CD/DVD in the DVD RW drive not recognized

Similar Questions

• Compaq Presario DVD/CD drive not recognized after upgrade to 8.1 Windows

  Hello, I recently updated my SR5601UK to Windows 8.1, and he ceased to recognize the CD-ROM drive in Windows.

  The last disc it read was the 8.1 upgrade disk.

  I checked the power and data cables and the two are connected, Bios, recognizes that I checked for upper and lower buffers in the registry and there is nothing to remove.

  No CD/DVD drive is listed in the section 'Devices & readers' on 'This PC' or in 'Device Manager '.

  The powers of disc when a disc is inserted, but nothing appears on the screen.

  I can only find drivers/firmware on the site HP for XP, Vista and 7, but nothing for 8, so cannot say if it is a firmware/driver problem.

  HP Web site says spec of the car but not the manufacturer, so I had trouble finding the update.

  Hello:

  See if the resolution steps 2, 3, 4 or 5 solves the problem.

  One usually does.

  http://support.Microsoft.com/kb/314060/en-us

• External CD/DVD RW drive not recognized by Windows XP

  Original title: Professional. Have an advantage humbucker 16 X 8 DVD/CD RW & ATi Radeon 9550 AGP 250 M for video and VGA that is not recognized

  Have a double microphone 16 X 8 DVD/CD RW advantage which is not recognized by XP Professional.  Also have a CD unit and when windows installs the drivers - it gives them both the same driver.  DVD RW is only recognized as a CD! Have used Microsoft fixit and he says everything is fine. -It uses the same driver for CD and DVD RW units.

  Have also an ATi Radeon 9550 AGP 250 M for the video and VGA and Windows XP does not - have question marks for them in Device Manager.  Microsoft fixit - did fix this problem.

  Have deleted the drivers and tried to control the computer for downloads by Microsoft and it can't find them - if I do a check for hardware changes, he finds only those who do not work properly and that don't work at all, as indicated above.

  Also went on the Microsoft Web site and cannot find a solution it - clicked on links with any help that I could see.

  Sorry for the problem - just fusterated

  LF

  Hello

  To work around this problem in Microsoft Windows XP, follow these steps:

  Note: Serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click the following article http://support.microsoft.com/kb/322756

  Step 1: Remove the registry entries modified. To do this, follow these steps:

  a. Click Start, click Run, type regedit and then click OK.

  (b) in the navigation pane, search for, and then click the following registry subkey:

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  (c) in the right pane, click UpperFilters.

  d. in the Edit menu, click on delete.

  e. When you are prompted to confirm the deletion, click Yes.

  f. in the right pane, click LowerFilters.

  g. in the Edit menu, click on delete.

  h. When you are prompted to confirm the deletion, click Yes.

  i. exit the registry editor.

  j. restart the computer.

  Note: If you notice a loss of functionality in a particular program as in the CD recording software after you remove registry UpperFilters and LowerFilters values, reinstall this software. If this problem continues, contact the supplier of software to help.

  Step 2: Remove the existing drivers. To do this, follow these steps:

  a. Click Start and then click Control Panel.

  b. If the control panel is in category view, click performance and Maintenance and then click System.

  c. If the control panel is in Classic view, double-click System.

  d. click the Hardware tab, and then click Device Manager.

  e. expand CD-ROM/DVD-ROM drives, right click on the device CD and DVD and then click on uninstall.

  f. When you are prompted to confirm that you want to remove the device, click OK.

  g. restart the computer.

  Note: after you restart your computer. the drivers will be automatically installed.

  See: http://support.microsoft.com/kb/982116/en-us

• Satellite M100 - DVD-Multi drive not recognized as an engraver of CD/DVD (!)

  Hello

  After the installation of Win XP SP3 in the last update of windows, Toshiba tools, but also other CD/DVD burning software don't recognize this title, the drive from DVD - ram only as a CD-rom drive.
  Thus, software such as recordIt does not work.

  I have already deleted the drive in the list of material and have reinstalled.
  The driver being used is 'Mat * a DVD - RAM UJ - 841S'
  That's right, so far. But it's not burn CD/DVDs.

  A have you noticed this problem as well?

  Thank you.
  Bjoern

  Hello

  I think that it s a lower upper filter question and I think that you could solve this sequel to this instruction step by step.

  First remove the player of ODD (CD/DVD) from the list in Device Manager.
  Then access the registry and delete the Upperfilters and Lowerfilters completely from the following registry key values:

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Contro l\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  Finally, you must restart the device.

  Once again, windows will recognize the STRANGE

• Connected to the Portege 3500 USB DVD burner is not recognized correctly

  I am trying to connect a burner DVD HP DVDv 940th my 3500.When Portege I plug in the device, it is not recognized and the Device Manager list as a storage of unknown mass without a driver. Where can I get this driver?

  Hello

  Try to check the assumption of the manufacturer or the download page. Manufacturers of portable gift use support external devices t produced by other companies.

• I have a cd and dvd ROM on my computer but it will not read the discs and is not recognized on my computer

  Original title: no dvd

  I have a cd and dvd ROM on my computer but it will not read the discs and is not recognized on my computer

  Hi Lesliestones,

  ·         Did you do any change on the computer before the show?

  Follow the suggestions below for a possible solution:

  Method 1: I suggest refer you to the article in the Microsoft Knowledge Base and check if it helps.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs

  http://support.Microsoft.com/kb/982116

  Method 2: You can run the fixit and check if it works.

  Your CD or DVD drive cannot read or write media

  http://support.Microsoft.com/mats/cd_dvd_drive_problems/en-us

  I hope this helps.

• DVD/CD drive not reading CD or DVD inserted, clues?

  Hello. I hope someone can help as this was produced during the week.

  The DVD/CD drive not working properly. Whenever I insert a DVD or a CD of my laptop starts apparently read (humming noise), but my laptop does not detect the disc, or open my computer shows the disc. I tried to update the driver, while watching helps out that the window has provided and that you have installed all the updates for my laptop without success.

  Does anyone have advice I can try that can solve this problem, because it becomes an impediment, thanks in advance for any help, you can be able to give.

  Yuuki-chan

  When you open 'Computer', you can at least the CD\DVD himself player? Have you tried another disc?
  Also, go to start Manager select menu\ click device right computer\ properties\ in the upper left part of the window
  In Device Manager, look at your DVD Rom drive, open it and double click on the driver. It doesn't seem to work correctly? Thank you, Jeremy M - Support Engineer

• CD/dvd drive not recognized

  CD / DVD ROM IS NOT RECOGNIZED I SEE NO DRIVE E IN MY COMPUTER

  PLEASE IF SOMEONE NOT HOW TOTROUBLL PULL ON THIS PROBLEM IN HP PAVALIIAN NOTBOOK

  Thank you

  Hello

  Please do not type in capital letters because it's difficult to read and considered to be shouting.

  --------------------------------------------------------------------------------------------------------

  Step 1: Please do all the same underneath if you did some before as is often total
  a process that solves the problem.

  Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
  Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
  RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
  below.
  
  Then, work your way through these - don't forget the drive might be bad, could be a coward
  cable or slight corrosion on the contacts (usually for a laptop) and other issues.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  Try this fix manually if the Fixit 314060 does not work
  http://www.pchell.com/hardware/cd_drive_error_code_39.shtml

  Your CD or DVD drive is missing or is not recognized by Windows or other programs-
  a Mr Fixit
  http://support.Microsoft.com/kb/982116

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
  for Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error in Windows
  Vista installation after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
  ends. Remove and replace, do not just tight. For laptops, you can often clean power and
  contacts data with a pencil eraser.

  Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
  manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

  ===============================

  Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD
  Burn and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
  do it right.

  Did you follow the Troubleshooting Guide for the reader who still does not work? There are
  the entries in registry that the troubleshooter does not solve and those who "might" be the cause.

  Check with your Maker system and a device for the two possible firmware updates and
  the correct registry entries for your car.

  Here are the keys that I of course are those in question - for the subkeys of the CD/DVD drive
  as there will be other subkeys in these keys. Do not forget to ask specific keys involved as well as
  the parameters.

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  -----------------------------------------------------------------------

  You can probably find more info here and maybe even the exact registry for your CD/DVD settings
  drive from someone with the same model.

  Forums - a lot of expert real help
  http://Club.myce.com/

  CD/DVD units
  http://www.myce.com/storage/

  Use DevManView to locate the CD/DVD in the registry (be careful and do a prior Restore Point)
  nothing change) - find the DevManView device and then make a right click on it free in RegEdit.

  DevManView - free - an alternative to the standard Windows Device Manager, which displays all the
  devices and their properties in flat table, instead of the tree viewer
  http://www.NirSoft.NET/utils/device_manager_view.html

  I hope this helps.

• Tecra M5 - DVD - Ram is not recognized

  Hello

  This is my 1st post, so this is.
  I have a Toshiba Tecra M5 my old drive has just started to slow down, I bought a new drive Tsstcorp SN-S082H/baby.

  When I slot the drive in the Bay is not recognized by the system immediately unless I'm going to add harware and ASNA for new hardware, and then he picks it up,.
  When stop & restart lappy dvd - ram is not recognized by the system, or BIOS, the light on the flange of the discs is on but when I press the button open nothing happens. I installed the latest firmware, I also don't you any driver of indevice error messages sound as if the reader is not installed, but the light on the drive is turned on but does not open.

  Some1 can help me please?

  Model name: SN-S082H/baby
  Code OEM: TS
  F/W ver. SB01

  Follow the instructions posted by Akuma. Maybe this can solve the problem.

  Also, I checked the Tecra M5 user manual. There is a list with compatible DVD players, and your new drive is not listed. Not every drive is compatible with any laptop.
  If it doesn t work get the reader to the merchant computer buy a compatible player that is listed in the user manual:

  TEAC CD-224EN
  TEAC DV-28EN
  CCP UJDA770
  TSST TS-L462C
  Pioneer DVR - K16
  CCP UJ-841

• DVD player is not recognized correctly - Equium L100

  Can help any 1 Please my DVD - RW is not recognized in my system. Sometimes I boot and it is there, but other times I start up and it is not shown in my computer or Device Manager
  
  Seriously frustrated.

  Hello

  Please try this http://support.microsoft.com/kb/314060/en-us

  Is the DVD drive in the device with the yellow exclamation point Manager?

• DVD rw is not recognized as writable.

  DVD rw is not recognized as writable. Difficulty of MS used. Did not work. installed a new drive. still not recognized. any other ideas?

  Hi jp1681,

  ·         This fixit did you use?

  ·         The drive to read but not write disks?

  Method 1: We will uninstall the DVD drive in Device Manager and reinstall.

  a. click the Start button and then right click on my computer. Click on properties.

  b. click on the Hardware tab, and then click Device Manager.

  c. now, expand the CD-ROM/DVD-ROM drives, click with the right button on the CD-ROM/DVD-ROM drive and click on uninstall.

  d. restart the computer.

  Method 2: Log on to the manufacturer of the DVD drive and install the latest updates from driver\firmware.

  Method 3: If you are not able to read any DVD, check if you have followed the article mentioned below.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs

• I want to download apps on the other disk drive not c.

  I want to download apps on the other disk drive not c.

  Are you referring to Creative Cloud products

  If so, follow the procedure below

  Open creative cloud

  Right click the gear on the top icon and open the preference

  Click the Apps tab under preferences.

  You will get the option

• The mistake that the USB device is not recognized... Help, please...

  I am trying to connect to Simple external storage drive and once I followed all the steps (only 2) Windows XP gave me a message that the USB device is not recognized or it malfunctioned. I disconnected everything and tried again in another USB port and still had the same error. I know that is not the usb port of my computer because I have it plugged into a port that just worked. I have Windowx XP SP2. Any help on this would be appreciated.

  XP forums:

  http://social.answers.Microsoft.com/forums/en-us/category/WindowsXP

  Link above is for XP Forums.

  There is a list of the different Forums XP to the link above to help you.

  You get the help you need there.

  Here is the Vista Forums.

  See you soon

  Mick Murphy - Microsoft partner

• IDE hard drive not recognized in bios Vostro 200

  My friend gave me his Vostro 200 when she bought a new computer. I took the 130 GB drive HARD from my old computer and installed with a mini vertical bridge Sabrent SBT-SCIDE and a Molex to SATA power adapter. When I booted the computer and check the Bios, it does not appear. I checked the connections, and they agree, then I hung up in the old computer to ensure that it still worked. No problems in the old computer and no errors when I ran the disk check. Re-installed in the Vostro, but still not recognized.

  Did I miss something as controllers or orders at the entrance?

  For any help or suggestion would be greatly appreciated... ed

  Most of the time these IDE SATA bridges do not work - you may need to try several of them until you find one that does - assuming one will indeed work.  The only reliable method to fix an old IDE drive to a new SATA system is to mount the drive in an external USB box.

• When I type in a url, the Enter key is not recognized, so the site does not load

  When I type a url or paste in one and press ENTER, the Enter key is not recognized and nothing happens. It does not load. If I use a bookmark and click on a saved url that will load automatically.
  Have uninstalled and reinstalled firefox and it has not solved the problem.

  The problem may be caused by the Ask.com toolbar (Tools > Modules > Extensions)

  The details of your system display this toolbar to the user as AskTbARS/3.11.3.15590 agent

  • https://support.Mozilla.com/kb/troubleshooting+extensions+and+themes

  Start Firefox in Firefox to solve the issues in Safe Mode to check if one of the extensions or if hardware acceleration is the cause of the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > appearance/themes).

  • Makes no changes on the start safe mode window.
  • https://support.Mozilla.com/kb/safe+mode