Double disk bootcamp windows problem

Similar Questions

• USB 2.0 does not work in bootcamp Windows 10

  Hello

  I try to use my USB 2.0 USB drive on my MBP 13.3 "in bootcamp Windows 10 and it does not appear in windows Explorer. The USB key is displayed in the device however Manager. I tried my hard drive that is USB 3.0 and it works fine, but the USB does not work. I have tried many different solutions and none seem to work including physical relocation and replacing the USB name i.e. H: U:. In disk management, the device is there but says "no media" below.

  Someone at - it suggestions as to how I can get the USB appear in Windows Explorer and access the files?

  Bravo to all the answers in advance.

  the device is considered that the format is not. In some cases shaped on the Mac in Fat32 or ExFat is not readable under Windows. Reformat the Windows Fat32 or ExFat Device Manager device, it will destroy the data and mount the drive. In turn the unit may become unusable which can occur over time.

• Difficulties Bootcamping Windows XP

  I just upgraded to a 1 TB HD on my Mac Mini early 2009. I had my previous HD, Bootcamped Windows XP, which is the only OS that runs an antique program I use to return to the top of my all as old Sharp Zaurus PDA. I want to maintain this capability, but my newly improved Mac Mini even will not accept the installation disk Windows XP Professional original, instead of this ejection after a minute or two without recognizing in the Finder. I would be very grateful for all of the useful ideas. Thank you.

  Just install xp in oracles free virtualbox virtualmachine, it's a world easier

• How (re) - add Apple keyboard to Bootcamp (Windows 7)

  Hello, I've been running bootcamp windows 7 on iMac no problem for two years.  It was wired apple keyboard (w / numeric keypad).  Today it suddenly stopped working.  It does not show as one of the screen "devices."  I plugged on a MacBook, work very well.  so the problem doesn't seem to be the keyboard itself.  All devices plugged into USB work fine, it's not the USB ports.  Also tried to add the wireless keyboard that came with the iMac does not recognize.  Can anyone help?  Thank you.

  Hey there cl6120,

  Welcome to the communities of Apple Support!

  Let's take a moment and get the keyboard to work again, your Windows partition. I can imagine the challenge of computing without it! To ensure that your information is protected, it is always better to create a backup of the entire system. Find the steps detailed here:

  Use Time Machine to back up or restore your Mac

  Go ahead, this is an incredible resource that directs you to a resolution:

  Use your Windows with Boot Camp Apple keyboard

  More precisely...

  If your keyboard does not work

  When you use Bootcamp to install Windows on your Mac, it installs the Windows support software (drivers) that allow you to use the features of the Apple keyboards in Windows. If your keyboard works start from your Mac OS X but not of Windows, try to reinstall the Windows support software from the Boot Camp Assistant.

  See you soon!

• Use floppy disks with Windows XP.

  I want to run a few disks using Windows XP. Should be simple.  I tried using A:\setup and also double click on the Setup icon. Nothing happens.

  Any suggestions?

  Don

  I was using a reader external floopy. But I didn't have it works on another computer, also WinXP.  I will go back to the other computer and try again, maybe using a different USB port.

• How often should I run check disk in windows vista edition Home premium?

  How often should I run check disk in windows vista edition Home premium? Part of a regular maintenance schedule disk check?

  How often should I run check disk in windows vista edition Home premium? Part of a regular maintenance schedule disk check?

  There is no reason to run it on a regular basis. Run only when you have reason to suspect a problem.

• Windows Installer + VSS + Windows problems in Windows 7 SP1 Activation

  I used this Windows 7 machine for 5 years now and has recently encountered several problems, which probably are closely linked:

  1. Windows installation problem
  Can't update programs, although new install if they do need Windows Installer to do. Most but not all Windows not updates install.

  2. the problem of volume shadow copy Service

  Failed to create system restore points. With VSS errors appear when I try to do. No previous restore point is available.

  3. Activation of Windows problem
  A pop up keeps appearing every 1 or 2 hours, saying that my computer is not running genuine Windows. Obviously nonsense since this PC was bought during the original Service Pack 1 of Windows 7 and I've never had a problem before.

  I searched a lot online to solve all these problems. I tried hundreds of possible solutions, but nothing has worked. I think that it is all caused by the same thing, but I am unable to find it.

  Ready to provide more information. Thanks in advance.

  (PS: my camera has a pre installed Windows 7 so I own not a Windows DVD, don't want to reinstall the OS, prefer to try to find the cause of the mess)

  Do you have same problems if you create a new user account?

  What Antivirus utility you installed?

  Have you installed a new hardware or software or both since you started these problems?

  Could you describe some of the thing things you've tried?

  Start by checking your hard disk for errors:

  Click Start

  Type: CMD, according to the results, right-click CMD

  Click on "Run as Administrator"

  At the command prompt, type: chkdsk /f /r

  When you restart your system, your computer will be scanned for errors and will try to correct them.

  then

  Click Start
  Type: CMD, according to the results, right-click CMD
  Click on "Run as Administrator"
  At the command prompt, type: sfc/scannow

  This will check for any breach of integrity

  Restart your system

  You can also try to perform a repair upgrade to see if it works. You need to download a copy of the edition of so that your system is under license:

  Download Windows 10, 8, 7 ISOs

  https://www.heidoc.NET/Joomla/technology-science/Microsoft/67-Microsoft-Windows-ISO-download-tool

  then

  How to make an upgrade of the repair - Notebooks.com

• Try to mirror a disk with Windows 7 Professional

  I would like to mirror an external drive with a second external dive.  I can't find documentation on how to accomplish this task.  The main drive is configured as dynamic with a simple partition and it contains data.  I tried different configurations of the mirror planned but none seem "ungrey" option to add a mirror on the main disk drive.

  Any guidance would be appreciated.
  What more frustrating, it is only while creating an interlaced together in place is documented, mirroring doesn't seem to be.

  Hi Kfrey,

  Connect to the remote computer

  1. connect you as an administrator or as a member of the Administrators group.

  2. click on start and then click Control Panel. Click performance and Maintenance, click Administrative Tools and then double-click computer management.

  3. right click on the (Local) computer management and then click on connect to another computer.

  4. click on another computer, type the name of the computer to which you want to connect, and then click OK. Or, click Browse to locate the computer, and then click OK twice.

  The computer from the remote computer management window is displayed. Expand storage (if it is not already expanded) and then click Disk Management.

  Create a mirrored on the remote computer Volume

  1. in the disk management window, right-click on the space unallocated on one of the dynamic disks in which you want to create the volume mirrored and then click New Volume.

  2. in the new Volume Wizard, click Next.

  3. click on the mirrored volume, and then click Next.

  4. under all available dynamic disks, click the disk in which you want to host the mirror, and then click Add. Verify that the disks in which you want to create a mirrored volume are listed in the selected dynamic disks box.

  5. in the size box, specify the amount of unallocated disk space to use for the volume, and then click Next.

  6 assign a drive letter or path, and then click Next.

  7. set the options for formatting that you want to use, and then click Next.

  8. check that the options that you selected are correct, and then click Finish. The mirrored volume is created and appears in the dynamic disks in the disk management window.

  9 leave the management of the disks on the remote computer.

  Thank you, and in what concerns:
  Shalini Surana - Microsoft technical support.
  Visit our Microsoft answers feedback Forumand let us know what you think

• Not authentic "Windows" problem

  Story: My Dell Inspiron laptop has been running Windows Vista when initially purchased in 2009.   Dell has provided a free upgrade to Windows 7, and this upgrade went well several years ago.  Thus, the machine has been works well on Windows 7 Home Premium Service Pack 1 for awhile.
  Don't know if this is important: a couple of months, I replaced the hard drive.   I did a backup/restore image for the operating system on the new drive.   I don't think that I was invited to return keys validation of Windows at this time here.   I had no problem and the machine worked well after the replacement of the hard disk.
  Now, all of a sudden I get a pop up window that says "this computer is not running genuine Windows.
  However, my Windows is genuine!
  I tried to solve the problem by installing the WindowsActivationUpdate.exe, but will not install.   I get the error message "update installation failed.   Information about the error - 0xC8000247
  I tried to get the Windows product key (from the sticker on the bottom of the laptop) via Control Panel/system/change the product key but it says invalid key!
  Something is clogged to the top, but I don't know what.
  Thanks for any help you can provide.

  Thank you for your response.    I tried several related suggestions and more did not help.   That seems to have solved my problem of Windows Update is reinstalling the technology Intel Rapid Storage Technology driver as suggested by george1009 in your third link above.

  As for my Activation of Windows problem, I typed in the wrong product key.  I entered the key on the sticker on the computer, but it is valid only for Windows Vista (original OS), but not for Windows 7 (current operating system).  I found that my Windows 7 upgrade disk envelope and who had the key valid on it.
  Thanks again for your help.

• Mounting USB dynamic disk under Windows 7

  Hello, I have a computer that is running windows 7, 32 bit.

  I have an older hard drive of a computer windows XP I want to retrieve some files of.

  The old hard drive is a dynamic disk in windows xp.

  I have connected the dynamic disk to my computer windows 7 via a USB cable.

  Problem: Windows 7 won't let me up the dynamic disk unless I convert it to a basic disk? If I convert it to a basic disk I will lose you all data.

  Question?  How can I mount the dynamic drive USB on a windows 7 without losing any data on the dynamic disk? Do I need special software?

  Hi, Alex_703,

  Non-destructive how to convert dynamic disks to basic disks

  http://mypkb.WordPress.com/2007/03/28/how-to-non-destructively-convert-dynamic-disks-to-basic-disks/

  ...... Convert to basic without data loss

  http://blog.remyservices.NET/2010/03/24/how-to-convert-dynamic-disks-back-to-basic-disk-without-losing-data/

  How to Access or mount GPT Protective Partition in Windows XP?

  http://www.dynamic-disk.com/resource/GPT-Protective-partition.html

• How to create the recovery disk in Windows 8

  Original title: HELP! I need to know how

  I recently got a laptop HP 2000 for Christmas. She has windows 8, which I'm not too used to it. And I can't understand how or where to go to create a recovery disc for it before you put anything else on my new computer laptop.  How can I do this? Any help would be appreciated.

  Hello

  Recovery of the system and the disk recovery options
  http://Windows.Microsoft.com/en-us/Windows-8/system-recovery-disk

  Create a recovery USB disk
  http://Windows.Microsoft.com/en-us/Windows-8/create-USB-recovery-drive

  How to create a system image to refresh your PC in Windows 8
  http://support.Microsoft.com/kb/2748351

  Some manufacturers have integrated recovery methods to verify with the help of HP, their online
  documentation and ask questions in the forums about known problems.

  HP support/troubleshooting & drivers
  http://welcome.HP.com/country/us/en/support.html

  Contact HP
  http://welcome.HP.com/country/us/en/contact_us.html

  HP forums
  http://h30434.www3.HP.com/PSG/

  =========================

  While on the screen type start - Help

  Or Win Key Q plus Apps search - help

  Or charms - Search - Apps - Help Menu

  After that the foregoing-> on left click-> Help and Support.

  ==================================

  Solution Windows 8 - left Center - learn more
  http://support.Microsoft.com/GP/Windows-8

  Meet Windows - a good start
  http://Windows.Microsoft.com/en-us/Windows-8/meet

  Get to know Windows
  http://Windows.Microsoft.com/en-AU/Windows-8/basics#1TC=T1

  How-to: get acquainted with Windows
  http://Windows.Microsoft.com/en-AU/Windows/how-to#2TC=Windows8

  Contact: call, tap and beyond
  http://Windows.Microsoft.com/en-AU/Windows-8/touch-swipe-tap-beyond

  Is a free and convenient application available on the Store - Top Free
  "Windows 8 Cheat Keys.
  http://apps.Microsoft.com/Windows/en-us/app/Windows-8-cheat-keys/24f62990-98c7-4c26-95cb-cb09267680e8

  ==================================

  There is no start or the Windows 8 Start Menu button.

  Where is the start menu?
  http://Windows.Microsoft.com/en-us/Windows-8/where-is-start-menu

  Customize the splash screen
  http://Windows.Microsoft.com/en-us/Windows-8/start-screen#1TC=T1

  Windows 8 is not available classic appearance.

  3 third party programs can help:

  StarDock - Debut8 - costs 4.99 $US
  http://www.stardock.com/products/Start8/

  Free

  Classic interface
  http://www.classicshell.NET/

  Pokki
  https://www.pokki.com/Windows-8-Start-menu

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• Photoshop cs4 access denied when you try to install from disk in Windows 7 64 bit.

  Photoshop cs4 access denied when you try to install from disk in Windows 7 64 bit. I tried in

  safe mode and it starts to install, but get an error there as well.

  What should I do?

  So when you put the disk in it does not work properly? When the disc is inserted, you should have a window pop up with 2 options. 1. install and another to see what is on the disk. Choose to open the disc or explore. Navigate to the folder where is the photoshop CS4 .exe file (which runs the Setup program), right-click on the .exe file and choose Run as administrator and it should start. See if it will install. If this isn't the case, then read below.

  I don't know how long you got in the installation until so chances are, you will need to run the CS4 Cleanup utility. 2 levels to run but do not use 1 or 2 just type number 3.

  http://www.Adobe.com/support/contact/cs4clean.html

  You may need to run the utility windows install cleanup too

  http://support.Microsoft.com/kb/290301

  Before you try to reinstall the software make sure that adobe reader is not installed. If it is delete. It has caused problems in the past with vista and CS4 installs.

  You can also disable windows Defender and all antivirus software. You can keep UAC Windows 7.

  When installing CS4 to 90 percent, it stops almost and may take 5 to 10 minutes at the end. It's normal. What a pain huh...

  After the installation is complete, restart

  After restarting, go to the icon of CS4 64-bit or 32-bit (depends on 32-bit or 64-bit Windows 7) in the starting area, right-click on CS4 64-bit (if you have windows 7 64 bit), and then choose Properties, Compatibility tab, and then check run as administrator at the lower part. Hit apply, ok to finish.

  Now, run CS4 and run the update.

• Double boot with Windows 8 and 7 Pro in a G6 - 2235us Notebook

  I have a G6 - laptop computer 2235us 64-bit included with Windows installed 8.0.
  I would like to install Windows 7 Pro and make double book with Windows 8.0 with 7 as the default to start.

  Please would you give me steps on how to proceed and also the drivers, etc., I would need to download.
  Thank you.

  You are the very welcome.

  Yes everything seems to make sense to me.

  Two suggestions...

  I would label the volume 8 of Windows and not Windows 8 Pro W8, since your laptop did not come with Windows 8 Pro.

  I believe that you can not temporarily disable secure boot.

  You should leave the setting to disabled, or you will not be able to boot in Windows 7.  Windows 7 is not compatible with secure startup.

  Or whenever you want to start in W7, you will need to first go into the BIOS and disable the secure startup parameter, restart and then select W7 to boot from, which would take a lot of unnecessary time, IMO.

  I don't know if it was me, I would leave all the parameter start secure off all the time.

  Subject to the comments preceding, I think it should work very well.

• Hello everyone, I just bought a Thunderbolt Apple display to use with my 2012 15 "27" Macbook Pro, Win10/Bootcamp. Is anyone know the procedure to get the display to work with Bootcamp Windows 10?  I have connected screen but no picture. TY

  Hi all

  I just bought a Thunderbolt Apple display to use with my 2012 15 "27" Macbook Pro Win10/Boot Camp running. Is anyone know the procedure to get the display to work with Bootcamp/Windows 10? Is there a setting in the training Camp that must be turned on to make it work? I have connected screen but could not get a desktop display.  Any help would be really appreciated! TY

  The monitor should have a TB and adapter power connector. The monitor works on both OSX. ? If so, shut down of windows, connect monitor and start Windows. Your TB 2012 monitor is not plug-and-play with Windows.

  Please see ports Thunderbolt and views: frequently asked questions (FAQ) - Apple Support .

  1. the "hot pluggable" Thunderbolt devices using Windows with Boot Camp?

  Thunderbolt hot plugging is supported under Windows 8 or 8.1 on all Macs from 2014 and later.

  For all other Mac computers, Windows 7, 8 and 8.1 scans and active them Thunderbolt devices connected to ports Thunderbolt during the Windows startup process. If your device has been plugged in not at startup, Windows detects not without a reboot.

• Need installation disk for Windows XP Edition family fo Compaq Presario S4020WM.

  Hello

  I'm running a Compaq Presario S4020WM and have Windows XP Professional (Service Pack 3) installed.  I got this computer as a gift and it came with this operating system.  The operating system is not a genuine copy of windows (he says it's a version of test on my desktop wallpaper).  The sticker on the computer, says that he supplied with Windows XP Edition original family.  I would like to reinstall Windows XP Home Edition on the computer, but I don't have the installation disc.  I contacted the web site of the window and chat with technical support.  They asked me to contact the manufacturer of the computer for my specific product key installation disc.  My product key is [personal information deleted], my product number is DK214A and the S/N is[personal information deleted].  I know I am not pleased under warranty, but I would be eternally grateful if you could send me the Installation disk for Windows Home Edition for this particular product key.  Thank you.

  Vidya has already pointed out, the HP recovery discs are available for purchase at the third-party provider ComputerSurgeons.com

  There is a direct link to order No. 5069 - 5087 - Windows XP Home SP1 recovery (33NAHERED4) - Compaq discs model S4020WM on the ComputerSurgeons Web site.

  Please send Bravo