&swItemId=ob_149229_1&swEnvOid=4058

  Bluetooth:

  http://h20565.www2.HP.com/hpsc/SWD/public/detail?swItemId=ob_149791_1

• Cannot install the drivers and software for HP Deskjet 5650

  I removed most of the HP entries to my printer from the Start Up. Since then I have not been able to get the Printer Wizard to start. Recently, I uninstalled everything related to the printer from Add Remove programs. Since that time I tried to install my HP drive. It comes up with the error that the software does not support my operating system. My operating system is Windows XP Home Edition SP3. The software is looking for Windows XP. I downloaded the drivers and software from HP. When it runs, it starts very well. For some reason, it isn't detecting my printer. After you select how the printer is connected to the computer and the connection at the same time the software tries to finish, but he comes up with an error and says it cannot complete the installation. I am able to install the drivers, but when I try to install the drivers and software is when the error appears. How can I fix? It would be nice to use the wizard for printer hp again.

  I found the solution to my problem. Before I could install the software and drivers for my printer that I had to remove completely all the software and the printer driver. Here's what I used to delete the printer driver. Restarting my PC after removing the printer driver has been the most important step. Everything works fine now.

• Satellite P750 - 02Q 001 - cannot install the Bluetooth and Tuner DVB-T_ATSC Yuan

  I have more than 20 years and the first time ever answer concerning support for the installation of a driver... sheeezz

  Recently bought laptop below and formatting of disk with WIndows 7 ultimate + SP1 (64-bit)

  Australia
  TOSHIBA SATELLITE P750 - PSAY3A - 02Q 001

  Cannot install the latest drivers below (everything worked when bought the laptop):

  -Yuan DVB-T_ATSC Tuner driver (for TV Tuner model only) driver 2.3.3.31 Windows 7 64 - bit 2.9 MB
  -Bluetooth Stack for Windows by Toshiba Bluetooth 8.00.06 (T) Windows 7 64-bit 78,08 MB

  * DVB - T Tuner Driver *.
  The EXE file extracted in the temp folder and goes no further.
  The device driver shows "STK7700D" with an exclamation mark against it. See the image below.

  * Bluetooth Driver *.
  First installation install the original driver, then he received close to 50% through the installation (appears to fail to install the components of RF RFBUS).

  Then install attempt fails to go too far (is unable to install the driver at all).

  Third attempt and subsequent attempts to repeat the foregoing in order. Install it just gets to a point and is unable to go any further.

  I tried to disable all Wireless WAN and various other comments and try the install again. Repeats exactly as above!

  Refer to pictures:

  DEVICE MANAGER
  http://I52.Tinypic.com/35cr38i.jpg

  1ST COURSE SETUP
  http://I52.Tinypic.com/2r6jfv9.jpg

  2ND INSTALL PROGRESS
  http://i55.Tinypic.com/jgphfc.jpg

  see you soon

  Dennis

  > The EXE file extracted in the temp folder and goes no further.
  > The device driver shows "STK7700D" with an exclamation mark against it. See the image below

  Try to extract the exe from another place, not in the temp folder.
  In my case, I created a folder on a second partition (D) and have extracted the exe file in this folder. Can go to the Device Manager, and then can install the driver through the Device Manager.
  Choose the installation procedure advantage and point to the folder that contains the extracted files.

  With regard to the issue of the BT;
  Download the new battery of BT from here:
  http://APS2.toshiba-tro.de/Bluetooth/

  Then clean the registry using the CCleaner.
  This tool is freeware and can be downloaded on several different pages.
  So after cleaning check if you could install new BT of the register stack.

• Satellite C50D-A-133 with Win7 - cannot install the USB 3.0 driver

  I Satellite, C50D-A-133 with Win 7 x 64 and cannot install the usb 3.0 drivers.
  I download the driver from the support site of toshiba for usb 3.0 for win7 x 64 and it starts to install the driver, but in the end it saids...
  Windows found driver software for your device but encountered an erroe trying to install it.
  AMD USB 3.0 host controller
  The system cannot find the specified file.

  I try to point the location of the driver but same error.
  Other drivers installed ok only gives error

  I ve downloaded and unzipped the driver and everything seems OK.
  As far as I know laptops equipped with platform AMD isn't chipset driver and after installing display driver must be installed USB driver.

  Try to download it again and start the installation manually.

• Cannot install the printer and windows update error 80070026

  Original title: Registry Editor not work cannot install the printer

  I have Vista the operating system on a Dell laptop with a Core 2 duo, map of Nivea.  Norton Antivirus now after it has started.

  Tried to install the dell printer after uninstalling all printers.   I scan my system using promp... sfc/scannow then I got windows results resource protection found corrupt files but was unable to fix some of the them.details are included in convertible bonds. Journal windir/logs/CBS/CBS.log
  for example:C:/windows/log/cbs/cbs.log

  I looked in the directory C find regedit.exe to rename, but was unable to find it.   I found these if this can help.

  Regedit.exe.4288.dmp
  Regedit.exe.3280.dmp
  Regedit.exe.2292.dmp

  I also got error or popup that without running windows Explorer and then restart it.   I can't install the printer as it pops up and I need to close the program.

  also receive error installer that it is already running
  install GUI is unresponsive

  error code 80070026 during the installation of windows updates.  I open without addons and updates are all to date.

  I'm sorry that there is so much information and error codes.  I think that all what concerns the corrupted files.   Can you help solve c drive please.

  Hello

  1. What is the serial number and model of the printer?
  2. What are the failed updates?
  3 have there been any changes made on the computer before the show?

  I suggest you try the steps to solve the problem with the installation of printer.

  Method 1:
  Run the Fixit and check if it helps.

  Hardware devices do not work or are not detected in Windows
  http://support.Microsoft.com/mats/hardware_device_problems/en-us

  For more information, see the links:
  Find and install printer drivers
  http://Windows.Microsoft.com/en-us/Windows-Vista/find-and-install-printer-drivers
  Search for a printer, the manufacturer Web site
  http://Windows.Microsoft.com/en-us/Windows-Vista/find-a-printer-manufacturers-website
  Add or remove a printer
  http://Windows.Microsoft.com/en-us/Windows-Vista/add-or-remove-a-printer

  I suggest you try the steps to fix the problem with Windows Update.

  Method 2:
  Put the computer in a clean boot state to see if there is a software conflict as the clean boot helps eliminate software conflicts.
  http://support.Microsoft.com/kb/929135

  Note: After completing the steps in the clean boot troubleshooting, follow step 7 link to return the computer to a Normal startup mode.

  Method 3:
  Temporarily disable the security software.
  http://Windows.Microsoft.com/en-us/Windows-Vista/disable-antivirus-software

  Note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable the antivirus software. If you do not disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network at the time the anti-virus software is disabled, your computer is vulnerable to attacks.

  Method 4:
  You can also manually install updates (KB number) by downloading from the Microsoft Download Center.
  http://www.Microsoft.com/downloads/en/default.aspx

  For more information, please see the links.

  Problems with installing updates
  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-installing-updates
  You cannot install some programs or updates
  http://support.Microsoft.com/kb/822798

  Important: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:
  322756 (http://support.microsoft.com/kb/322756/)
  How to back up and restore the registry in Windows

  Warning: An upgrade on the spot is the final solution before you have to reinstall the operating system. Note that it takes as much time to do the upgrade as to reinstall the operating system. In addition, some of your custom Windows settings may be lost through this process

  Hope this information is useful.

• Impossible to install the device driver

  Had to reinstall Windows 7 due to a malware.  All cleared up and works normally except for one thing: even if I reinstalled Windows using a DVD, my CD-ROM/DVD-ROM drive does not.  I troubleshoot-made the problem through "Devices and drivers" of the control panel.  He tried to reinstalled the driver but in vain.  Then I went into the Device Manager.  I found that the latest version of the software has been installed and received a message that Windows cannot start the device because the information of configuration (in the registry) is incomplete or damaged (code 19).  I uninstalled the driver, restarted the computer and tried to reinstall the driver.  Unsuccessful.  Any ideas?  Thank you.

  Here's the answer: http://answers.microsoft.com/en-us/windows/forum/windows_other-gaming/error-code-19-cddvd-rom-problem-please-help-and/d8dbbbe7-cf88-4d18-b4b4-c8851fe5736c

• Cannot install the update error

  I'm trying to update my iPhone 6 16 GB running iOS to iOS 9.3.1 9.2.1 but when I try to install the OTA update it says "cannot install the update." How could I solve this problem? The contact ID is not available because the unit is gray with a white screen and a contact ID button or space, which affects the update process?

  I would try to update via iTunes

  Connect the device using a cable to a computer (PC or Mac) running the latest version of iTunes 12.3.3

  The time that the phone is detected, choose software update

  If the phone is not detected - see here

  If iTunes does not recognize your iPhone, iPad or iPod - Apple Support

  OR

  Please take a genius appointment at an Apple Store, or select another authorized service provider.

• Satellite L650 - 1 M 0 - cannot install the new display driver

  Hello!

  I have the Toshiba Satellite L650 - 1 M 0, and I can't install the new drivers for my graphics card: Mobility Radeon HD 5650 from the AMD website. Why can't I do it? I want to install the latest display drivers, because I have problems with the display mode. My laptop is set to 16:9, but some programs display in 4:3.

  Please give the latest drivers on the Toshiba site or tell me what can I do to download the drivers from the website of AMD. I have Windows 7 64 x;).

  > Why can't I do it?
  I m wondering really you ask something like that. It is well known that the support for mobile devices (laptops) is offered by laptop manufacturer and not by the hardware manufacturer.

  Because of the design of specific laptops with limited cooling performance graphics card can not be upgraded as on maps graphics designed for desktop computers. New driver means more performance. More performance means more heat and result can be damage of graphics card or switch-offs due to temperature-critical material.

• To install the device driver required to access your hard drive, insert the installation media containing the driver files, then click OK."

  I'm trying to move from xp to windows 7. I spent all the requirement but she says to install the device driver required to access your hard drive, insert the installation media containing the driver files and then click OK. "what should I do? Where can I find the driver?

  Guess he would seek software/drivers for the chipset MB

  & sata/IDE controller software. Get the MB hardware specifications, go to the mfg

  Web site & download the software and drivers. If intel, download the chipset installation

  utility & install it 1. The other would be the SATA or / and drivers for the MB IDE

  controllers, 'Matrix Storage console' would be the one, also chk for desktop

  Internet downloads, amd, and other brand materials would be substantially the same.

• Cannot install the driver/software package

  HI (sorry for my English, I'm a Spanish speaker).

  I have an all in a psc 1315 and cannot install the software/driver from the site in a new 32-bit Windows 7 PC.

  I tried everything I could find in the forum and on the outside.

  I downloaded the driver from:

  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?OS=4062&LC=ES&CC=ar&DLC=es&sw_lang=&product=3745...

  and it can run fine.

  When the instalation starts fine, after the license agreement, when the installation is always "system analysis", he shutdow. Close the installation without an error message. Don't just run the next step.

  So I can't install anything, can not get the HP Solution Center and other software for analysis.

  Is not the antivirus, I tried to close the shields in time, not if.

  I guess the Installer (AIO_CDB_NonNet_Full_Win_WW_130_141.exe) in the site's just failed.

  I extraxt .exe files and tried to install the Solution Center in the "setup" folder inside, don't let me do. And it has a lot of files with configurations of software I don't know what I need those.

  Can I connect the printer without the software, while adding in windows and it works for printing and browse the WIA, but in this way the "Scan" button on the HP psc 1315 do not work.

  Hello

  Still, the installation problem you are facing, in order to avoid any installation problem, please also make sure that the USB printer is disconnected, enter the control panel > devices and printers, remove any printer PSC 1310 listed and restart the PC before the installation.

  And regarding the specific error:

  Start the installation and follow the steps.

  Once reached the license agreement window, click the 2nd link above (using the Internet).

  Make sure that the two options set as No, thank you.

  Accept the license agreementt continue following the install.

  You see a difference by changing these settings?

  Kind regards

  Shlomi