Dreamweaver 8 does not work on my XP Pro

Similar Questions

• I upgrades the operating system of my mac to OSX 10.9.4 and now my Dreamweaver CS5 does not work, it just that closes unexpectedly.  Help, please.

  I upgrades the operating system of my mac to OSX 10.9.4 and now my Dreamweaver CS5 does not work, it just that closes unexpectedly.  Help, please.

  It turns out that my video card is the cause. I removed the accidents stopped and he

• My shift key does not work on my MacBook Pro

  My shift key does not work on my MacBook Pro. Can I use capital letters but only if I click on change and it's annoying. When I click on the passage icon shift comes at the top right of my screen to show its on but when I click on the lock button nothing happens as it used to glow green when I clicked it. Before someone says go to the system preferences and go to the modifier keys and restore them or make sure caps lock shift is on lock shift, I've tried that already, I looked it upward and found nothing similar. Help ASAP would be appreciated because it is really annoying

  Hello Gracepullan1,

  I understand that shift key of your MacBook Pro does not respond as before. Fortunately the steps below can help to restore the functionality of the SHIFT key on your Mac.

  1. In the Apple menu, choose System Preferences.
  2. On the view menu, choose the speech.
  3. Click on the text to Speech tab.
  4. If "Text Speak selected when you press the button" is enabled, the key or combination of keys set to read the text cannot be used for other purposes, or used for typing text - click on set the key and replace it with a less commonly used key combination (try using the modifier such as SHIFT keys, command) Option and control). Or disable the option "Read the selected text when the key is pressed".
  5. Click the accessibility pane or universal access in system preferences, and then click the keyboard tab.
  6. Make sure the slow keys is off. With slow keys on, you must press a key for a longer period of time so he can be recognized.
  7. In the accessibility pane or universal access, click the mouse and make sure mouse keys is turned off. With the active mouse buttons, you cannot use the numeric keypad to enter numbers - instead the keypad moves the pointer (cursor). (There is an option to activate the MouseKeys to five presses down option, you can disable this option to avoid accidentally activate it.) If the mouse keys is enabled and you are using a keyboard without the numeric keypad or Num Lock function, see Impossible to type while mouse keys is enabled in Mac OS X.
  8. If the function keys on the top row of the keyboard do not work as expected, see Mac OS x: how to change the behavior of the function keys.
  9. If the problem persists, use the keyboard Viewer to help isolate the problem:
     1. Click the component language & text (Mac OS X v10.6) or international (Mac OS X 10.5.8 or earlier) in system preferences.
     2. Click on the tab Input Sources (or tab Menu entry under Mac OS X 10.5.8 or earlier version).
     3. Click on the keyboard and the characters 'On' box Viewer checkbox to select (click on the viewer of keyboard "On" checkbox under Mac OS X 10.5.8 or earlier).
     4. In the entry menu (flag), choose Show Keyboard Viewer.

  
  

• If the keyboard is connected and detected by OS X, the keys you type will highlight in the keyboard Viewer window. Open TextEdit (or any text application) and try to type something using the keys that failed before to see if they highlight in the keyboard Viewer.
• Start up from the Mac OS X installation disc, choose Terminal from the utilities menu and test buttons that did not previously.  If the keys work while started from the install disc, the keyboard works correctly.  How to solve a problem of software allows to isolate the software problem that may be causing the keys to not answer.

One or more keys on the keyboard do not respond
https://support.Apple.com/en-us/HT203162

Sincerely

• AirDrop does not work on my MacBook Pro. I want to transfer PDFs to my IPad.

  AirDrop does not work on my MacBook Pro. I want to transfer PDFs to my IPad.

  The specs you listed for mac does not support the drop to an iOS device:

  From:

  Use AirDrop to send the contents of your Mac - Apple Support

  Release system requirements

  To send items to an iPhone, iPad or iPod touch, you have a 2012 model or more recent Mac with OS X Yosemite or later version, except the Mac Pro (mid-2012).

• OfficeJet 8500 a 910 scan does not work with my Macbook Pro Snow Leopard 10.6.8

  OfficeJet 8500 a 910 scan does not work with my Macbook Pro Snow Leopard 10.6.8.  I tried to reload of apple and HP.  My drivers and software are up to date.  I tried to scan from preview, Capture and print browser.

  It worked finally.

  Why doesn't HP have updated the drivers for a Macbook Pro 10.6.8 Snow Leopard?  I couldn't find one for 10.5 or 10.6 Leopard.  I tried everything I could find. I found a note on the edge of Disussion which suggested someone try a driver for another HP printer may be similar.  I found if I used the full program for Macbook Pro 10.6 Leopard I could scan.  The fax appeared to be installed via blue tooth.  I have not faxed anything, but it has been tested during the installation of the program.  Complete program of the HP I can't print.  I loaded via Apple an another whick of printer HP Officejet 8500 A910 allows me to print.  It is the only way that I could make use of my HP printer, scanner and fax.  Crazy, but I think it works and I can put some scans and, hopefully, fax to my Macbook Pro.  I appreciate the help.  Please encourage the HP programs and drivers for my Macbook Pro Snow Leopard 10.6.8.

• My preview of Dreamweaver feature does not work

  My preview of Dreamweaver device mode does not work. Preview of devices service is currently unavailable restart dreamweaver... etc. I used 2 days ago, the program worked but today does not work.

  I have no idea. I checked my adobe ID. Any idea guys? I couldn't solve the problem. the last time, I downloaded adobe cc mobile version for my Tablet and I wanted to use app even after I removed the app from my tablet. Maybe reason this app? I removed Dreamweaver cc my PC and after that I installed again but same problem. Can you guys help me what is happening? Thank you

  Looks like it's down to everyone. I'm reasonably sure that the function speaks to the internet to create QR code. I suspect the server as negotiations of the function that is broken.

  More than likely it will all come back at a random time in the near future.

  To avoid this mess all together, I suggest you set up a test server local for your sites instead. It will work in much the same way that the preview of the device, allowing you to test your site on any device connected to your local area network, without the possibility of a server somewhere on the internet crash taking the feature down...

  Using Dreamweaver | Set up a test server

• After you have installed Windows 10, Dreamweaver CS4 does not work

  Hello, sorry my English is PVR. I have a problem with Dreamwever CS4. I have install Windows 10 and after I intsaller my Dreamweaver cs4, but it does not work. Do you have a solution for me? Thank you

  [Edited by moderator subject line]

  This can help problems during installation or by opening Dreamweaver on Windows 10

• The Touchpad right button does not work on the Satellite Pro L series

  The icon in the taskbar indicates that the right button is permanently pressed, if it is not.
  So I can't right click at all. A radio mouse works fine, but there are times I want to use the touchpad.

  In addition, the screen does not turn off, and the computer goes to sleep after the hours set in the options of energy saving.
  I listen to the radio a lot and do not want to display on.

  > The icon on the task bar shows that the right button is permanently pressed, if it is not.
  > So I can't right click at all. A radio mouse works fine, but there are times I want to use the touchpad.

  This could be linked to defective button. If you cannot use the right button, and the button appears to be clicked down, then I suppose that its hardware malfunction.
  In this case it must be replaced.

  > In addition, the screen does not turn off, and the computer goes to sleep after the hours set in the options of energy saving. I listen to the radio a lot, and don t want the display on.

  Have you chosen the right power Plan? In Control Panel-> power options you have to choose the diet plan and should click: change plan settings. Here, you can change the time when the display must be disabled.
  If this does not work, then I guess that this feature does not work because you press the button of the touchpad and the windows OS think that the notebook is in use

• TV out button does not work on my Satellite Pro M30

  Hello

  I installed Windows XP SP2 and all drivers for M30 but the "TV out" button does not work although I have also installed the tool "Controls Button from Toshiba" (continues to ask to be assigned to a program), it worked before installing the new.

  I also noticed that the "Fn + F5" also does not work too (eg. do not send the signal to the TV).

  Can anyone help?, thanks in advance.

  Hi Karim

  Write about you? :)

  In any case, try to install TOSHIBA common Modules again. Maybe it helps!

• Web Cam does not work on my Satellite Pro C850-10 t

  Hey, I have a Satellite Pro C850-10 t and my web cam does not work. Whenever I try to use it, it is said that the built-in cam is not connected or activated. I tried to download the drivers from the site web cam, but it does not solve the problem

  What should I do?
  Thanks in advance :D

  Do you use the preinstalled original WIN7 64-BIT HOME PREMIUM?
  Webcam is entered correctly in the Device Manager?

• Touchpad does not work in my new Pro of Satellite M40X

  Hello world

  Since I bought my Satellite Pro M40X, I found that the touchpad works sometimes (especially, but not at any time when the computer is connected to an electrical outlet and the battery is full). However, most of the time it does not work and the cursor keeps freezing in the middle of the screen.

  When I use my mouse USB Genius, it works fine.

  I tried everything that follows, but all have failed:
  1. check Control Panel, who always says that my touchpad works fine and active
  2 - pressing Fn + F9
  3 - update the BIOS and drivers ALPS touchpad on the TOSHIBA site and reinstall the
  4 - run the computer in safe mode
  5. using the CD to restore the system back to factory settings

  All these tests failed and the problem is still present.

  Can someone help me solve this problem. It is still a new laptop and I have 1 year warranty. Is this a hardware problem? Please help me.

  Amir

  Hello Amir

  All what you have done is quite right and if the problem persists after the recovery procedure it may be a hardware problem. In my opinion, you should contact the Service partner and let check the device.

  If the warranty is still valid you should use. If something needs to be changed, it will be granted free and guarantee will cover all costs.

  Good bye

• HP Pavilion dv7-2070ed: original program software does not work in window 10 pro and program

  Hello.

  I changed the windows for a full installation of windows 10 pro due to the corruption of the window vista recovery disk. (lost the new build software pre installed). Before I had vista Home premium. Some of the original program software don't work with wins it 10 pro. I found a rear window and HP Media Media Center smart webcam. All others on HP Smart media are not working due to no driver or competable with 10 pro wins. Is there some alternate software with the same use? I know that hp will not update the software program at the present time, alternatives is a server of HP smart media, but I would like to have a similar cause of program I liked the program.

  Anyone has a suggestion

  Hi Wawood

  Thanks for your solution. I've tried, but it does not work what so ever. I guess I better to forget and take my lost. Quite sad but its one of the things that fact you win and you lose a game. Some programs are perfect, but if the company of the pc or laptops drivers or updates on legacy systems we can not anything on this subject. Guess that's one of the problems with this new victory 10.

  Thanks anyway

• D Link DWA 140 Wireless Stick does not work with Windows 7 Pro x 64

  After searching the Internet for most of the day, I am naïve. Installed Win 7 Pro x 64 (from MSDN-AA) today and I wanted to use my job well DWA 140 to connect to my router for internet. The Board in use is the Asus P5p77-M. All, who tried with 2 different USB stick work USB ports in question. Windows is up to date, as it's the Bios and Chipset drivers, on the site of Asus's latest versions are installed. The DWA-140 appears up like works well in my device manager, but what is it. When you install the software from the site Web of D-Link, the connection software shows no WiFi at all, and the same thing happens if I chose to install the drivers Ralink (manufacturer of the chip inside the DWA-140). All the ideas here what to do?

  Carsten

  What happened when you tried the Windows software?

  He was able to detect the card?

  Looks like a program prevents the identification of the card.

  I would like to start with a clean boot to make sure that a startup program is not causing the problem:

  http://support.Microsoft.com/kb/929135

  If this does not work, I stay in the State of clean boot and disable anti-virus and firewall temporarily and reinstall the software of connection:

  http://Windows.Microsoft.com/en-us/Windows7/disable-antivirus-software

  Chris
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• IncrediMail Plus does not work in Windows 8 PRO, even in compatibility mode

  Since the installation of Windows 8 PRO my incredimail Plus program e-mail does not work even in different compatibility modes.

  IncrediMail (Perion) technical support is worse than useless and aren't even not respond to requests for advice or assistance

  I found a post on their forums date dated 1/12 Nov: http://forums.incredimail.com/viewtopic.php?t=11167#p42981 indicating

  Please note that IncrediMail 2.5 version is now fully compatible with Windows 8.

  Note: This version uses IMAP technology so that you can experience problems when importing the old backup files.

  No mention of how to get around that.
  

• ASUS touch EP - 121 does not work after Windows 8 Pro 64-bit install

  At ran Windows 8 Developer Preview and Preview of Windows 8 consumers on this ASUS Ep 121, Touch worked with pen and fingers, after that Windows 8 Pro 64 Bit OEM installation on 10/27 tap does not work.

  Reinstalled Windows 8 Pro 64 Bit OEM and touch works during the installation process, but not after initial start-up. Don't see the unknown devices in Device Manager.

  Update to the latest version of the ASUS BIOS dated 23/10/2012. Must be the driver problem or work around.

  At ran Windows 8 Developer Preview and Preview of Windows 8 consumers on this ASUS Ep 121, Touch worked with pen and fingers, after that Windows 8 Pro 64 Bit OEM installation on 10/27 tap does not work.

  Reinstalled Windows 8 Pro 64 Bit OEM and touch works during the installation process, but not after initial start-up. Don't see the unknown devices in Device Manager.

  Update to the latest version of the ASUS BIOS dated 23/10/2012. Must be the driver problem or work around.

  Hello

  Read the following article.

  Touchscreen does not work after the quick start on a computer that is running Windows 8 or Windows RT: http://support.microsoft.com/kb/2769287

  Read the article and then click on the button download software patch is available at the top of the article.

  Accept the license agreement.

  Follow the instructions to receive the fix.

  Concerning