Drive hard test has failed Hard disk 1 (303) fast for my HP mini 110-3700ca PC.

Similar Questions

• "fast hard disk 1" (303)

  I reloaded windows 7 and the operating system tries to start, but just cycles of windows, try opening a brief screen small command line for restart, again and again. When I start the test I get the above message. It says memory ok. I tried recovery because it took forever to get online then ever to load a page. Thank you

  Hello

  If you get hard disk 1 303 quick then it is the hard drive. The hard drive has failed, and you need to replace the hard drive with a new...

  Screening of breakdowns material (Windows 7 and Windows Vista)

• The hardware diagnostic tool advises that the SMART short self-test has failed.

  The hardware diagnostic tool advises that the SMART short self-test has failed.

  Is this a problem? What can I do about it?

  Atelier42 wrote: the hardware diagnostic tool advises that SMART short self test failed.

  Is this a problem? What can I do about it?

  Hello Atelier42, this usually indicates that you have a hard disk failure.

  I would like to back up my data as soon as possible, just in case the hard drive breaks down actually.

  You must also make sure that you have the HP Recovery restore set for your system recovery disc in case you do not want to replace the hard drive.

  With this restore HP Recovery disk set, you could replace a defective hard drive and use this disk set to your HP system back as it was when shipped. Then, you could put your data saved on your system.

• Driver hard disk error

  Hello!

  It is not a hard drive error, that I don't know hard disk is in perfect condition according to CHKDSK.

  It is just a minor nuisance under the settings of PC peripheral hard drive WDC WD300HLFS is, show with a rather alarming message pilot error below. So I assumed that there is a problem with the installed driver. I went to the Device Manager and find the hard drive. Here, it is declared as this device does not work correctly.

  What could be the cause of the error of driver?

  Hello!

  It is not a hard drive error, that I don't know hard disk is in perfect condition according to CHKDSK.

  It is just a minor nuisance under the settings of PC peripheral hard drive WDC WD300HLFS is, show with a rather alarming message pilot error below. So I assumed that there is a problem with the installed driver. I went to the Device Manager and find the hard drive. Here, it is declared as this device does not work correctly.

  What could be the cause of the error of driver?

  laptop / pc comes sometimes with new hard drive controller drivers... go to the manufacturing site and check if the additional disk is available and if it is available, try to install that

• Images of a unique catalogue on two hard disks can be consolidated for a non-destructivly drive?

  My catalogue contains images of two different hard disks. One, my main drive and the other a small external. I want to draw all the files from the outside for the larger hard drive WITHOUT deleting them from the outside. I think that it's impossible to all the research I've done. I can easily move the files moving files in Lightroom, but this removes the files from the original disc. I can't import the files because they are already in the catalog. I can use Explorer to copy the files, but when I do this Lightroom ignoring double because he already knows about the image and where it was originally and still is. This is true even when the external is disconnected.

  One idea is to create a new catalog and import all of the photos in the new catalogue. If I do this will I lose any changes that I made in the original catalogue. And I can import the files from the primary drive without in fact to pass the actual raw data that is just say this new catalogue hey these pictures are already in this folder go to find them and then import the files from the outside, by physically copying in the dialog box import to lightroom from outside the main disk. This translates into a large photo file on the main drive with all the pictures imported and named the same way taken by date without destroying the files on the outside.

  Cleaning of the mistakes of the past is always much more complicated that take those time and not make them in the first place, but I have not lived my life that way. Thanks for any help.

  Best for the community,

  M

  I want to draw all the files from the outside for the larger hard drive WITHOUT deleting them from the outside. I think that it's impossible to all the research I've done.

  Not true, it is possible.

  In your operating system, you COPY the files (and not MOVE) bigger hard disk, then point Lightroom to the new location of the pictures on the larger hard drive using these instructions (scroll down to the section called "Update folder location")

• My drive hard netbook is too small for Windows Xp Pro

  I tried to load a new Windows Xp Pro on my Asus eee Pc 4 g with a hard disk of 4Gb SD. It was Linux I want. The microsoft site, I read stated that it would use 1.5 GB of space. I keep running out of space with all updates. I made a mistake by putting this new copy oem on the netbook. It was activated a month ago and I loaded it twice because it is so big. I compressed drive and reduced the system restore. I don't want to lose this copy and think I should be able to load it on a machine with a bigger drive. I can charge it with the same key or what I need to lose the software. I know it's my mistake, but I think I should be able to reload them on a machine with a bigger drive and save the cost of the software. Microsoft will allow me to move the software? Perhaps they will assign another key? Thank you

  I made a mistake by putting this new copy oem on the netbook.
  I should be able to load it on a machine with a bigger drive
  I can charge it with the same key or what I need to lose the software.

  Sorry, what OEM can't be moved to another computer.

  You can buy a hard drive more and put it in the netbook, and then install your OEM copy.

  You can move the windows on a new computer

  If it's a full license or upgrade retail - Yes. You can move it to another computer as long as it is installed on one computer at a time (and if it's a version upgrade the new Windows computer must have its own license of qualification). The previous Windows installation on your old computer must be formatted or deleted. You will have to perhaps call Microsoft and explain what happened to complete activation. Turning it on the second computer will automatically be in effect 'disable' the license for the first computer.

  If it's an OEM license - don't. OEM licenses, including Windows preinstalled on a computer before purchase and Windows purchased separately, are related to the first computer, they are installed on and cannot be transferred to another computer. To install Windows on another computer, you will need to buy another copy.

  Microsoft will allow me to move the software? Perhaps they will assign another key? Thank you

  You will need to buy another copy to install on another computer, if you can find a copy of XP.

  You can purchase Windows 7 here (or at a local store):
  http://www.microsoftstore.com/store/msstore/cat/CategoryID.44066700

• Driver for chipset Compaq mini 110 c - 1190sl

  Hi, I mean, where can I find the driver for the chipset of the Compaq mini 110 c - 1190sl intel atom n270.

  Can you help me?

  Thank you.

  Hello:

  You can download and install the Intel chipset driver:

  http://downloadcenter.intel.com/Detail_Desc.aspx?agr=Y&ProdId=2300&DwnldID=20019&ProductFamily=Chipsets&ProductLine=Laptop+Chipsets&ProductProduct=Mobile+Intel%c2%ae+945+Express+Chipset+Family&lang=eng

  Paul

• drive hard test shows 'hard disk 1 (303) quick"what do I do now?

  I have a HP pavilion DV6 notebook PC and I pressed f10 to run the hard drive and memory test. Test memory past but hard drives HDD 1 fast (303)? What should I do now?

  Hello

  303 error code is a disk failure short self-test and would indicate that hard is defective and must be replaced.

  If your laptop is still under warranty, contact HP and arrange for the disk replaced - you can check the status of your warranty here.

  If you live in the United States, contact HP here.

  If you are in another part of the world, begin here.

  If you are out of warranty and would like a guide to replacing the hard drive yourself, please let me know - include the full model number and your notebook dv6 series Nr - see here for an explanation.

  Kind regards

  DP - K

• Start Up Test failure, hard drive failure Test and fail to Test HP Pavilion dv4

  HP Pavilion dv4 daughter froze. I ran the hard drive running in and run tests. All failed with the following default ID:

  9LN3SC - 52L 650 - XD7U21 - 60CU03. What are my service options?

  There the Windows 7 operating system.

  You need to replace the hard drive and reinstall the operating system with the support of HP recovery.

  If you are under warranty, call HP and they will ship you parts.

  If you are out of warranty, then you will need to buy the hard drive and the recovery media kit.

  1-800-474-6836

  If you have any other questions, I would be happy to respond!

• Vista activated on the old hard drive hard disk failed to load to the new disk hard wont let me enable

  Vista activated on the old hard drive, failed loaded hard drive vista Ultimate edition on the new hard drive, but do not let me activate. This is a saved copy and use the product from the back of the disc that contains key

  Hi Tony,.

  I imagine the inconvenience that you have experienced, but don't worry, we are here to help solve the problem and guide you in the right direction.

  You can go through the steps in the link activate Windows Vista by phone activation.

  Hope this information is helpful and let us know if you need more assistance. We will be happy to help you.

• Unable to paste, cut or delete all data on an external drive (hard disk or USB key)

  Am only able to copy data from the external hard drive on my machine. A window named "Destination Folder Access Denied" appears saying "you have authorized to perform this action" with only 2 actions that can be performed: retry and cancel. I checked the status of my user account is administrator. Help, please! :(

  Hey... I put the hand on the problem... Quick Heal antivirus features a theft of data protection option that is enabled by default... I just disabled it and everything back to normal... :) has soon...!

• My drive hard disk external DRIVE does not work!

  I have a problem with an external hard drive mij on my pc, it's a px1267e - 1 g 32.

  I have bould last year and it worked well on my old pc with XP
  Now, I have a new computer with Vista on it and I want to connect to my external hard drive, but it gives no reaction on my pc.
  The password screen does not appear, I tried different think and Regen, I installed but I can't make it work

  Somebudy here have the same problem or know how I can do it I love it!

  Welcome them
  Jan

  PS. Sorry for my English

  Hello

  I have the same problem. But I've found a workaround.
  -Connect your HDD to PC VISTA
  -Select the CD drive with your browser (password)
  -Run ONSPCLCK.exe
  -Select 'Options '.
  -Select "Disable security password"
  -Enter your current password
  -Unplug the HARD drive
  -Connect the HARD drive

  now, it will work, but without any protection of password :(

  CU

  Post edited by: Master_of_Disaster

• starting test has fail?

  Windows me closed down to install updates. Now I have a start up test failed guest on my screen and I can't move forward. What can I do to fix the problem?

  Hello

  301 error code is a Smart failure and would indicate that hard is defective and must be replaced.

  If your laptop is still under warranty, contact HP and arrange for the disk replaced - you can check the status of your warranty here.

  If you live in the United States, contact HP here.

  If you are in another part of the world, begin here.

  If you are out of warranty and would like a guide to replacing the hard drive yourself, let me know.

  Kind regards

  DP - K

• Drive HARD recovery does not not for Satellite Pro L450D-12 x

  I have a laptop that I'm fixing for a friend.
  According to toshibas official specification it is than a HDD recovery partition which is hidden.

  For a reason unknown to me, now the 0 (zero) key does not work. F8 does not work either and the windows system restore does not seem to get me there either.

  Can someone please explain to me why this is happening?
  Nobody ever touched the hard drive on the alleged recovery hidden partition which is toshibas official specs 100%...

  Anyone share a few ideas with me here please

  Kind regards
  Andrew

  Hello

  The HARD drive recovery partition is not hidden
  In my case the image files when placed on the second partition in Toshiba HDD folder.

  However, the fact is that HARD drive recovery could be launched by pressing the F8 key, and then choose the option called repair my computer and in a new window the recovery HARD drive option should be chosen.
  If this is not possible, then you will need to retrieve the laptop using the recovery disk.

  I guess that this disk is not created in the past. Right? You can create the disc using the recovery disk creator which is preinstalled on all Toshiba laptops.

  If this is not possible, then you must order the CD here:
  http://backupmedia.Toshiba.EU/landing.aspx

• Exchange the HARD disk of 1 TB for one SSD 120 GB problem...

  Hello

  I just bought a HP pavilion special edition with audio of beets running windows 8.1.

  What I wanted was a windows 8.1 with touchscreen and SSD, but could not find a laptop with all these attributes at an affordable price so decided to buy this one and upgrade to an SSD HARD drive, 120 GB is more than enough storage for me so I bought a Kingston Hyper X 120 GB SSD I did a recovery USB media and installed the new drive, unfortunately, support for hp recovery would not format the SSD drive and then I accidentally formatted the USB and I am not able to make another.

  Any suggestions?

  You could re - install your 1 TB drive in your laptop and a Clone of your SSD drive. Then once the clone is complete simply swap the drives.

  Or you could buy a HP recovery support and recover from your newly installed SSD.