Dump original export information required

Similar Questions

• trying to export information from my phone to the pc, but it's prob givin

  OK nono help for export of blackberr info to pc

  Hello

  ·         What exactly happens when you try to export the phone info?

  ·         You get the error message?

  ·         You use any application when you export information from your phone?

  ·         What info are you trying to transfer from the phone to the computer?

  ·         Have you installed the BlackBerry Desktop Software?

  If you are trying to transfer pictures from phone to computer, you can check the link below:

  Import photos from your BlackBerry to your PC

  http://my.BlackBerry.com/tips/8172

  Also I suggest you to contact the Blackberry Support for assistance.

  http://us.BlackBerry.com/support/

• I am trying to export information from one site to the other; i.e. doba products to sell on ebay. I get an error telling me to "set associations"?

  I'm trying to export information from one site to another, i.e. the products to sell from doba to ebay.  I get an error telling me to "set associations"?

  Looks like a command prompt to set the default program for opening a certain type of file.

  This can be done in two contexts > Apps or right click on the Start button to open the Control Panel, choose the command display by: icons, then default programs.

• The boot configuration data file is missing some information required. File:\BCD error code: 0xc0000034.

  I just bought my ASUS laptop (with no dvd player) 3 days ago. Today I turned on for the first time and was usually up to 1 hour later this bluescreen poped out: RECOVERY, your PC needs to be repaired. The boot configuration data file is missing some information required. File:\BCD error code: 0xc0000034. You will need to use the tools for restore on your installation media. If you don't have any media of the instalation (such as a disc or USB device), contact your system administrator or the PC manufacturer... As I said before that my laptop came with Windows 8, and it is not a dvd player.

  Thank you.

  Remove the power supply and remove the battery

  Press and hold the power button for 60 seconds

  Apply the AC voltage ONLY (DO NOT INSTALL THE BATTERY)

  Click on the power button and more quickly, press F9

  Follow the instructions to reset the computer to factory default

• I am trying to reinstall adobe photoshop elements12 on my computer but I do not know my original account information. He continues by saying that the serial number is already in use!

  I am trying to reinstall elements adobe photoshop 12 on my computer but I do not know my original account information and he repeated to me that serial number is already used

  If you are able to log into the forums so you should be able to login to your account, unless you have created a new id just for forums.  If you do not have your account information, then it is likely that draw Support from Adobe will be ready/able to provide a service to disable.  If you ask them for more than what it looks like you might have, they might let you know that your product is no longer supported.

  To the link below, click on the still need help? the option in the blue box below and choose the option to chat...
  Make sure that you are logged on the Adobe site, having cookies enabled, clearing your cookie cache.  If it fails to connect, try to use another browser.

  Serial number and activation support (non - CC) chat
  https://helpx.Adobe.com/contact.html?step=PHSP-PHXS_downloading-installing-setting-up_lice nsing-activation_stillNeedHelp

• Original export - date wrong

  Hello

  I have a problem with the photos that I export Fotos.

  I synchronize my photos from my iPhone in iCloud. On my Mac I synchronize these photos to iCloud to Photos.

  Everything works fine so far.

  Now I want to export my photos of Photos on my HARD drive. I use 'Export Original' to get the right creation date. He was already working. For whatever reason, it is now export my photos with a creation date of Jan 16 23 now. Not matter if photos taken in 2014 or 2015. In Photos, the date is correct.

  I installed these versions:

  Photos: Version 1.3 (350.23.0)

  OSX: 10.11.3 (15 D 21)

  I've updated to 10.11.3 after that I noticed this problem. Is this a bug?

  Greetz

  tornade317

  Yes, it has been reported and appears to be the result of the original downloaded from iCloud library he drilled in a new file - info Photos are correct (in the EXIF/IPTC files in the pictures) and will be properly read by other photo programs - the file date is not related to Photos and is the result of new created files

  LN

• I lost all of my original hotmail information.

  I have had hotmail since I have my laptop. I am registered to several websites that I paid for and since last week, I can access is no longer my Email.  It was changed to Windows Live.  They asked a username and password that I did, and now I can not pull up of my hotmail emails original.  They have totally disappeared.  What can we do to find this information?

  Hi lilcougar,

  If you have provided an alternate email address when creating the Hotmail account you can log in with this email address and change the username and password from there by clicking on forgot password.

  Or, Alternatively, you must contact Windows Live support for assistance:

  http://windowslivehelp.com/product.aspx?ProductID=15

  Reference:

  Windows Live Hotmail Top issues and Support information

  http://support.Microsoft.com/kb/316659

  Hope the helps of information. Please post back and we do know.

  Concerning
  Joel S
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Export information of host data center

  Hello

  Someone has a PowerCLI can export the following information to CSV...

  DC CLUSTER, HOSTNAME, IP, MANUFACTURER, MODEL, CŒURS THE PROCESSOR, PROCESSOR, CPU SOCKETS, CŒURS BY SOCKET, MEMORY TYPE, NETWORK, SCHEDULE, VERSION BUILD ZONE MAPS

  This will be a good help.

  I modified the script to display the IP address of vMotion and the number of network cards. While searching for the IP address of vMotion, I also found a better way to find the IP address of management. So I changed that as well.

  Get-Datacenter |
  ForEach-Object {
    if ($_) {
      $Datacenter = $_
      $Datacenter |
      Get-VMHost |
      Select-Object -Property @{Name="Datacenter";Expression={$Datacenter.Name}},
      @{Name="Cluster";Expression={$_.Parent.Name}},
      @{Name="HostName";Expression={$_.Name}},
      @{Name="ManagementIP";Expression={
        ($_ | Get-VMHostNetworkAdapter |
          Where-Object {$_.GetType().Name -eq "HostVMKernelVirtualNicImpl" -and $_.ManagementTrafficEnabled}).IP
      }},
      @{Name="vMotionIP";Expression={
        ($_ | Get-VMHostNetworkAdapter |
          Where-Object {$_.GetType().Name -eq "HostVMKernelVirtualNicImpl" -and $_.VMotionEnabled}).IP
      }},
      Manufacturer,
      Model,
      NumCpu,
      ProcessorType,
      @{Name="CpuSockets";Expression={$_.ExtensionData.Hardware.CpuInfo.NumCpuPackages}},
      @{Name="CoresPerSocket";Expression={
        $_.ExtensionData.Hardware.CpuInfo.NumCpuCores/$_.ExtensionData.Hardware.CpuInfo.NumCpuPackages
      }},
      MemoryTotalGB,
      @{Name="NumNics";Expression={@($_.NetworkInfo.PhysicalNic).Count}},
      @{Name="TimeZone";Expression={$_.ExtensionData.Config.DateTimeInfo.TimeZone.Name}},
      Version,
      Build
    }
  } |
  Export-Csv -Path VMHostInfo.csv -NoTypeInformation -UseCulture 
  

• Export information raw audio?

  So you can do a video layer in After Effects to show the audio spectrum of an audio layer, what displays the magnitude of audio levels at the frequencies in a selected range. I was wondering if it is possible to get raw information used to create this video layer and export it, for example in a csv file.

  So to make it clear, the csv file contains values for energy and amplitude in each band of frequencies at different times.

  The only option you have is to convert audio to keyframes and then copy all the keyframes and paste it into a spreadsheet. Which would give you an amplitude only. As Mylenium suggested, AE has very little audio tools and there are much better apps for your project.

• Script to export information about LUNS - try to iron out the kinks

  I have a script which aims to export the details on the LUN information for the ESX hosts in a particular place. Here's the syntax:

  Report_LUN_Details_Location.ps1 where is introduced in the - position inside the script parameter. The script returns the content in c:\temp in the CSV format. Most of it works, but I have a problem with the path information access which to correctly report. Also, there are errors during execution of the script, but that does not affect the result. There also a few custom fields to communicate their data from EMC Symmetrix devices. Advice on how to improve/correct the script would be more appreciated.

  Thank you

  Ed

  The string error you see is the UUID to local disks is shorter than that of the SAN disks.

  Most of the time these local disks have the word "local" in the displayname property.

  If you can filter them by replacing it

       foreach ($Device in $VMHostObj.Config.StorageDevice.SCSILUN | Where-Object {$_.Vendor -ne "VMware"})
  

  by

       foreach ($Device in $VMHostObj.Config.StorageDevice.SCSILUN | Where-Object {$_.Vendor -ne "VMware" -and $_.DisplayName -notmatch "local"})
  

  The empty DevicePath property is due to disk devices.

  If I replaced this line

       foreach ($Device in $VMHostObj.Config.StorageDevice.SCSILUN | Where-Object {$_.Vendor -ne "VMware"})
  

  by this line

       foreach ($Device in $VMHostObj.Config.StorageDevice.SCSILUN | Where-Object {$_.Vendor -ne "VMware" -and $_.LunType -eq "disk"})
  

  This problem has disappeared.

  BTW, why do you test for vendor VMware?

  Is your set up running on a VMware Workstation perhaps?

  The complete script is attached.

  ____________

  Blog: LucD notes

  Twitter: lucd22

• can we use original export to import using datapump 10 g file?

  Hi all
  
  I'm trying to find an answer to a question. Lets say both my DB are on 10g. and on the basis of data original used A...i exp uitility to export the database/schema/table... so can I use the same export file (created by original exp uitility)... on the B database and import the file using impdp uitility or I can't?

  Hello

  No, not possible.

• HP Envy 15-U483: information required for HP Envy 15-u483 ultrabook x 360 Touchsmart

  Hello

  Recently I went through a HP product available in our region (HP Envy 15 - U483 Ultrabook x 360 Touchsmart), it seems good and perfect.

  I searched online for the product mentioned on local shops, but I need some information that i cannot explore stores staff and even I am unable to find it online on review of HP product for this specific model.

  Necessary information:

  1) made the model contains an Ethernet (RJ-45) Jack?

  2) although this model is supplied with default Windows 10 Home; But is it possible to change with Windows 10 Pro (to obtain more features network/domain)?

  Would be grateful for the guide and help.

  Kind regards.

  The specifications of the product are here-shows ethernet:

  http://support.HP.com/us-en/product/HP-envy-15-U400-x360-convertible-PC/8499298/model/9111911/document/c04866033/

  You should be able to upgrade to Pro by purchasing the license from Microsoft:

  https://support.Microsoft.com/en-us/help/12384/Windows-10-upgrading-home-to-Pro

• Equium M40X specification information required

  Hello
  I hope that there is someone on the forum who can help me.

  I have a satellite M40X Toxhiba.
  I spent several hours on the Toshiba site this morning trying to find the specifications of this model.
  Unfortunately my laptop broke down.

  I was told that the motherboard is cracked and I can access is no longer at the computer.
  I do not have a note card and none of my writings gives this information.
  It's a computer 15 "laptop with CD/DVD player, Intel Centrino, SRS Trusound, Microsoft XP.

  I need to know the size of the memory and RAM and anything else if you think relevant.
  Thank you very much. Issyb

  Hello

  There are many different models of Equium M40X.
  Numbers so much more would be needed to determine what components are installed.

  Usually, the model number should be placed at the bottom of the unit.
  Check this box and post it here!

• IMMEDIATELY THE INFORMATION REQUIRED FOR WINDOWS

  Hello.
  I use Windows 7 for a few years, but I always found appropriately slow in terms of log on, closing, opening programs,
  navigation on IE... (despite having the latest version of Adobe Flash Player, Shockwave player, Java, IE 10.etc). At each time before the PC
  all the cookies, the system files (unused) are to clean up using (...) Cleanser, but not so much more satisfying. I m in the mood for migration to Windows
  XP SP3. I know that Microsoft already has XP rest in peace on 08.04.2014, but this does not mean that the XP installation is now a crime.
  I want to just use XP SP3 intended Home (you already know what I mean!). I have no useful information on my PC that after connection Internet XP, pirates
  My Infos.Isnt't important it hack!
  And more I want to know what exactly is meant by "Microsoft ended Support for XP. For me Windows XP updates
  Secondary.It does not mean that the PC works without Update.I were equipped with WIndows 7 from 2010 with no updates.

  A recent survey showed that Windows XP SP3 boots 10 X faster than Windows7 & 8. also the navigation is faster.

  Any Expert must please suggest me the meaning of "support has ended. I myself m from India.We here have more than thousands of '
  Customized versions of Windows, but I don't install it unless all the advice of the Microsoft Community.

  This means putting a Windows XP on the Internet is a very good chance for hacking. "End of support" means that Microsoft will fix no longer issues with Windows XP.

• Information required to activate XP on a replacement drive

  I got a computer that has the original XP disc and the original XP registration code - straight. It was without a hard disk for safety reasons, I have to use a disc from another computer inside. I'll install XP on the drive by using the registration code, then turn it on. I think it should be OK because the motherboard CD and the registration code will be all the same. The only thing that concerns me is that during the activation process I will ask you questions to which I don't know the answer to-and personal data of the person who initially activated XP on this computer. I be asked everything?

  No personal data will be asked. However if the product key code has been used previously to activate Windows XP then you may need to activate by phone.

  How to activate Windows XP
  http://support.Microsoft.com/kb/307890/en-us

  If the activation of the Internet does not work, then see the section titled: "how to activate Windows XP by phone.
  Also, make sure that you do not confuse the product key numbers and letters
  (number 8 for the letter B, etc.)

  ===================================================================

  Blank page to activate Windows in the wizard of Windows Product Activation
  http://support.Microsoft.com/kb/314935

  How to contact a Microsoft Product Activation Center:
  http://support.Microsoft.com/default.aspx/KB/950929/en=us

  Microsoft Activation centers worldwide telephone numbers:
  http://www.Microsoft.com/licensing/existing-customers/activation-centers.aspx
  (This site is for activating Volume License, but if you call, they will help you)

  The phone number is not working:
  Microsoft Wordwide contacts: http://www.microsoft.com/worldwide/default.aspx

  Once Windows activated / Genuine Advantage Notifications:
  http://www.Microsoft.com/downloads/en/details.aspx?displaylang=en&FamilyID=afd45b36-3d77-4259-801c-d31a9a90cdcf
  (This tool will confirm that the copy of Windows installed on your PC is genuine and authorized)

  J W Stuart: http://www.pagestart.com