Driver UVC USBVideo.sys in Vista and 7, not as good as XP

Similar Questions

• I need a driver/files mouhid.sys, my mouse support does not work. Please thank you!

  I need a driver/files mouhid.sys, my mouse support does not work.  Please thank you!

  Hmm, a strange thing to have disappeared.  Do you have a virus or checked for malware scanner?

  The mouhid.sys file is supposed to be in % systemroot%\system32\drivers.  You pouvez find a copy of it in % systemroot%\dllcache.  If it's not in... \drivers and is in... \dllcache, recopy the... \drivers.  (You may need to do this in Mode safe.)

  Except for the above bit of luck, there are several ways to recover.

  1. use msconfig:

  Get your installation CD or locate a copy online
  Since an administrator account, run msconfig ( -R, msconfig)
  When "msconfig" opens, select the "Général" tab and click on the button "expand file...". »
  (This will open the window to "Develop a Source of Installation file")

  Enter 'mouhid.sys' in "file to restore:
  Enter the path to the DRIVER. CAB file in the \i386 on your installation media directory.
  (or browse to...)
  Enter "c:\windows\system32\drivers" in the "save in:" entry.
  Click "expand".
  'mouhid.sys' is now where never told you develop to...

  2 use the utility auditor of system files (SFC) to check the missing files and restore them if necessary.
  You will again need your installation media and, if you have installed the Service Packs, the CD-ROM for
  the latest Service Pack, you have installed.

  From an administrator account, type: -R, sfc/scannow

  SFC calls for, first of all, your installation media, and then later the service pack CD-ROM.  If SFC wants to replace the files, leave.  If the SFC rejects your Service Pack CD-ROM, read the KB900910 Microsoft Knowledge base article.  Note that this article applies to SP2, but is also applicable to the SP3.  Just use your common sense and use SP3 where the article refers to SP2.

  If you don't have a CD-ROM Service Pack 3, or order it (U.S. / Canada , Europe, Africa , Asia or South America ) from Microsoft or download the ISO (here ) and burn it.  Be sure to Select the appropriate language if you download ISO.  Note, I recommend that you install Service Pack 3 on a CD-ROM, rather than through Windows Update so that youpouvez use SFC with success!

  Please, vote if it is useful!  Please, click on Mark as answer if that answers your question.

• Samsung TS-H653G DVD burner, I have this unit in my Dell Inspiron but D drive disappeared from the computer screen and will not reinstall successfully.

  I have this unit in my Dell Inspiron but D drive disappeared from the computer screen and will not reinstall successfully. Possible solutions please

  I have this unit in my Dell Inspiron but D drive disappeared from the computer screen and will not reinstall successfully. Possible solutions please

  Hello

  See how you go with this great piece of software.

  http://www.thewindowsclub.com/repair-fix-Windows-7-Vista-problems-with-FixWin-utility

  Concerning

  GT4U

• I am runing vista and do not know how to use the fax machine

  I am runing vista and do not know how to use the fax machine

  Here's how to set up Windows Fax and Scan: http://windows.microsoft.com/en-us/windows-vista/Set-up-your-computer-to-send-and-receive-faxes.  Navigate the reference links on the right for more information on how to send faxes and other information.  If you do this on every page you just, you can see all the articles on how to fax and scan and configure the system and solve problems, and many other subjects that may be necessary, useful or informative.  After that, you must be an expert on this subject.

  Here is a quick and easy way to send a fax in Vista: http://www.ehow.com/how_2029566_send-fax-vista.html.

  Unfortunately, the foregoing is available in Business, Enterprise, and Ultimate - not Basic or Home Premium.  In the latter, you need a 3rd party program.  If this is the case, here are some options:

  With the compliments of Bob F. http://www.vistax64.com/vista-print-fax-scan/127986-how-do-i-download-windows-fax-scan.html:

  Not available in Vista Home Premium Basic FAX. It is available in complete edition,
  Extreme and business.

  You might want to consider Snappy Fax at a low cost:
  http://www.snappysoftware.com/

  or the free version of BVRP:
  http://www.usr.com/BVRP/bvrp.asp

  or a full BVRP Classic Phone Tools 9: $29.90
  http://www.shop.Avanquest.com/USA/PR...S_CPT_homepage

  Look screen kinda gross but the product Snappy fax
  actually, is quite rich in features and works very well. BVRP also works very well,
  screen looks a bit better. Other that that, there are minor differences
  performance between the two.

  I hope this helps.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• CD/DVD drive no appears in Device Manager and is not opening?

  Hi when I click to open my DVD/CD drive it does not open upward. Or it appears in Device Manager. I unplugged and plugged in I tried to use microsoft fix it. Nothing worked for me.

  Photo of him, not in Device Manager:
  http://i397.Photobucket.com/albums/PP56/nirvanaking95/dvdcddrivenotworking.jpg
  I JUST INSTALL WINDOWS VISTA SINCE WINDOWS 2000 IT HAS WORKED VERY WELL ON THE 2000!

  Hello

  Step 1: Please do all the same underneath if you did some before as is often total
  a process that solves the problem.

  Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
  Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
  RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
  below.
  
  Then, work your way through these - don't forget the drive might be bad, could be a coward
  cable or slight corrosion on the contacts (usually for a laptop) and other issues.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  Try this fix manually if the Fixit 314060 does not work
  http://www.pchell.com/hardware/cd_drive_error_code_39.shtml

  Your CD or DVD drive is missing or is not recognized by Windows or other programs-
  a Mr Fixit
  http://support.Microsoft.com/kb/982116

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
  for Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error in Windows
  Vista installation after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
  ends. Remove and replace, do not just tight. For laptops, you can often clean power and
  contacts data with a pencil eraser.

  Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
  manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

  ===============================

  Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD
  Burn and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
  do it right.

  Did you follow the Troubleshooting Guide for the reader who still does not work? There are
  the entries in registry that the troubleshooter does not solve and those who "might" be the cause.

  Check with your Maker system and a device for the two possible firmware updates and
  the correct registry entries for your car.

  Here are the keys that I of course are those in question - for the subkeys of the CD/DVD drive
  as there will be other subkeys in these keys. Do not forget to ask specific keys involved as well as
  the parameters.

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  -----------------------------------------------------------------------

  You can probably find more info here and maybe even the exact registry for your CD/DVD settings
  drive from someone with the same model.

  Forums - a lot of expert real help
  http://Club.myce.com/

  CD/DVD units
  http://www.myce.com/storage/

  Use DevManView to locate the CD/DVD in the registry (be careful and do a prior Restore Point)
  nothing change) - find the DevManView device and then make a right click on it free in RegEdit.

  DevManView - free - an alternative to the standard Windows Device Manager, which displays all the
  devices and their properties in flat table, instead of the tree viewer
  http://www.NirSoft.NET/utils/device_manager_view.html

  I hope this helps.

• Lightomm detected vista and does not want to reinstall so I have windows 7 pro

  Hello

  My Lightrrom wants more educational, it shows me a window:

  "this action cannot be completed because the other program is busy. "Choose Your Language participated to pour activate the busy program and correct the problem.

  Could not switch to other chosen... when I arrive has close Lightrrom window is unresponsive and crashes.

  I uninstalled the decompression program I'd just install (little Finder I think, well that would be the cause...), rebooted and rebooted again and again... always the same... I removed my Norton and the of to set up... even restarted Avast... But still the same...

  I tried to reinstall Lightroom, but it detects a Windows vista and gives me a "not met minimum configuration of the operating system" while I am running Windows 7 pro 64-bit

  I can't remember what to do...

  Thank you for your help

  Rabia

  Is your Windows 64-bit?

  Try changing the compatibility mode of Windows 7 configuration file and run the installer again.

  -Right click on the Installer file and select Properties option

  -Then click on the Compatibility tab

  -Put the Windows 7 operating system and rerun

• Driver_irql_not_less_or_equal blue screen Vista and can not restart

  My PC Win Vista (not sure if 32 bit or 64) continues to display blue screen. Today, he continues to display blue screen when starting, and I can not even accept F8.

  Here's what it shows the blue screen before. Hope you could give me some advice what I can do next. Thank you!
  
  A problem has been detected and windows has been shut down to prevent

  damage to your computer.

  DRIVER_IRQL_NOT_LESS_OR_EQUAL

  If this is the first time you have seen this Stop error screen, restart

  your computer. If this screen appears again, follow these steps:

  Check to make sure any new hardware or software is installed correctly.

  If this is a new installation, ask your hardware manufacturer or software

  the windows updates, you might need.

  If problems continue, disable or remove any newly installed or

  software. Disable the BIOS memory options such as implementing caching or shading.

  If you need to use Safe Mode to remove or disable components, restart your

  computer, press F8 to select advanced startup options, and then select

  Safe mode.

  Technical information:

  STOP: 0X000000D1 (0X00000000, 0X00000002, 0X00000000, 0X855F7395)

  nvstor.sys - address 855F7395 base at 855F3000, DataStamp

  46671a 61

  Hello

  nvstor.sys is a Nvidia video driver.

  Think video drivers especially if it may be others. Refer to the section of driver in my generic bluescreen
  methods of troubleshooting below. BIOS, low and antispyway/antivirus/security chipset drivers
  programs may also cause this. Check the resolution of problems and when you get to the section driver view
  for generic methods in the next message and then back to the if necessary troubleshooting tool.

  Look in the Event Viewer to see if something is reported on.

  http://www.computerperformance.co.UK/Vista/vista_event_viewer.htm

  -------------------------------------------------------------------------

  My troubleshootter of bluescreen generic, when you get to the section driver go to the next message, then
  return to this one.

  Here are a few ways to possibly fix the blue screen issue. If you could give the info from the blue screen that would be
  Help. Such as ITC and 4 others entered at the bottom left. And any other information such as STOP error
  codes and info like IRQL_NOT_LESS_OR_EQUAL or PAGE_FAULT_IN_NONPAGED_AREA and similar messages.

  As examples:

  BCCode: 116
  BCP1: 87BC9510
  BCP2: 8C013D80
  BCP3: 00000000
  BCP4: 00000002

  or in this format:

  Stop: 0 x 00000000 (oxoooooooo oxoooooooo oxoooooooo oxooooooooo)
  Tcpip.sys - address blocking 0 x 0 00000000 000000000 DateStamp 0 x 000000000

  It is an excellent tool for displaying the blue screen error information

  BlueScreenView scans all your minidump files created during 'blue screen of death' crashes, and displays the
  information on all accidents of a table - free
  http://www.NirSoft.NET/utils/blue_screen_view.html

  BlueScreens many are caused by old or damaged drivers, video drivers in particular, but there are other causes.

  You can follow these steps in the Safe Mode if necessary or the command prompt Vista DVD or Options of recovery if your
  system installed by the manufacturer.

  This tells you how to access the System Recovery Options and/or a Vista DVD
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  You can try a system restore to a point before the problem started when one exists.

  How to make a Vista system restore
  http://www.Vistax64.com/tutorials/76905-System-Restore-how.html

  -----------------------------------------------------

  Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  The log can give you the answer if there is a corrupted driver. (Says not all possible driver problems).

  Also run CheckDisk, so we cannot exclude as much as possible of the corruption.
  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  ------------------------------------------------------------------

  Often drivers up-to-date will help, usually video, sound, network card (NIC), WiFi, 3rd party keyboard and
  smile, as well as of other major device drivers.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  How to install a device driver in Vista Device Manager
  http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  ------------------------------------------------------------------
  How to fix BlueScreen (STOP) errors that cause Windows Vista to shut down or restart unexpectedly
  http://support.Microsoft.com/kb/958233

  Troubleshooting, STOP error blue screen Vista
  http://www.chicagotech.NET/Vista/vistabluescreen.htm

  Understanding and decoding BSOD (blue screen of death) Messages
  http://www.Taranfx.com/blog/?p=692

  Windows - troubleshooting blue screen errors
  http://KB.wisc.edu/page.php?id=7033

  ------------------------------------------------------------------

  In some cases, it may be necessary.

  The Options or Vista recovery disk Startup Repair

  How to do a startup repair
  http://www.Vistax64.com/tutorials/91467-startup-repair.html

  This tells you how to access the System Recovery Options and/or a Vista DVD
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  I hope this helps.
  Rob - bicycle - Mark Twain said it is good.

• Drive hard USB is write protected and will not run backup

  After the upgrade from Vista to 7 I formatted a drive hard Maxtor Plus and backup is complete with image.  A week more later in a attempt to a backup I received a message that the backup failed, disk is write protected.  I tried to take possession through the prompt command > takeown /f e: and received message disk is write protected.  Formatted drive in another computer with XP, then windows 7 machiene always write protected. Attempted to seize properties.  current owner is a numerical value of the letters about 35.  Will not let me take ownership as administrator again tells me disk is write protected.  Is it possible to remove the write protection this drive E:

  Thank you for your response.  It was not a strategy of storage devices in my registry.  I tried to create it manually. I was able to get a folder, but the value is default.  Not believing that I could create the key correctly, that I resorted to restore my system before the first backup and I got access to the external drive at this time.  I will install a new backup and hope that I find not write-protected again.

• Cannot access an external hard drive lost, encrypted BitLocker recovery key and do not know where to enter the password to unlock it.

  I recently installed Windows 7 Ultimate, 64-Bit on a Sony Vaio. Worked great, seems awsome and rolls GOOS GOOS, for a new operating system. I decided to use the BitLocker feature that I wanted to use from Vista Ultimate, which was incredibly dificult unlike BitLocker in Windows 7, which is extremely simple to use. So simple in fact, I encrypted my external hard drive Verbatim 160 Gig where the original BACKUP files are with ALL my original documents, settings and files of the company are located. I haven't used a USB key, or don't have I recorded the RecoveryKey, I printed and completely loses it, I remember perfectly well the password I used. Problem is I have NOW, I can't ACCESS MY HARD DRIVE! When I try to access the hard drive it asked me not the password recovery key. Please help me, im in deep poopie. I wish I could change the world, if only I could find a diapper big enough to hold so many things...

  Hey thanks for the reply Kev, but I must say that I did and didn't. The new Windows 7 operating system has this feature built-in and it is much easier to use. So yes I did it, but I made using windows 7 have where, instead of download all the files, I just insert the original DVD of WIndows 7, I restart my PC and follow the instructions of recovery of BitLocker recovery key, and voila. The problem is that I've NEVER stored on this particular external hard drive recovery key. BTW: I tried to follow the steps mentioned by Mr. Vijay but inconsistent tool with my operating system (Windows 7 64-Bit) it only works with Vista (not 150 percent certain but close). Please correct me if Im wrong. I wish I could change the world, if only I could find a diapper big enough to hold so many things...

• I reinstalled Windows Vista and can not reactivate with my key now... What do I do?

  Hello. I own a copy of Windows Vista Ultimate x 64.  It's the Builder pack and I used this license for 2 other computers I built bringing the total number of machines to 3 that it runs currently on.

  My question is this... I did a clean install on my PC twice since the original version, and now I can't reactivate Windows, what should I do?

  I don't have anything in the original documentation that came with the program which provides a limit to how many times this key could be used to register Windows.

  Any help with this is greatly appreciated... Windows expires today if I can't find a way to activate it :(

  If it's a plain OEM version is good for 1 activation, there is "Generator of Packs" as similar to Amazon I post that are good for 3 activations: http://www.amazon.com/Microsoft-Windows-Ultimate-32-bit-Builders/dp/B000LP5EMS

  How to activate Windows 7 or Vista manually (activate by phone)
  http://support.Microsoft.com/kb/950929/en-us

  1) click Start and in the search for box type: slui.exe 4
  (2) press the ENTER"" key.
  (3) select your "country" in the list.
  (4) choose the option "activate phone".
  (5) stay on the phone * do not select/press any option * and wait for a person to help you.
  (6) explain your problem clearly to the support person.
  (7) the person must give you a confirmation ID, copy it down on paper,
  (8) check that the ID is correct in reading the support person.
  (9) to enter the ID number, then click 'Next' to complete the activation process.

  Activation and registration of a Microsoft product
  http://support.Microsoft.com/?kbid=326851
  Windows activation: (888) 571-2048
  (888) 725-1047 or 800-936-5700

  ----------------------------  Alternatives -------------------------------------

  To enable the use of the phone

  1. open Activation of Windows by clicking on the Start button, right click on computer, clicking Properties.
  then by clicking on activate Windows now. ?

  2. click on show me other ways to activate.

  3 type your Windows 7 product key, and then click Next.

  4. click on use the automated telephone and then click Next.
  If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  5. click on the location nearest you from the drop-down list, and then click Next.

  6. call one of the available phone numbers listed. An automated system will guide you through the activation process.

  7. When prompted, enter the installation ID that is listed on your screen in your phone keypad.

  8 Note the confirmation ID the phone system gives you.

  9. under the terms of step 3, type the confirmation ID in the space provided, click Next, and then follow the instructions.

  10. If the activation is not successful, stay on the line to be transferred to a product activation agent who can help you.

  How to contact a Microsoft Product Activation Center by phone
  http://support.Microsoft.com/kb/950929

  Microsoft Activation centers worldwide telephone numbers:
  http://www.Microsoft.com/licensing/existing-customers/activation-centers.aspx
  (This site is for activating Volume License, but if you call, they will help you)

  The phone number is not working:
  Microsoft Wordwide contacts: http://www.microsoft.com/worldwide/default.aspx

  J W Stuart: http://www.pagestart.com

• TRYING TO IMPORT VIDEO AND DOES NOT SAY GOOD CODEC

  Cannot import the file C:\Click to 2\P2007-1202-142821\ExLive793dd5.mpg DVD because the necessary codec to play the file is not installed on your computer. If you have already tried to download and install the codec, close and restart Windows Movie Maker, and then try to re-import the file.

  Hello

  Looks like you need to download a codec package full, K-LITE is popular.

  http://www.free-codecs.com/k_lite_codec_pack_download.htm

• Sharing data between Windows Vista and Windows 7

  As Windows Vista cannot join the homegroup, which is a feature of Windows 7, how the files, folders or drives are shared between Windows Vista and Windows 7?

  Hello

  Set you up a network between Vista and Windows 7:

  "Networking of computers running different versions of Windows.

  http://Windows.Microsoft.com/en-us/Windows/networking-home-computers-running-different-Windows#networking-home-computers-running-different-Windows=Windows-Vista

  http://Windows.Microsoft.com/en-us/Windows/networking-home-computers-running-different-Windows#networking-home-computers-running-different-Windows=Windows-7

  "Learn how share files and printers on a network with computers running.
  Windows XP, Windows Vista and Windows 7. ... This article also covers the
  necessary parameters to set up file and printer sharing on your network. »

  See you soon.

• Failure of Windows Vista and the SafeMode of startup failure - crcdisk.sys

  Hello

  I have a Dell Inspiron laptop computer 2 GB RAM. He had a few months now, and everything has been fine.

  Started a few days ago from freezing occasionally so I was forced to restart. CTRL + ALT + DELETE has refused to do anything and so I had to manually remove the battery.

  A frozen about three times and then once rebooted showed the BSOD saying something the system failure.

  So I rebooted once more and now it restarts just without going on the login screen. I tried to run in safe mode, but it gets stuck on crcdisk.sys or goes in an endless process to restart again.

  Is there anyway that I might be able to get back on without doing a full factory reset, as I have all my work stored on the hard drive integrated without backup.

  I can open the system recovery options, but none of these options seem to work. All my points of recovery have been removed.

  Startup Repair doesn't indicate a problem with the system, so I thought maybe it was a virus? The same thing happened to my wife a few days ago computer and that uses the same Wifi network as me.

  Jacob.

  To search for malicious software, you must do in Mode safe mode with networking, but you say that you can not get the Options.

  There is information below data recovery.

  And Startup Repair Info, too.

  Data recovery:

  1. slave of your hard drive in another computer and read/save your data out there.

  2. put your Hard drive in a USB hard drive case, plug it into another computer and read/save from there.

  3 Alternatively, use Knoppix Live CD to recover data:

  http://www.Knopper.NET/Knoppix/index-en.html

  Download/save the file Knoppix Live CD ISO above.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  http://isorecorder.alexfeinman.com/isorecorder.htm

  Download the Vista software from the link above.

  After installing above ISO burning software, right click on the Knoppix ISO file > copy the Image to a CD.

  Knoppix is not installed on your PC; use only the resources of your PC, RAM, graphics etc.

  Change the boot order in YOUR computer/laptop to the CD/DVD Drive 1^st in the boot order.

  Plug a Flash Drive/Memory Stick, BOOT with the Live CD, and you should be able to read the hard drive.

  When the desktop loads, you will see at least two drive hard icons on the desktop (one for your hard drive) and one for the USB key.

  Click on the icons of hard drive to open and to understand which drive is which.

  Click the icon for the USB drive and click on "Actions > Change the read/write mode" so you can write to disk (it is read-only by default for security reasons).

  Now to find the files you want to back up, just drag and drop them on the USB. When you're done, shut down the system and remove the USB key.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  If Safe Mode does not and you do not have a Vista DVD from Microsoft, do a repair disc to do a Startup Repair:

  Download the ISO on the link provided and make a record of repair time it starts.

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu.

  When you have changed that, insert the Bootable disk you did in the drive and reboot.

  http://www.bleepingcomputer.com/tutorials/tutorial148.html

  Link above shows what the process looks like and a manual, it load the repair options.

  NeoSmart containing the content of the Windows Vista DVD 'Recovery Centre', as we refer to him. It cannot be used to install or reinstall Windows Vista, and is just a Windows PE interface to recovering your PC. Technically, we could re-create this installation with downloadable media media freely from Microsoft (namely the Microsoft WAIK, several gigabyte download); but it is pretty darn decent of Microsoft to present Windows users who might not be able to create such a thing on their own.

  Read all the info on the website on how to create and use:

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  ISO Burner: http://www.snapfiles.com/get/active-isoburner.html

  It's a very good Vista startup repair disk.

  You can do a system restart tool, system, etc it restore.

  It is NOT a disc of resettlement.

  And the 32-bit is what normally comes on a computer, unless 64-bit.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  Dell recovery options:

  http://supportapj.Dell.com/support/topics/global.aspx/support/DSN/en/document?journalid=67E9C215C4BABD6CE040AE0AB5E14F05&docid=339949

  Above is Dell to reinstall Vista from the DVD on your computer.

  http://supportapj.Dell.com/support/topics/global.aspx/support/DSN/en/document?journalid=67E9C215C4BABD6CE040AE0AB5E14F05&docid=336966

  And that way if you have a recovery partition on your hard drive.

  See you soon

  Mick Murphy - Microsoft partner

• Vista and Tecra S1 - need new Display Driver

  Hi all

  I hope you can help me.
  I installed Vista Ultimate on my Toshiba Tecra S1 (of control), but I have no correct video driver. Only for Windows XP Home display-ts1-xp-614106476 driver is not accepted by Vista and my Tecra with Videodriver standard but graphic short is very slow.

  Is there a solution?

  Thanks a lot for your answer

  Regards Wolfgang

  Hello

  To my knowledge, the Tecra S1 was delivered with the graphics card of 32 MB ATI MOBILITY RADEON 9000 graphics card.
  On the Toshiba page you will certainly find no Vista drivers for this device.

  I think 3rd websites and goggling in internet research is your last resort

• installed the game CD Gears of War on my computer (Windows VISTA) and make me "Please insert the correct DVD - ROM, click OK and restart the application" - but the disk is IN the drive.

  original title: Gears of War for PC (Vista)

  I installed Gears of War game CD on my computer (Windows VISTA) and make me "Please insert the correct DVD - ROM, click OK and restart the application" - but the disk is IN the drive.  I've been on the net and does not know what is the problem and why this game will not run.  I've installed, uninstalled, reinstalled tried to run as administrator, got the latest patch, all the things that have said all sites to do - anyone have any ideas?  Any help would be appreciated!  Thank you!

  Hi NoOneSpeciale,

  It is very possible that your CD may be damaged.  Is it possible to get another copy to try on your machine? Or try this copy on another machine to see if it works or not.
  Also check in control panel--> system--> for you Device Manager make sure that there is no yellow/red icon next to the CD player and it's function correctly.

  Let us know the result, Kevin
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.