Drive external HARD Toshiba PX1267E - 1 32 cannot be properly detected/installed

Similar Questions

• Drive external HARD Toshiba PH3064U-1EXB turns off itself

  I have an external hard drive PH3064U-1EXB, that it will stop auto when you use it.
  It will also and when I go to retrieve a file he then will power off.
  But it can be used for an hour because I'll be working files and or pulling them consistently and for no reason, it will fit into the deep.

  Can someone help me please...

  Honestly, the power button seems to be sub par and maybe that is the issue BUT there is no rhyme or reason to the power down.

  Thank you in advance.

  > I just received delivery of the external hard drive. Unfortunately, the power supply provided is incorrect - 5 volt
  In your case I would recommend you contact the dealer and for this clear with the dealer, you should get a new HARD drive with the right diet!

• Drive external hard USB - cela used to work now I get an error message = "this device cannot start. (Code 10) "Any suggestions?

  Drive external hard USB - cela used to work now I get an error message = "this device cannot start. (Code 10) "Any suggestions?

  Hello

  I suggest to refer to this link and follow the steps in this link and check if that helps:

  http://support.Microsoft.com/kb/943104

  It will be useful.

• Cannot access the files from the internal hard drive that has been converted to drive external hard after the motherboard is dead

  I can't access the files from an internal hard drive that has been converted to drive external hard after the motherboard is dead. I think that my files are still there, as shown in the volume of the player volume ~ 500 gb which is almost completely full. But I can't access most files, including documents and settings. When I took 'ownership' of the folder, I could open the TI but then it showed everything that was in my documents and settings on the computer file I used to open it, not the documents of the car.

  I can't access the files from an internal hard drive that has been converted to drive external hard after the motherboard is dead. I think that my files are still there, as shown in the volume of the player volume ~ 500 gb which is almost completely full. But I can't access most files, including documents and settings. When I took 'ownership' of the folder, I could open the TI but then it showed everything that was in my documents and settings on the computer file I used to open it, not the documents of the car.

  Uhm... I think the issue here is a misunderstanding of what you watch.

  If you want to access your files from the old hard drive - you need to look in the right place.  If the old system was "Windows 7", "Documents and Settings" is the * wrong * place to look and "Users" would be the place to go.

  You * will * take ownership and change permissions on ALL (you want to propagate to all subfolders/files when do - to save time) in order to get them properly.

  New-->: Windows Vista/7 would have your files located in the directory 'Users' of the root of the drive - and then under your username.

  • \USERS\\Desktop\
  • \USERS\\Downloads\
  • \USERS\\Favorites\
  • \USERS\\Documents\
  • \USERS\\Music\
  • \USERS\\Pictures\
  • \USERS\\Videos\

  ... etc...

  Documents and settings to WIndows Vista/Windows 7 is a symbolic link and would lead to what you see if you tried to use it.

• Satellite A200-1If - drive external HARD after a while is "unknown device".

  Hello!

  I have such a problem: I work with my external case alu Toshiba 3.5 HDD 500 GB and after awhile of copy of the files in the laptop it disappears and appears this luckily device recognized.
  Can it be caused by not enough power in the USB port?

  THX for any help or the workaround

  Hello

  Yes, this may be caused by the fact, there is not enough power provided by the USB port. first of all, note that external USB hard drives 3.5 inches are generally designed to be used with systems of office due to their higher power needs (this is also the reason that many need an external power supply of their own). my suggestion would be to buy a 2.5 inch drive external hard USB is designed to be used with laptops. Another reason that the hard drive may disappear when copying files, is that there may be a problem with the connection of the USB cable between the laptop and the external HARD drive. I suggest to check that both ends are connected properly and not put any pressure on the cables and keep them stable.

  I hope this helps you with your question

• Drive external HARD encrypted in ExFat?

  Hello

  I have a new drive external HARD I need to use on a Mac and a PC. I need to access the same files (data analytics), so I don't want to make 2 partitions and have duplicate files. What I've read, it seems that ExFat is the best option for this (they are large files, so that the FAT will not work). My work, however, requires external hard drives to encrypt. When I tried to put it on my MacBook Pro (El Capitan), however, I received an error.

  My question is this: is there a way to meet all three of these criteria?

  (1) disk encrypted

  (2) read/write on a mac

  (3) read/write, the same files on a PC

  I have a separate HARD disk for Time Machine, I use an airport. This disc will have to travel with me.

  Thanks in advance!

  If you were able to encrypt it using the built-in OS x software, Windows would not be able to decipher. If you use a Windows build-in encryption software, OS X would not be able to decipher.

  You have to find a 3rd party package that works on BOTH OS X and Windows, which can encrypt and decrypt on both platforms.

  In the past, I would have done TruCrypt, however, he was abandoned by unknown original authors, but there have been a few replacements based on the original source of TruCrypt.  Try googling 'TruCrypt Alternatives' and you might find something where they support the OS X and Windows.

  Otherwise, you will need to find another cross platform encryption package.

• Connection drive external hard am.

  Hello world
  I wonder if it is possible to connect the drive external hard am to z3?
  In the light of others do it on the other android device. Got an otg cable, plugged my HDD but the phone is not supported it or I'm doing something wrong.

  Any help with this would be appreciated.

  Yes, you can check what file system that is used if you connect to a PC, right-click on the drive in the Solution Explorer and select Properties.

  It is possible to convert NTFS to FAT without deleting all data, but I do it without the first run a backup in case something goes wrong. And if you have files bigger than 4 GB it will be problems with these as FAT32 does not support that. exFAT supports, but I didn't know of any tool that can convert NTFS to exFAT without wiping the drive.

• drive external hard when it is connected to the computer says hd not formatted want format you?

  drive external hard when it is connected to the computer says hd not formatted want format you? but it works fine on my other pc, the problem start when I installed registry booster please help thanks

  Hi keo1,

  We recommend that you connect the drive to a different USB port. Also run the disk check for errors.
  See check your hard drive for errors

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Cannot access the drive HARD Toshiba PX1267E - 1 32 - file ONSPCCH.ini problem

  I have a Toshiba PX1267E - 32 1 external hard drive as well. It was working fine with my Vista Home Premium OS and has all my data backup on it. It has been password protected.

  My desktop HARD drive failed last week and was replaced and an old recovery disc of 12 months used to rebuild.

  I then tried to access the external HARD disk to restore the backup I ran the day before the accident, but when I enter the password (that I know is certainly correct) I get the same error as others posting here. He suggested that the input data does not match the information contained in the ONSPCCH.ini file.

  I can't disable or change the password as will erase all the data on the external HARD drive. The previous messages direct me on the site of Toshiba, but the options to download an updated driver is no longer correspond to the options available online.

  Help, please! :-(

  Paul

  Hello

  Strange what s...
  But someone pointed out that he could solve the issue with another USB cable. Did you check that?

  It s worth a try! ;)

  Welcome them

• Cannot find the backup store in DOCS n Toshiba drive external HARD to PIX

  Hi guys,.

  a few days back I have backup my loads of PIX and Documents TOSHIBA external HARD drive (3.5-inch USB 2.0 Black + Silver HARD drive, 2.5-inch USB 2.0 HDD Black + Silver) in-store "My PIX" and "My Documents" backup of your laptop. Now I'm trying to restore it on another laptop but I can't find them through TOSHIBA REGEN backup software. But first I couldn't find my music store of movies but the itch to get through 'repair catalogue' in the software... Has anyone asked similar problem as I do? Any help of suggestion will be highly appreciated.

  Thanks in advance!
  Nukesh

  Hello

  To be honest I m no owner of these HARD drives.
  But I wonder why you use the backup store to retrieve files

  Why you n t access HARD drive and just copy and past the files to another location

• Cannot see all files on external drives (external HARD drive / flashdrives)

  I do not see any folder on my external hard drive, I know that these files exist because it still shows how the same amount of space remaining left on this drive. Is the same for all flashdrives I plug it into my laptop

  Edit * directories to the folders still exist, I can access when I type in my address bar, but I can't see the icon to click on it.

     

  Hello

  Windows 7 sometimes has trouble seeing external drives. Found one potential than me and other solution is to download and install the freeware Aomei Partition Assistant application, download it here: http://download.cnet.com/AOMEI-Partition-Assistant-Standard-Edition/3000-18512_4-75118871.html?tag=mncol;1 (only use the Direct download link).

  Once installed, go to the readers in question and one both select and select Properties. It is her, no formatting or partitioning required. Just select the drive is often enough to get Windows 7 to recognize.

  Post your results here and let me know how you fare.

  Kind regards

  BearPup

• External HARD disk PX1267E not recognozed Windows 7

  Hi all
  Please help me with my external hard drive connection for the new laptop with Win7 on it.
  Password is disabled, but windows keep telling me it cannot recognize the device. Also, I have not found any drivers for win7.
  Thank you in advance!

  Hey,.

  The external HARD drive is recognized in Windows disk management?
  -> http://aps2.toshiba-tro.de/kb0/TSB7101OB0006R01.htm

  If the HARD drive is new, you must first format, and you must create a partition at least.

  Check it!

• PX1393E drive external HARD not visible in windows Explorer

  Hello world

  I just bought an external DRIVE for my Toshiba laptop no disc PX1393E. I know that its old and he still has windows 2000 SP4 on it.

  Now my problem is that my laptop does not recognize the external HARD drive. The Add New Hardware Wizard works fine, but I don't see the new drive in windows Explorer.

  I looked in the FAQ of the guide. Here, I tried to go into the options of storage since rigt - click my computer in the management options. But I still don't see the drive.

  Now, I wanted to see if I could find some update of the driver or something, but man you can't find on this site.

  Anyone?

  TIA

  The drive cannot be partitioned or formatted.

  Reach:
  Start-> Control Panel-> administration-> computer management tools-> Storage-> disk management

  Initialize the disc and create a partition then format it in NTFS

• Impossible to mount the drive external HARD under Ubuntu Linux - file system damaged and MFT

  I get the following error when I try to mount my external hard drive on my Ubuntu.

  UNABLE TO MOUNT
  Error mounting/dev/sdc1/media/khalibloo/Khalibloo2: command-line ' mount t 'ntfs' o ' uhelper = udisks2, nodev, nosuid, uid is 1000, gid = 1000, ask dm = 0077, fmask = 0177 "" / dev/sdc1 "" / media/khalibloo/Khalibloo2 "' came out with the exit status no lame 13: ntfs_attr_pread_i: ntfs_pread failed: input/output error".
  Cannot read MFT, mft = 6 count = 1 br = - 1: input/output error
  Could not open the FILE_Bitmap inode: input/output error
  Failed to mount ' / dev/sdc1 ': input/output error

  NTFS is incompatible, or there is a hardware failure, or it's a SoftRAID(4)/FakeRAID hardware. In the first case run chkdsk /f on Windows, and then restart Windows twice. Using the /f parameter is very important! If the device is a SoftRAID(4)/FakeRAID then frst activate and mount a different device under the/dev/map/directory, (for example/dev/map/nvidia_eahaabcc1). See the documentation for 'dmraid' for more details.

  It is not mount on windows either: "i/o device error".

  This is a disk with a single partition hard ntfs

  Of course, I tried chkdsk /f. reported several file segments as unreadable, he didn't say if he fixed them or not (apparently not). also tried with the indicator/b.

  ntfsfix reported as corrupted volume.

  TestDisk was able to correct a small error with the partition table by adding the '80' for the active partition indicator (only). TestDisk also confirmed that the boot sector was very good and it corresponded to the backup. However, when you try to repair the MFT, he could not read the MFT. He could not also the list of files on the hard drive. It says file system may be damaged.

  Active @ also shows that the MFT is missing or damaged.

  I tried to replace the USB cable. Has not changed anything. I tried to update the driver. Windows reported that he was already up to date. Yes, the pilot has been activated.

  So, how can I fix the file system? or MFT? or the I/o device error?
  I used the HARD drive for months. This problem started 2 days ago. I also tried to mount it on other computers, without success.

  Hello

  I'm sorry to read about problems with your drive.
  Unfortunately, I think that the question is misplaced a bit as your case appears to be the health of your rather external HARD drive that a specific problem related to Linux.

  To add clips, if the tools you use have failed to fix your drive, then I do not think that a user 'normal' forum will no longer.
  I know it's a fine recommendation and probably just add salt in your wounds: If you really care for files, do a sector backup before doing any file system / partition own modifications.
  The reason is very simple - if the tool you use has made a mistake when judging what actions are the right ones, and submit these changes, you move your goal - and fast!
  Instead of repairing, the tool can simply corrupt data even further.
  Any subsequent change aggravates the disorder exponentially.

  Judging by the details in your message, I'm sorry to say that I think your drive is defective, or at least the data is lost.
  Of course some companies will probably be able to restore it, but that normally costs a fortune.

  Unless you are willing to spend astronomical amounts of money on data rescue, so I suggest to accept data loss and look at what you can do with the HARD drive.
  Try to format. No problem, this indicates the drive is defective and must be replaced.

  Sorry for so little help.

  Tom BR

• Drive external HARD identified as removable disk

  Hello
  I have the Toshiba 593500 - B 750 G external hard drive and I can't access my files stored on it. It's a USB 3 drive.

  When I plug it I get the added device, but the drive appears in my computer as a removable disk and I can extract is no longer my file.

  The drive activity light does not light, but the car turns.
  I tried this drive on several different computers with the same results.

  I changed the drive letter, the same result. I uninstalled the drivers, the same result.

  Help, please.

  > I have Toshiba 593500 - B 750 G external hard drive
  What HARD drive you exactly, because this isn t number I known

  Another question: could you access the HARD drive and the files in the past?