Driver required message

Similar Questions

• Cannot print on the HP LaserJet 4050 printer - "the printer driver is not installed. Can't find a Package of basic driver required by the printer driver Package.

  Running Win7 32 bit.  Have had the printer HP LaserJet 4050tn installed for 2 years.  It is on the network and is always accessible from other computers on the network successfully.  I was printing to it in a billing program web-based when my PC froze.   Rebooted and was no longer able to print to it.  Tried to delete the printer, the spooler of compensation / Max ', and re-installing the printer with drivers downloaded from HP (tried the standard and universal drivers).

  When I try to install the printer I get a message "Player of the printer was not installed.  Can't find a Package of basic driver required by the printer driver package"

  I have a Brother MFP 2820 it is USB and it works very well.

  Any help would be greatly appreciated

  Try HP Print and Scan Doctor
  http://h10025.www1.HP.com/ewfrf/wc/document?cc=us&LC=en&DLC=en&docName=c03286146

• Satellite Pro A40 guard stop with the ATI driver error message

  My girls having some problems with her laptop and get back to Uni at the end of week for me to have a look on.

  Basically, he keeps closing sometimes with an ATI graphics driver error message. I had updated the memory last Christmas and resinstalled from scratch.

  My first impressions are it is overheating and I probably need to clean the fan, was wondering if anyone had any ideas?

  Thank you very much
  Keith (South end)

  Satellite Pro A40 is about 3 years old and it is possible that the unit needs to be cleaned. If the appliance is used intensively, I assume that there is more dust inside. By overheating of the appliance stops suddenly without any warning.

  As a first step the device. I don't know if it's the right idea to do it alone, but if you are familiar with laptops, you can give a try. After having done that, your daughter should carefully watch what happens the next few days.

• Driver HARD drive required for installing XP on my Equium M50-216

  Where can I find this driver? Ive looked in the wire section but theres no clearly marked driver for it. Installation of XP is stalled at "Setup is starting Windows XP", Ive updated to update the BIOS, so that's all I can think about

  Could you please put first what model/series laptop do you have?

  Published in you the driver second messages has been designed to use the RAID functionality.
  You have RAID?

• Now on windows 7, the games running slow - update video card driver error message and/or turn on hardware accelerator. Sony supporting not - how make to identift video card in my laptop?

  Now on windows 7, the games running slow - update video card driver error message and/or turn on hardware accelerator.  Sony supporting not - how make to identift video card in my laptop?

  Press the Windows key, type in "Device Manager" without the quotes and the Device Manager select from the list that appears, or press ENTER.

  In the window that appears, find graphics card and press the sign more or arrow to the left of it. It should fall down the name of the video card you have.

• To install the device driver required to access your hard drive, insert the installation media containing the driver files, then click OK."

  I'm trying to move from xp to windows 7. I spent all the requirement but she says to install the device driver required to access your hard drive, insert the installation media containing the driver files and then click OK. "what should I do? Where can I find the driver?

  Guess he would seek software/drivers for the chipset MB

  & sata/IDE controller software. Get the MB hardware specifications, go to the mfg

  Web site & download the software and drivers. If intel, download the chipset installation

  utility & install it 1. The other would be the SATA or / and drivers for the MB IDE

  controllers, 'Matrix Storage console' would be the one, also chk for desktop

  Internet downloads, amd, and other brand materials would be substantially the same.

• the virtual machine monitor driver required by the virtual machine is missing

  Hello
  After you install virtual pc xp2 and when I run this program I got this messege (the virtual machine monitor driver required by the virtual machine is missing)
  What is the answer

  Hi jameelaswad,

  The question you have posted is better suited in the forums of Virtual PC. Please see the following link for more information.

  Windows Virtual PC / Windows XP Mode Forum

• Complete hard drive well messages have a lot of space.

  Hello world

  IM using a MacMini 2012 with 16 GB of RAM and a 500GB HDD stock.

  I don't know what to do. My MacMini gives me error messages all the time say that my HARD disk memory is full - but it isn't.

  I already emptied the trash. I was transferred to GB´s videos on an external HARD drive. Sometimes, the memory is more and what is reduced without having done anything.

  Today I had 1, 76 GB of free memory and wile watching a video the same 'lack of HARD disk space"message.

  The amounts also vary a lot. Yesterday he showed me 210 GB of videos (green) - today after the transfer not 10 GB of videos, it says now that I just left 12 GB and the difference is now on color (yellow) data.

  Can someone help me please...

  Hope I explained myself good enough.

  Thx a lot in advance!

  Try re-indexing of Spotlight.

  Spotlight - re - index

  -Minimum space required free disk

• HP Pavilion Notebook 15-p050ca: graphics driver error message started after the upgrade of Windows 10 model installed on #: G6U13UA #ABL

  I have recently upgraded to Windows 10 and since then, I received the following message through a game: "display Intel HD Graphics driver Driver for Windows 8 (R) stopped responding and has successfully recovered."

  I checked my graphics driver and it says that it is up-to-date.  I tried installing the latest drivers for my laptop model (according to the HP drivers page), December 15, 2015, installed without a problem, but no version has not fixed the problem.  An error message appears when I try to install the March and April, 2016 versions of graphics drivers, claiming that they are not compatible with my computer.

  I also tried the Intel and HP driver update utility and told me that my drivers are up to date.  However, when I look at the properties of my Intel(r) HD Graphics Family in Device Manager, I noticed that information on the events tab says: "peripheral PCI VEN_8086 & DEV_0A16 & SUBSYS_227E103C & REV_0B\3 & 11583659 & 1 & 10 still requires the installation."

  I don't know what needs update on my computer or if this driver is incompatible with Windows 10 and there is not yet an upgrade?  Advice or opinions would be appreciated!

  My computer model is the 15-p050ca HP Pavilion Notebook PC (ENERGY STAR) model #: G6U13UA #ABL and the graphics driver is version #: 10.18.15.4279

  I went back to 8.1 for Windows and ran the store several times and then reinstalled Windows 10.

  I watched the graphic version installed and version 20.19.15.4331 dated dated 18 November 2015, but he still claimed there was an update of the graphics driver.  I tried the update and it was version 10.18.15.4279 dated August 2015, which was the same version that was installed when I had problems (and the same version on the HP website), then I went back to the 20.19.15.4331 version.

  I tried all the graphics drivers listed for my computer on the HP support page and again, I had the same problems with them as I had before (either claim that my computer has no minimum requirements or my graphics driver crashing).

  With the current version (20.19.15.4331), my graphics driver has stopped at least for now crashing, but I assume that this is not a specific driver HP and is only based Intel?  If so, I recommend HP glance on the issue, I've had if they claim that these drivers are supposed to work for my computer when my computer is, in fact, not accept them.

• Broadcom Netlink NIC driver required

  Hello

  I installed Windows 8 Pro (clean installation) on my HP DX7400. It is now double boots Win8 or Win7.

  Win7 works as before, but does not connect Win8. It turns out that no driver installed for the card Broadcom Netlink Gigabit Ethernet. Asked to Broadcom and they say the adapter is EOLed, not supported under Win8.

  PC connected with 3 g Galaxy Tab attached and fine all connected.  Driver update search and seems to find a driver but it fails with a message about a mistake in the INF file.  Suspect it's a Win7 driver.

  Anyone know of a driver that will work with this PC and NIC?

  Thank you

  Hi Paul

  I'm also surprised that Broadcom did not work

  However

  I had a sniff around the mancave and found a very old Realtek RTL8139/810 x NIC (PCI).  Its recognized by win7 times and 8.

  WIN8 is now character very well... all I have to do is figure out if its worth all the trouble.

  The PC gets all upset if I copy stuff from one system to the other (both on the same disk) and may require chkdsk, I have through the other hard drive to keep happy file systems.

  See you soon

  Ian

• Additional plugins required message, but not plugins available.

  "Additional plugins are required to display all the media on this page" message on every page of each web site.
  Click on install and I get message "no appropriate plugin has been found.
  V 19.0.2
  Windows 8

  Firefox is usually able to detect the Flash plugin, so if you see this error there is probably another MIME type involved.

  You will need to check code (generated) page for object and embed tags to see if there is one with a missing MIME type attribute or a MIME type that is not covered by a plugin installed.

  • Firefox > Web Developer > Page Source
  • Tools > Web Developer > Source of the Page (Ctrl + U)
  • Right-click on a web page to open the shortcut menu, and then select View Page Source

• Satellite T130 - stuck on the loading screen - new hard drive required

  After a message on the screen saying back up your hard drive, it will fail quickly and pressing F1 it seems so stuck on the loading screen. I'm not too good with computers. I just have to buy a new hard drive to get the laptop working again, or is much more complicated than that. My guess is this one.

  Thanks in advance for any help provided

  The first question is: did you create recovery media (USB key)?
  If do not do this if for a long time your HARD drive works OK. original recovery image is saved on the HARD drive, but you must have it USB backup that you can use to install if the disk needs to be replaced.
  Do it as soon as possible. More info on what you can read in s operating manuals.

  What to do with the HARD drive? In my opinion if long as it works it has no reason to panic. Use your laptop as usual. If you notice some performance or more error messages problems I think that you should replace it.

  Replacing the HARD drive doesn't have to be so problematic. HARD drive cover must be placed in the lower corner of your laptop. The smallest is RAM and cotyledon should be for the HARD drive. Check it out.

  Before do you that this is remove the battery and unplug your computer laptop AC adapter / CC.

  If you have no experience with such things please don't made some risky step. You can damage something.

• HP 630 A6E72EA #ABV: hp 630 core i3 380 M with intel HD graphics driver required

  Hello

  I am so tired of looking for a graphic Driver for my laptop HP 630 (product number: A6E72EA #ABV).

  Processor: intel core-i3 380 m

  I looked about a year for driver for windows 8.1 and couldn't find, now I'm looking for windows 10 we.

  I'm almost hopeless finging for such driver.

  every driver I try to give the message

  

  Thank you!

  Hello:

  I would try to manually install the W7 x 64 graphics driver.

  Download and run this driver.  If the graphics works then great.  If it isn't...

  http://h20564.www2.HP.com/hpsc/SWD/public/detail?sp4ts.Oid=5086783 & swItemId = ob_97076_2 & swEnvOid = 4059

  Go to Device Manager and click to expand the display adapters category.

  Click on the graphics card of Microsoft Basic.  Click the driver tab.  Click on set to update driver.

  Select her browse my computer for driver software option and find the folder of the driver that was created when you ran the file.

  This file will be located in C:\SWSetup\sp53960.

  Make sure that the include subfolders is selected and see if the pilot goes like this.

  Then restart.

• HARD drive error message appears on my Satellite C

  I received the following message a week ago, it says error on the controller on hardisk1.
  Any solution please?

  Your HARD drive is SMART failure to predict who monitors the HARD drive, operating status.
  Your HARD drive is facing a problem and CHIP controlling the software predicts that the HARD drive will fail.

  Toshiba strongly recommends that you create a backup for the data on your HARD drive.
  Contact an authorized service provider to check your drive and buy a new drive for replacement if necessary.

  Hello

  I think the message says it all:
  The HARD drive fitness was checked and it looks like some problems were detected

  I recommend to save important data in case the HARD drive was going to die, you could restore again to leave another HARD drive, disk or flash memory

• HP Pavilion dv6-1242tx: updated driver required but not available to HP support.

  I noticed that my keyboard returns incorrect symbols as I type. A case occurs when I hit shift-2 poster 'symbol' instead of @. My PC has a QWERTY keyboard, and I am currently using regional (UK) English, the input parameters and the format.

  Also, when I go into my control panel / devices and material, I see the error message that is associated with my PC:

  Status: Driver is not available

  Status: Driver error.

  I have checked with the help of HP but have found that the driver for my model number and the operating system is not available.

  Can then someone suggest a source for a driver or a workaround?

  I noticed the warnings in support of HP related software vendors claiming to be affiliated with HP, so I thought I would ask this forum before you search the web.

  Thank you for your consideration of my problem in advance.

  Hello

  If the @ symbol is SHIFT + 2 key, then you have a style WE keyboard (the ' is on shift + 2 on a UK layout).  For this to work properly, you must select the United States keyboard layout - you can change your keyboard layout, as described at the link below.

  Change of keyboard - Windows 8

  Kind regards

  DP - K