Drive external DRIVE does not display full disk space

Similar Questions

• external monitor does not display full resolution-_-

  I have a 22.5 in. monitor benq screen 1920 x 1080, but my computer thinks it's a 13.9 in 800 x 600 screen.

  I can't choose a better for the display option.  No I did not choose the mirroring.

  HAAAAAAALP

  These are the windows that show for under views for sys prefs

  

  using one of these

  http://i.stack.imgur.com/zMRsU.jpg

  The dialog box display settings are two buttons: default for display and chipped. Select chipped in the external screen dialog box. This should give you the different options that are available. You can also hold down the option key while clicking on the button of the chipped to see all options, not just the most expensive.

• Problems with my slower... graphic AGA and external monitor does not display

  First of all, let me say that I am not computer savy.  I just bought an Alienware 17 June 1.  Got my AGA and installed a Geoforce GTX 980 inside graphics card.  First I tried as far as I know (which is not yet much about computers) to connect an external monitor to the AGM.  For some reason that the monitor does not display anything and my laptop States there is not all the other monitors it can detect.  Now, the other problem I have is that I run games using my AGA and when its connected I can really see my games download restless and slower.  I thought that the whole purpose of the AGM was pushed my graphics and do amazing things... not very frustrating.  Any suggestions on what I might hurt?

  Try the following:

  Disconnect the graph.

  Uninstall the video card drivers.

  Install the following driver (this version is not in the official Dell support website again, however, it has been tested by our engineers)

  Restart the system and connect the graphic amplifier and test it.

  Please let me know if this helps you solve the problem.

• No luck with CRT/LCD button - external monitor does not display

  Hello

  I have a Dell Inspiron 700 m laptop.  When I connect to the computer to my TV (a/k/a an external monitor), hold down the "Fn" key and press F8 (the "CRT/LCD" button), my laptop screen blinks and no picture on the external monitor.  One of my friends has a Dell XPS M1210 and - through the same steps - we were able to get the same establishment to work.  Maybe someone has any suggestions for what is the problem?  Would be - it simply a matter of obsolete or incorrect drivers?  Thanks in advance for the help and suggestions.

  Kind regards

  Aranas

  P.S. to the difference of the XPS M1210, my Inspiron 700 m does not display again - when I press the key "CRT/LCD" - the box with three display options: integrated screen external monitor and both screens at the same time.  The screen just flashes to black.

  
  

• 2301 x does not display full-screen

  My x 2301 is not display full-screen 1920 x 1080 at 60 Hz on my computer system. graphics card is the Radeon HD5870. Hope someone can help me with this problem. Thank you

  I found the solution for users of cards AMD graphics card. Right-click to open Catalyst Control Center - graphics on the top left corner - computer desktop and displays - there will be an icon of the small screen in the lower-left - click on the black triangle - set up - Scaling Options - slide the bar to 0% overscan - FACT

• external hard drive is not displayed in disk utility

  I have a drive (2 TB) seagate desktop external hard, while the backup time machine HDD power adapter was pulled from the socket. Now the hard drive is not recognized (both on the utility disk and office) of my mac pro book works on os x el capitan, seeing the hard drive is disabled, but I can feel and hear the operation of the hard drive. Also when I hang up my iMac running os x yosemite on the hard drive can be used and seems to work very well.

  I tried to reformat the hard disk, but it has failed it is still not recognized on my mac pro book

  Hello amartnez,

  Thank you for using communities of Apple Support.

  From your post, I see that your drive external hard seagate was pulled from the socket during backup with Time Machine, and now it is not recognized by your MacBook Pro. I know how it is important to ensure that you are able to connect your external drive to your Mac. I have something I want you to try.

  Because the external hard drive seems to be working on another computer (iMac), please try a different USB port on your MacBook Pro and see if it recognizes the external hard drive on the desktop and in disk utility. If so, that means you have a problem with this specific USB port on the MacBook Pro.

  See you soon!

• new computer win 7 pro connected to ext HD or flash drive does not display any permission or not available

  Two hp 17-inch workstations mobile (business) Z book 17

  On consumer laptops, I can view the files on my external hard drive 1 to and 1 GB player.

  On these corporate work stations (mobile), I'm not able to view the files on the hard drive or flash drive.

  I need your help so that I can save files from the internal hard drive of the mobile platform of book z hard disk external.  And I need to be able to reconnect the external drives and readers to the Zbook mobile workstation to transfer files to transfer flash.

  These are the pop ups that appear for each when displaying of readers by opening my computer:

  When left click hard disk drive a pop up appears with the title bar: location is not available.

  H:\ is not accessible.

  Access is denied.

  Make a right click on the hard drive allows opening of the FreeAgent GoFlex drive (H properties)

  The tabs are ReadyBoost, previous Versions, Quota, customize, general, tools, hardware, sharing, security

  By clicking on security of advances and then permissions then continue and then change my name owner or administrator... both methods result in the same access denied result once again.

  I came across this http://technet.microsoft.com/en-us/library/00d04415-2b2f-422c-b70e-b18ff918c281 is this something I need to study and learn before I am able to connect and use an external drive or flash?  Or is there another problem?  If the answer is in this link, do I have to put emphasis on and why wasn't windows 7 configured so that it is easy to use external drives as in win xp and win 8?  Are all usb ports do not or all drivers of failing or is it a software problem all?

  I was not able by trial and error to display all files on any hard drive or external flash on the two books of z of mobile workstation.

  Then I went to the flash drive.

  Left click on the flash drive produces a pop-up with title bar G:\

  You don't have permission to access this folder.

  Click on continue to get permanent access to this folder.

  After clicking on continue it opens another pop-up with title bar G:\

  You have been denied permission to access this folder.

  To access this folder, you will need to use the Security tab.

  When clicking on the Security tab he opens a new pop with the title bar: removable disk (G properties)

  The tabs are general, tools, hardware, sharing, ReadyBoost, customize

  He did not indicate what to do next.

  Summary:

  Two new computers hp zbook stations mobile work with win 7 pro

  Or computers with their multiple ports usb allows to access my external hard drive or flash drive.

  The external hard disk and flash dirve each work very well with the consumer portable computers hp with winning 8 and 8.1 of win and have worked with computers with win xp.

  How can I get the Replicator hp z book with win 7 pro for usb drives work with external hard drives or external flash drives?

  I have so far done the following:

  (1) run administrative guest with sfc/scannow and it found no violations of integrity

  (2) ran microsoft fixit will be all available Parameters which automatically checked and corrected each book workstation z mobile http://support.microsoft.com/mats/windows_file_and_folder_diag/

  (3) contacted HP support

  (4) checked for malware using microsoft security essentials, malwarebytes and spybot on each mobile workstation

  (5) updated drivers using HP support assistant on each computer

  (6) windows update the device HP support assistant on each computer

  How do two new computers with win 7 pro can be connected to external drives that allow to view the files as they do with win xp and win 8 automatically?

  How can I access my files on the external hard disk and flash the mobile workstation book z?

  The specifications for the mobile workstation of zbook are:

  Operating system: Windows 7 Professional 64-bit Service Pack 1

  Microprocessor: Intel core i7-4800MQ CPU @ 2.7 GHz

  Moemory system: 16 GB of memory on 2 1600 MHz dimm

  Graphics device 1: Nvidia Quadro K3100M

  Graphics device 2: Intel HD 4600 graphics card

  Hard drive 1: SCSI Disk Device

  C: 683.42 (613,62 free go-go)

  D: 12.21 GB (1,3 GB free)

  E: 1.99 GB (1.97 GB free)

  The hard drive is a seagate 1 TB drive that works very well

  The flash drive is a 1 GB drive which works very well

  Here is the new mobile workstations HP Z book 17.

  Microsoft said that HP is responsible for the operation of win 7 in the first year for the operating systems pre-installed

  HP elite support doesn't know how to solve the problem with the USB ports on the two books of Z is not able to provide access to external hard drives or flash drives

  These two mobile workstations have problems of USB port with all the ports on each computer?

  These two mobile workstations have problems of windows 7 where the client has to learn how to use the registry to store external hard drives internal hard drives?

  What does do to be able to back up files on a disk external hard drive internal?

  Have to do to be able to use flash dirves with a 17 mobile workstation z book?

  This problem has been resolved.

  The book of Z 17 HP installed their software: HP Client Security.

  This software prevents the use of external hard drives and flash drives in its default settings.

  Each customer is on their own in discoverinv and the resolution of this problem.

  There is no warning.   He made no information on why a right click on a drive and checking the property do not work.

  The way in which this issue has been resolved was by a clean boot process in msconfig.

  When miscrosoft services were hidden items that remained were read.  Systematically, some were checked and unchecked, and the computer has rebooted to see if the problem was still in existence or if the problem has disappeared.

  Whenever the hard drive or flash drive has been verified.

  We were lucky that we checked to see if it was or not HP software at the beginning.  This problem was caused by the default client security HP who were to refuse all USB connections.

  This consumes a lot of time and was so frustrating.

  On the first book of HP Z 17 thin client HP security biometric authertication failed with a black screen.  The computer is about 15 days old.    All the dirvers for the HP notebook have been uploaded and then the software for biometric devices have been downloaded.  HP determined that it was a hardware failure of the biometric device, when drivers and software downloads together has not fixed the problem.  This computer had / has the same problem with not allowing communication with any external hard drive or flash drive.

  HP did wrong by not providing any information on the inside of this product the HP support assistant.

  Here's a consumer might encounter problems:

  The HP support assistant on Z book provides updates of drivers for windows, but the support phone number book mobile z is not listed.  There is a phone number, but it is a regular support, not z book mobile support or elite support.  Mobile Z book users are supposed to call the number fo elite press and the number is for a regular support on the wizard of book z mobile support.  Support assistant has cat support method and the HP chat support is not trained to book support z mobile.  There is a feature to contact the technical support and the transfer of data to the technician, and again, it goes to regular support who is not trained to support the mobile z book.  If you call the phone number provided some of the choices on the automated line includes desktop, laptop and office work.  If you choose Notepad you won't get z mobile workstation support.  If you choose work center you will get no support of z book mobile workstation.  Instead, you must have someone answer and then ask to be redirect to support elite.  On the first call, you never know that the support you are looking for is elite support until they give you this information on the next contact.

  After many hours spent barely pull on the problems of not being able to view files on an external hard drive or external dirve flash, I was able to change this HP software.  It now unfortunately produces a humming noise when parts of it are displayed.  This has not yet been set.

  It is the customer of HP security information:
  
  http://www.HP-ProtectTools.com/downloads/PDF/HP_ProtectTools__EnterpriseDeviceAccessManager_Whitepaper.PDF

  There was no information to reconfigure the software in the white paper.

  I was able to find a user guide.

  This guide was not and was not available through the HP support assistant:

  http://h10032.www1.HP.com/CTG/manual/c02292692.PDF

  Hope this helps all who are unable to view the files on their external hard drives and external flash drives.

  The thin client HP security prevents click right change of ownership and prevent changes, right-click in the security, etc..  Change of Director fails also as the client security administrator HP overides too.

  So end users must change the HP Thin Client Security so that it does not block access to files on external hard drives or flash drives.

• cdfs.vxd, cdtsd.vxd and files cdvsd.vxd missing in Vista Home Premium for CD drive does not recognize the disks of data-help

  Cdfs.vxd, the cdtsd.vxd files and the cdvsd.vxd are missing in my Vista Home Premium 32 bit system. ask if you can make me the same thing that my CD/DVD is not capable of reading/writing data discs

  Hi Anirbang,

  ·         What exactly is the problem you are having?

  ·         You receive an error during execution of any task?

  If the drive is not able to playback a disc then follow this article and see if it helps.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs

  Respond with more information so we can help you best.

• Install hard drive does not display complete space after failure bootcamp

  If this problem is shallow, but I did a ton of research, and I'm stuck.

  I tried to install Windows 10 with the BootCamp assistant and there was a mistake and restarted my MBP (mid-2015, 2.8 GHz Intel Core i7, 16 GB 1600 MHz DDR3, 1 TB SSD). Upon restart, the partition of windows seems to be there, but when I tried to start Windows (restart now option key), I found myself with only one option, which was to start in Mac OS X. Fine. So I started in Mac and went to the wizard bootcamp again and this time, I had the option to remove windows, so I did, which was good, because I was going to just to try new BootCamp assistant...

  -BUT (here's the point of this post)-

  After the deleted bootcamp windows partition Wizard, my Mac partition was left on its reduced size, which is 901,34 Go (before "assistant" training camp, I got 999,35 GB, it's a 1 TB drive).

  I did a lot of things to try to remedy this situation, but nothing seems to work:

  -J' resized the partition in disk utility (which continued to give me errors, until I turned off FileVault), so now my SSD shows only a single partition to 1 TB in size.

  -J' tried to run first aid on both the disk (SSD Apple) AND partition (Sean HD), but which shows all go well.

  -I went through the Terminal to run the/dev/disk0 repairdisk diskutil command and it seems that the partition plan seems to be OK.

  I would avoid using testdisk, because I think I would mess something up, but if I have the right direction, I could predict the future.

  I DON'T want to format the drive and start over, because I would be really sad to have to reinstall/remake ~ 800 GB of things again (I am a music producer). And, Yes, I backed everything up, but again everything is too tedious (do once was quite tedious as it may be).

  

  You notice you have a recovery of 98 GB of HD, which is usually about 650 MB? What were the exact steps you have taken to address the issue that you have after that BC did not work correctly? Did merge partitions incorrectly?

• Hard drive is not displayed full size

  Hi all... This is my first post in the forum and hope to share details on the problem that I am facing with my portable Smart Touch PC envy.

  My Lptop configuration is as follows:

  

  The problem started when I went to a recovery of windows from the HP Recovery Manager. Initially, before my C drive recovery showed as a space of nearly 500 GB.

  When I went for a recovery the first time she abandoned and then again started the recovery, which succeeded. But to my surprise, it gave me two options to start in one was Windows 8 and the other HP RM (ESP). As usual, I chose 8 Windows and the laptop started fine, but to my surprise I saw that my C drive was reduced to 80 GB instead of the 450 + GB of space I had earlier. I searched the net and found that HP RM (ESP) was another partition and I could delete it by typing msconfig and then switch to the tab startup and remove the HP RM (ESP) OS and just delete. It also worked well for me, but I am still unable to use the full of the hard drive I have. Support HP can tell me what I need to do to recover the complete HD drive.

  you need to expand your partition to occupy unused space.

  Run > diskmgmt.msc > enter

  This will bring up the Disk Manager. Right-click of the 80 GB partition and expansion through empty space.

• iCloud drive does not display files or photos. I need to my iBook in the cloud drive files, please help.

  iCloud drive shows the storage used on the files of the iBook and pica, but I can't access via iCloud Drive. Why is this? How can I solve this problem?

  on icloud drive, I have only two files that I saved from my e-mail, but I want to iCloud Drive to synchronize my files to the iBook.

  Anyone?

• HP 14-g008au: driver does not display hp 14-g008au

  
  

  Hello:

  I have no problem to access the page W8.1 of the driver for your laptop.

  http://h22207.www2.HP.com/us-en/drivers/selfservice/HP-14-G000-notebook-PC-series/6545560/model/7234357

  You must use internet explorer 10 or 11, or support pages don't work well.

  According to the list of parts for your model, it uses an AR9565 802.11bgn 1 x 1 WiFi and Bluetooth 4.0 adapter Atheros WLAN combination.

  There is no pilot, even appearing on the support page for this wireless card.

  In any case, here are direct links to the free wireless and bluetooth drivers, you must...

  http://h20564.www2.HP.com/hpsc/SWD/public/detail?sp4ts.Oid=5405166&swItemId=ob_148180_1&swEnvOid=4158

  http://h20564.www2.HP.com/hpsc/SWD/public/detail?swItemId=ob_145288_1

• Does not display full RAM on reboot

  ASUS desktop 64-bit Intel cpu, 9 gig RAM, Win 7 Home premium. When I do a start hot (reboot) it recognizes only 6 gig of RAM? It will show 9 concert most of the time on cold start. ASUS could not help.

  "ASUS could not help."

  It's a strange Setup RAM. How you have configured 9 GB of RAM?
  All sticks have the same plug eg-timings & voltage?
  Specify what suggestions were made to ASUS, and what have you done for
  remedy the situation.
  Also include the specification of your processor and motherboard.

• create asm diskgroup does not display any disk

  I want to install oracle grid and the database on a cluster 2 nodes

  I use virtualbox, oracle 6.5 and grid oracle 12 c

  I have created my asm disk. I can't listdisks and also perfectly scandisks

  I install the software of grid with the oracle user.

  I have chown-r oracle: oinstall oracleam to give permission to the user oracle the disk

  all by installing am on the Group of disks asm 'create '.

  for the love of me, I can't find my records.

  oracleasm, oracleasmlib and oracleasm-supported are all installed. checked with rpm - qa} grep oracleasm *.

  How to solve this

  Thank you, this has been resolved

  CD/dev

  chown-r oracle: oinstall oracleasm

• My netbook does not read my disk even if his reading of my external hard drive and the dongle

  My netbook does not read my disk even if his reading of my external hard drive and the dongle

  Hello

  1. what operating system do you use?

  2 did you change on your computer?

  3. did you receive an error message?

  I suggest you to follow the links and check out them.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs

  http://support.Microsoft.com/kb/982116

  Your CD or DVD drive cannot read or write media

  http://support.Microsoft.com/mats/cd_dvd_drive_problems/en-us

  Hardware devices do not work or are not detected in Windows

  http://support.Microsoft.com/mats/hardware_device_problems/en-us