Driver\WUDFRd

Similar Questions

• The \Driver\WUDFRd failed to load the device driver USB\VID_0483 & PID_2016\5 & 295bd535 & 0 & 2.

  WUDFRd failed to load of the device

  Hello

  I did a clean install of Windows 7 64 bit and everything goes fine until I started to add the specific drivers of lenovo t61p.  I get the following in the Event Viewer error message:

  The \Driver\WUDFRd failed to load the device driver USB\VID_0483 & PID_2016\5 & 295bd535 & 0 & 2.

  After a lot of Googling, I found that the usb device is a fingerprint reader.  remove the fingerprint reader drivers removes the error in Event Viewer.

  AuthenTec TouchChip fingerprint coprocessor uses the v1.5.0.289 driver.  their website States that the error is a problem with Microsoft.  See this link:

  http://support.AuthenTec.com/Knowledgebase/KBview/tabid/843/ArticleID/443/WUDFRd-failed-to-load-for-the-Device.aspx, or search their Knowledge Base for "WUDFRd failed to load for the device.

  I see that the other members of the forum answers have similar problems, but they still have to find a solution.  is that someone in Microsoft could provide an update for a fix?

  Yes! After two years, I found a solution.  I installed a previous version of Lenovo sw fp and it fixes attention on win 7 sp1 2 t60.  I've been running for about 3 weeks and warning went on two PCs. then, download and install IN1FGP08WW1.exe.  It is fp s-o of Lenovo in UTEK and there the pilot to clear the warning.  BUT it's not as safe as the current Lenovo sw fp.  Apparently, she was abandoned when authentic bought UTEK because of this.  as I understand it, if someone has physical access to your pc they can decifer pw of windows in the registry.  This isn't a big problem for me.

• Error message = the driver failed charging USB\VID_0A5C & PID_5802 & MI_01\7 \Driver\WUDFRd & 95fd152 & 0 & 0001.

  WARNING on 13/10/2011 11:06:08 Kernel - PnP 219 (212)

  Log name: System
  Source: Microsoft-Windows-Kernel-PnP
  Date: 13/10/2011 11:06:08
  Event ID: 219
  Task category: (212)
  Level: WARNING
  Keywords:
  User: SYSTEM
  Computer: Buzz_Murdock-PC
  Description:
  The driver failed to load the device USB\VID_0A5C & PID_5802 & MI_01\7 \Driver\WUDFRd & 95fd152 & 0 & 0001.
  The event XML:
  http://schemas.Microsoft.com/win/2004/08/events/event">
   
     
      219
      0
      3
      212
      0
      0 x 8000000000000000
     
      145356
     
     
      System
      Buzz_Murdock-PC
     
   
   
      44
      USB\VID_0A5C & PID_5802 & MI_01\7 & 95fd152 & 0 & 0001
      3221226341
      14
      \Driver\WUDFRd
      0
   
  

  I know it's fine... I had the same problem and I stopped the error... I went into services.msc and last 'Manual' under 'Windows Driver Foundation - User - Mode Driver Framework' to 'automatic '.
  This stopped the error in Event Viewer.  It worked for me!

  According to microsoft, the error is benign... It's just a matter of latency.

• Satellite C50D-A-12 x often - block pilot WudfRd

  I have a Toshiba satellite C-50 d-a-12 x with windows 8.1 and often it crash and sometimes arrest.

  Appears in the event log each time as an Advisor:

  Registro Nome: System
  Origin: Microsoft-Windows-Kernel-PnP
  Data: 22/01/2014 12:45:37
  Event ID: 219
  Categoria Attività: (212)
  Level: th
  Word key:
  User: SYSTEM
  Computer:
  Description:
  Impossibile caricare he pilot \Driver\WudfRd by he device SWD\ SensorsAndLocationEnum------LPSensorSWDevice.
  

  What should I do?
  Thank you

  Hello

  It seems that the driver / service WudfRd causes the system crash.
  After Googling around it seems that other people have had similar problems of system.

  The WUDFRd is a service and it is called 'Windows Driver Foundation - User-mode Driver Framework' which is also responsible for USB devices

  I recommend you to disconnect all devices that you had connected to the laptop s USB ports. You should also uninstall all USB hubs that appear in Device Manager, then restart the laptop.

  You should also go in .msc services and search for Windows Driver Foundation - User - mode Driver Framework. Check the status of this service. It should usually be set to manual.
  Under 'Status', it could be set to off.
  If you pluggin installed a USB, status go to "started."

  Try to change the startup type to "automatic". Then shut down the laptop and restart. Then check the status again to see if it is still set to automatic.

  I recommend you to test and control the features of the laptop without connecting all USB devices. Then plugged a USB device again and check if an error pops up or system would break.

• Random reboots and crashes with WUDFRd failed to load of the device

  I get random reboots and falls down and receive check the event viewer I see this -.

  event 219, kernel-PnP

  The driver failed to load unit WpdBusEnumRoot\UMB\2 \Driver\WUDFRd & 37c186b & 0 & STORAGE #VOLUME # _____? _USBSTOR #DISK & VEN_USB2. 0 & PROD_CARDREADER_CF & REV_0100 #606569746801 & 0 #.

  well if anyone knows what it is?

  Your problem is unlikely to be associated with the event ID: 219, which warns a driver did not load. In fact the driver load a few moments later and the portable device then works.

  Please provide a copy of your system information file. Type the system information in the search box above the Start button and press the ENTER key (alternative is select Start, all programs, accessories, System Tools, system information). Select file, Export and give the file a name noting where it is located. Not to place the cursor in the body of the report before exporting the file. The system creates a new information file system each time system information is available. You must allow a minute or two before the file is completely filled before exporting a copy. Please download the file to your OneDrive, to share with everyone and post a link here. Normal mode preferred report. Please say if the report was obtained in safe mode.

  Please download and share with everyone copies of your System log and journal of the Application (two files) of your event to your OneDrive Viewer and post a link here.

  To access the system, log, select Start, Control Panel, administrative tools, Event Viewer, in the list on the left of the window, expand Windows logs and select System. Place the cursor on the system, select the Action in the Menu and record all events like (the evtx default file type) and give a name to the file. Do the same for the application log. Do not offer not filtered files. Do not place the cursor in the list of reports before selecting the Action from the menu. Do not clear the logs so that you have a persistent problem.

  For assistance OneDrive see paragraph 9.3:
  http://www.gerryscomputertips.co.UK/MicrosoftCommunity1.htm

  General remarks on event viewer
  http://www.gerryscomputertips.co.UK/syserrors5.htm

• Failed to load driver

  Whenever restarting my computer, I get a message that:

  The driver failed to load unit WpdBusEnumRoot\UMB\2 \Driver\WUDFRd & 37c186b & 0 & STORAGE #VOLUME # _____? _USBSTOR #DISK & VEN_GENERIC & PROD_STORAGE_DEVICE & REV_0. 00 #00000000000006 & 0 #.

  The machine still works, but I have no idea of what is causing this device or what to do about it.  Can someone advise?

  THE FIXED!

  I went Googling little more and found that someone else had the same problem.
  The solution was very simple:

  services.msc
  Windows Driver Foundation - User-mode Driver Framework
  Change the startup type to "Manual" to "automatic".

  Connect and disconnect USB devices and restart with or without them - no problem.
  Why he was put on "Manual", I don't know.

• HP Elitebook 9470 m wireless connection problems

  Hey guys

  From time to time my driver wireless Intel Centrino Advanced - n 6235 got disabled. I had to re-activate manually.

  The Error Message I received:

  "The driver failed to load for the device ACPI\HPQ6000\3 & 33fd14ca & 0 \Driver\WUDFRd."

  Source: Kernel-PnP ID: 219

  What I did was download the new driver directly from intel (HP has an older one on the site of drivers)
  http://www.Intel.com/p/en_US/support/detect/wireless

  Version: wireless_16.1.5_e64.exe

  No everything works fine! :-)

• Pavilion dv7-6190sl: Windows pro 8.1 on pavilion dv-6190sl

  I have some problems when you start windows 8.1 pro,.

  Before the paper in the window, it stops and then return to normal.

  In the registry of activity I have this warning:

  Impossibile caricare he pilot \Driver\WUDFRd by he USB\VID_138A & PID_0018\6eea666450e2 device.

  What is the cause of my problem?

  (Sorry for my bad Inglish)

  I find out what is the cause of this truoble: is avast free antivirus. I have uninstall and the problem is gone.
  Thank you very much for your support.

• Acer Aspire R7: Touchscreen suddenly stopped working

  Hey everybody,

  I have an Aspire R7 (running 64-bit Windows 8). Yesterday morning my touchscreen suddenly stopped working.

  After each start, I see an error in the event log stating something like "Driver\WUDFRd could not load the driver for the device HID\VID_0483 & PID_91D1 & Col01\7 & 1b0945e0 & 0 & 0000.

  In Device Manager there is no device showing an error or something. In the category "Monitor" it is only a PnP monitor listed - shouldn't the TouchInput unit shown here? Edit: I also looked through the HID devices: the appliance with the ID hardware event log message is not there, too.

  I tried reinstalling the drivers HID-monitor using Acer Recovery Manager, but nothing else happens after showing some information like 'installation'. Also, there is no change in Device Manager.

  I also removed the "PnP Monitor' of Device Manager and began a 'search for new hardware", but that doesn't lead to the "PnP Monitor' be reinstalled.

  I also perform a factory reset, but that did not help, as well.

  I would really appreciate help from anyone. I'm at work now, so I wouldn't be able to test stuff until about 17:00 (MEST).

  Kind regards

  Jan

  I found the reason of my touch screen doesn't respond do not: if I position the screen in a very precise angle - 'almost' tablet mode - the screen reacts to the keys and of the previously disabled HID devices becomes active. I had sent in my laptop for repair after a default display - apparently in some sort the touch sensor was not back in place correctly when the screen has been replaced

  Seems that now I have to send my laptop in another repair (making three repairs for this laptop - the default mentioned display occurred after the motherboard has been replaced by the same Acer repair center)

• XPS 15 9550 - BSOD freezes every day and randomly

  Hello

  Since I got my laptop I've been tormented by blue screen freezes often and seemingly randomly. It doesn't matter what I do. It happens several times a day. I used to get kernel inpage errors, and Ive tried to update all the drivers and some of the solutions I found online. Finally reduced that it freezes almost every day and especially the autocorrelation event is

  CRITICS OF THE PROCESS IS DEAD

  Event ID of the core-PnP 219
  The driver failed to load the ACPI\INT3400\2 device \Driver\WUDFRd & daba3ff & 1. -> what is it exactly? and why?

  So far, my research shows that the driver so that the error is a collaboration Performance Control driver of Intel processor. There is no driver for windows 10 9550 available for this purpose. Any suggestions?

  Can someone please help? is this a hardware problem?

  I've updated again BIOS 01.02, the latest Dell drivers for everything.

  Hello

  I solved my problem with the driver for Samsung SSD installation:

  

  Beniamin

• Computer crashing while playing dota 2.

  The computer hangs at random while game dota 2, I checked the event logs and found this.

  It is said in Pnp kernel warnings

  The driver failed to load unit WpdBusEnumRoot\UMB\2 \Driver\WUDFRd & 37c186b & 0 & STORAGE #VOLUME # _____? _USBSTOR #DISK & VEN_GENERIC - & PROD_COMPACT_FLASH & REV_1. 00 #20060413092100000 & 0 #.

  And in criticism he said kernal is the reason why its crashing.

  Answer if I missed something that I need to post.

  WA

  These related errors physical disk.  I would go to the preparer of HD, download & run their utility disk for verification.  I would also like to run a file system check to verify the State of the operating system

  Please run a check of system files (SFC) & DISM if you're on win 8 or higher 

  
  

  All instructions are in our Wiki article below...
  If you have any questions please ask us for .

  Check the file system (CFS) Scan and repair system files

  

• Event ID 219 - KernelPnp

  Hello

  I've read the threads that say to ignore this mistake if everything works well. However, this error occurs in the event viewer whenever I turn on my computer, and occasionally during the day when it is turned on.

  Here's what he said:

  The driver failed to load unit WpdBusEnumRoot\UMB\2 \Driver\WUDFRd & 37c186b & 0 & STORAGE #VOLUME # _____? _USBSTOR #DISK & VEN_MULTIPLE & PROD_CARD__READER & REV_1. 00 #058F63666433 & 0 #.

  Thank you.

  Click on the Start button and select Control Panel, administrative tools, Services. Find Windows Driver Foundation - User - mode Driver Framework in the list. Check that he started and that the startup type is automatic. If it is not set to automatic, right-click and select Properties, general tab. There is a box after the startup type. The options are available in a menu drop-down by clicking on the down arrow to the right of the box. Make the change and click apply and then click OK. Restart the computer and verify if it has started.

  Please check the system log of event viewer 20 minutes after restarting the computer to see if there is an error event ID 219.

• Windows 7 freezes, sometimes shows bluescreen and shows different errors

  Over the last 2 or 3 weeks, I had intermittent problems with my pc. Packard Bell iXtreme 6620 UK.

  I got a pc of HRT for a few months.
  When I acquired, I added an extra hard drive and I replaced the wifi card
  with a USB ports.
  Since then, the only change is a new graphics driver.
  No hardware or software changes for at least 3 months.

  Problem just started occurring a couple of weeks.

  Most of time, I have no problems running Win7, but sometimes the
  PC won't start, just beeps and restarts. This is it 2 or 3 times,
  and it can offer repair system. If I don't, then try to
  restart normally, and then usually it starts ok. If I accept it then
  says it is the repair, then try to reboot. I usually then power
  downwards.

  Sometimes during the restart cycle where I put upward, then after a
  shortly, I get a continuous beep of high slope and nothing else happens.
  I've then power off, and if I leave for about 10 minutes, then it usually
  restarts ok.

  Sometimes when I walk to get the Packard Bell splash screen, then the
  PC crashes, nothing else is happening.

  Sometimes I get to the Windows startup screen that says only: departure
  Windows and once again it hangs and nothing else happens.

  Sometimes when you run then the pc freezes. In this case, I usually for
  turn the power off and tell it to start normally when I turn on again. Generally
  in this case I do not get the above mentioned beep.

  Sometimes when it's cold, I get a BSOD indicating usually
  INTERRUPT_EXCEPTION_NOT_HANDLED.
  Stop: 0x0000003D
  (0xFFFFF880009CB1B0, 0 x 0000000000000000, 0xFFFFF880016FB50)

  Today, I also received the message
  ataport.sys
  Address FFFFF880016FBB5DA1FFFFF8800...

  I just got a message that the pc has been a mistake.
  Signature of the problem:
  Problem event name: BlueScreen
  OS version: 6.1.7601.2.1.0.256.48
  Locale ID: 2057

  More information about the problem:
  BCCode: 3B
  BCP1: 00000000C 0000005
  BCP2: FFFFF800032839E3
  BCP3: FFFFF88006CC0070
  BCP4: 0000000000000000
  OS version: 6_1_7601
  Service Pack: 1_0
  Product: 256_1

  Files helping to describe the problem:
  C:\Windows\Minidump\080614-21637-01.dmp
  c:\systemp\WER-52681-0.SysData.XML

  This occurred after the pc rebooted while I had an open file.

  Asked me if I wanted Windows to seek a solution. I answered Yes
  and after one or two seconds, the dialog box has disappeared without a message.
  I ran Memtest who reported everything is OK. From others
  suggestions that I found that I also ran TDSSkiller from Kaspersky.
  This also gave a certificate of good health.
  I had these problems again a few minutes, turned off and rebooted
  and all is well.

  I got a pc of HRT for a few months.
  When I acquired, I added an extra hard drive and I replaced the wifi card
  with a USB ports.
  Since then, the only change is a new graphics driver.
  No hardware or software changes for at least 3 months.
  Problem just started occurring a couple of weeks.

  Windows - custom views - administrative events Event Viewer gives the
  Next:

  Error:
  Filter event with the query "SELECT * FROM __InstanceModificationEvent WITHIN 60 WHERE TargetInstance ISA 'Win32_Processor' AND TargetInstance.LoadPercentage > 99" could not be reactivated in namespace '//./root/CIMV2' because of error 0 x 80041003.» Events cannot be delivered through this filter until the problem is resolved.

  Caution:
  The driver failed to load unit WpdBusEnumRoot\UMB\2 \Driver\WUDFRd & 37c186b & 0 & STORAGE #VOLUME # _____? _USBSTOR #DISK & VEN_GENERIC & PROD_MINI_SD_READER & REV_1. 06 #7 & 29D2AFC & 0 & 058F63776378 & # 4.

  Error:
  The computer was restarted after a bugcheck.  The bugcheck was: 0x0000003b (0xfffff800032839e3, 0xfffff88006cc0070, 0x00000000c0000005, 0 x 0000000000000000). A dump was saved in the: C:\Windows\MEMORY. DMP. Report ID: 080614-21637-01.

  Error:
  Audit events have been abandoned by public transport.  0

  Criticism:
  The system has rebooted without judgment properly first. This error can be caused if the system unresponsive, crashed or unexpected power loss.

  directly after
  Error:
  System shutdown prior to 16:48:33 on? 06 /? 08 /? 2014 was not planned.

  And:
  Filter event with the query "SELECT * FROM __InstanceModificationEvent WITHIN 60 WHERE TargetInstance ISA 'Win32_Processor' AND TargetInstance.LoadPercentage > 99" could not be reactivated in namespace '//./root/CIMV2' because of error 0 x 80041003.» Events cannot be delivered through this filter until the problem is resolved.

  Hello

  Thanks for posting your question on the forum of the Microsoft community.

  I would like to know some information about the problem so that we can help you better.

  1. have you installed Windows 7 Professional before the show?
  2. What is the exact model of your computer number?

  I appreciate your efforts to resolve the issue. Thank you also to provide details on the issue.

  The problem may occur due to device driver damaged or problems with the hard drive.

  I would suggest trying the following methods and check if it helps.

  Method 1:
  Remove all external devices connected to the computer except the mouse and keyboard and check the issue.

  If this does not help, then use method 2.

  Method 2:
  As you tried to run the memory test that shows that the memory has no problem, it is possible that the hard drive has some bad sectors, then I suggest you run the disk check and see if it helps.
  Refer to this article:
  Check your hard drive to find errors in Windows 7
  http://support.Microsoft.com/kb/2641432

  Note: When running chkdsk on the drive hard if bad sectors are found on the disk hard when chkdsk attempts to repair this area if all available on which data can be lost.

  I hope this information helps.

  Please let us know if you need more help.

  Thank you

• Entries in the event viewer that pilot was able to load while the drivers are loaded

  I look in the event viewer and see numerious entries that said:

  The driver failed to load unit WpdBusEnumRoot\UMB\2 \Driver\WUDFRd & 37c186b & 0 & STORAGE #VOLUME # _____? _USBSTOR #DISK & VEN_GENERIC - & PROD_COMPACT_FLASH & REV_1. 00 #20060413092100000 & 0 #.

  I looked in Device Manager and all the drivers are OK.  No yellow exclamation point.

  I have a HP P6792UK computer

  I "solved" this problem by making the "Windows Driver Foundation - User - mode Driver Framework" (wudfsvc) to automatic.

• Computer is very slow and crashes off is not Windows 7 correctly.

  Yesterday, my computer froze to the point of pull me the plug on my laptop. After him have enabled again, I noticed that my computer became very slow. I tried to browse the web with Google Chrome and it takes forever just to get a loaded page. The Shockwave Flash plug accident frequently and whenever I try to browse a web page that uses Java, it hangs for a few minutes and continues to load slowly.

  Chrome is not the only program that runs slowly. All other programs seems to freeze/being slow. I have the MSI CX640 with: 4 GB of ram, Nvidia Geforce 520 M 1 GB, Intel Core i3 - 2310 M 2.1 GHz, Windows 7 Home Premium 64-bit.

  I had a look at the event logs and found a few warnings and errors:

  The driver failed to load the ACPI\ACPI0008\2 device \Driver\WUDFRd & daba3ff & 2.

  Log name: System

  Source: Kernel-PnP

  Level: WARNING
  Event ID: 219
  ___________________________________________________________________________________________________________
  Custom dynamic link libraries are loaded for each application. The system administrator should review the list of libraries to ensure that they are linked to trusted applications.
  Log name: System

  Source: Wininit

  Level: WARNING
  Event ID: 11
  ___________________________________________________________
  Windows Windows (5352): an application to write to the file "C:\ProgramData\Microsoft\Search\Data\Applications\Windows\Windows.edb" at offset 70025216 (0x00000000042c8000) to 32768 bytes (0 x 00008000) succeeded, but took an abnormally long time (91 seconds) is served by the operating system. In addition, 18 other requests to this file I/o also took an abnormally long time to be repaired since the last post regarding this issue has been sent 30 seconds ago. This problem is probably due to a defective material. For further assistance diagnosing the problem, contact your hardware vendor.
  Log name: Application
  Source: ESENT
  Level: WARNING
  Event ID: 510
  _____________________________________________________--
  Windows detected your registry file is still in use for other applications or services. The file will be unloaded now. Applications or services that keep your registry file may not work properly thereafter.

  DETAIL-

  Register User 8 handles is escaped from \Registry\User\S-1-5-21-1019584894-1960917297-2461571163-1001:

  Process of 2480 (\Device\HarddiskVolume3\Program files (x86)\Steam\Steam.exe) has opened \registry\user\s-1-5-21-1019584894-1960917297-2461571163-1001-cles

  Process of 2480 (\Device\HarddiskVolume3\Program files (x86)\Steam\Steam.exe) has opened \registry\user\s-1-5-21-1019584894-1960917297-2461571163-1001-cles

  2480 process (files \Device\HarddiskVolume3\Program (x86)\Steam\Steam.exe) has opened the \REGISTRY\USER\S-1-5-21-1019584894-1960917297-2461571163-1001\Software\Intel\Display\igfxcui\3D key

  2480 process (files \Device\HarddiskVolume3\Program (x86)\Steam\Steam.exe) has opened the \REGISTRY\USER\S-1-5-21-1019584894-1960917297-2461571163-1001\Software\Microsoft\Windows\CurrentVersion\Explorer\UserAssist\{CEBFF5CD-ACE2-4F4F-9178-9926F41749EA}\Count key

  2480 process (files \Device\HarddiskVolume3\Program (x86)\Steam\Steam.exe) has opened the \REGISTRY\USER\S-1-5-21-1019584894-1960917297-2461571163-1001\Software\Microsoft\Windows\CurrentVersion\Explorer key

  2480 process (files \Device\HarddiskVolume3\Program (x86)\Steam\Steam.exe) has opened the \REGISTRY\USER\S-1-5-21-1019584894-1960917297-2461571163-1001\Software\Microsoft\Windows NT\CurrentVersion key

  2480 process (files \Device\HarddiskVolume3\Program (x86)\Steam\Steam.exe) has opened the \REGISTRY\USER\S-1-5-21-1019584894-1960917297-2461571163-1001\Software\Microsoft\Windows\CurrentVersion\Explorer\FileExts key

  2480 process (files \Device\HarddiskVolume3\Program (x86)\Steam\Steam.exe) has opened the \REGISTRY\USER\S-1-5-21-1019584894-1960917297-2461571163-1001\Software\Microsoft\Windows\CurrentVersion\Explorer\UserAssist\{F4E57C4B-2036-45F0-A9AB-443BCFE33D9F}\Count key
  Log name: Application
  Source: User profile Service
  Event ID: 1530
  Level: WARNING
  It took me about an hour and a hlf to type this message as several programs open at the same time causes the constant freezing. CPU utilization remains low and less than 50% of the total RAM is used. I tried to use Timestamp (version MSI system recovery), but the previous backups have been deleted, and I tried to use the system recovery which has a windows installation, but fails in the process. I don't know if these event logs means nothing at all. I would like to help with this issue as it did my computer almost unusable.

  Hello Jleester,

  The warning of error IO error can be caused by a defective hardware:

  Windows Windows (5352): an application to write to the file "C:\ProgramData\Microsoft\Search\Data\Applications\Windows\Windows.edb" at offset 70025216 (0x00000000042c8000) to 32768 bytes (0 x 00008000) succeeded, but took an abnormally long time (91 seconds) is served by the operating system. In addition, 18 other requests to this file I/o also took an abnormally long time to be repaired since the last post regarding this issue has been sent 30 seconds ago. This problem is probably due to a defective hardware

  I would check with the manufacturer of your computer to see if there is diagnostic tests that can be run on your hardware.

  I also see that Steam.exe is not release handles to your user profile, then I would say you uninstall Steam and reinstall. Event id 1530 is just stating they were unloading the application, steam.exe. This type of errors can cause your user profile is damaged.

  Let us know if that helps.

  Marilyn