Download itunes 9.0.2 on a 32-bit vista machine

Similar Questions

• How can I download itunes and quicktime for windows 7 (64 bit)

  I'm trying to download the most recent, or any other version of itunes on my PC which has Windows 7 (64-bit).  I don't have Quicktime and looking to download or install Itunes or each, quicktime and itunes, separately (everything is better and market).

  The problem is that my PC with Windows 7 is 64-bit and I can't find the right version/s download.

  Facts: firstly - I downloaded itunes and received an error that I need to download QuickTime, then I downloaded quicktime with itunes and and received an error message that qtime was for 32 not 64 bit and I need the 64-bit version.  I can't find the combo of the two download requests or quicktime on its own compatible for windows 7 64 bit.

  Help, please...

  You can find good download here:http://www.apple.com/itunes/download/ you want to check the box at the bottom (64-bit) (circle).

  iTunes and Quicktime are installed as part of the same package.

• Install Itunes 10.0 on 64 bit Vista machine

  Whenever I tried to install Itunes 9.0 or higher on my HP Vista 64 bit computer, I get the error now.

  

  0

  Also useful vote

  The error reads as follows:

  An error occurred during the installation of Assembly
  ' Microsoft.VC80.CRT, version = "8.0.50727.4053", type =
  "win32", publicKeyToken = "1fc8b3b91e183b", process
  orArchitecture = 'x 86' '. Please refer to help and support the
  For more information. HRESULT: 0X800736FD.

  I called Apple and they say it's a problem of Microsoft. Did somebody solve this problem?

  Hello

  Try the solution below who has worked for many people with this issue:

  Look at the post: http://social.answers.microsoft.com/Forums/en-US/w7programs/thread/1099136a-03df-4da4-966c-5a4e56b8f202

  This is the user puntxo:

  Check if the 'Windows Modules Installer' service is started. If this is not the case, try to start from the services console. If you receive an error "not enough system resources to 1450", then follow these steps:

  (1) Open regedit and change the following value:

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control

  Key: RegistrySizeLimit

  Type: REG_DWORD

  Value: 0xFFFFFF (4294967295)

  (2) restart

  (3) open an administrator command prompt and run SFC/scannow to verify the integrity of the modules of the system.

  (4) install the windows updates pending

  Please let us know if that helps.

  Sincerely,

  Marilyn
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• Can't download iTunes 12.3.2 for Windows (64-bit)

  Hi guys,.

  This is my case; -.

  (1) I have "Reset content and settings" my iphone 6 iOS 9.2.1, then tried to restore to my last backup in my Itunes.

  (2) after the reset, pluged into my laptop makes itunes error shown "cannot use this iphone because it requires a newer version of itunes."

  (3) check the update in my itunes it showed the latest version (12.1.2) while the site is 12.3.2 iTunes for Windows (64-bit), then I downloaded it.

  4) now after downloading and is ready to run, my illustrated window "this app can run on your pc. My OS is windows 10 pro 64-bit.

  (5) I met it could be due to my security software, I uninstalled it.

  (6) even *, I can't update.

  (7) try to repair the Apple Software Update but still pop error "path C;\users\kenvy\AppData\local\temp\ixp.tmp\AppleSoftwareUpdate.msi" was not found, make sure you have access to this location and try again or try to find the installation package "AppleSoftwareUpdate.msi' in a folder from which you can install the product Apple Software Update.

  can you help me, I need to restore my phone to the last backup I did.

  For general advice, see troubleshooting problems with iTunes for Windows updates.

  Start by missing error MSI.

  The steps described in the second case are a guide to remove everything related to iTunes and then rebuild what is often a good starting point, unless the symptoms indicate a more specific approach.

  Review the other boxes and other support documents list to the bottom of the page, in case one of them applies.

  More information area has direct links with the current and recent buildings if you have problems to download, must revert to an older version or want to try the version of iTunes for Windows (64-bit-for old video cards) as a workaround for problems with installation or operation, or compatibility with QuickTime software or a third party.

  Backups of your library and device should be affected by these measures but there are links to backup and recovery advice there.

  TT2

• On Win 7 after update itunes Error Message error 7 (Windows error 127) whenever I have start download iTunes

  On Win 7 after update itunes Error Message error 7 (Windows error 127) whenever I have start download iTunes

  HI MikeGeorgen,

  I understand that you have updated iTunes on your Windows 7 computer, but now you see an error when you try to open it. I know it's important to have iTunes working properly, so you can sync your device, so I'm happy to help you.

  Make sure that you logged in as an administrator on your computer, and that you have the latest Windows updates. Then check out the additional troubleshooting steps that are listed here:

  Remove and reinstall iTunes and the components of the software for Windows 7 and later versions

  Thank you for using communities Support from Apple. See you soon!

• Download iTunes for Windows 10

  I am trying to download iTunes for Windows 10 and get these two messages:

  The feature you are trying to use is on a network unavailable resource.

  And...

  Cannot remove the older version of iTunes. Contact your technical support group.

  Can someone please help?

  Kind regards

  Fred.

  Take a look at this trick of CSA provided by the user to help with iTunes and Windows troubleshooting. Take the time to read through the tip of all, and then follow the instructions to your problem. Troubleshooting problems with iTunes for Windows updates

  Turingtest2 has compiled the most comprehensive list of iTunes and Windows troubleshooting tips. You should be able to get your problem fixed with this tip sheet.

• What happens if the PC I just downloaded Itunes on & connected to, does it display not all devices?

  What happens if the PC I just downloaded Itunes on & connected to, does it display not all devices?

  Hello 2sealadies!

  Thank you for joining the communities Support from Apple! Looks like you have a problem with your iTuens on Windows 10 not to recognize your iPhone. I know how important it is that the iPhone is recognized by iTunes. Read this article with steps If iTunes does not your iPad, iPhone or iPod. Specifically, after the first series of measures:

  If you are using a Windows PC

  1. Open Device Manager by following the steps for the version of Windows that you have:
     • Windows 10: Click the search box in the lower left corner, type Device Manager and press ENTER. In the list under Bus USB controllers, find the Apple Mobile Device USB Driver.
     • Windows 8: loose in the right edge of the screen. Press search and enter the Manager devices, and then click Device Manager. If requested, enter your password. In the list under Bus USB controllers, find the Apple Mobile Device USB Driver.
     • Windows 7: click on > Control Panel > system and Maintenance > Device Manager. If requested, enter your password. In the list under Bus USB controllers, find the Apple Mobile Device USB Driver.
  2. Even if you do not find the Apple driver, follow the steps below, based on what you see or don't see.

  The pilot and
  No symbols

  A down arrow
  by the driver

  Exclamation or
  question mark by
  the pilot

  No Apple Mobile
  USB device driver

  You don't see symbols next to the Apple Mobile Device USB Driver

  If you do not see , , or of the Apple Mobile Device USB Driver, look for third-party software conflicts. Then if you still need help, restart your Apple Mobile Device Service or contact Apple technical support.

  

  You see an arrow down

  If you see next to the Apple Mobile Device USB Driver, the driver with the right mouse button and choose enable from the context menu. Then if you still need help, contact contact Apple technical support.

  

  You see an exclamation point or question mark

  If you see or the Apple Mobile Device USB Driver, right click on the entry, then manually update the Apple Mobile Device USB driver.

  

  You do not see the Apple Mobile Device USB Driver

  1. Disconnect your device from your computer.
  2. Save a screenshot by pressing the Home button and sleep/wake button of the device button at the same time. The screen should Flash briefly.
  3. Reconnect your device to your computer.
  4. If you see one of these sections in the Device Manager, expand them:
     • Imaging devices
     • Other devices
     • Portable devices
     • USB Bus controllers

  Now, locate the entry that recognizes the device as a camera. You should see 'Apple IPhone', 'Apple iPad' or 'Apple iPod '. Right-click the device entry, and then manually update the Apple Mobile Device USB driver.

  If a single unknown device appears, follow these steps:

  1. Right click on the unknown device entry.
  2. Choose Properties from the context menu, and then click the Details tab.
  3. In the drop-down menu, select hardware IDS.
  4. If the ID begins with something other than USB\VID_0000 & PID_0000, go into the Device Manager and right click on the entry for device unknown, and then manually update the Apple Mobile Device USB driver.
  5. If the ID begins with USB\VID_0000 & PID_0000, then follow the remaining steps.
  6. Unplug the unit and remove all the USB devices on the computer.
  7. Shut down the computer, and then turn it back on.
  8. Reconnect the device, tests of each USB port for about 30 seconds to see if the device is recognized.
  9. Test with a different, checked 30-pins-USB or the lightning-connector-cable-USB, if they are available.

  If you still need help, contact Apple technical support.

  

  Manually update the Apple Mobile Device USB driver

  If one of the sections above directs you to this section, you should already have right click on an entry in the Device Manager. Now, follow these steps:

  1. Choose update driver software.
  2. Choose "Browse my computer for driver software."
  3. Choose "Let Me pick from a list of drivers for devices on my computer.
  
  
• Click the disk button. If this is not available, choose a category of devices such as Mobile phone or storage device, if in the list.
• Click Next. You should see the disk button.
• Click Browse and navigate to C:\Program Files\Common Apple Mobile Device Support\Drivers.
• Double-click the file "usbaapl. If you have a 64-bit version of Windows, this file will be called "usbaapl64". If you do not see here "usbaapl64" is not a Drivers folder, look in C:\Program Files (x 86) \Common Files\Apple\Mobile Device Support\Drivers.
• In the disc window, click Open, and then click Next and then click Finish.
• Windows installs the driver. If a message indicates that the software that you install "not passed the Windows Logo test", click on continue. You can get help with other common errors and the error code numbers in this Microsoft article.
• Open iTunes to make sure that iTunes recognizes your device. If not, Restart the Apple Mobile Device Service.

See you soon!

• When I download itunes on my pc, I get an error of analysis package, any help?

  "When I download itunes on my pc I get a parse error in the package, any help?

  Hello xlAdrenaline,

  Thank you for using communities of Apple Support.

  If I understand your message that you receive a packet parse error when you try to install iTunes on your Windows PC. The following article has some great not to help solve this type of problem:

  If you see an error message "Windows package install" when you try to uninstall iTunes from your PC

  Best regards

• How the prisma app works on mac after downloading itunes

  How the prisma app works on mac after downloading itunes

  I don't think they have a Mac version. The following a https://itunes.apple.com/us/app/prisma-art-photo-editor-free/id1122649984?mt=8 present in the compatibility section in the left column that it is compatible with iPhone, iPad and iPod Touch. Applications you download through iTunes to a Mac would be then be synchronized the Mac one of these devices.

  Store applications designed for the Mac can be downloaded from the Mac App via the Apple menu > App Store and iTunes is not involved.

• Download iTunes

  I am trying to download iTunes 12.4.3 (64-bit) on my new laptop with Windows 10 Home; but receive an error message "this application can run on your PC; to find a version of your PC, check with the software publisher"

  

  Make sure that Windows is perfectly up to date. Download the right version of this link.

  TT2

• will not download Itunes using Windows 10

  whenever I try to download and install iTunes, I get a message saying thanks for the installation but it never downloads or installs iTunes. I had problems with iTunes, then I uninstalled later I went to apple.com and I can't for the life of me to download or install iTunes.

  Check and sure for a complete uninstall of itunes from your pc. ThenTry download itunes, if the same problem recurs, try after some time.

• Download iTunes to recognize my iPhone 6 times out of 10 Windows.

  I use iExplorer to backup my iPhone 6.  When I was a little cleaning up files via Panel control WIndows 10 I deleted iTunes on my PC because I never use it. (I did not remove a file or a program that did not have a name that I recognized as an application I installed, but no longer use.  If I had doubts, I did not hit delete.)

  After I deleted iTunes iExplorer would not see my phone, I found. It turns out that iExplorer using iTunes. So I downloaded and reinstalled the 64-bit version of iTunes for Windows 10.  (iExplore said if your phone is not recognized, verify that it is recognized in iTunes first. So I've been focused on fulfilling that.)

  I'm sure that iTunes is updated.  I've updated the iOS on my iPhone 6. I made 10 Windows is updated. When I plug my iPhone on my PC using a USB cable, the computer asks me if I know the PC and let him access to my iPhone. So I know that the phone is recognized by the PC through the cable.  But when I go to iTunes and pull down the FILE menu and select DEVICES, everything is gray.  I tried the update level, reboot, reboot and connect it in different orders, using different USB cables, using different USB ports on my HP PC Envy.  iTunes will not see my iPhone as it was when I bought my Windows 10 PC.

  Today, someone suggested that I try another PC.  Then at work, I downloaded iTunes on my Windows 7 PC. Once it was installed I plugged my iPhone with a USB cable.  iTunes recognized my phone without problem.

  Then I came home and uninstalled iTune.  Then I downloaded a new copy and reinstalled.  He still does not recognize my phone.

  What Miss me?

  Did you just use Control Panel to remove iTunes? If so, you did not uninstall completely. See this support document for instructions on how to remove and reinstall iTunes properly. Remove and reinstall iTunes and the components of the software for Windows 7 and later versions - Apple Support

  If that's not enough, then see this document of support for the other steps to download iTunes recognizes your device troubleshooting. If iTunes does not your iPad, iPhone or iPod - Apple Support

• Where can I download itunes for Linux OS Ubuntu?

  Where can I download itunes for Linux OS Ubuntu?

  There is not an iTunes for Linux OS

• Can't download iTunes on Windows 10?

  Hello

  I was wondering anyone could help me please? I have 10 windows and recently bought Office 2016. I am trying to download iTunes and much failed several times! He repeats to me 'Apple Application Support was not found. Apple Application Support is necessary for the performance of iTunes. Please uninstall iTunes and then reinstall iTunes. error "error windows 2". I reinstalled many times and watched a you tube video where does not download u WinRAR but still. My iPhone 5s is also not recognized? I uninstalled my antivirus as well and I've checked that I am the administrator just incase, but did not work then I would be really grateful for the help. Thank you very much.

  There are to many sites around that provide incomplete iTunes downloads. Use this link direct Apple.

  http://www.Apple.com/iTunes/download/

  If you are still having problems installing, delete first of all personnel related Apple and iTunes.

• I downloaded iTunes on a new laptop computer and he allowed. First of a süden, I can't sync my iPhone 6. What can I do?

  I downloaded iTunes on a new laptop computer and he allowed. All of a sudden, I can't sync my iPhone 6. What can I do?

  If your iOS device does not appear in iTunes, try the following:

  1. Open Control Panel > Device Manager
  2. Plug in your device
  3. Locate Bus USB Controllers > Apple Mobile Device USB Driver.
     It is also possible that the device may appear under imaging devices, portable devices or other devices or as a device USB of MTB.
     
  4. Right-click and select software update of the driver...
  5. Click Browse my computer for driver software
  6. Go to C:\Program Files\Common Apple Mobile Device Support\Drivers or
     C:\Program Files (x 86) \Common Files\Apple\Mobile Device Support\Drivers
  7. Click on let me pick from a list of drivers for devices on my computer
  8. Click on Apple Mobile Device USB Driver
  9. Click Next, then close and exit the Device Manager

  To step 3 above, open the Device Manager. Expand one of the articles that are listed.

  • USB Bus controllers
  • Imaging devices
  • Portable devices
  • Other devices

  Plug in the appliance. You should hear the telltale Windows sound device connection and a Division must acquire a new entry. This should be your device. It cannot be labelled properly at this point. If you do not hear a suspicious noise cable damaged.

  Or try If iTunes does not your iPad, iPhone or iPod - Apple Support Apple version of the above opinion.

  If not try a complete tear down and rebuild iTunes in accordance with the resolution of the problems with iTunes for Windows updates. 64-bit users might also try the build replacing iTunes for Windows (64-bit-for older video cards) which is sometimes a useful workaround.

  Or try to go back to the last version of iTunes that has worked for you. See the programs installation of iTunes to download links. If you roll back to 12.4.0.119 to 12.3.3.17 or 12.3.2.35, for example, then you will also need restore the database of the library in the manner described in the empty/corrupted after upgrade/crash iTunes library. The tip makes suggestions to reintroduce recent purchases, so at worst, you lose a few meters or a newly created playlist.

  TT2