DualBOOT UCS

Similar Questions

• Satellite Pro L850-1NR - dualboot Win7 / Win8

  Hello world

  I use my L850 - 1NR Satellite Pro for the school. I go to a technical school for information technology, and we use windows 8. The problem is that * Windows 7 preinstalled * on my laptop and home, each PC works with Windows 7.

  When you buy a Satellite Pro L850 1NR, you get two * installation Windows 8 CD *, if I want to make one * dualboot Windows 7 and Windows 8 *. I know how to create a new volume on my hard drive, but when I run the first disc, the only option is to remove Windows 7 and install Windows 8.

  Is it possible to dualboot this and if it is possible, what should I do?  :|

  Hello

  Windows 7 is pre-installed on your laptop. 8 win was provided on DVD discs.

  In both cases; Win 7 and Win 8 is part of the image of Toshiba.
  Toshiba is a package containing all the drivers, tools and utilities.

  It s is not possible to keep the Win 7 on the HARD drive and install 8 additional to win using the recovery disk provided.
  Why? Because this isn't clean system Win 8, but as mentioned; his image.

  But in general, its possible to have a system dual boot (8 Win and Win 7). The start menu will be created that will allow you to choose between Win 7 and Win 8 OS.

  You will need to create simply new partition in Win 7 system.
  Then, you must start the MS Win 8 disk clean and could install the 8 Win on the new created partition.

• Ubuntu and winxp dualboot on thinkpad

  Hey

  I bought a brand new think pad t61 and now I want to run ubuntu and Windows XP to dualboot modus

  No matter how I arrange partitions? (first ubuntu and xp or vice versa?)

  Thank you for your message

  Here is a screenshot of the hard drive of my R61 according to GParted.

  I have a partition separate from the House with my Linux installation. Normally most people use only 1 partition for a linux installation. Here is the presentation:

  sda1 = restore partition

  sda2 = Windows Vista Preload

  sda3 = extended partition that encompasses all other partitions.

  sda6 = Linux Swap

  sda7 = install Linux

  sda8 = Linux Home

  sda9 = extra EXT3 partition for a third installation of Linux. (currently used for the storage of Linux only )

  sda5 = FAT32 partition readable and accessible storage in writing by Linux and Windows.

• S30 Config UCS

  We received a S30 and somewhere along the line someone apparently had the brilliant idea of raid SSD and a hard disk of 1 TB in a single volume on the blue ports.

  So in the boot order that one disc shows as "UCS: Intel Volume_0001" or something similar.

  In the Advanced Configuration of UCS, the first two ports show how Intel Volume_0001.

  I am assuming that they could not accomplish this in software because they have created the drives C and D, and a hidden partition on this volume.

  Question is how did do that, I don't see any RAID quick post to make changes. I turned on all the relevant BIOS including settings disable the quick start, but all messages that appear are too fast to read.

  CTRL + I or Ctrl + H seem to have no effect.

  Thank you

  Thank you, somehow they corrected, although they have to take it back to the warehouse. Since I don't know what was the exact solution I will mark this as the solution.

• Problem of dualboot with LIKE 6-1090eo, no hard drive found new windows

  Hello

  Im trying to make my Dualboot envy. Make a new partition for it. Everything was groovy. But now, I hit a wall: startup in windows install works fine, even copied files when started installing windows. But. When should I choose the destination for the installation, no drive must be found. I copied the drivers for the drive directly from windows for the installation media, install said no driver here, nono. This is the original hybrid drive came with the laptop. No systeminfo identifies the disc. Some say it's a record of intel, propably chipset's. Checked Bios, no probs there.

  Oh great, what to do now? Change the player?

  SE on moro.

  Hello:

  Please try this...

  Download the drivers from this link below (first or second file listed - 32 or 64 bit depending on the case).

  https://Downloadcenter.Intel.com/Detail_Desc.aspx?AGR=Y&ProdId=2101&DwnldID=23060&keyword=Intel+RAPI...

  Extract the files on a usb flash drive.

  With the flash player and the installation of W7 media connected to the computer, boot from the installation of W7 media.

  After selecting the install now option, select the training - Advanced menu, Options and select the option load a driver.

  You should now see the storage driver files listed.

  If you check the box, it only includes the compatible driver.

  Follow the prompts and should install W7.

• ProBook 650 G1: Dualboot UEFI: automatic startup of windows

  Hello

  I have a problem dualbooting 10 Windows and Linux (Ubuntu). I did another partition on my hard disk to install Ubuntu on. I successfully installed Ubuntu and normally, it restarts and show me the GRUB bootloader, but it didn't.

  It starts directly in windows.

  I did a dualboot on this laptop before but then I had my motherboard replaced and now it does this.

  I can boot into Ubuntu by pressing F9: boot the device options and selecting Ubuntu. Can I get the GRUB bootloader. But this isn't what I want. I want that he let him start directly in GRUB, not windows.

  I also want to know how I manage my EFI partition. It is dotted with old. EFI files that are no longer relevant.

  Years the last issue: I can't boot into windows recovery mode by pressing F11 in the start menu. It just freezes.

  Help would be greatly appreciated!

  -Ximici

  @ximici: the following link provides information that should help you with your dual boot problem: install UEFI - tips

  The issue of the recovery, the OEM recovery is based on the original partitioning scheme remain intact.  Given that you have modified, installing Ubuntu, that "broke" the recovery feature.

  IF you want a way to restore the Win10 in its current state, so I recommend using a tool third-party imaging/restoration known as Macrium Reflect.

  Macrium reflect (MR) provides a FREE version that can be used to image and restore partitions or drives together.

  What I recommend is the following:
  (1) download and install Macrium reflect (MR)
  (2) run M. and choose the option: "Create an image of the partition (s) required to backup and restore Windows" to write a full backup to an external drive or USB key
  (3) use the option to create a CD or a USB startup key

  NOW, you have the means to restore a full system that works for the external hard drive or USB key in a few minutes.

  Good luck

• Android and Windows 8 DualBoot - Acer W700P

  Hi folks, I'm David from South America and I have this great Tablet since last year, that's great, but I would like to install android and Android, so that I can dualboot windows 8.

  I tried to install the latest 'android - 4.2.2_r1 - ia2"use"Generic UEFI Installer", I followed the steps as shown in the quick start page, but I found problems between the path, the first was a message while trying to start mode EUFI saying that the:

  DiskName % has been blocked by the current security policy

  then I read somewhere that the implementation of a supervisor password would allow me to change the settings of the UEFI, within those parameters has been an option for select trust uefi files, browsing the UEFI USB created in the quickstar page and select all the files in a folder called efi EFI, I could then start the first screen of the installer , and then you try the manual installation option gives me an error and get stuck there...

  I know that some people were succesfull install Android from the page open source intel so please could you share the steps to follow to install Android and have dualboot with the large W700

  Please share your comments, because for sure, there are a lot of people willing to try the DualBoot - Android and windows 8

  Disable your security strategy uefi on yout start menu, assign an administrator password and disable the security check. DualBOOT android AI on w700 has been done successfully.

• DualBOOT WinXP and Win98

  I tried to do for about 2 weeks, market and trying to get Windows 98SE & Windows XP dualboot correctly. I had success but am still not satisfied. Here's what I tried.

  1st attempt:
  -Essentially have a base with 2 primary partitions drive - a (Win98) one FAT32 NTFS (Windows XP). First, I installed Windows 98 on C: (FAT32), then installed Windows XP later on D: (WinXP). It was all great job for awhile and after some time I suddenly wasn't able to boot in Windows 98. Something had changed during the installation of programs over several days, so I restarted from scratch once again.

  2nd attempt:
  -Basic disk I had on a set of primary partition of 500 MB to active for just Boot (C: FAT32), about 1/3 of a primary partition for Windows 98 (E: FAT32) and about 2/3 of a primary partition for Windows XP (NTFS D :). Of course, I installed on the disks appropriate using C to boot to XP system files and 98. Installed XP first on D: and 2nd Win98 on E: - then I could only start XP again and Windows 98 was not able boot upward as he wanted to BE D: drive because Win98 is unable to see NTFS partition and think that there was nothing there so my boot.ini file were conflicts with that.

  3rd ATTEMPT (successful):
  After frustration, pulling on my hair and such things, I said screw it. I did an active primary partition (2/3 c: FAT32) and a 2nd primary partition (1/3 d: FAT32). So I installed Windows XP on C: first and Win98 on D: - it's all good and dandy except... I want my XP in NTFS security!

  AN IDEA: So right now, I say to myself, screw the partitions, equip a 2nd hard drive (primary slave / primary master). Master on XP NTFS, slave on 98 FAT32 - both primary partitions and can be active (or not?). But now I wonder if even that will work as loads off C: the boot for WinXP/98, and Windows 98 is an atheist, when it comes to NTFS partitions - they simply do not exist.

  ANOTHER IDEA: Find a decent boot loader. I've heard a lot of GRUB, but I wonder if this is the way to go because it seems that GRUB is used mainly for Linux/Unix dualboots.

  Here's WHAT I WANT: I want a WinXP NTFS (for security reasons) and a Win98 FAT32 work. Usually my Windows XP is about 2/3 of the space system and Windows 98 is of about 1/3 the space system.

  For all partitions to dualboot I use a 60 GB so you do the math. I have a spare 40 GB I thought put in Windows 98 separate conflict still further, but for some reason any after my failures, that it doesn't seem like I'm going to avoid conflicts...

  WHY THE TROUBLE? : you can ask - I just want to be able to play old games on Windows 98 with DX8.1 and have a working system of XP for all newer games (which are still old...) - in other words to benostalgic.

  Other questions on the installation made me know.

  PS Wait I will post everything trying to launch BITLOCKER partition Win7 with Bootcamp on my Macbook Pro. This one will be even more interesting...

  Get Ranish Partition Manager and install sound code MBR bootmanager.

  Then, at the prompt "boot HD...", press 1 or 2 to select the boot partition.

  No need to make entries special boot.ini, as boot partitions quite separately from this way.

  Also works for Linux, install LILO/Grub in the boot sector of partition, NOT the MBR, and once again you just press the partition number to select.

  http://www.Ranish.com/part/

  "P.S. wait until I post about trying to run BITLOCKER on partition Win7 with Bootcamp on my Macbook Pro." This one will be even more interesting... »

  Don't call us... I don't know that forum Mac Help well. (Just don't tell them we said that!)

• I have a dualboot (VISTA & XP) in different partitions. I would like to delete the XP partition and stay with Vista.

  I have a dualboot (VISTA & XP) in different partitions. I would like to delete the XP partition and stay with Vista.

  What are the steps to do this?

  Apparently, you have already removed XP, depending on your other Thread.

  http://social.answers.Microsoft.com/forums/en-us/VistaInstall/thread/ed84bf59-1078-42f6-8294-d88cf4f7a9f5

  Answered in another Thread on how to fix the Vista operating system.

  Mick Murphy - Microsoft partner

• DualBOOT

  I recently dualbooted windows xp and windows 7 as a whole, my problem is when I reboot the system, it does not give me the option to choose which OS I want to run it comes automatically runs under windows xp, and I don't know how to make Windows 7. HELP PLEASE.

  Here is the Vista Forums.

  For any question on Windows 7:

  http://social.answers.Microsoft.com/forums/en-us/category/Windows7

  Link above is Windows 7 Forum for questions on Windows 7.

  Windows 7 questions should be directed to the it.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  XP forums:

  http://social.answers.Microsoft.com/forums/en-us/category/WindowsXP

  Link above is for XP Forums.

  There is a list of the different Forums XP to the link above to help you.

  You get the help you need there.

  See you soon

  Mick Murphy - Microsoft partner

• Ethernet and Wifi keep 'identification' network, dualboot Ubuntu works great

  So I have trouble with my internet connection.

  I noticed the things so far:

  -Windows will allow me to connect to the network, but he continues to identify and therefore no connectivity.

  -A dualboot Ubuntu has no problem, I really write this for Ubuntu.

  So I wanted to go to a previous restore point to see if it would help.

  -However, I can not open the 'system protection' tab in the 'system' application (that needs administrator rights). (The service has failed to demand launch or timely control)

  -J' found that I can't run anything that has no need for administrator rights. When I try to run it, the app of interest freezes.

  Also, one last thing, could be bound or completely independent:

  -PC will not turned off properly, it keeps saying: 'close '. (tried up to 20 minutes) So I had to reset the PC hard.

  Help would be greatly appreciated!

  Cordially Bart

  Hi Bart,.

  We are here to help.

  Well insulate your concern, we need to collect the following information:

  1. Did you do the changes on your device before this concern?
  2. You have connected your device to a different network?

  You can start your machine in Safe Mode with network and includes the network drivers and services that need to access the Internet. You can also use the System File Checker to repair system files missing or damaged that may help solve your problem.

  If you have exhausted the above options, you may perform a clean reinstall on your Windows 7 device and check if it works.

  Keep us informed.

• vFoglight with Cisco UCS

  Hello all,.
  We are looking for Cisco UCS for our ESX env. and I was wondering if someone was running vFoglight UCS and had problems.
  Or if someone of Quest/Vizioncore knows of any problem or future integration planned with UCS.

  Thank you
  Craig Dieck

  Craig, I know of many clients running the Cisco USC with VMware and they are very happy. There is no known issue with vFoglight perspective. VFoglight hardware monitoring currently able to extract any platform SNMP information. If you are looking for a vFoglgith to pull information from the physical ESX servers directly (not SNMP) you will need to ask for a discussion of the roadmap with your representative local of the quest.

  Inform the product manager for the platform you are using and what you want to be monitored and displayed...

• Impossible to reduce new volume allocated to install dualboot windows 10

  Original title: dual boot retractable ssd

  I ssd 256 GB installed windows 7 .i have now 108 GB of free space, but I can not shrink again volume allocated to install dualboot windows 10 telling me that you can reduce only 7 GB why?

  Most likely not moveable system files.

  https://TechNet.Microsoft.com/en-us/library/cc731894.aspx

  Excerpt from the URL link: additional considerations when you shrink a partition, the files not movable (for example, the file exchange or the shadow storage area) are not automatically relocated and you cannot decrease the space allocated beyond the point where the files not movable. If you must reduce the partition further, move the swap file to another disk, delete the stored shadow copy, reduce the volume and then replace the disk paging file.

• Visio icon - Logical UCS

  Hi all

  I am looking for logical UCS visio icon and can't seem to find them, such as 6100 fabric interconnect and 5108 chassis, like this

  

  I found this link, but there are the icons of only physical, not logical.

  http://www.Cisco.com/en/us/products/HW/prod_cat_visios.html

  I also found this link, the PMS 3015 has many logical icons, but I couldn't find the above.

  http://www.Cisco.com/Web/about/AC50/AC47/2.html

  Just a suggestion, have a single Web page for logical and physical icons and clear descriptions, add dates for update and consolidation for the logic of the product icons. This will help to find the icons much easier.

  Thank you

  Ming

  Hi Ming,

  Thank you very much for your patience while we looked in the files icon.  Here's an update.

  • We checked the files in the zip file and they are not empty, but the designs are very small and if the drawing opens at about 30% of zoom, it would be easy do not agree on the drawing.  Sorry for the inconvenience.
  • In any case we are downloading a new zip with versions expanded drawings for the 6100 (interconnection of fabric) and 5108 (server chassis) so that they are more visible on the page. Of course, you can resize in Visio to what size you need.
  • We contacted the owners of the areas of Visio files on the site of icons of network topology to http://www.cisco.com/web/about/ac50/ac47/2.html regarding:

  -Download Visio stencils for the 6100 and 5108.

  -Your comment to facilitate icons: have a single web page for logical and physical charms with clear descriptions, dates of update and groupings of products for logical icons.

  Linda

• UCS mini KVM connection failed or timeout

  Hello world:

  could you please help me solve the kvm cannot logint issure?   try several ways and never configure IP KVM, according to the following

  step "in the navigation pane, click the LAN tab, expand LAN > pools > root > IP Pools, and then select the Pool of IP ext-Mgmt.»

  error message is the file attachment.

  from: Xiachen

  Hello

  Which version are you running now?

  It may be worth the upgrade of all mini system UCS.

  Software can be downloaded from

  https://software.Cisco.com/download/release.html?mdfid=283853163&CATID=2... (2B) & relind = AVAILABLE = rellifecycle & reltype = last

  The MMIC software is the. B package

  Software for the server products blade UCS B-Series  UCS-k9-bundle-b - series.3.1.2 b .B .bin

  17 SEP-2016

  464.42 MB