Delayed start, shutdown procedure

Similar Questions

• Will not install updates during the shutdown procedure

  Using WINDOWS UPDATER - I downloaded and installed the updates on my computer, but the computer needs to reboot / shutdown to complete their installation.

  After trying to stop using the button on the Start Menu of the computer starts the shutdown procedure.
  It starts to install the updates. IE - updates 1 of 8... Update 2 of 8 ect...
  It retains, however, stuck on one of the updates.
  The computer is not freezing, but I left the computer for 24 hours while he was "Installing updates 4 of 8 ' and he never finished installing the update.
  I would like to help with this problem because I can't stop my computer normally right now because it gets stuck on this problem.

  You receive errors related to updates?

  1. Open Windows Update by clicking the Start button, all programs and then click Windows Update.
  2. In the left pane, click view update history.
     http://Windows.Microsoft.com/en-us/Windows-Vista/see-which-Windows-updates-are-installed
  3. Find an update for Windows that has failed to install, and then double-click the update to view more information.
     Updates that have failed to install will display failed under status, next to the name of update.
  4. In the Windows Update dialog box, next to the details of the error, review the error code for the update has failed.
  5. Follow the links in the Windows Update dialog box under more information or help and Support to resolve the problem, then try to reinstall updates by using Windows Update in Control Panel or by mail with the error code and maybe someone may be able to help others.

  What are the error codes and how can I use them?
  http://Windows.Microsoft.com/en-us/Windows-Vista/what-are-error-codes-and-how-can-I-use-them

  Windows update General troubleshooting

  Suggestion:

  How to reset the Windows Update settings?
  http://support.Microsoft.com/kb/971058

• TIME delay start order and time limits

  Hi all:

  I have a question about the vApp properties & gt; Running dialog box. Page 56 on user's guide States:

  "In the tab running, determine the sequence of boot, boot delay and delay of closure order.

  You must type the numbers that are in progress, for example, 0, 25, 1000, to define the sequence. Negative numbers are not allowed. »

  That's all that is mentioned on the functions of startup time. I guess that the progression is from low to high - that is to say that the virtual machine called 0 would begin before the designation of the virtual machine as 25. Is this correct? The first VM in the sequence must be designated 0?

  My next question has to do with the start time text box. Suppose I have put vm1 to the order 1 order of 0 and vm2. If I want to vm2 start 60 seconds after vm1, can I enter start delay in the text box for vm1 or vm2? In other words, start-up time is used to determine how long after that a particular virtual machine is delayed to start after it is determined to be next in sequence, or the delay is used to determine how long after the virtual machine is started before the next sequence be allowed to power on?

  Paul D. Pindell VCP4

  VCD will start VMs in ascending order and then stop in descending order. For example, if you have three virtual computers with 0, 1, 2 boot order, the first to start is 0 then 1, then 2. When you stop the paralytic, the first stop is 2, etc.

  The VM startup time is the duration in seconds of the previous VM starting in the boot order. Using the same example as above, if the delayed start is 60, 180, 120 for 0, 1, 2 virtual machines, the first 60 is IGNORDED!. The virtual machine with the boot order 0 will start immediately, no matter what it has start delay is. Then, VMS with start command 1 will to power to 180 seconds after vm 0 is turned on. The last of them will begin to 120 seconds after that. The key is that the time is compared to the previous VM, not absolute time relative to the beginning of vapp.

  During the shutdown of a paralytic, the stop delay applies after the first VM is stopped. The stop delay on the virtual machine with the highest boot order is ignored. Then, the next highest start VM command stopped n seconds after one is arrested (where n is the stop of the second delay starts more high order VM).

  There is another type of start delay that can be set in the VC that causes the virtual machine to a break in the bios for a loading screen number of milliseconds. This parameter has nothing to do with how VCD starts VMs. As part of VCD, the delay is applied without even say VC to start the VM so that VC setting delay applies after a virtual machine is running and breaks to the bios screen. If you are interested in using the setting in the CR, you can find it in the "Startup Options" tab options dialog box settings VM.

  I hope this helps. Let me know if you have any other questions

  -Boris

• You can edit vmx files on multiple virtual machines in a cluster to allow changes of setting delay start via RCLI or Toolkit VI?

  You can edit vmx files on multiple virtual machines in a cluster to allow changes of setting delay start via RCLI or Toolkit VI? How?

  SAs desire a lead time of 10 seconds through the virtual company composed of several VCs with multiple data centers and clusters.

  Known: we can edit the .vmx file and add: bios.bootDelay = "10000" this adds stunted ms 10000 (10 seconds) when starting

  Known: we may have to re-register or some other mechanism to apply the changes to the start on the VMS settings

  Has anyone tried to make a change of large company to bootDelay on VMS? Any help?

  The script below will do what you want. Have fun.

  -

• Equium A100-027 - delayed start

  I recently bought the laptop Satellite A100-027 of my local PCWorld about 2 weeks ago.
  Shortly after, I noticed that the start was more delayed. He loaded the display of connection in about 45 seconds approximately and then I typed my password in. 2 seconds later, it loads the office and load the sound icon.

  The hard drive would become calm and nothing would happen for about 10 seconds when AVG anti-virus loaded.
  Then I had to wait 25 seconds before the computer became again active HARD drive and the icons on the desktop and then refreshed Wi - Fi, power and loading MSN icon.

  Overall, start press the button works / stop is just under 2 minutes.

  This speed, I don't have too much problem with, but I see not why it would be about 30 seconds late and do nothing to do before any loading.
  Once charged, the laptop works very well - fast and good, but the beginning mind.

  Occasionally, the startup is fast and once I got it in 1 minute and 10 seconds.

  No one knows what is the problem I have and how to fix it? I am running Windows Vista Home Premium that was preinstalled on your laptop.

  I personally don't have a problem and have same laptop.

  Try to update all the drivers. Check what are the startup entries there. You can check the updates to anything related to startup toshiba.

  You can get updates from the site and to check startup: (Win Key + R) > (Type "msconfig.exe") > (OK) > (Startup tab).

  Your startup time is very good. I guess that you have disabled some things provided with the laptop. If you disable maybe something you need?

• Windows XP freezes for 2 minutes after clicking on start - > shutdown (DCOM error?)

  Windows XP hangs for about 2 minutes after I click on start-> stop. So it takes 2 minutes to XP display the shutdown options.  I checked the event viewer, and it seems to point the problem to some sort of DCOM error. I have provided a screen shot of this error in the event viewer. Unfortunately, it is in Finnish, but it is essentially saying that 'a server (981... '. A4D) could not save with DCOM in a given period of time)

  

  Looks like a lot of unnecessary services on your pc... To change, go to run, type:

  services.msc in msc, scroll through, double-click one, review its properties...

  In addition, to give the stop or restart the pc, a faster time, go to run, type: regedit

  In regedit, expand: HKEY_CURRENT_USER/Control Panel configuration/locate & L.click on

  AutoEndTasks, go to edit, modify, set to 1 between 0 and family on regedit.

  This gives faster response, but the problem lies in the performance of services, Msconfig

  also gives details...

• Delay starts it CC banners with 10s

  Hello guys,.

  We are going to have problems when working with CC animate banner web delivery.

  When we test the local files, they work fine, but when send us them to a server, the animation delays of 10 or 15 seconds.

  Nothing happens, no charger, no message, just a white background and after 10 seconds, the animation starts.

  Any idea on what it could be?

  Not to do not quite agree with just.emma, but I think a preloader animation inside a web banner would be sad to see something!

  In your HTML code, find this line:

  var loader = new createjs. LoadQueue (false);

  Put this line after that:

  loader.setMaxConnections (6).

  I think it will load a lot fast enough.

  The TinyPNG suggestion is a good idea and will help a little bit more. The main slow is just a single image at a time downloading. Download 6 have both literally can do 6 X faster.

• ESXi 5.1 2 minutes delay start

  Hello

  How can I program a delay for a 5.1 ESXi to start 2 minutes?

  It starts at faster now...

  Sorry its my fault its setting BIOS but on M520 is enough no be limited i.e. no delay range.

  In any case, try adding this command 'sleep 120' local.sh leader just above line exit 0.

  See this KB:

  http://KB.VMware.com/selfservice/microsites/search.do?language=en_US&cmd=displayKC&externalID=2043564

• T460s delay start-up and BIOS error message ' error sending end post message me HECI disabled»

  Hi all

  I just bought T460s in the website of sale at auction...

  After you install windows, I found several problem:.

  1 I can't update my bios

  2 the machine some time having the intermittent fan noise and restart by itself.

  3 I can't seem to update intel management engine firmaware

  So, I decided to return all the bios to factory setting...

  so my laptop is fine, but sometimes the laptop take a few momet to start and send the message:

  "error sending me end of message post HECI disabled.

  di decides to put my laptop to allow the lenovo Service Center:

  the technician suggest my Planar is a problem...

  but when I checked my machine detec system my warranty has expired...

  any suggestion is appreciated...

  This my thinkpad 3, my previus SL400 and T420 machine works great

  Thank you.

  If you can get into the BIOS, try to disable AMT (under the Security menu)

• Dell Inspiron PC delay start before BIOS, how to we deny this?

  Recently, we received 3 new Dell inspiron PC and then priming them to 2 min 5s before the computer starts obviously the boot (reached the BIOS screen). We have no idea how to solve this problem, if anyone knows please let us.

  We have: check the start menu and the trunk so seems to be in the right order, have fragmented off the hard drive, updated the operating system Windows windows 10 7, checked for several installed operating systems, looked at the system configuration files and have not found something wrong, as well as other things that I can't think right now. (no obvious hardware incompatibilities found)

  Windows 10 pro

  Inspiron 3847

  Intel core i3-4160

  8 GB of RAM

  64-bit operating system

  MSI G-Force GT 730 2 GB video card

  If it comes with Windows 7 installed, it won't win 10 installed also. Apparently, you have right to downgrade to Win 7 on a machine to win 10. If Dell installed Win 7 and included a drive to Win 10 installation for convenience, in case you have decided to use Win 10.

  Since you upgraded to Win 10, have you installed all the drivers of 10 straight Win of the page support for this model?

  You said that the boot order is 'correct '. This means that your hard drive is listed first?

  Go into the BIOS and look for the USB startup and - if all options - make sure they're ready to USB -NOT start.

  What happens if you unplug everything except the keyboard, monitor and mouse. For example, no printer, no cable network, etc.?

  Using a keyboard/mouse wired or wireless? And are they connected to the back USB ports?

  Is this something to run at startup, for example an anti-malware scanner?

  You may need to contact Dell Technical Support for assistance. They'll cover relating to software for the first 30 days of the invoice date (not delivery date). If it is hardware, they are going to cover for at least 1 year.

• In the start-up procedure, how can I remove "press ESC to access the Start Menu" when the machine hangs at the HP logo screen?

  Hello

  I am running 64 Win7HP on a laptop HP dv3, processor Core 2 Duo 4 GB DDR2 Ram, 320 GB HD, just as it came out of the box when purchased directly from HP replaced EXCEPT Vista OS with 64bits Win7HP.  Machine worked fine until the LAST update of Windows, where during the reboot, I got to the HP logo screen and in the lower left corner of the screen appeared the statement (for THE FIRST TIME) "Press ESC for the Start Menu."  Pressing Esc translates into another command "press Esc...".  Break. " When you press ESC, you get a black screen until the machine goes to sleep UNLESS you press Ctrl + Alt + Delete. If you press the 3 key combo, it will continue to start and brings you to the screen of your password for access and then operate nicely, until you turn off the system. So, how can I get rid of the superfluous instructions and get this thing here where he turns and goes directly to the screen of password without intermediate steps?  Restore points are long since gone for immediate access to the front last Win Update.
  The answer may be simple, but until now it has escaped my low range.  Any help is appreciated.
  Creyn1

  Hi Creyn1,

  Welcome to the community Microsoft and thanks for posting the question.

  According to the description, it looks that you are facing a problem when connecting, he would be grateful if you can answer this question in order to help you further.

  Do you receive an error message or error code?

  I suggest trying to boot in safe mode and check if it helps.

  Start your computer in safe mode: http://windows.microsoft.com/en-US/windows7/Start-your-computer-in-safe-mode

  If its working fine with safe mode then put the computer in a clean boot state, then check if that helps you

  Put the computer in a clean boot state and check if any third-party application is causing the problem, as the start-up boot helps eliminate software conflicts.

  How to solve the problem by running the clean boot in Windows 7: http://support.microsoft.com/kb/929135

  Note: Once you have completed troubleshooting, perform the steps in the step 3: to reset the computer as usual.

  If you have any other questions or you need Windows guru, do not hesitate to post your questions and we will be happy to help you.

• How can I configure windows update in order to start the procedure, when I connect to the school network?

  OT:help configuration of Windows Update.

  I use windows 8, now my problem is that I have to enter a user_name and password each time you start the browser, if you close the browser, or open another browser, you must enter user password again once you use a wifi or lab computers. Now when I connect to wifi, my browser instantly request name username-password but windows update is not so. I tried this a few times, only once named windows update displays dialong box asking username and password and it takes hours to do.

  How can I configure windows update already if start update already when I connect to the school network.

  Wifi authentication which traverse the browser means that you still need to open a browser and a connection that first, before any other programs can access the network.

• UNIx connector server start/stop procedure

  Hello

  In the oracle UNIX Connector documentation, it is said

  To install the connector on the connector server:

  1. stop the connector server.

  2 copy the Directory Connector installation media bundle beam connector JAR file in the following directory:

  CONNECTOR_SERVER_HOME/packages

  3. start the connector server.

  I created the above directory in the target UNIX system and copied the org.identityconnectors.genericunix - 1.0.0 directory bundle connector installation media.

  But, how to start and stop the server in the system target UNIX?

  Can we install the connector on a windows machine server instead?

  Thank you

  The Java Connector server to unload the treatment or isolate somewhere else. You don't need to install the connector for the connector server although if you do not. It is in the documentation in the installation steps and the differences between Java and .net.

• After a delayed start, several times I get the error message: "the server does not currently. Have you tried regular recommendations.

  I bought InDesign. > I downloaded the exe for CreativeCloud
  When I double click on this file > it takes time to start and then the progress bar stops after about 2-3 seconds >
  It then shows error I menitoned > gives me the opportunity to start or cancel > does not.
  I'm on a corporate network I guess. Educational institution

  Windows10
  
  

  Cloud of InDesign, or serial CS6?

  If CS6, try this Windows 10 Forums

  Please read https://forums.adobe.com/thread/1499014

  -try some steps such as changing browsers and disable your firewall

  -also clear the cache of your browser if you start with a fresh browser

  -check the file hosts for blocked entries https://forums.adobe.com/thread/1912777

  http://myleniumerrors.com/installation-and-licensing-problems/creative-cloud-error-codes-w ip.

  https://helpx.Adobe.com/creative-cloud/KB/creative-cloud-desktop-application-failed.html

  http://helpx.Adobe.com/creative-cloud/KB/failed-install-creative-cloud-desktop.html

  or

  A chat session where an agent can remotely look inside your computer can help

  Chat/phone: Mon - Fri 05:00-19:00 (US Pacific Time)<=== note="" days="" and="">

  Cloud creative support chat (all creative cloud customer service problems)

  http://helpx.Adobe.com/x-productkb/global/service-CCM.html

• In tabular form button to start the procedure with parameter

  I have a column in my table presentation that calls a procedure.
  I got this works with dynamic action related to a jquery selector.
  
  Now this procedure (called dynamic action) takes a parameter. I need to pass the value of the column, the ID of the line. (it is the value in the column that appears as a button)
  
  How to use this value in my procedure?
  I tried to pass this value in the column link attributes to a page element, but this action is performed after the dynamic action is called.
  
  Thanks for som advice!

  jstephenson wrote:
  You should be able to try something like this: javascript:callMyPopup(#ROWNUM#). I do it on a column derived in tabular form. Inside of my callMyPopup I have also to retrieve a value from one of the other fields on the line. You should be able to check your html code to get the correct f0X id. Here's a piece of the callMyPopup function
  If (bow<>
  {
  psearch = document.getElementById('f05_000'+pRow).value;
  }
  ElseIf (bow<>
  {
  psearch = document.getElementById('f05_00'+pRow).value;

  I hope this helps.

  Thank you

  Jeff

  In fact, instead of these cases the conditions you can use an existing table:

  document.wwv_flow. F05 [Prow], which gives you the item. You can then access any property of this element you want. ID, value, name etc.

  Trent