HP 15 laptop: DRIVE HARD DO PARTITIONNE NOT VISIBLE AND INITIALIZATION is NOT POSSIBLE

Similar Questions

• Satellite A660 - 11 M - drive HARD recovery is not possible

  Hello.

  I bought the satellite A660 - 11 M two months ago. A week before, he started to cause a problem that when turned on, boot HARD drive is not possible in the first place and boot priority option page is shown. Only after that I have reset a start command, it started.

  To resolve this issue for good, I decided to format the HARD drive using the HDD recovery procedure. Unfortunately, I had to cancel this procedure after 2 minutes, and the start-up is not possible at all since then. He continues to display the message "Boot failure" etc. and staging to the BIOS screen. So, I can not access the recovery procedure even if I keep the F8 key. I am afraid that a recovery on the HARD drive partition can have been damaged due to the forced cancellation.

  I have not created a DVD of my own laptop recovery, and the only option seems to buy one from Toshiba (https://backupmedia.toshiba.eu/landing.aspx). Before you order a recovery disc, I would ask if my problem can be solved using the disc. Anyone who has experience with the recovery disc could advise me? Another question is to know if a standard warranty let me send to Toshiba ASP? Thank you for reading.

  Hello

  > Another question is to know if a standard warranty let me send to Toshiba ASP?
  Warranty only covers hardware issues.

  Question you seems to be related to a software problem.
  Therefore, I doubt that installation of the OS would be covered by the warranty.
  You should order the recovery disk and must attempt to define the notebook back to factory settings.
  Then you should check the features of the laptop.

  Good luck

• I formatted my laptop and my drive hard (D :) is not opening! HELP PLEASE

  I installed Windows 7 on my laptop (upgrade). I deleted the first partition (100 MB) but could not remove the part containing the windows (C drive). I continued the installation

  Result: A new copy of windows has been installed, but the old windows files have been saved (windows.old). I deleted this file.
  but this isn't the BIG PROBLEM
  My problem is that my drive hard (D :) is not opening. When I click on it it says D:\ is not accessible. Access is denied.
  
  
  It contains all my important files! I didn't intend to get rid of it!
  Help, please!
  
  
  PS: I used a program called RecoverMyFiles v5. This is for ntfs recovery...

  Hey I found the solution. I went to my computer, the drive hard D properties, security and added my user name... so it's it.my files r rear access is not denied more :)

• Drive HARD recovery does not not for Satellite Pro L450D-12 x

  I have a laptop that I'm fixing for a friend.
  According to toshibas official specification it is than a HDD recovery partition which is hidden.

  For a reason unknown to me, now the 0 (zero) key does not work. F8 does not work either and the windows system restore does not seem to get me there either.

  Can someone please explain to me why this is happening?
  Nobody ever touched the hard drive on the alleged recovery hidden partition which is toshibas official specs 100%...

  Anyone share a few ideas with me here please

  Kind regards
  Andrew

  Hello

  The HARD drive recovery partition is not hidden
  In my case the image files when placed on the second partition in Toshiba HDD folder.

  However, the fact is that HARD drive recovery could be launched by pressing the F8 key, and then choose the option called repair my computer and in a new window the recovery HARD drive option should be chosen.
  If this is not possible, then you will need to retrieve the laptop using the recovery disk.

  I guess that this disk is not created in the past. Right? You can create the disc using the recovery disk creator which is preinstalled on all Toshiba laptops.

  If this is not possible, then you must order the CD here:
  http://backupmedia.Toshiba.EU/landing.aspx

• Drive hard WD Passport not able to detect Windows 7, only the PC restart can work

  Hello:

  I have 500 G WD Passport hard drive. My laptop Dell Win7 64-bit not able to detect it. It does not appear in Device Manager, and disk management. When I show the hidden device, I can see the driver properly installed passport but windows says no device detected. The work around I have to plug my passport for PC and then restart my PC every time. I have no problem with an other laptop Win7, but I don't remember now if it is a machine 32 or 64 bit. Can anyone help?

  Thank you.

  Lin Chin

  Hi MightyMiro_WD:

  Just to say the good news before the explanations below. Your method worked partially. :-)

  I followed your instructions as below:

  1. I go to control panel-> device-> Universal Serial Bus controllers Manager and uncheck the "allow this computer to turn off this device' for everything USB with this option: Hub USB root, Generic USB Hub, USB Hub 2.0 MTT and etc.

  2 insert the disc WD Passport to my PC. PC cannot detect. Then I insert USB so that my WD Passport always connected. The PC is able to detect the key USB and WD Passport.

  3 eject my USB. My WD Passport must always be able to be detected by the PC, even I Plug and unplug several times.

  4 remove my WD Passport and connect to another USB port. PC cannot detect. Insert my USB then my WD Passport always connected. The PC is able to detect the key USB and WD Passport.

  5 eject my USB. My WD Passport must always be able to be detected by the PC, even I Plug and unplug several times.

  6 now I plug/unplug my WD Passport to one of the 2 USB ports without my USB connected.

  I then in Power Options in Control Panel to change "USB selective suspend settings" to "disabled". The "turn off hard disk after" has already been fixed forever. Made the start of the procedure from step 2. And behavior are the same from step 2 to step 6.

  I restarted my PC, just in case the changes I did for Device Manager settings to take effect. BLUE SCREEN came out so that the closing of my PC. Do not remember the exact error message. After you restart, done at the beginning of the procedure from step 2. And behavior are the same from step 2 to step 6.

  Then I restored the changes to 'allow this computer to turn off this device' for all USB items except USB root hub. Just to see if a single USB root hub has been changed, it gives the same result. I also restored the "settings USB selective suspend" "Enabled". I restarted the PC after that. BLUE SCREEN again. Do not remember the exact error message. After you restart, done at the beginning of the procedure from step 2. And behavior are the same from step 2 to step 6.

  At this point, I wasn't looking to cancel all changes back to the original and do like to see if it still works as it is.

  Conclusion, your method worked partially. I don't know why the WD Passport cannot trigger the PC to recognize by itself for the first time after restarting the PC. It needs USB key to accompany. But I'm happy now. At least I do not need to restart my PC now. :-)

  Thank you.

  Kind regards

  Lin Chin

• Drive hard USB is write protected and will not run backup

  After the upgrade from Vista to 7 I formatted a drive hard Maxtor Plus and backup is complete with image.  A week more later in a attempt to a backup I received a message that the backup failed, disk is write protected.  I tried to take possession through the prompt command > takeown /f e: and received message disk is write protected.  Formatted drive in another computer with XP, then windows 7 machiene always write protected. Attempted to seize properties.  current owner is a numerical value of the letters about 35.  Will not let me take ownership as administrator again tells me disk is write protected.  Is it possible to remove the write protection this drive E:

  Thank you for your response.  It was not a strategy of storage devices in my registry.  I tried to create it manually. I was able to get a folder, but the value is default.  Not believing that I could create the key correctly, that I resorted to restore my system before the first backup and I got access to the external drive at this time.  I will install a new backup and hope that I find not write-protected again.

• drive hard Dick can not be explored

  the problem is when I want to explore my drive hard does not me and it does not appear on my computer but it appears on the printer and Devic as a USB to SATA bridge. Why im not allow exploring my hard drive?

  the problem is when I want to explore my drive hard does not me and it does not appear on my computer but it appears on the printer and Devic as a USB to SATA bridge. Why im not allow exploring my hard drive?

  It appears in disk management with or without a drive letter?

  I guess that it is an old internal hard drive you have connected to a third-party device so that it can be used as a USB?

• Drive hard internal are not not in devices

  I just upgraded to El Capitan.  What I notice is that one of my internal drives appears on the desktop, but not in my list of devices when I try to save a file, or if I double click on the MacHD and look at the list of devices it.

  Suggestions, please!

  Open utility disk from the Applications\utilitaires folder. If you have more than one drive in your computer (not more than one volume on one disc), then take a snapshot of the utility disk with the selected out-bumpy drive entry window and the other with the entry of the volume back to this same disc. This only for the disk with which you have a problem.

  To post a screenshot

  1. Press command + shift + 4 , which will change the cursor to the line of sight.
  2. Hold down the mouse button and the collimator allows you to select the part of the screen you want to capture.
  3. Release the mouse button and the image will be saved on your desktop.
  4. Click on the camera icon in the toolbar of the message forum Editor.
  5. Drag the image on the button Select a file and click the Insert button.

• External Toshiba drive HARD PX1268E - 1 40 guard and reconnection (Win 7)

  Hi all

  I used to run my drive external HARD with a laptop with the Windows XP operating system and another laptop with Windows Vista. My new PC running Windows 7, and the external HARD drive worked fine for a few weeks. However, when I connected the HARD drive to another laptop with Windows Vista again transferred some data and then reconnected to my PC with Windows 7, the HARD drive wasn't working much more. He keeps now disconnect and reconnect after about 6 seconds. The HARD drive is not secured by a password.

  Again, the HARD drive works fine with the laptop, but keeps in a closed loop when it is connected to my PC. How can I solve this?

  Best regards

  Stefan

  Hello Stefan,

  And what do you always do to solve this problem?

  It works when you turn off the HARD drive and then turn on again?

• Satellite L670D pirate, drive HARD recovery does not work

  Hey guys,.

  you have the following problem: My L670D hacked by some * s and now I'm still trying recover the power. I heard about Toshiba HARD drive recovery, which should work by pressing F8 during startup. I tried several times, but I think something went wrong and nothing happened.
  Can someone help me by telling me where my mistake is? I want to just my laptop back!

  For those who encourage me to install Windows again: I have not any DVD, cause he was already on the laptop when I bought it (Win 7 64-bit).

  Please please please help me!

  Merry Christmas to you all!

  Gr4phixX

  Hello

  As described HARD drive recovery work on follow Toshiba document -.
  http://APS2.toshiba-tro.de/KB0/HTD1303440001R02.htm

  Try to please and send some comments.

• Drive hard ext appears not

  Hi all

  I'm trying to solve a problem with a hard drive. Yesterday I plugged it into a computer and everything worked, I saved all my files, it ejected safely and put it in my bag back. Today, I went to work on other cases and it is plugged. It does not appear on the computer or disk utility. I tried on 3 different computers, as well as using another cord. I tried all the courses of action on other forums of Mac, but nothing has worked. The hard disk itself seems to work - the unit makes noise when it is plugged properly - but does not at all appear.

  Any help would be great. The drive cannot be cleaned because she important data on this subject.

  It does not appear on the computer or disk utility.

  The next thing to look at is if it seems about this mac >... > report... under SATA or USB.

  If this is not the case, this is often caused by the failure of the interface card, not the drive itself. Move the reader to an adapter or a different case, it can bring back to life.

• Wireless laptop drive HARD Toshiba 1 TB Canvio Aero Cast - warranty issue

  Hello

  I brought toshiba portable hard drive 1 TB canvio aero typecast sharaf DG store in Dubai 22 wireless, February 2015 and the India m.

  I asked the saleswoman who will get warranty on the product in India and they said yes
  so I brought the canvio but when I used the product yesterday for the first after seeing the online tutorial I was shock as long as the battery light does not appear when I put it in charge

  as recommended by the company and I cross check the wire with the other hard drive, so it was check that the charger n cable works but there is a problem with the hard drive

  so I called the service the customer in India, but they aren't for all proceeds from the outside India.
  I don't know what to do.

  It will be respectful if the toshiba company representative can solve my problem.
  future prospects for the positive response

  Hello

  I think first of all you must check the information contained in the warranty booklet which should end in the area of the HARD drive.
  Why? Because as far as I know, Toshiba hard drives are covered with a valid, standard 2-year guarantee from the date of purchase

  Here are the details:
  http://www.Toshiba.EU/contents/Toshiba_teg/EU/others/SW/WL_HDD.PDF

  You will also find this info:
  This warranty is warranty return service and is applicable only in the EMEA (Europe, Middle East and Africa) region where the Toshiba or its authorized service providers.

  Unfortunately, this means that this collateral standard isn't available and valid in India

  I think you should contact the retailer for Dubai because the dealer did not provide you the correct information on the warranty.

• Drive HARD secondary is not recognized

  I installed a new secondary 250 gb HDD in my counter top, but the computer does not recognize it. Help, please?

  Right-click on my computer, go in manage, go to disk management and find the 250 GB hard drive.  There's likely to be a black color.  Right-click on the drive and select initialize.  Then right click on the black section and select format.  Follow the prompt on the screen.

• Drive hard USB are not not in my computer

  All of a sudden after a reimage my Windows XP, my external Maxtor OneTouch usb hard disk drive d: is not yet in my computer, where it has always been. I see the c: drive and the CD/DVD drive e:, but not the d:. Why not? It is not found except in my computer > properties > device listed under disk drives Manager. But if I click on my computer, it is not shown and the disks c: and e:. It is plugged in USB and power cord. A light is on the front. But I do backups on this disc and suddenly impossible since "exists". I'm losing it? Why it is not in my computer? I need to access this disk so I can restore my backup to my Docs.

  I got a new computer with XP installed.  My last computer was XP and this 500 GB LaCie external drive worked fine.  Now, he does not appear in 'My Computer' but it appears as unknown in Disk Manager.  How can I get my computer to read this disc?  He has my back up files it contains...

• Drive hard internal does not appear in Device Manager or disk management, but IT IS there.

  According to disk management and Device Manager, I don't have a C in any case, a HD partition at all. (I mean on an internal hard drive) So of course, I have a HD since im typing this now. Laughing out loud. the computer seems to know it's got a HD, because it starts very well, but he can't see it. In addition, I can see it in Explorer and see all the folders and files, but that's all. Everything works as usual. What can I do to fix this?

  I have Windows Vista Home Premium, 232,88 GB Hitachi HD, NTFS, 4 GB of ram and sound on an HP laptop. I tried to restore windows, ran several antivirus scans and scans of mal-ware/spyware/ad-ware - all came up with nothing and all updates, still the problem persists.

  Have you updated your BIOS? This could be a long shot, but have you tried to run the tool it Fix ?