driver usb visa problem

Similar Questions

• Code sign VISA raw driver USB for Windows 8

  Hi guys,.

  I wrote a LabVIEW program that communicates with a measuring using NI-VISA (class raw USB) USB device.
  With the development of Driver NI-VISA Wizard, I created two .inf files of drivers (for XP/2000 and 7/Vista).
  It works like a charm on my computer (Windows 7, 64-bit) and on the computers running Windows XP and 32-bit versions of Windows Vista and 7.
  I also have to work on 64 bit versions of Windows Vista and 7 using "disable driver signature enforcement" before installing the driver.
  Once the driver is installed, it is listed under "devices USB of NI-VISA" in the Windows Device Manager. After that I can reactivate the driver signature enforcement, the unit will continue to work, even after a reboot.

  Alas, in the 64-bit version of Windows 8 is not as simple as that. Yes, you can temporarily disable driver signing enforcement, but not on computers that use 'secure boot' or UEFI.
  I know that there are ways to disable booting UEFI's secure, but I don't want that on our customers computers. It seems wrong, and could introduce a large number of security problems.

  The next logical step would be to sign the device driver. Our company has a valid kernel mode code signing certificate and we signed the other drivers with it in the past.
  The problem is that I don't know how to sign my device in the NI-VISA database driver. According to the .inf file it uses WinUSB.sys, a Microsoft USB generic driver (part of the Windows Driver Kit, I think).
  Winusb.sys is already signed by Microsoft and that I could replace the signature, but that probably won't work without some tweaking inf and generate a new catalog file.

  Can someone please give me some pointers on where to start? As a reference, I have attached one of the inf files for this post. This inf file works on Windows Vista and 7.

  It is even possible to create a signed driver based on NI-VISA raw?

  Thanks in advance for your help.

  Paul

  Here's a knockout who described workaround.

  http://digital.NI.com/public.nsf/allkb/36DB8D6AC385052786257A940066A421

  What you have written, you need to generate a catalog (.cat) of the inf file (as described in step 1 of the KB) and then sign the .cat with your certificate file, the same way you would sign your other components. The inf and CAT are always distributed together. The inf file contains information about the cat file that has the signature, and the cat file contains the signature information. Since you have already been distributing the components signed with your own certificate, I'm sure you can understand the process, but please let us know if you have any other questions.

  Thank you

  Pankaj

• Installation of the minimum runtime for the program using the driver USB of NI-VISA personal

  I have a LabVIEW 2009 application that uses a driver for a USB device, created using the wizard of the Driver NI-VISA.  What my minimum installation of runtime needed to understand when I move it on a non-development machine?

  On my dev machine, I went to MAX and given my new camera USB one alias of VISA.  I think I'll meet trouble if my deployment includes no MAX on TIME machine.

  Right now, I guess the minimum is LabVIEW 2009 DURATION, NOR-DAQmx Configuration (including MAX) execution, duration of NI-VISA.

  If not, is there a method that avoids having to configure an alias altogether?  It would be nice to not not need NOR-DAQmx, I use not any material that my USB device with driver custom.

  Thank you!

  Not sure why you consider same installation DAQmx. You can install just MAX, the VISA duration and your harware MAX configuration. The installerallows of LabVIEW allows you to export the configuration, and then you select the option to import on the deployment computer. You will also need to include the installation of the inf file you created with the wizard.

• Need help to test the VISA interactive Control: Sorensen XBT32 - 3FTP USB connection problem

  Hello

  I use Windows 7. I installed the USB driver provided in this link:http://www.sorensen.com/products/XBT/XBT_Downloads.htm.

  Max is on the ASRL5: COM5 series & parallel in the Device Manager it is listed in the port: COM5

  I don't know how to test using VISA interactive control to ensure that the connection is established.

  Here are the parameters:

  Serial settings:

  Baud rate: 38400,

  Data bits: 8

  Stop bits: 1

  Parity: None

  I use the default settings for the other options such as flow control: none, Timeout = 2000ms etc.

  In the attributes view tab:

  Attribute: is the connected port

  Current value: error VISA: (Hex 0xBFFF001D) the specified attribute is not defined or supported by the referenced resource.

  I don't know if it's important.

  When I write * IDN? \n (bytes to read: 6), I return the Count: 6 bytes

  When I click on "Read Status Byte":, I get the following error:

  Error reading STB operation VISA: (Hex 0xBFFF003A) cannot start the operation because the installer is not valid (because of attributes defined in an inconsistent state).

  If I click on "Query", I get the following error: reading operation error VISA: (Hex 0xBFFF0015) timeout expired before the operation is complete.

  I also tried to create USB raw driver help driver of VISA Assistant. In this case I kept getting timeout errors: read operation error VISA: (Hex 0xBFFF0015) timeout expired before the operation is complete.

  Can you please tell me what I'm doing wrong?

  Thank you.

  Who cares about the number of bytes written? And configure the windows com port is not relevant. What is important is how you set the com port in the VI or max.

• problem with driver usb controller pavilion g7

  I need driver usb controller pavilion laptop g7

  PCI\VEN_184B103C & REV_03\3 & 2411E6FE & 1 & 80

  PCI\VEN_184B103C & REV_03\3 & 2411E6FE, 1 & 81

  Hello:

  You must install the AMD chipset driver and reboot.

  You want the first file on the Web page.

  http://support.AMD.com/en-us/download/chipset?OS=Windows 7-64

• For the Driver NI-VISA Wizard error

  Hello

  I'm getting a "ERROR-1073807175: field of bLength is incorrect for USB_ENDPOINT_DESCRIPTOR type" this error shows immediately after I click Next on the first screen of the wizard of the Driver NI-VISA.  I see no errors after the wizard creates the USB driver.  In fact, I write for the endpoint device USB 4 using this driver for NI-VISA.  My problem is that I can't read of 3 endpoint.  I don't know if this error has something to do with my problem.

  Is there a way can I fix?

  The version of the Driver NI-VISA is: 5.4.0.49152

  Fixed a problem.  Disconnect the USB hub that is built on my Dell Monitor Help.

  Thank you

  Pablo

• External hard drive USB on Time Capsule

  Hello

  I have an external USB hard disk and plug it into the USB port of my Airport Time Capsule makes it accessible wireless (if on the sidebar of the window under the section 'sharing' I click on the Time Capsule to enter airport name next to his record 'data', I also have a folder with the name of my USB HD and I can access).

  Now the problem. I have a USB external hard drive, I can access normally connect my iMac or iBook portUSB one, but, if connected to the time Capsule... nothing happens.

  So there must be a difference in the two external hard drive. What a difference creates the problem, why and what I can do is my question.

  Can someone help me?

  So far, here is what I found to be the similarities and differences:

  The two serial ATA, 2 to, partition GUID mapped external USB hard drive.

  In disk utility, one that is visible on the Time Capsule is displayed as 'external HARD disk support' physical disk with OS X extended physical volume. One who isn't appears as physical disk 'external media' with logic extended OS X volume.

  TX

  Hi Ranmaboy,

  I understand you have two external hard drives USB that you want to connect to your airport Time Capsule via USB, but one who is not recognized by the Capsule from the airport. Given that this player connects to your iMac without problem, I would recommend that you backup all data stored on the disk, and then follow the steps here to re - format the drive using disk utility:

  Backup disks, you can use with Time Machine - Apple Support

  Format a drive connected to an AirPort Extreme 802.11ac or Time Capsule

  If you are using an AirPort Extreme 802.11ac or Time Capsule, you can connect an external drive to the USB port on these devices for use with Time Machine. Follow these steps to reformat the hard disk in the first place, it is ready for use.

  1. Connect the hard drive to a USB port on your Mac.
  2. Open disk utility.
  3. On the left side of the disk utility window, select your external drive (or one of its partitions).
  4. Click the delete or delete button on the toolbar.
  5. On the Format menu, choose Mac OS extended (journaled).
  6. Type a name for your drive, and then click clear.
  7. After that the drive is deleted, close the disk utility window.

  Once the disk has been reformatted, try to connect this back to the airport Time Capsule to see if it is now recognized.

  Have a great rest of your day!

• New driver USB on my laptop Portege of loading

  I have problems with a site I subscribe to who went through an upgrade.

  The website said that the problems were because he was a blocker adware on the cell, preventing the load correctly the site.

  I deleted all suspicious looking for programs, and although the site now works perfectly when I go to eject a USB device instead of seeing the listed devices I see...

  To work around this, I tried to reload the driver USB from Toshiba, but I get the following message:

  A later version of Renesas Electronics USB 3.0 host controller driver is already installed on the machine.
  The implementation cannot continue.

  I need to remove the driver completely then re - install?

  > when I go to eject a USB device instead of seeing the devices listed, I see...

  I'm afraid that your message isn't clear enough of m.
  What problems do you have exactly with USB ports?
  You can use all the USB devices connected to USB ports?

  What Portege laptop and how Windows system you have exactly?

  The USB driver that you found seems to be already installed on your laptop and the new facility isn't necessary.

  However, please answer my questions above for more information on the issue.

• Mini Toshiba external driver.usb 2.0

  I bought a mini PC 7 android.
  I also bought a mini external pilot, when I put the USB in the mini PC
  It connects fine to the TI says it is u-disc. It's a (mini Toshiba external driver.usb 2.0)
  I put a few pictures to test, but he says always the same.
  in the settings it says (not available)
  could you please help me
  Thank you

  system: mini PC 7 android
  version 2.2
  kernel version 2.6.32.9 - default
  build number froyo generic - Eng2.2 ver1.5.5 - 20110920.103830

  Hello

  Do you have the same connection error an another USB 2.0 external HARD drive or a USB flash memory stick this laptop?
  Test this
  Maybe this problem of HARD drive.

  USB 2.0 provides a power of 500 my if an external USB HDD or USB device needs more power, a problem may appear.
  In such cases its recommended to connect a USB hub with an external power supply between the laptop and the USB device

• Satellite C660-28V - USB hub problem

  Hello

  1st of all I'm not at all English-speaking countries so forget all accidental that confuses a may (and I will approve me) write down.

  So, how do I write about this threat, I have problem with my usb hub that I try to explain what exactly past in my book but the 1st I have satellite model n. c660-28v part No. psc1ge-03j008cz running win7/64 and on Toshiba support article for this specific book cant find any generic hub driver usb or any driver related to USB in all the

  Some about 2 months I reinstall my OS not with recovery, but with clean OS and I have the problem since.
  Since then im not able to find or fix this something driver works but not all... some external drives, flash, mouse, keyboards readers work at all before re-installing everything works fine.

  Its not so bad, but sometimes it drives me crazy, especially in times when im in a situation of time when I have no time for disorders like that readers

  Book always telling me that I have the latest drivers even after uninstalling and rebooting.
  If this is not enough given just ask

  Thx for advice or support that u can give me

  Suzeline

  Hello

  I ve checked specification for your laptop and I can see your laptop was initially offered with Win7 64 bit so I do not understand why you do not use this original version.
  You can install the original recovery image and optimize it to your needs.

  OK, you may want to have the Ultimate version and your own installation of operating system should not be a problem because all the necessary drivers, tools and utilities that you can download drivers Toshiba download page - http://www.toshiba.eu/innovation/download_drivers_bios.jsp

  Of course, that we know not what you have installed and how it looks like when you open Device Manager. All hardware installed and registered correctly?

  In any case, I can say, is that all the drivers for Win7 64 bit, tools and utilities are available, and you must install all the.
  The right installation order is as follows:
  Windows 7 64 bit
  TOSHIBA Assist
  Chipset SW installation utility
  Intel Management Engine Interface
  Intel driver
  Intel Rapid Storage Technology driver
  Realtek Audio Driver
  TOSHIBA supervisor password utility
  TOSHIBA HW utility
  TOSHIBA Flash Cards Support utility
  TOSHIBA Value Added Package
  Realtek LAN Driver
  Synaptics Touch Pad Driver
  Realtek card reader
  Bluetooth Stack for Windows by Toshiba
  Wireless LAN driver
  ConfigFree
  TOSHIBA Network Device ID registry tool
  TOSHIBA Web Camera Application
  TOSHIBA face recognition
  TOSHIBA HDD_SSD alert
  TOSHIBA Service Station
  TOSHIBA Disc Creator
  TOSHIBA Media Controller
  TOSHIBA Media Controller Plug - in1.0.5.11
  TosVolRegulator_x64_1.1

• Satellite A30-514: no driver USB

  Hello, first post here so be gentle please...

  Just re-formatted your laptop Satellite of friends as he managed to corrupt the windows, but we have not formatted to a non-original disc so no drivers etc - my problem is the USB driver. I'm using this link USB Driver
  Microsoft Windows 2000 5.1.2600 support page, but I cannot get his execution.

  When I click on it or run I get a set of icons, but none of them are setup etc., and when I click on the icons of all kinds of strange data appear.

  To sum up: no driver USB; has got the folder but cannot run files - help me please :-)

  Thanks - Mamoun

  Post edited by: Mamoun

  Found http://askiris.toshiba.com/ToshibaSupportSite/search.do?cmd=displayKC&docType=ex&bbid=bb55&url=& dialogid = 11350459 & stateId = 1% 200% 2011352178 on the forum here and it works - thank you. BB

  Hello

  Thanks for the information and it is nice that you have solved the problem.

  PS: Welcome to our community ;)
  Good bye

• How to start the wizard for the Driver NI-VISA development

  IM reading this manual:

  http://zone.NI.com/DevZone/CDA/tut/p/ID/4478

  I have labview8.6 on this pc, and I installed the driver NI-VISA 4.6... the manual says:

  "" "" 1. to open the DDW, select Start ' programs ' National Instruments ' VISA ' VISA Driver Developer Wizard.

  but the thing is, the menu of VISA, there are a few documents... There is no VISA Driver Developer Wizard... but I installed the driver NI-VISA 4.6... any ideas?

  In fact this explains the problem. You install DURATION VISA. If you re-run the installation program, you will see the feature tree seems different from that displayed a stone.

  The component you need, driver development Assistant, is in full VISA distribution, which you can download from the link below. The runtime is usually designed for deployed application. The development tools are absent of the runtime and are in the full distribution.

  http://Joule.NI.com/nidu/CDs/view/p/ID/1370/lang/en

• sick it be an app or driver USB available for down load Martin Light Jockey?

  OT: SERATO & Martin Light Jockey.

  Is simple, every time I get the upgrade is a problem, not so much with SERATO, but with Martin Light Jockey, it is difficult to obtain the application for the new high grade, I make a living on the programming of lighting and as much as you (Microsoft) make changes is a scramble for weeks or months also

  Is great that up grade and is simple for the majority, but the PC by far for me is better than MAC, I go to always give props, but my question is: is there an app or driver USB available to down load Martin Light Jockey on your new high grade with out need to have someone make you a BETA version be available or (Microsoft) will take care of those who use the items here daily life

  Hello

  What version of Windows are you using?

  LightJockey2 is compatible with Windows 7 and Windows 8.  Check the compatibility of the software in the Windows Compatibility Center.  Just type the name of the software in the search box.

  http://www.Microsoft.com/en-us/Windows/compatibility/CompatCenter/home

  Ex: compatibility Serato

  Software (s) compatible with Windows 8.1 is compatible with Windows 10.  But, as I said above, use the Windows Compatibility Center.

• Uninstall the Driver nor visa 3.0.1 to install 4.2

  Hi all

  I need to install the Driver or visa 4.2, but should I uninstall visa or 3.0.1 firstly to let the 4.2 to be effective.

  But I have some problems to uninstall the Driver nor visa 3.0.1.

  I wait your help for how to uninstall it.

  Thank you

  Thank you for your attention.

  I'm new on this. I just found how I can uninstall it from Add/Remove control panel part.

  Thanks for your time

  Problem is solved.

• How Windows XP Setup (F6) to use an instead of a floppy drive usb flash drive to find the drivers for a disk sata hard

  Hello

  How can I install Windows XP Setup (F6) use an instead of a floppy drive usb flash drive to find the drivers for a disk sata hard.

  Kind regards
  Imane

  Hi Mike,.

  You can not install it. This must be done using the floppy drive. This feature is available for Vista and Windows 7.

  Visit our Microsoft answers feedback Forum and let us know what you think.