Problem of dualboot with LIKE 6-1090eo, no hard drive found new windows

Similar Questions

• Problem with connection of the external hard drive.

  Hi, my laptop runs Vista Basic. Recently, when I plugged a disc external HARD to 3.5 inches on the PC, I can only read the files on the HARD drive for about 5 to 10 seconds before receiving an I/O device error message.

  I don't know if it is a hardware or software problem.

  What can I do to solve the problem?

  Thank you.

  Hello

  Please contact the Microsoft Community.

  I'll help you with the problem. Please answer these questions in order to get clarity-

  (1) what is the exact error message?

  (2) deal with a similar problem on another computer

  I'd like to have you go to Windows Update, download and install optional updates in the list.

  Note: The hard drive must be connected by.

  In addition, you can also view this article to check for errors on the hard drive-

  http://Windows.Microsoft.com/en-us/Windows-Vista/check-your-hard-disk-for-errors

  Note: It is possible that you may lose the data on the hard disk after performing the chkdsk command. Make sure that you back up the data before continuing.

  Know let us know how it works for you.

• Error message with (PX1394E - 3 50) external HARD drive

  I have a 500 GB external hard drive, Code: PX1394E - 3 50.

  I work perfectly until now that I have a bug in Windows XP that says "has exceeded the capacity of the hub port", although blue light turns on the hard drive and leave the mistake of putting the USB hard drive to the computer. I've tried different USB ports and well past, I tested these USB ports with other devices and whether they work, the USB ports are 2.0 and Windows XP SP3.

  HM, I recommend you to send the drive to an authorized service provider because it sounds like a hardware problem. Maybe the controller in the external hard drive has certain shortcomings.

  If you need to find an ASP then go here-> http://eu.computers.toshiba-europe.com/ and goto-> Support downloads &->-> repairs & maintenance of the Web site-> to find an authorized service provider

  Welcome them

• BSOD with Memory_Management error when connecting hard drive external

  I have an ASUS all-in-one about a year with Windows 8.  About a week ago, I got the BSOD with error Memory_Management and OS was never able to recover.  After trying several system restores with no luck, I unplugged my external hard drive, and the operating system booted up normal.  I checked the hard drive on another computer and it worked fine.  I tried another external hard drive on my ASUS and as soon as the operating system detected it, I got the BSOD again.  I tried other USB ports with the external hard drive and the same result.  I tried a USB stick in the USB ports and it worked fine.  Need help please I can save is no longer my files.

  It is a very strange problem if associated USB devices work, but the HARD drive is not. Have you checked for a firmware update for the manufacturer HARD drive + assured your USB drivers on the computer, it blocks are perfectly up-to-date on the site of the manufacturer (not Windows Update or Device Manager)?

  Kind regards

  Patrick

• Pavilion dv6600ev: I would like to replace the HARD drive and the RAM in my HP laptop. I want to check compatibility

  Hello guys. I would like to replace the HARD drive and the RAM in my HP laptop. I would check the compatibility. For the momemt, I have 2 x 512 MB of RAM and a 160 GB HARD drive. Does anyone know the type of RAM (DDR1 or DDR2 most) and the accepted maximum capacity. Also the SATA port is a SATA I? Besides, I'm going to change the operating system (preferably in Win 7) so is there a driver?

  You can install DDR2-800 modules and they are the most widely available at this point, but the memory will run at 667 mhz speed.

  If it's 'the Answer' please click on 'Accept as Solution' to help others find it.

• HDD problem IBM Thinkpad T42. I can't install NEW Hard Drive and NEW OEM Windows XP?

  Hi all

  When I turn on the notebook Windows XP starts up and everything is loaded. But after 5 or 10 minutes, the response is very slow. If I click on any window and try to open any folder, or open internet explore it takes about 1 or 2 minutes to respond. I tried several ways to scan disk and Defrag, but still that are of no use. I also tried 'Difficulty automatically File System Errors' and ' will search for and attempt recovery of bad sectors ", but this problem is still there. Even when I stop it takes too long to stop about 15 to 20 minutes.

  When I turn on again NEXT DAY Windows XP starts and everything loads quickly. After 5 or 10 minutes, the response is very slow. This problem occurs for a few days.

  I then used "IBM Rescue and Restore" to load fresh operating system. Still the problem does not get fixed.

  Can you get it someone please let me know if this is problem of hard disk or something else. I'm guessing it's related to the hard drive.

  If it is the drive hard problem how to save (clone) of this old hard drive AGAIN DISK (after buying) HARD.

  If I buy the NEW HARD DRIVE and CD/DVD of NEW OPERATING SYSTEM OEM VERSION it will work? Do existing mother board ALLOW to load a NEW VERSION of OS OEM?

  Thank you

  Contact the manufacturer of your computer, IBM and ask them to send a recovery disk/s XP set.

  Normally, they do this for a cost of $ small.

  Buy a new hard drive > Reinstall.

  XP forums:

  http://social.answers.Microsoft.com/forums/en-us/category/WindowsXP

  Link above is for XP Forums.

  There is a list of the different Forums XP to the link above to help you.

  You get the help you need there.

  Here is the Vista Forums.

  See you soon

  Mick Murphy - Microsoft partner

• Due to a hardware problem, I had my logic board and replaced hard drive. How can I do to reactivate older versions of adobe products? (Acrobat, Illustrator and Photoshop)

  Due to a hardware problem, I had my logic board and replaced hard drive. How can I do to reactivate older versions of adobe products? (Acrobat, Illustrator and Photoshop)

  Old version download apps:

  CS 6:

  https://helpx.Adobe.com/x-productkb/policy-pricing/CS6-product-downloads.html

  On the same page, you will have the possibility to download other versions.

  

• I have a macbook pro with only 128 GB of hard drive. I installed lightroom and all my photos on an external hard drive. Can I keep my library on the external hard drive also lightroom?

  I have a macbook pro with only 128 GB of hard drive. I installed lightroom and all my photos on an external hard drive. Can I keep my library on the external hard drive also lightroom?

  Yes. Find LR catalog file in Edit/settings/general catalogue. Close LR and go to this place. The catalog file is one that ends by .lrcat - move it where you want. Beside the .lrcat file is a subfolder called Previews.lrdata. You can move, but if you don't not LR will generate new insights. Double-click the .lrcat file in her new home and LR will open with this catalogue. Set preferences in more recent catalogue.

• Satellite P300D - problem with reboot after update the HARD drive

  Hello

  I have laptop Satellite P300D - 12 c and recently, I put a new hard drive, the Seagate momentus 7200 RPM 2.5 "500 GB. It works well, but I have a strange problem; normally when I reboot the laptop when it will close something sounds, in the figurative sense I could say "something moves" for a bit in the DVD - ROM drive and shuts down and then restarts.

  Now, when the reboot happens to the part of the dvd - rom drive, I described above it stucks there... "something is happening" on the dvd - rom drive as trying to permanently access a dvd or something and he does the same thing until I force it to shut down by pressing the appropriate button. It happens once in two attempts to restart.

  Does anyone have a solution or a tip or something? If you do not understand something to tell me,

  Thank you very much

  Hello!

  I agree with Akuma. Maybe the drive is loose and so you should try re-allocation of places there.
  Maybe it works

  And updated the BIOS, you can find the Toshiba site:
  http://EU.computers.Toshiba-Europe.com > support & downloads > download drivers

  Good luck and give us feedback! :)

• Satellite M30X: Problems with external USB 2.0 HARD drive

  Hello
  I have a Toshiba Satellite M30X. I bought recently a 200 GB external hard drive. It has its own power supply. If I connect with USB 2.0 on my laptop, it happens to disconnect and reconnect leads him. Sometimes it works, so I can put data on the disc. Then again, he diconnects and reconnects repeatedly. I've tried a different USB Port, but there is no difference. It's very strange, because I plugged the external hard drive to many other computers (Laptop and Tower) and it STILL works! It is that with my cell phone, it disconnects and reconnects all the time. As I said, not always. Sometimes it works for a half an hour or two and then the action begins again...

  If anyone can help?
  Oxford Lutz

  Hello

  I put t know if this can help, but you can try to connect a USB hub with an external power supply. Then try to connect this external HARD disk to the USB hub.
  I know that it of not a exactly the solution but maybe it will help you to solve this problem of USB.

  Good bye

• The urge to Ultrabook 6 problem with recovery after failure of hard drive (out of warranty)

  Hello

  Please can someone tell me if it is true that to use HP factory recovery disks, hardware must be exactly the same as when purchased.

  After hours wasted trying to get the recovery disks to work, I find myself with the same "failed to retrieve @ screen and some unnecessary lines of code."

  In reading the various posts, it seems that I have a replacement for HP HARD drive of the same type that came with the computer. If this is the case, then the links on the support pages should say this before I have pay £39 for a set of disks.

  For me, a hard drive is a hard drive. I replaced a drive fried (1 month out of warranty expires) with a good brand replacement, but larger. Disks won't load.

  However, I could load W7 form an iso file and get that to work. I need the recovery because I do not know how to configure raid which allows the QuickStart on this laptop, and I don't have the time or no further inclination to make it work.

  Partly a rant, sorry, but I'm wrong, and is there a solution?

  Concerning

  I have seen others with this problem. Unfortunately, the only working solution, I remember the top was where a guy removed the player cache Msata, ran recovery then reinstalled.

  On a single charge of Win 7 I think you could install the Intel Quick Start software, then use it to activate the quick start. I have more a laptop Win 7 with Msata to test, but I remember the software could be opened from the icon beside the system clock and used to toggle the quick start.

• Problem with activation by using two hard drives (XP on one) and Win7 on the other

  I have XP sp3 installed on a hard drive and Win7 on another. I never use XP, I only keep there to keep my Win7 works great.

  I do not remember how did I installed win7, but I pretty sure I booted from a USB key and installed on a new hard drive.

  It seems that XP hard drive is in charge the boot settings, or something because I have set as the boot default HDD (in bios), and then select Windows 7 in boot menu that follows.

  If I select the hard disks Windows 7 the default boot hard drive, Windows restores activation. Select the hard drive with XP and win7 then choosing in the start menu, works very well, the activation is OK again.

  I'll install Win8 (that I already bought), but I still need to figure out what to do with this situation, because I need to replace the hard drive where XP is installed and install Win8 and have a double Win7 and boot 8.

  It is possible to solve the problem of activation, without having me call Microsoft? I use a utility called EasyBCD 2.2 and I was wondering if maybe this program could help fix me.

  Any thoughts?
  Wilfredo.

  Disconnect the drive xp, fix the win7 installation and activate if necessary

• Problem with the speed of the HARD drive on downgrated just on WinXP n/b Satellite A300

  After new lineup A300, it was decided to downgrade the system to Windows XP sp3.
  First of all, the AHCI mode was changed to COMPATIBILITY mode in the BIOS.
  After re-creating partitions on the HARD drive (Vista feature), XP sp3 has been installed.
  With all the drivers installation is normally, but first, I've noticed, it's very long loading of the system.
  In addition, regular copy of files of any source also went very for a long time.
  After reviewing the disk with "HDD-tune", I was shocked - maxspeed A300 HDD did not exceed 2.6 MB/sec (while on a desktop computer, this setting was more than 80 MB/s).

  My question. Is it normal? If it isn't (I think it isn't), what should I do? I ask your help or advice.

  > First of all, the AHCI mode was changed to COMPATIBILITY mode in the BIOS.
  I think it's the answer to your question.
  If you want to use the full speed of HARD drive and better performance, you must use AHCI mode.
  In this case, you can install Windows XP Home edition with the SATA driver.

  Check it please this page. You will find beautiful description how to find SATA drivers. At the end you can also find the link to the guide for "Slipstreamer SATA driver in the Windows XP boot cd using nLite".

  I hope this helps.
  Good luck!

• ITunes - problems with burning discs on external hard drive

  Hello

  I get error messages when I try to burn CDs on iTunes - corrects not allowed to perform. My iTunes media storage is related to an external hard drive - without preferences iTunes n. I changed permissions Read rights and write on iTunes via the Finder as suggested by a number of help pages - her has not resolved the problem. It is interesting when I change storage media iTunes to the default location on the hard drive - I can then burn discs. But as I hear it all accesed by iTunes data stored on external disk - this isn't a solution. Can anyone help?

  How externally is formatted? the last time that I answered this problem 2 days ago the person was externally formatted in NTFS and it must be Mac.

• Problems copying bookmarks from old Hard Drive to new hard drive

  The motherboard on my old Windows Vista 64 - bit is dead. The hard drive is still accessible. I bought a new PC with Windows 7 and installed Firefox. I find the.default file for Firefox on the old drive hard and copied and pasted in my new profile on my new hard drive. The old hard drive is connected to my new PC with an external hard drive enclosure. I tried looking for in my old profile user Firefox hard disk of old. I do this by clicking on my old username, go to Program Files (x 86) and only one program file that I found for DNA. Firefox has been installed on my old PC, so I'm surprised that I can't find what it listed under Program Files (x 86) on this drive. If I search the old drive for 'signet', it evokes my bookmarksbackup and other files of bookmarks '.json '. I tired bookmarksbackup copy for my new Firefox profile on the new hard drive and it seems to work, but the old bookmarks do not appear when I open Firefox. I looked at the links troubleshooting for the same problem that others have posted, but they seem irrelevant, because I can't find the sqlite or the directory where my old Firefox settings are stored on my old hard drive. Thanks in advance for any help you can provide.

  Firefox settings are not stored in program files, but they are stored under APPDATA.

  If you take the newer JSON file you have, open Firefox, press Control, Shift and B at the same time, then go to "Import and backup" then 'restore', then choose file, you can import it like this?