Download machine virtual ESX of ESX1 and copy to ESX2.

Similar Questions

• Weird question on which the machine virtual ESX 3.5i

  Hello world

  I have a question very very weird on 2 x HP DL380 G5 boxes with ESX 3.5i U3 loaded on each.

  The installation program:

  DL380 G5

  2 x Quad core

  2 x 72 GB Raid 1 + 0

  6 x 146 GB Raid5

  32 GB OF RAM

  I installed esx 3.5i u3 according to the normal, created vm. But when I copy data to a network in the virtual machine folder spikes the cpu and the virtual machine does not respond. What makes it worse, is if I copy a large file on the c: to another folder on c: VM does not - high cpu and ping meets about 200ms. vmdk bones all over the 72 GB Raid 1 + 0 datastore. When I add a data from the store of raid5 data drive the same phenomenon occurs. If I copy the c to this drive on the raid 5 data store the virtual machine gets does not and pings hover at about 200ms.

  Any ideas?

  I have no idea why this is happening, Ive deployed the same configuration with a bunch of vm and no problem.

  I don't think its network since you said that you have the same problem copy from c: to c: on the same machine.

  Looks like the machine is waiting for e/s finish. Check if you can see if I/O is blocked somewhere

  Are there messages in the system log of Windows indicating disk problems?

  Check your RAID controller. It is on the HCL?

  Your write cache is configured correctly?

  Arnim - van Lieshout

  -

• From machines virtual ESX 3.5 to 4.0 help

  I need to move virtual machines that reside on a box of ESX 3.5 and put on a case of ESX 4.0 currently.  Virtual machines live on the network so SAN is just as easy to move files to a SAN to another?   Or is it also a process of upgrading involved?    Thanks for the help.

  If you just move the virtual machines to another host SAN and ESX 4 they will run. However, it would be nicer if also upgrade you the hardware of the VMS to version 7 and also upgrade the VMware tools. Do not forget that after upgrading hardware to virtual machines to version 7, you will not be able to bring back the virtual machines on an ESX 3.5 host.

  Best regards, Robert

• How to leave machine machine virtual ESX v3.5 for Vsphere v4.1?

  Hello

  I would like our VMS ESX v3.5 to a new VShere v4.1.

  Virtual machines are Windows 2003, RedHat 4 and 5.

  I wouldn't have any impact on the machine esource th.

  Methods:

  (1) stop the virtual machines, copy the folder with vmdk from the old data to the new store data + Start new store + install the new VmWare Tols

  OR

  (2) use the Option migrate (change the host + Datastore), works for the RedtHat Machines

  Thanks for the reply

  Welcome to the Forums - both will work but I use cold migrate method change of host and the data store.

  If you have found this device or any other answer useful please consider awarding points.

• SQL 2005 Ent on machine virtual ESX 3.5

  I built a Windows Server 2003 Enterprise VM inside VMware (ESX Server 3.5 Update 3) host. We have Celerra NS20 Unifided EMC storage, which is where the server VM using different LUN. Does anyone have recommendations on installation of SQL 2005 Enterprise on a given server to Win2k3 VM, with regard to the way in which it must be installed in order to get the best performance and reliability... I'm looking for suggestions as SQL must be installed on the drive main hard and stored on a different LUN or SQL databases must be installed on a different LUN of the operating system? I intend setting up a LUN specifically for newspapers, so to keep separated from traffic, but wonder about the base installation of SQL and databases...

  Thanks for any advise you might have.

  It is a big question.  Here are a few things I do in this case...

  • Do not install anything - even the binary SQL on C

  • Prune/use a VMFS RAID5 for the SQL programs and databases on a volume

  • Want/use a VMFS RAID1 for newspapers

  There are 2 important things here.  One is that you have isolated the OS - DB and registers all logical drives different worms.  It is very nice to be able to make a hot grow of these disks

  The other is more for performance.  It depends on how transactional (how'RE Ops / s) the system will be.  In most cases, you should be able to have the other VM to share these same volumes, but changing the RAID level can provide a performance gain based on how the data are accessible.

  I don't know if it would be necessary to isolate a VMFS LUNS () set to the SQL database for a virtual machine.  It is a function of your SAN infrastructure and how hard the VM SQL is hit.

  We have several virtual machines with DB on the same LUN, and so far it hasn't appeared to cause problems.  You can always start with a more conservative approach and slowly add that you feel comfortable.

• How can I share a unique ROW between several machines virtual ESX 4.0?

  Hi all

  How can I leave the two virtual machine see the same SAN LUNS (how can I share same LUNS between two virtual machines).

  Thank you

  Welcome to the Forums - try you two virtual machines in the cluster? If you are this should help - http://www.vmware.com/pdf/vsphere4/r41/vsp_41_mscs.pdf. If you're looking to share a data store I relate to one of the virtual machines and then either through creating CIFS share if they are windows machines or a NFS if Linux

  If you find this or any other answer useful please consider awarding points marking the answer correct or useful

• Recommendations for his new laptop of VMware Workstation 7 run machines virtual esx

  I'm about to buy a new laptop and I'm looking for something that is reasonably priced and that will be able to help me study for the new vcp tests by installing esx4 inside the workstation.

  If you know any good portable that won't break the Bank that will work for sure for this, I would really appreciate your advice.

  Thanks for your help.

  I have the p9600 (2.66 GHz with 6 MB of cache) in mine.  You can just call and order and ask anything you want.  Sometimes (as in my case) they will have processors that are not yet listed yet.  I think the max is just at 3 GHz.  I usually run 3 VMs at a time, or I'll run my team (4 virtual machines) and another 1 or 2 with them.  I used for my RHCT practice stuff and it will use for my VCP and MCITP Enterprise Administrator practice as well.  I had with Vista x 64, but put Windows 7 Ultimate x 64 on it when he came in (MSDN).

• Downloaded Firefox 20.0 and copied to Applicationsbut, it always opens in the old version 8.0

  I downloaded the Firefox 20.0 version and copied the download file by choosing to replace the old version of the Applications, then restarted my mac.
  Now, I think I have the version 8.0 and 20.0 and when I click on the firefox icon (one global tour) he chooses the older version clearly the new download has not replaced the old a.

  How can I sort this please.

  Thank you

  Hi julie, it means that you have two firefox icons? If so, you can remove one.

• Get the list of virtual machines on an ESX host specific and dumping of .csv in a specific format

  I have problems to find a way to get a list of virtual machines on an ESX host specific and then he dumped to a .csv in the following format

  I use the get-vmhost esxhostname | Get - vm

  but everyhting else after, it is where I am lost...  I think the closest I had been posting the output with a goofy header and format 'vm1, vm2, vm3 "...

  name

  computer 1 name

  computer 2 name

  name of the machine 3

  to use for later use.  Any help would be appreciated.

  You must use the Select-Object cmdlet to specify more precisely the properties you want.

  The Export-Csv doesn't know how to manage the virtual computer object.

  Something like that

  Get-vmhost esxhostname | Get - vm | Select name. Export Csv.\report.csv - NoTypeInformation - UseCulture

• file-download webutil on WINDOWS 7 client and SUN virtual machine libraries

  downloads webutil client libraries on WINDOWS 7 and virtual SUN machine
  
  -------------------------------------------------------------------------------
  env is:
  Windows 7 Client company
  THAT IS TO SAY 8 / FF 4
  
  WebUtil Version 1.0.6
  Forms-Applet version: 10.1.2.0
  MACHINE virtual Sun 6_24
  
  -------------------------------------------------------------------------------
  The appserver downloads webutil libraries such as jacob.dll, myownapp.dll
  customers to C:\Program Files (x 86) \Java\jre6\bin\
  
  After open all windows access rights in this folder
  and put OFF user account control
  It works well.
  
  -------------------------------------------------------------------------------
  but to open all the level of security on this issue seems is not a good idea
  and I don't know what is, when change or update the sourcen java on the client.
  I may have to reopen this rights to this folder.
  
  ---------------------------------------------------------------------------------
  on change webutil.cfg and restart AS with ACE
  
  install.syslib.Location.client.0 = C:\temp\webutil
  
  but no change, webutil - dll where to download to C:\Program Files (x 86) \Java\jre6\bin\
  
  How can I tell webutil to use a separate folder on the client to download and access the webutil dll?
  
  concerning

  Forms 10.1.2.0 is not supported for use on Windows 7. You must patch 10.1.2.3 so that it works correctly. In addition, the "install.syslib.location.client.x" parameter is only available after you have patched for 10.1.2.3 and then applied a patch later, known as the patch Bundle of forms.

  Refer to MyOracleSupport notes 460886.1 and 1188127.1

• Transfer a Virtual Machine in Esx 2.5 to an ESX 4.1

  Hi all

  For a client, I need to transfer 3 virtual machines on an ESX 2.5 in stand-alone mode (local storage / VMFS2) for a new ESX 4.1 (local storage / VMFS3)

  I'm looking for a solution but without success. I see two ways to to do, but I can't test it before the migration, so could you give me your advice.

  (1) I copy all virtual machines in ESX 2.5 to the new storage to ESX 4.1 with scp.

  I create the virtual machine with the vmdk

  I put the last VmTools

  Upgrade virtual hardware

  (2) I have try the VmConverter username but I don'k know if he recognizes the VM Esx 2.5

  Is there another solution?

  Thanks for your help!

  Kind regards

  Franck

  the best solution in my opnion is with converter http://downloads.vmware.com/d/info/datacenter_downloads/vmware_vcenter_converter_standalone/4_0?hl=pt-BR&sourceid=gd&rlz=1Q1GGLD_pt-BRBR411BR412

  After the conversion to put vmware tools and after upgrade virtual HW.

  Verification procedure «how improve HW» virtual

  http://KB.VMware.com/selfservice/microsites/search.do?language=en_US&cmd=displayKC&externalID=1010675

  Please, do not forget the points of call of the "useful" or "correct" answers

  Mauro Bonder - moderator

• Problem machine network virtual ESX 3.5 x 64

  I have

  created a VM of Hardy Ubuntu 64 bit for a svn server to replace an old one

  that is a failure. I have it configured and running on VMware

  Workstation 6.5 with a static IP address. When I downloaded to Virtual Center as

  an ESX 3.5 64-bit VM using VMware Converter 3.03on my C7000 blade system, it completed without error, but I could connect is no longer

  to it.

  I went with the Virtual Console of the Infrastructer and can access the server. When I run

  It shows only L0 ifconfig. Eth0 is not there. But when I look

  / etc/Networks/interfaces it is there with the correct information. I have

  have restarted the network and restarted even drank the same thing.

  I am pretty new to Linux, but have a pretty good idea of the basics but

  That stopped me. Any ideas on why eth0 does not go up? I have

  about 60 other virtual machines running on the blades, a mix of MS and different

  Linux, flavors and did not run in the whole of this problem before.

  I'll try and find the thread that explains this, but I use this script to reset the network setting and restart the virtual machine.

  Edit: this thread deals with questions: http://communities.vmware.com/message/768291#768291

  Basically, I think that the conversion process changes the mac address and puts the networking on eth1 to eth0. There are a few corrections to it and the one I use is just to restore the networking with the script.

  My environment can be different from the way that you set up your virtual machines as my virtual machines are not set static IP they are set to DHCP - they acquire a static IP address of a router.

  If it's not quite what you are looking for there are other things in the thread I posted that might also help you...

  Whenever I use a converter on a computer or ESXi virtual on my Ubuntu VM, I get the same things happen...

• Cannot run Virtual ESX host configured in my Asus u56e laptop machine. Says Intel Vtx unsupported...

  Friends,

  I can't run Virtual ESX host configured in my Asus u56e laptop machine. Explains Intel Vtx unsupported.

  I checked to find that my machine has Intel VT turned on in the Bios.

  Please notify. I tried to use VMware-guest64check - 5.5.0 - 18463 tool and it said that my machine can support 64 bit OS. Fixing of newspapers.

  In my computer, open your VM ESXi and go to VM-> settings.  Under processors, check the box next to 'Virtualiser Intel VT-x/EPT or AMD-V/IVR.'

• This virtual machine may have been moved or copied during the priming two different Macs from the external SSD drive

  I am using this SSD external boot drive to start two different iMacs at work and home, making all my stuff to update this SSD.

  However, when I open the virtual machine in Mac OS X Server 10.6.8 (Snow Leopard) on VMware Fusion on OS X 10.8.3 5.0.3 (Cougar) installed on startup such external SSD disk, VMware asks what follows by trying to open the virtual machine on the FIRST Mac:

  "This virtual machine may have been moved or copied. In addition, I saw:

  Q.) VMware tells me: "this virtual machine may have been moved or copied. What should I do?

  VulnHub - Frequently asked Questions

  Choose "I moved it", or "I copied it"?

  Is it possible to PREVENT VMware Fusion ASKING such question with each single switch to Mac (as said, I always start the two Macs at work and home from the same SSD drive)?

  Thank you.

  VirtualMac2009 wrote: WoodyZ, the "Mac OS X Server 10.6 64 - bit.vmx" has a lot of lines. I understand that I should just stick

  UUID.action = 'keep '.

  the last line and save. Right?

  The order of placement of the options in the .vmx configuration file are not relevant as long as each is on its own line.

  On the other hand, I hope than boot from SSD external drive to start two different Macs (one at work and one at home) will not break she like says dlhotka.

  The main issue will be the differences between the CPU and according to what difference, say a Core 2 Duo vs Quad Core this by itself may be sufficient to trigger WPA on a Windows Virtual Machine.   Like many a Client in Mac OS X or OS X Client that shouldn't be a problem however with Mac OS X Server or OS X Server so that I moved it with a Core 2 Duo vs Quad Core, I have not had problems yet but the haven of the exhaustive tests with the server version.  I think it will go well, however, we should always do... maintain appropriate backups!

  Post edited by: WoodyZ - point makes it dlhotka about snapshots is a very good and must be taken into account! ;)

• addition of virtual machine / Server esx for production environment

  Hello

  How can we add virtual machine or esx server for production environment?

  In general... As his "simple terms?

  Install ESXi host

  Install, run and connect to the host via the gateway client installed from the host on an external workstation

  Then

  OR THE OTHER

  Install and run the converter on each physical computer that you want to become a virtual machine

  Once finished, turn off power to virtual and physical.

  OR

  Create a virtual machine and install the o/s CD drive.

  What you want is way off the coast without 1 million questions about your installation.