Drive hard treatment noise just continuously

Similar Questions

• Is it possible to fix my drive hard seagate, when it crashes?

  Well my drive hard seagate ST3500620AS just crashed and I need to know if there is anyway to fix it now that it does not work. If not I can just replace it and what I do on all my OS?

  Danick says:

  Well my drive hard seagate ST3500620AS just crashed and I need to know if there is anyway to fix it now that it does not work. If not I can just replace it and what I do on all my OS?

  N ° you can not fix it.

  A hard disk for the average person crash means that everything on the hard drive has disappeared forever. There is always some Seagatefor someone with vast resources.

  I hope that you have created a set of HP recovery disks. If you did, then buy a replacement hard drive (500 GB or more) and put it in your recovery disc in the DVD player. Go into the BIOS and set the DVD drive as the first on the start list. Once you have done this, you can start your PC and use the Recovery Manager on the set recovery disk to reinstall your operating system.  If you have not created a set of recovery discs you can always buy a set of HP at a reasonable cost.

  Best regards
  ERICO

• Equium - hard drive makes clicking noises

  Hello, can someone please help?

  I think my laptop is in trouble, the hard disk (or I think it's the hard drive) is do a lot of clicking noises and my battery life is running down when the adapter is connected. It seems that run down when the drive made those rattling. When the power mode is energy-saving sometimes stops clicking and the battery life fills up again, but recently its been doing even in power saving mode.

  I'm moving all my files on an external hard drive, even though I have a lot of stuff on my lap top. I can't afford a new laptop

  Can someone help me please?

  Thank you

  Hey Buddy,

  How to help you without knowing your model mobile exact?

  Generally if the HARD drive makes clicking noises it s time to replace. Backup to an external drive has been a very good idea.

  And how you can lose the life of the battery if the AC adapter is plugged? I put t understand it.

• I just ran the last update for my iPad and now it just continuously reboots to the black screen with the Apple Logo. Hard restarting does not help, neither do not connect the camera to MacBookPro. Any ideas?

  I just ran the last update for my iPad and now it just continuously reboots to the black screen with the Apple Logo. I left plugged in all night and still no change. Hard restarting does not help, neither do not connect the unit to aMacBookPro. When I do this, iTunes complains that it can not connect because the iPad 'expires '. Now it is disconnected, but I can't turn it off. Even close the lid will not extinguish it. Any ideas?

  Try the following. It seems yo may have to let the battery drain is completely:

  - iOS: do not respond or does not light

  -Also try DFU mode recovery mode post-test

  How to put iPod touch / iPhone in DFU "Karthik doodles."

  -If failed and that you cannot completely turn completely the iOS device, leave the battery to drain completely. After loading a hour repeat the foregoing.

  -Try a different cable

  -Try on another computer

  S ' there is still not successful that usually indicates a hardware problem and an appointment at an Apple store Genius Bar is in order.

  Shop Apple Store - Genius Bar

• is it possible to see EVERY folder and file that exists on the drive hard on one screen and in one place just as you could do in much older versions.

  OK... so I had an accident and there was good and bad news... the good news is that I was able to get it started and running "Save", but the bad news is that instead of giving a new image system clean (as I expected), I had a bunch of random pictures and other unimportant things and many important things seems lost but I think that its still all somewhere.

  now... to the front sometimes there was a windows program called "windows explorer" that would put all folders and all files that was on the hard drive on a single screen, and you can search through them.    When I shoot to the top of the Explorer windows on win 7, I get a page with a bunch of files minor that some things in them, but not what I see already...

  so... my question is simply "is it possible to see EACH file and a file that exists on the drive hard on one screen and in one place just as you do in earlier versions.    I did some research and went thru records that he will show me but I explicitly want is to see EACH file and folder that exists on one screen...

  is it possible in win 7?   and if so, how, please

  Steven

  Steve,

  Are you talking about the Windows Search function?

  In Windows Explorer, open the top-level folder that you want to watch in [C:\Users\yourusername\Documents or whatever it is you want] then look in the upper right area - there is a white box to the right of the address bar.  This is the search box.  Type * and then pause and it lists all the files in this top-level folder down through its subfolders.

  You can find more information about using Windows Search in

  A Guide to using Windows Search; Two Alternatives to Windows - Wiki

• Advice on which drive hard buy for Raid

  I'm going to buy http://www.newegg.com/Product/Product.aspx?Item=N82E16822136544 8 these hard drives, and I'll use a http://www.newegg.com/Product/Product.aspx?Item=N82E16816131004 raid controller to implement RAID 3. Western Digital know that these drives are not suitable for the raid, disk only I can find, is a http://www.newegg.com/Product/Product.aspx?Item=N82E16822136797. I was wondering if there is a difference actaul between these two that makes the difference. Also, I was wondering if anyone of you knows another hard drive that would be good for the raid which is less than $ 100.

  Your choice of reader and the controller look good for me.

  I have used a controller Areca with WD black for the past two years, and as long as you do not have a form any backup other than redundancy RAID 5 on your PC, you should be OK with the readers of 'consumer' (aka black WD, Hitachi sister, etc.) as opposed to "enterprise" drives for RAID (AKA WE RE3 RE4, Hitachi Ultrastar etc) systems.

  Records of the company are:

  -usually best parts - possibly some companies choose the best boards with defects less for their dearest readers

  -Sometimes a few features that help with vibrations caused by multiple drives in a PC working in tandem

  -almost always a feature that will keep the drive of the company to continue to try to correct any error while reading or writing beyond a certain number of seconds. WD calles this TLER (time limited error recovery);

  I've seen individuals suggesting that setting the spin-up time is increased from the default.7 seconds up to 1 second when you use consumer readers to help prevent consumer drives marked as bad. I did this and I have never had a car abandoned in two years.

  I have about 50% business (RE3 1 TB WD) and about 50% of consumer records (Black 1 TB 32 MB cache) that are very similar, with the exception of the firmware. In two years, I had a bad drive; No data has been lost, performance just the RAID and even that was pretty subtle. And by the way, it was one of the RE3 drives aren't infected, one of consumer readers! When I started with the WD drives, it was possible to download a software and to set the time on consumer drives TLER and gain many of the benefits models company without having to pay for more expensive readers. Then, a year ago WD changed their line WD Black to defeat this utility (it was a utility WD TLER!) to work with their readers of consumers; Yes, their were some upset users on this one!

  Jim

• Mystery needs Solution! Drive hard dv6258se

  Hello

  I recently got an error #1-07 on my test diagnostic message and decided to replace my hardrive.  I checked the specs for my box and ordered a SSD drive suitable to replace the original disc.  Or at least I thought it was the original drive.  The form of State that my box comes with a SATA I drive, but the bios and Device Manager claim that the drive is SCSI.  My box has been recalled twice to correct the defects/factory model, pourrait HP replaced the SATA drive with SCSI drive during this time?  I check the model number two disks to check what they are, but that did not really help since the original Toshiba MK1234GSX both the new 830 SSD from Samsung come in SATA and SCSI.  I checked the Samsung is SATA, but cannot confirm the Toshiba.

   

  I could format and restore the SSD from the restore disks, but restarting failed and the bios did not find the hard drive.  Subsequent attempts to restart grew up a NVIDIA, read error.  When I put the disc Toshiba back in it starts but is still VERY slow.  Click, wait 10 minutes, click, wait...

   

  Everything I read on the State of the boards that the default value of the bios is SATA, but retoring bios factory settings has not solved the problem.

   

  What is going on?  Please help and advise.

   

  Thank you.

   

  PS being new I accidentlally posted in the wrong place: you will find a more detailed description in the Desktop section, where I posted recently submitted: hp dv6258se drive hard toshiba appearing as SCSI but spec says SATA

   

  Yes, him talking about HP guy to me and I even found many other complaints about the disks SATA is read as a SCSI, it was a common occurrence from 06-08 and then had no performance impact that is a possible reason why the SSD is not compatible in theory it should be.

  .. .He explained that because player plugs directly into the motherboard and the chipset software is only formatted to read things a specific way that it will NEVER be read a SATA as a SATA, which might be why the dv6000 are not able to recognize any SSD.  I.E. HP dv6000 is capricious and has a few quirks, if SSD does not occur.

  So I'm going to buy a traditional HD, a cert HP technician think I should be able to go as high as a 500 GB HD, but I really just to get my box of operation, so I agree with a 120 GB.

  Thanks for your help solved mystery.

• cq5222uk vn452aa #abu windows 7(64bit) 3 TB drive hard seagate showed that GB 746

  cq5222uk vn452aa #abu windows 7(64bit) 3 TB drive hard seagate showed that GB 746

  Watch 746,39 instead of 3000 GB GB SATA drive, I used Assistant seagate drive but you get an error when you try to use the 'extended capacity manager' - version not supported for nVidia disk controller driver

  where can I get a supported nVidia disk controller driver version if they are available for my system, or windows 7 home 64 bit should recognize the drive anyway?

  thanx

  I just installed a pcie sata II raid startech.com controller, after a slight problem installing the driver, on the third attempt, windows saw the full disk disk management

• New drive HARD & OS errors-> HP 8000 Elite Small Form Factor PC

  New drive HARD & OS errors---> HP 8000 Elite Small Form Factor PC
  
  Can not install Win XP on another hard drive
  
  I work with a...
  HP Compaq 8000 Elite Small Form Factor PC
  
  Original SATA HDD is loaded with Windows 7 Pro.
  
  In order to install a program using this PC as a digital video recorder
  I installed the video capture PCI card and related software. I had problems
  associated with software and Windows 7.
  
  I know that the software works with Windows XP.
  Do not want to remove the original HDD, I tried my win7
  to replace the HARD drive and do a clean install of XP.
  
  I get the same error during the installation of the OS.  I tried different
  SATA and different XP install disks.
  
  The error I get is shown in this photo.

  

  Original HP HARD drive is a Hitachi 160 GB
  
  I tried 2 known to be good SATA drives.
  Seagate 500GB
  WD 80 GB
  
  I checked the bios settings and even revenue tio rear BIOS
  default settings.

  I get this error even with everything I tried to do.

  This happens during the OS install just after or during the process of the installation of temporary files are current

  written to the HD.
  
  When I re - install the original HD loaded with Win7, everything works as it
  expected.
  
  Any ideas on what] s going on here?

  Hello:

  The problem is that you must incorporate the necessary sata ahci drivers for windows XP to see the hard drive.

  Has Windows 7 and XP is too old an operating system to make them.

  Read the info at the link below, section of Intel and then read the downloadable PDF document for instructions on how to integrate all the drivers.

  http://h30434.www3.HP.com/T5/notebook-operating-systems-and-software/SATA-drivers-for-XP-solution-on-0x0000007B-BSOD/m-p/114120#M17758

  The only other way to install XP on this model is to go into the bios, the storage section and change the setting of sata ahci to ide emulation, save the setting here and once again, when you go out.

  The problem is that if you do this, you cannot change the setting for the preferred setting of DCIS, unless you know how to install the correct ahci sata driver after installing XP from the controller.  If you try to just change the setting back on ahci without having to install the controller driver, the PC does not start upward.

  Try "slipstreaming" the drivers first and if you can't swing, install XP in IDE mode and I'll help you get the drivers installed, so you can change the BIOS to ahci setting.

• Delete/reformat the drive hard partition (s) to activate the operating system reinstall

  I have a HP 2000 2b09wm. He just broke, gives me the error message saying in that I needed a new hard drive. Suppose the old went kaput (even though I bought this pc on eBay not a month or two before). I have a new HD and a Windows 8 reinstall the software from a dealer on eBay. I tried several routes to try to reinstall the OS, resulting in many dead ends *. I asked the dealer to help, but did not get much. The last thing he offered was to remove the partitions in the new HD. I looked at a page eHow, how to remove Partitions on a hard drive. It is said to get a CD which includes fdisk.com. I burned super fdisk (2 MB) of SFbootablecd.iso and fdisk (40 MB) of fd11src.iso. I went into the BIOS to set the boot order. I put the saved first, CD/DVD-ROM internal drive and tried the two CDs. It always starts with just a screen with this:

  Not found boot device
  Please install an operating system on your hard drive
  Hard drive (3F0)
  F2 System Diagnostics
  For more information, please visit: www.hp.com/go/techcenter/startup

  I even tried to put the CD/DVD ROM USB drive first... same results.

  So my questions to you, I guess, is first of all, why the CDs fdisk is not start? I burn the evil fdisk? Second, do you know why my OS couldn't be installed using the software to reinstall? The guy I got it (http://www.ebay.com/itm/181524428825?_trksid=p2060778.m2749.l2649&ssPageName=STRK%3AMEBIDX%3AIT) , verified_computer_specialists, has excellent comments, so I guess that the software is legitimate and the computer is actually original with Windows 8.

  Thank you.

  * A couple of the streets:

  Compatibility report - the computer has started using the Windows installation media. Remove the installation media, and then restart your computer so that Windows starts normally. Then, insert the installation media and restart the upgrade. Do not select [Advanced ICustom] I do a upgrade. [Advanced ICustom] I install a new copy of Windows and deletes your programs and settings.

  Another path to the Windows installation, I get this: select the driver to install: browse folder - access the driver and then click OK.
  It gives you the list under 'Computer' which includes "CD drive (E HRM_CCSA_X64FRE_EN-US_DV5)" (resettlement software) and below, support records - sources of boot - efi --.
  Simply choose drive E itself, the message appears: load a driver: no signed device not found driver. Make sure that the installation media contains the correct drivers, and then click OK.

  Enter the BIOS and disable Secure Boot-enable Legacy boot, save & exit. Try to boot again from the disk Win 8.

• How to convert a drive hard hp to work in a sony vio

  I took the hard drive of my computer hp laptop which is good and work and put it in my vaio from sony who needed a hard drive, but drive hard said always its a hp how do we change all the drivers of hp for the drvers from sony for the material in my sony is a western digital hard drive? a lot of things will not work because the screen on the sony is bigger the mouse doesn't just please help me solve this problem or at least guide me in the direction of someone who can

  Thank you
  Megan

  Hello

  You do not convert it.

  When you install a hard drive with an operating system already installed from another machine (HP) in to another machine (Sony), you must reinstall the operating system, using the correct disc for this Sony computer.

  Contact Sony and ask them to send you a recovery disc for this model.

  Normally, they do this for a small fee.

  Then reinstall the operating system using the correct disks.

  Another issue to consider:

  It is not legal to install / transfer the license of operating system OEM HP for a Sony.

  This license is linked to the HP machine.

  See you soon.

• I will not let me connect to my main, connect you to where I put my password in and then logs on just continuous vista startup repair in time ever I start my computer

  I will not let me connect to my main, connect you to where I put my password in and then logs on just continuous vista startup repair in time ever I start my computer

  Follow these steps to try to solve your problems of boot.

   

  Restore point:

  http://www.howtogeek.com/HOWTO/Windows-Vista/using-Windows-Vista-system-restore/

  Do Safe Mode system restore, if it is impossible to do in Normal Mode.

  Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.

  Try a restore of the system once, to choose a Restore Point prior to your problem...

  Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.

  http://www.windowsvistauserguide.com/system_restore.htm

  Read the above for a very good graph shows how backward more than 5 days in the System Restore Points by checking the correct box.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

   

  If the system or Mode restore safe work not and you do not have a Microsoft Vista DVD, make a repair disc to do a Startup Repair:

  Download the ISO on the link provided and make a record of repair time it starts.

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu.

  When you have changed that, insert the Bootable disk you did in the drive and reboot.

  http://www.bleepingcomputer.com/tutorials/tutorial148.html

  Link above shows what the process looks like and a manual, it load the repair options.

  NeoSmart containing the content of the Windows Vista DVD 'Recovery Centre', as we refer to him. It cannot be used to install or reinstall Windows Vista, and is just a Windows PE interface to recovering your PC. Technically, we could re-create this installation with downloadable media media freely from Microsoft (namely the Microsoft WAIK, several gigabyte download); but it is pretty darn decent of Microsoft to present Windows users who might not be able to create such a thing on their own.

  Read all the info on the website on how to create and use:

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  ISO Burner:http://www.snapfiles.com/get/active-isoburner.html

  It's a very good Vista startup repair disk.

  You can do a system restart tool, system, etc it restore.

  It is NOT a disc of resettlement.

  And the 32-bit is what normally comes on a computer, unless 64-bit.

  See you soon.

  Mick Murphy - Microsoft partner

• Why can't replace my drive hard hp compaq 6200SFF 250gig with the largest disk

  I think I posted this in the wrong section earlier.   I want to replace my drive hard HP Compaq 6200SFF with a larger 250gig. I've done it before with other computers with no problems. I bought a 500gig drive at a local store and makes a picture of Symantec Ghost (option was image-boot) to my 250gig drive.    Then I installed the drive and started again with my ghost drive.  Normally I just launch the function of disk image restore to restore the image of the old drive to the new drive.  When I tried to do with the 6200, very well restored ghost image but as soon as I start on the new drive, I get an error message saying that "windows does not stop normally.   I never get to see the Windows Startup logo and welcome screen or something else than this black screen with white letters.  Windows did end normally when I was last using the 250 GB drive and it will power off.  I can't get the restart to go further - I just get the same error screen - there is no options or choice - all said the message is to call your service representative.  Is there something special about 6200 readers?  Do you need to do something instead of or in addition to making a ghost image?  Is it something in the bios that should reset itself?

  Thank you, Hanspuppa.  I think you have a more recent version of Acronis, I ghost.  However, I was able to solve my problem using the Windows repair disk.  I ghost a disk image (ghost - ib) of my drive hard old man and then did a ' local disk image - of ' put the image on my new drive.  I received the repetitive message "Windows 7 does not normally" but then inserted the windows repair disk and booted from it.  He finds that the boot image on the new drive was bad and repaired.  He did not cela easily - reboot/turn off many times before the finished repair disk, I had and the pc booted from the new hard drive properly.  Now, I can do this with windows 7 and the emulation of hard drive has been to AHCI.  Knit a friend and I tried to do this on an another HP6200 with an image of Windows XP. We did not have a handy XP repair disk, but we went in the settings of the bios under storage on disk and passed the SATA AHCI to IDE emulation.  When we restarted Windows message here once, we supported on enter and him went pc to boot normally.  So the problem revolved around the difference in the AHCI IDE and the boot image created by Ghost.

• I want to reinstall Windows 7 Home Premium so that I can format my drive hard as free space automatically reduced.

  I want to format my drive hard as free space automatically reduced. I have windows 7 Home premium authentic (built with my acer aspire 5742)

  Original title: relocation

  The recovery 'hidden' Acer Partition should be left intact.

  But you do not what you should have done when you bought your Acer machine; know-how in case of hard drive failure recovery disks.

  Here is how to do this with an Acer:

  "How can I create a set of the backup recovery disks?

  http://Acer.custhelp.com/app/answers/detail/A_ID/12866/kW/recovery%20disk

  Your Acer computer includes Acer eRecovery Management software that allows you to perform operations of restore directly from your drive hard disc , which allows a faster recovery process and no need for discs. Acer eRecovery Management does, however, allow you to create recovery discs. The recovery disks will allow you to restore your computer something happened to your hard hard disk .

  Note: According to Acer computer you have your Acer eRecovery Management version may be slightly different, but the ability to create your discs will be available.

  To create your recovery discs backup follow these steps:

  1. Click on the Start menu, and then click all programs.
  2. In the list of programs, click the Acer file, and then click the Acer eRecovery Management .
  3. User account control Windows may request your permission to run this program, click Yes.
  4. In the Acer eRecovery Management window left click backup, and then click create a default disk factory.

     Note: If you use a laptop or netbook, you will be asked to connect your power adapter, make sure that the power adapter is plugged in before continuing, and then click OK.

  5. In the page to create a default disc factory select the drive you want to use for burning the recovery media, and then click Start.
  6. The disc is ejected whenever he has completed burning, if several drives are required insert a new disc when you are prompted, and then click OK.

  The other option available is to create drivers and Applications Disc. You can use this to create a backup disk to install specific drivers without destroying the entire operating system and applications.

  To create a drivers and Applications disc, follow the steps below:

  1. Click create disk drivers and Applications.
  2. On the page create drivers and Applications disc select the drive you want to use for burning the recovery media, and then click Start.
  3. Whenever it has finished burning, the disc is ejected.

  Note: If the computer does not have an internal optical drive, an external optical drive will create a set of Acer Recovery media.

  See you soon.

• access denied drive hard sony vaio VGN-N250E

  access denied drive hard sony vaio System model: VGN-250E
  System type: X 86-based PC
  I all ready try properties and everything just gave me a message access denied also in single window it shows my name but I cannot enter or change the privileges... What can I do with this results! How can I enter my hard disk? user worldwide has been

  Thank you for your post and welcome to the forum.

  You can discover the "Access denied" error on your computer for various reasons - please see the article below for assistance Microsoft Knowledge base:

  http://Windows.Microsoft.com/en-us/wind... or-files