Double IME devices?

Similar Questions

• Two devices in Vista on Satellite M100-222

  Under Windows XP, a playback device has been recognized for the laptop. Sound can be heard through the computer speakers portable or you could plug in headphones and hear the sound of their share.

  Under Windows VISTA, two reading devices or "High definition Audio Device" s are recognized. One of them, when the default is actually the speaker for laptop system. The other when the default value is actually the headphone plug system.

  In other words - it can not just pass from speakers to the headphones just plugging headphones into the socket. You must also not select the correct playback device, otherwise no sound. This is not good! Help, please!

  Hello

  Your post is a little confusing
  I installed Vista on my laptop (unfortunately it s not M100) and I don t needed any reading to hear the sound of the speakers or headphones.

  As far I can understand the Satellite M100 supports 2 microphones; built-ininternal mic and external microphone jack.
  But this has nothing to do with double Audio devices high definition

  The motherboard supports a good chip Realtek ALC861. Maybe an update of the driver from the Realtek site will help you.
  If it won't help I guess it's a feature of Vista on this device and it must deal

• USB device not recognized until restart

  Hello

  my notebook G61 110 SA fails to load the drivers for any device, including the Iphone 4, until I restart. I tried to uninstall all devices in Device Manager, and allowing windows 7 SP1 reload them, but it does not help. Any suggestions?

  Hi @Technotrousers,

  Welcome to the HP Forums!

  It's a great place to find answers.
  You have the best experience in the HP forum, I would like to draw your attention to the Guide of the HP Forums Learn how Post and more

  I take that for your USB is not recognize devices until you have rebooted your system. You have tried to uninstall and reinstall the drivers but no change.

  You would try as follows

  Go to the computer

  Right click and choose Manage

  Double-click Device Manager

  Click on the USB to expand

  Right-click on any hubs root and choose Properties

  Click the power management tab

  Uncheck allow the computer to turn off this device to save power.

  Repeat the above procedure for the remaining USB root hubs.

  Please let me know the results.

• Tecra M2 - how to get work touchpad?

  Hello

  Problems to get the touchpad to work on my Tecra M2. I downloaded and implemented the version ALPS Pointing-device Driver V6.0.303.4 for Windows XP, restarted my computer, and then the utility double pointing device. Nothing works.

  The launch of the detailed settings window buttons and start the easy setup wizard are not enabled after that I click on the icon for the device of Toshiba double score.

  I can't believe that he can be such a hassle to put in place a touchpad, when on other laptops, they work right out of the box.

  David

  Hello

  Try the driver for the touchpad for Tecra M3

  There is a newer version.

  I think that the pilot is missing, and therefore the touchpad does not work.
  The unknown device in Device Manager confirms my hypothesis

• Tecra S1 - Accupoint / mouse Touchpad has become crazy

  Hello

  I bought my Tecra S1 second hand about 2 years ago and it was working fine until I realized missed me the video card driver, once installed the cursor on the screen went weird, he kept by adhering to one side of the screen for a long time, I uninstalled the driver but nothing works She continued to do until I completely lost control of the mouse whenever I opened my laptop.

  Recently, I decided to reinstall Windows XP Home edition to see if it was a software problem (of any kind) but still the problem of cursor. I don't know how an installation simple driver on my laptop has created such a hassle. I I am convinced that it is not a hardware problem since any device of mouse I use (mouse, touchpad, accupoint) the nuisance persists.

  If anyone has any suggestions / solutions please let me know.

  Thank you

  PA

  Hello

  I have older Tecra M1 and I had this problem. AccuPointer was defective and after Exchange of keyboard, everything was OK again.
  Only thing you can do is to use an external mouse and disable the double pointing device in the properties of the mouse or by using the FN + F9 key combination. I did the same thing.

  Of course, the touchpad driver must be installed.

• Satellite P100-324: How can I enable shortcuts on the touchpad

  I have the Satellite P100-324.
  Modell Nr.: PSPA6E-02R01FGR

  I saw in the internet to a Web site that something really interested on a surface of touchpad. Here is the link http://forum.notebookreview.com/showthread.php?p=1362295
  But how to activate this feature? How can I activate my touchpad shortcuts?

  I would be really happy to help =)

  Hello

  I think you mean the function of easy capture.

  Something like that you can try to activate in the mouse settings in the control panel.
  Here, you have to choose the double pointing device.
  Then detailed-> TouchPad tab settings

  But first, we should know if your laptop supports this feature.
  Are you sure the model to support you 100%?

• Impossible to get the touchpad to work - Tecra M2

  I have unknown device in my device manager.

  Touchpad does not work but can use the usb mouse.

  ALPS Touch Pad driver and Toshiba double pointing device utility installed.

  It is a Tecra M2.

  David

  It is not necessary to create a second thread on the same topic.
  You must follow your first thread here:
  http://forums.computers.Toshiba-Europe.com/forums/message.jspa?MessageID=179662

• Tecra M2: Doe Touchpad not working after installing XP

  The touchpad does not work since doing a reinstall of Windows XP.
  We cannot find the recovery disk that came with it and we tried to download or install the drivers on the toshiba site and still no joy.

  Any suggestions?

  Thank you

  Hello

  Please see the page of the European driver Toshiba.
  All XP drivers need to be installed as mentioned in the installation instructions!

  To get the touchpad working, install first the double pointing device, and then the Alps Electric Touch Pad Driver

  Welcome them

• driver CD and dvd cannot recognize

  Well, if anyone can help me I'll apreciate... my loptop computer do not recognize cd and DVDs an i don't know how to reprogram...

  Hi el gallo 1,.

  Thanks for posting on the Microsoft answers Forums.

  Did you ensure that you have all the current drivers and updates for your system?

  To check that you have all the current updates follow the steps below:

  Click on the Start ORB

  In the Search box, type Windows Update

  Then this will open a new window and automatically check that there is no update is not installed on your system.

  Drivers for your CD/DVD drive:

  Click on the Start ORB

  Then right click on computer and select Manage

  In the management of the computer window double-click Device Manager

  And then select your CD-ROM/DVD-ROM drives by clicking once on the plus sign (+) next to her and then select your drive and right click and select Update driver software.

  After update your drivers to check if your CD-ROM/DVD-ROM drive will now be recognized.

  Please post back with the results of the above procedure so that we can help you if you're still having trouble accessing your CD-ROM/DVD-ROM drive.

  Robyn
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Optiarc BD ROM BC - 5500S does not work...

  My BD/CD/DVD drive does not work because Windows cannot load the driver software. I had the computer since November and I had not had any problems since mid-February. I already tried unistalling the driver and then replace that did nothing. I tried to delete upper and lower filters that do not work also, and I tried to reset the settings of the BIOS which once was unsuccessful. The only thing that worked was restore my system to a previous point of update in which case it worked, but the next day it did not work. I would like to restore my system again, but because of the space(300mb) limited of restore points update that I can't go far enough once again to a point before this problem. This was incredibly frustrating and completely fault of windows because of the Automatic Updates installs. A solution would be much appreciated.
  Austin

  Hi hollywoodskool,

  Thanks for posting on the Microsoft answers Forums.

  Please run a SFC scan on your computer, then the post back for us to share the results.

  To run the System File Checker tool, follow these steps:

  1. click on Startand type cmd in the area to start the search.

  2 right-click cmd in the programs list, and then click Run as administrator. If you are prompted for an administrator password or a confirmation, type your password or click continue

  3. at the command prompt, type the following line and press on ENTRY:

  sfc/scannow

  To check that you have all the current updates follow the steps below:

  Click on the Start ORB

  In the Search box, type Windows Update

  Then this will open a new window and automatically check that there is no update is not installed on your system.

  Drivers for your CD/DVD drive:

  Click on the Start ORB

  Then right click on computer and select Manage

  In the management of the computer window double-click Device Manager

  And then select your CD-ROM/DVD-ROM drives by clicking once on the plus sign (+) next to her and then select your drive and right click and select Update driver software.

  After update your drivers to check if your CD-ROM/DVD-ROM drive will now be recognized.

  Please post back with the results of the above procedure so that we can help you if you're still having trouble accessing your CD-ROM/DVD-ROM drive.

  Robyn
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• How to make the printer deskjet 3940 compatible with Windows 7 Home Basic, 32-bit?

  I have the HP Deskjet 3940 printer. I recently bought a Lenovo (C320, 57-302429) desktop computer that has Windows 7 home basic, 32-bit operating system. The said printer does not work with the computer above. Please guide how to make this printer compatible with the operating system above.

  1. click on the Start button, select Control Panel and double-click devices and printers.

  2. click on Add a printer.

  3. Select Add a local printer.

  4. Select an existing Local USBx port, click Next.

  5. click on the Windows Update button.

  6. once the update is complete, locate the 3940 driver.

  7. click on Next,Next,Next,Next,Finish

• Can't install/uninstall Microsoft mouse and keyboard Center!

  Hi, I got problem with the Microsoft Mouse and keyboard Centre because he doesn't identify my touch mouse correctly (classified as a HID-compliant device and not by its name as my Sidewinder X 4 keyboard). I uninstalled from Add/Remove Programs, and I also uninstalled the drivers for my mouse AND my keyboard (because it showed a double receiver device in device manager). I restarted my computer, but when I tried to install the drivers again in the process of installing mouse and keyboard I got an error message telling me that it was already installed. I uninstalled it again (the "ghost" of it is still listed in Add/Remove Programs) and restarted. When I tried to reinstall, I got the message again who told me that it was already installed. This is when strange things began to happen. The program was once again listed in Add/Remove Programs (this time with its icon and not only a "ghost"). I tried uninstalling and received a message telling me that the uninstall process could not be met because some the original installation files have been corrupted or missing. But now, the program has been listed in the Windows Start menu and when I double click it it started an installation process ceased to immediately resume a message that mkc.msi was missing from a temporary file to My Documents, and he could not proceed, so now I can't install or uninstall the cursed thing. I tried to restore my computer but it doesn't solve all problems. I suspect that some registry entries are not deleted properly when the first uninstall process. I don't want to mess with the registry by myself, at least not until I know what registry entries are created by and in connection with the program. Any help would be appreciated.

  Thanks in advance

  Hello spmisik,

  Thank you for the question!

  I'm sorry to know that have problems you with Microsoft Center of mouse and keyboard. As I understand well you can't install/uninstall Microsoft Mouse and keyboard Center.

  I need to ask you some questions to help you best.

  1. the problem persists with a particular application?

  2. were there any changes (hardware or software) to the computer before the show?

  Run the fixit and check.

  Solve problems with programs that cannot be installed or uninstalled

  Answer to us if you are having problems with Microsoft Mouse and keyboard Center or any other issue of Windows, and I'd be happy to help you again and try to correct the problem as soon as possible.

  Good day!

  Hope this information helps.

• Error message: no avialable pen or touchscreen and touchscreen Nuvoton HID does not work since the reinstallation of Windows 7.

  Original title: Nuvoton HID touch screen

  My touch Nuvoton HID never works since I re.installed windows 7 on it, drivers has been installed and updated but it still says that there is no stylus avialable or tactile please help it would be greatly appreciated please!

  Hi Alice sincere.

  What is the full error message that you receive?

  You can try the following steps and check if it helps:

  Method 1:

  You can try to run the hardware troubleshooter and check if it helps.

  Convenience hardware store

  Method 2:

  You can try the following steps and check if it helps:

  a. click Start, type "devmgmt.msc"(without quotes) to start search, and then press ENTER.

  b. Select and open the Device Manager.

  c. you should be able to find this device under devices to Interface or mouse and other pointing devices.

  Note: You will be able to find this device only if the device is connected to the computer.

  If you get an error that says no. Pen or press enter is available for this display and the device is connected, you may need to update the drivers for this device.

  d. double-click device and click the driver tab and try to update the device.

  For more information, see the articles:

  Updated a hardware driver that is not working properly

  Update drivers: recommended links

  You can also get in touch with Nuvoton support to update the latest version of the driver:

  http://www.Nuvoton.com/HQ/ENU/ProductAndSales/ProductLines/ComputerIC/pages/default.aspx

  Also see the articles:

  Using touch gestures

  Improvements in Tablet PC

• What happened to my browser?

  I connected to a double by devices screen, and after that I reconnected it on PC only, my google chrome does not open. I tried to uninstall, but it will not uninstall b/c its asking me to close the programs open in it, but I can't close because I can't open the browser. I tried to do what was suggested with firewall and cut for a minute and then turn it on, and who does not. I tried opening through the start page, without success. Basically, I can't open google chrome at all, and I can't do anything to restore. The "devices" has been lacking in the second screen with a message saying that "nothing can be sent from the office." Outsourced agent stated that windows by default automatically to the second screen even if it is set on the screen of the pc, which seems odd. Everything was very well with google chrome wrkng until I put the second screen devices. I actually never connected to a second screen for my tv does not support the technology. everything works fine... Explorer, all my other programs etc. Any ideas on how to restore google chrome? Can't talk to anyone, irritable, and none of the help support chrome seems to work with this problem.

  Thank you stephanie,.

  I had repaired the problem last night before I read this. I restarted my computer, what I should have done immediately, but do not think that would solve the problem. After the reboot, I was able to uninstall and reinstall. The good thing is saved chrome all my favorites! Happy about it. Everything seems to be in order now. Thanks for your response! If it happens again, I will return to this.

• double taken sim card device supported?

  Hello, want to try firefox OS and looking for a device of double SIM supported. Should have the good audio quality display. It's a phone so I want good quality call!

  In addition, LTE is preferable but not required.

  Thank you!

  P.S. I don't see not all dual-sim at https://www.mozilla.org/en-US/firefox/os/devices/

  Hello

  the only Firefox OS with dual SIM device I can think of is the flame:

  https://developer.Mozilla.org/en-us/Firefox_OS/Developer_phone_guide/flame

  https://blog.Mozilla.org/press/2014/02/developer-momentum-2/

  http://www.Everbuying.com/product549652.html

  Beware, however, that he is a developer phone, not as a commercial device, so there probably features that you are not interested and other deficiencies that you may be looking for. In particular, it does not have LTE (and I don't know anything about the quality of the screen and call).