Drive does not work due to the expiry of the trial CS6 uh... wth

Similar Questions

• Of defrag does not work due to the custom configuration created by another program

  When I try to do a defrag, I get a message saying "disturbance disk currently uses custom settings created by another program"

  Before changing the annex, you need to remove the custom settings.  Here's this message 2 boxes, 1 said 'delete settings' and the other says "Cancel".  When I click on 'delete settings', I am back on the desktop. This repeated its self everytime I have try to defragment, it does not open as administrator or in 'safe MODE '.

  Dell Inspiron 1545

  Windows 7.      64-bit with more than 70% of available space.
  I am somewhat tech savvy if things are fairly well explained.
  Can someone help
  Thank you very much

  You have a few options. I finally got my work to the rigging.

  1. all reformat

  2 * at microsoft

  3. take out the computer in a microsoft store, and it will fix it for free (why? because w10 and they know it causes problems)

  W10 return to w7 installed incorrectly. Your computer is still acting as w10 is always there, even when it is not.

  So what I did, i wouldn't recommend, receiving a Filipina Lady a (microsoft) call center to work on and fix my computer. They have done MUCH worse. (I already insured at this point that microsoft is fixing my computer for free because of the w10) So after the fried Lady basically my computer, I brought my rig to the nearest store from microsoft and they fix everything, for free.

  NOW, after I brought my home computer, I downloaded a program 3rd party called GWX Control Panel. What it does, is removes all the updates from the W10, removes the POS auto upgrade feature and block updates future w10.

  http://ultimateoutsider.com/downloads/---> click for GWX

  If you do not use this program, w10 automatically updates AGAIN! Even though microsoft said it is a rare event DONT BELIEVE IT! It is a widespread problem, and microsoft is FORCED to happen.

  Needless to say, I lost faith in microsoft because of faulty software programming. (even my xbox one...) So I not buy more than several microsoft products, because of these bad blantly business practices.

  I'm sorry this happened to you, and I understand the frustration. Especially if younever wanted to w10 in the first place.

• CD/DVD drive does not work after restoring the computer in Vista

  My CD/DVD has stopped working. Now if I boot my computer it crashes just on the main start screen. I have to unplug the power to the drive in order to boot my computer. I've corrected the driver once before but my computer crashed and I had to restore. Now, the problem happened again and I can't find what I did the first time to fix the driver. Help, please.

  http://support.Microsoft.com/kb/982116/en-AU

  Your CD or DVD drive is missing or is not recognized by Windows or other programs

  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  See if the information above solves the problem.

  See you soon

  Mick Murphy - Microsoft partner

• Satellite 5100: Driver CD does not work to recover the operating system

  My laptop Satellite 5100 did not work today. The whole system broke down, and I can not open any program. I want to recover my system but my CD driver does not work, I can not use the recovery CD to run the system.

  What should I do? Can I replace a new CD by myself? Is there another way to recover the system without the CD driver?

  Thank you very much and I look forward to hear from you.

  Hello Bingping :D (Lazy nickname)

  Well, first of all you are sure that the drive is dead or it of just not possible to boot from the recovery CD?
  Press the C key immediately after booting laptop (by pressing the power button) to boot from the CD drive.

  If it doesn t work so try to boot from the original Windows CD. Perhaps the Toshiba Recovery CD is damage. But if it is not possible to boot from a CD so I would say that the reader has a malfunction.

  Of course you can replace the car yourself. It of not very difficult, but you must be careful. Not every drive is compatible. The caught player support, you can order the Toshiba ASP in your country.

• Update of Vista 32 bit does not work after replacing the hard drive

  A month ago the hard drive of my computer (ACER Aspire 6920) had to be replaced. The disk image hard precedent (which includes the c: with Windows Vista Home Premium 32 bit, SP 2 build 6002) has been mirrored to the new hard drive. Everything seemed to work fine until I noticed that I don't have more updates from Microsoft. I tried a manual update and got the message that the update service was not working and I have to restart the computer. However, the Task Manager showed that the update service has been executed. Of course, I rebooted the computer, but nothing has changed.

  I found a whole bunch of recommendations for this issue in this forum, but nothing seems to work:

  • The Microsoft FixIT tool indicates a problem with the update of components, and then said that the problem had been solved successfully. However, the problem is still there and rerun the FixIt tool Gets the same message on a problem (yet) found and fixed.
  • I also stopped the update service, delete all content in Windows/C:\Windows\SoftwareDistribution and restarted the service. without success.
  • I've temporarily disabled my security suite (Eset Smart Security 6) and tried the update. I also have fittings the folder C:\Windows\SoftwareDistribution to the scope of the antivirus, without success. On the old hard drive, I used a different security suite so I thought that maybe the ESET (that I installed everything recently) could be the cause of the problem, but that doesn't seem to be the case.
  • I also followed the instructions provided by Microsoft at http://support.microsoft.com/kb/971058, but again, no change at all. However, it should be noted that registering some DLLs that Microsoft listed does not work (message that the DLL is not found or some server entry point (my translation, I'm using the German UI and don't know English good term; sorry) could not be found.)

  Http://support.microsoft.com/kb/947821 , I found another tool that supposedly can solve some problems of updating; I downloaded the version for Vista 32-bit, but it cannot install it on my computer (error code = 0xc8000247 during installation).

  So I'm really lost now what else to do. I would appreciate any suggestions. Please note that I am not technically very warned :)

  ARG, apologies.

  Was not aware that they had dropped support for Vista... (I myself have 'graduated' Vista earlier)

  The fact that you have not already installed TSRI is exactly your problem.

  Recent hard drives using 'Sectors 4 K', also known as 'Advanced Format Technology'.

  If the installed hard disk driver currently is not compatible with this specification,

  It will result in oddities like the status of the service Windows Update is not recognized correctly.

  Installation TSRI will fix this in most cases.

  Alternatively, if you are using Vista SP1 or later version (or 7 SP1), you can use the real driver.

  Since you are already updated to SP2, we will see if it is a viable solution.

  Go to: start-> Control Panel-> programs-> programs and features

  In the list of installed programs, locate and remove if found.

  -Intel Matrix Storage Manager

  -Intel Turbo Memory

  This should force your computer to go back to the real driver provided by Vista.

• my disk driver does not work or even showed that I have have I have the driver on my compyter

  on 'My computer', it shows same (on hard disk drivers) I have a driver cd, and when I put a CD looks like it's trying to work, but nothing happens.

  How to fix this?

  Hello

  Did you of recent changes to the computer?

  This problem may occur if one of the following scenarios is true:
   
  1. pilots of filter in the CD and the DVD storage stack are not migrated successfully to Windows 7.
   
  2. you uninstalled CD software that fails to withdraw properly in the registry.
   
  3. that you have installed a software that adds filter drivers in the CD and the storage stack of DVDs that interfere with existing filters.

  I suggest you first click "Run now" article.
   
  Your CD or DVD drive cannot read or write media
  http://support.Microsoft.com/mats/hardware_device_problems/en-us

  If this does not work, manually follow the steps indicated below the articles.
   
  The CD drive or the DVD drive does not work as expected on a computer on which you updated for Windows Vista/7
  http://support.Microsoft.com/kb/929461

  Registry warning

  Important this section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  Back up the registry

  http://Windows.Microsoft.com/en-us/Windows7/back-up-the-registry

• CD-ROM/DVD-ROM drive does not work. Device Manager indicates problem and there is no volume listed on the Volumes, how to fix tab?

  Description of the drive is HL-DT-STDVD +-RW GSA - T11N ATA Device Properties. Verified drivers and they are up to date.  Under device status "this device cannot start. (Code 10) clicked on search the Solutions, but no solutions are shown.  Have trouble with the DVD because I had the computer and have had several conversations with Dell but I think that my extended warranty just expired.

  Hello

  Description of errors related to the 10 Code that generates the Device Manager in Windows on computers
  http://support.Microsoft.com/kb/943104/

  Step 1: Please do all the same underneath if you did some before as is often total
  a process that solves the problem.

  Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
  Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
  RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
  below.
  
  Then, work your way through these - don't forget the drive might be bad, could be a coward
  cable or slight corrosion on the contacts (usually for a laptop) and other issues.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  Try this fix manually if the Fixit 314060 does not work
  http://www.pchell.com/hardware/cd_drive_error_code_39.shtml

  Your CD or DVD drive is missing or is not recognized by Windows or other programs-
  a Mr Fixit
  http://support.Microsoft.com/kb/982116

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
  for Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error in Windows
  Vista installation after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
  ends. Remove and replace, do not just tight. For laptops, you can often clean power and
  contacts data with a pencil eraser.

  Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
  manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

  ===============================

  Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD
  Burn and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
  do it right.

  Did you follow the Troubleshooting Guide for the reader who still does not work? There are
  the entries in registry that the troubleshooter does not solve and those who "might" be the cause.

  Check with your Maker system and a device for the two possible firmware updates and
  the correct registry entries for your car.

  Here are the keys that I of course are those in question - for the subkeys of the CD/DVD drive
  as there will be other subkeys in these keys. Do not forget to ask specific keys involved as well as
  the parameters.

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  -----------------------------------------------------------------------

  You can probably find more info here and maybe even the exact registry for your CD/DVD settings
  drive from someone with the same model.

  Forums - a lot of expert real help
  http://Club.myce.com/

  CD/DVD units
  http://www.myce.com/storage/

  Use DevManView to locate the CD/DVD in the registry (be careful and do a prior Restore Point)
  nothing change) - find the DevManView device and then make a right click on it free in RegEdit.

  DevManView - free - an alternative to the standard Windows Device Manager, which displays all the
  devices and their properties in flat table, instead of the tree viewer
  http://www.NirSoft.NET/utils/device_manager_view.html

  I hope this helps.

• CD/dvd drive does not work - it is recognized when the computer starts, and it is listed in the Device Manager?

  I am running Vista Home Premium on a laptop Compaq Presario F700. It is listed in the list of computers of readers, it is listed in Device Manager. The lites drive that the computer boots so I know it is detected. When you run itunes or media player the player does not open. When I push the drive button it will not open. It opens with a paperclip in the exit hole. It cannot read a CD or a DVD. None of the media players even recognize there is a disc in the drive. I tried to run fixit, but it would not drive either. I tried restoring from a previous backup, without change.

  Hello

  Check / settings (BIOS/CMOS) often F2 so watch the screen as it starts - place CD/DVD
  1st in the boot order (remember to put it at the time where the fact).

  Then put in a DVD to boot Windows and see if the driver works.

  If it doesn't then it's a hardware problem.

  =======================================

  If the drive has worked in the test above, that these can help:

  Step 1: Please do all the same underneath if you did some before as is often total
  a process that solves the problem.

  Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
  Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
  RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
  below.
  
  Then, work your way through these - don't forget the drive might be bad, could be a coward
  cable or slight corrosion on the contacts (usually for a laptop) and other issues.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  Try this fix manually if the Fixit 314060 does not work
  http://www.pchell.com/hardware/cd_drive_error_code_39.shtml

  Your CD or DVD drive is missing or is not recognized by Windows or other programs-
  a Mr Fixit
  http://support.Microsoft.com/kb/982116

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
  for Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error in Windows
  Vista installation after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
  ends. Remove and replace, do not just tight. For laptops, you can often clean power and
  contacts data with a pencil eraser.

  Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
  manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

  ===============================

  Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD
  Burn and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
  do it right.

  Did you follow the Troubleshooting Guide for the reader who still does not work? There are
  the entries in registry that the troubleshooter does not solve and those who "might" be the cause.

  Check with your Maker system and a device for the two possible firmware updates and
  the correct registry entries for your car.

  Here are the keys that I of course are those in question - for the subkeys of the CD/DVD drive
  as there will be other subkeys in these keys. Do not forget to ask specific keys involved as well as
  the parameters.

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  -----------------------------------------------------------------------

  You can probably find more info here and maybe even the exact registry for your CD/DVD settings
  drive from someone with the same model.

  Forums - a lot of expert real help
  http://Club.myce.com/

  CD/DVD units
  http://www.myce.com/storage/

  Use DevManView to locate the CD/DVD in the registry (be careful and do a prior Restore Point)
  nothing change) - find the DevManView device and then make a right click on it free in RegEdit.

  DevManView - free - an alternative to the standard Windows Device Manager, which displays all the
  devices and their properties in flat table, instead of the tree viewer
  http://www.NirSoft.NET/utils/device_manager_view.html

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• CD/DVD drive does not work error Code 19 a dI have tried all the solutions of correction that I can find.

  Windows cannot start this hardware device because its information of configuration (in the registry) is incomplete or damaged. (Code 19)

  Click on 'Search for solutions' to send data about this device to Microsoft and to see if there is a solution available.

  I tried Mr. Fixit, and I still keep getting the same message again and again... It was working fine, less then a month ago.

  Hello

  19 code means there is a driver conflict such as two devices attempt to use the same resources.

  Please make all underneath the same if you've done it before as it's often the total of the process which
  solves
  the question.

  Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
  Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
  RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
  below.

  Normally the above will solve this problem if not work your way down through them, even if you
  done before.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
  Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error during Windows Vista
  Setup after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
  manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

  --------------------------------------------------------------------------------------

  You have disk problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD burning and)
  Playback of CD and DVD). So it is not unusual for parts from 1 or 2 to not work so that others do
  correctly.

  Did you follow the Troubleshooting Guide for the reader who still does not work? There are
  the entries in registry that the troubleshooter does not solve and those who "might" be the cause.

  Check with your Maker system and a device for the two possible firmware updates and
  the correct registry entries for your car.

  Here are the keys that I of course are those in question - for the subkeys of the CD/DVD drive
  as there will be other subkeys in these keys. Do not forget to ask specific keys involved as well as
  the parameters.

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  -----------------------------------------------------------------------

  You can probably find more info here and maybe even the exact registry settings for your
  CD/DVD drive someone with the same model.

  Forums - a lot of expert real help
  http://Club.myce.com/

  CD/DVD units
  http://www.myce.com/storage/

  I hope this helps.
  Rob - bicycle - Mark Twain said it is good.

• My WD 3 USB drive does not work in the 3 USB Ports on my Lenovo W530 lap. But work in the regular ports.

  My WD 3 USB drive does not work in the 3 USB Ports on my Lenovo W530 lap. But work in the regular ports. What can I do to fix this?

  Do not use windows update for drivers.

  Update your drivers Lenovo support and see if that helps

  If the lenovo is new, you can contact Lenovo support to asertain why usb3 ports apparently do not work

• keyboard driver and the mouse does not, uninstall driver does not work, any ideas?

  Just bought a sony vaio and have the driver of keyboard and mouse not working, uninstall the driver does not work, no idea how to solve this problem

  Hello

  Exactly how you are trying to install the driver?

  We will analyze and identify the cause of the problem. You can connect a keyboard or an external mouse and check.

  Method 1: Hardware store.
  

  Run the troubleshooter of material and check if it works.

  Follow the steps to run the Troubleshooter:

  a. press the keys Windows + C on your keyboard to show the charms.

  b. type Troubleshooting , and then clicksolving problems under settings.

  c. now, type Hardware Troubleshooter in the optionSearch .

  d. click convenience hardware store to run the troubleshooter.

  Method 2:

  You try to install the drivers on the manufacturer's Web site and check with the question.

  http://www.Sony.co.in/section/support

  Note: Search the driver by using the model number and download the latest driver.

  Reference:

  Why Windows is not find my device?

  http://Windows.Microsoft.com/en-in/Windows-8/why-isn ' t-windows-conclusion-device

  Hope this information helps. Response with status so that we can help you.

• I bought Adobe Lightroom 6 only to see my DVD drive does not work with Windows 10.  Is it possible to download Lightroom?  I have the DVD with the serial number.

  I bought Adobe Lightroom 6 only to see my DVD drive does not work with Windows 10.  Is it possible to download Lightroom?  I have the DVD with the serial number.

  Download and install the trial version of Lightdroom CC.

  Then enter your serial number, follow these steps

  How to convert a trial CC 6 Lightroom Lightroom

• FixIt center operating system is not compatible Windows and update does not work due to 8007066

  I have an Asus Essentio with Windows 7 Professional. Although the computer was working ok, I installed the FIX It Professional [I bought it to install on my computer to girls] for the interview. Since then, I had several problems with slow MSN Mail and slow performance. I uninstalled the product and to restore the computer to the date of installation of the software. Here are some of the problems I have:

  When you try to run Microsoft difficulty It Center I get a message "the operating system is not compatible and must be XP or newer" which it obviously. I've used this program in the past without any problems and actually have a user account, but it still does not work.

  Trying to access Microsoft support told me that the software is not "enabled" even though it says it's under System properties, and the product number is not saved, even if it has been for more than 8 months.

  Whenever I click on the MSN butterfly, a security message wonder if Explorer is allowed to make changes to my computer. Not a big deal, but remember why nobody liked Vista and I would like to get rid of him.

  A Windows Update does not work due the 8007066f, who doesn't have a solution, but updated logo keeps interrupting my work.

  Thanks for any help.

  I suggest an Inplace upgrade to fix your computer.

  The upgrade in place is a tool to fix the system. Thanks to the special upgrade process, we will be able to repair the system. The upgrade in place will not affect the settings like photos, movies, documents, etc. that are saved on the computer. Although this operation will not remove or modify the files and installed programs, I suggest always that you back up important files before you do. In addition, you may need to reinstall the device drivers after this operation.

  The detailed steps are included as below:

  On-site upgrade
  ====================
  1 log on to the system first.
  2. Insert the Windows 7 DVD in the DVD drive of the computer.
  3. Click Start and select computer.
  4. find the "setup.exe" file in the DVD-ROM and double-click it.
   
  5. click on install now.

  6. When you are prompted to enter the product key, please click Next directly without entering any key. The installation wizard will prompt and ask if you confirm to install Windows 7 without the key and choose please confirm.

  7. When you get to the screen ' which type of installation you want', click upgrade to upgrade the Windows 7 system files.
   
  Note: When running the upgrade on the spot, the system will restart automatically (several times) to merge the files and programs, please leave the computer alone and does not configure it until the 'upgrade on the spot"finished. The system should start Windows 7, once it is upgraded. Once the computer is running "upgrade on the spot", you can go and leave the computer and it completes automatically.

  Let us know if that helps.

• Re: Satellite A65-S1067 - display driver does not work

  As stated in my title, the display (ATI Radeon 7000 IGP) on my Toshiba laptop driver does not work and has not worked for quite a while.

  Whenever I try to play a game that is to install a game (like World of Warcraft or Civilization III) it does not work because it says that my display driver does not work.

  Can someone help me with this?

  Hello!

  You use the factory settings on your laptop computer or you have installed your own version of Windows?
  And have you tried to update the driver? I put t know what OS you use, but the Toshiba site, you can search for a new driver.
  http://www.CSD.Toshiba.com

  And have you tried to update the version of DirectX? You can find on the Microsoft Web site.

  Sorry, but at the moment I can t tell more.

  Good bye

• Satellite P200 accidents + message: graphic card driver does not work properly

  Hello

  hope that this issue has not been covered before, but I've owned a Satellite P200 for 3 years now, and this week, it crashes all the time.

  When it started going down he gave me a few messages in the sense of "your graphics card/driver does not work properly and windows will be arrested to avoid damage.

  It has progressed to the point where now when I turn it on, I have vertical lines running down the screen and the screen flashes on and outside. Within 20 seconds, it restores the BSOD - 'there was a problem and windows will be arrested. Error Page_Fault_In_Non_Paged_Area"then stops.

  I ran a system restore but the problem remains.

  I have a feeling that my graphics card is toast. Is this good? Are there any other options to try? Thanks in advance for any answers.

  Matt

  Hello

  Sounds like the GPU problem.
  But try the graphics card driver update.
  Use the most recent driver for your graphics card.

  In addition, clean the fans of portable computers.
  Dust and debris could prevent the cooling fans to turn with the best speed and this could lead to a higher temperature which would lead to overheating.
  Use a jet of compressed air. I also use it and it helps to get rid of dust and debris.

  If this is not enough, then a problem of graphics chip would be possible.