Duplex printing does not

Similar Questions

• OfficeJet Pro 8600 Plus duplex printing does not

  I am on Mac OSX leopard (10.5.8) and just purchased the officejet pro 8600.  Everything seems to work fine except that I can't understand how to print on both sides.  The option is not allowed in the layout

  

  I checked the settings of the printer and you don't see anything to indicate how to enable the duplex printing option.

  Thanks in advance for the help.

  Hello

  Please follow the steps below to configure the automatic duplex print driver:

  1. check that duplex printing accessory has been installed correctly. To check this open system preferences and go to Print & Fax. Open the print to your printer queue. Click Printer Setup and in the tab menu choose driver. Make sure that the box next to HP printing accessory (duplexer) sides.

  2. on the file menu, select print. The print window is displayed.
  NOTE: The print window might be minimized. Click the blue triangle next to the printer name to see all available parameters.

  3. in the print window expanded you will find next to Copies the checkbox for duplex. Select the check box.
  NOTE: If the check box does not appear in the specific application print dialog box, skip this step.

  4. to select the connection type click the selection box below, listed as the name of the program (e.g. TextEdit)
  Will appear as Copies & Pages within Microsoft Office applications.

  5. Select the menu drop down.

  6. set the duplex option as binding edge Long (Portrait) or binding Long Edge (landscape).

  You can save the settings for later use by clicking preset > save current settings as preset.

  Please let me know of any problems,

  Shlomi

• Oficejet Pro L7680 duplex printing does not work anymore

  I used duplex printing on my Oficejet Pro L7680 all-in-One because it was new, but for the last month it does not work.

  When you choose to print or copy double-sided, it then prints the first side of the sheet, rather than take this piece of paper in the duplex unit, it it spits and then displays a message that it is paper.

  I tried reseting the printer by pulling on the power cord and leave unplugged for more than an hour, but he still feels the same question. Yet once, this happens if I print from my computer or if I'm trying to copy copy double-sided, so I don't think it's a problem with the PC. But just to cover the basics, this printer is network installed a windows PC running Vista Home 32 bit, Vista 64-bit Edition and Windows 7 64-bit edition.

  Well, it's strange, it worked for 3 weeks and now it just started working again without doing me something for her. Very strange...

  But I guess anything that get the problem solved is a good thing...

• Manual duplex, duplex printing does not work on my HP Officejet g85 all-in - One Printer running Windows 7

  I have a new 64 bit Windows 7 Home Premium PC which I plugged my HP Officejet G85 printer via a USB cable.

  Tell the truth, the 'instructions' click on the 'FEATURES' tab on the active manual duplex duplexing aka.  My driver does not work

  have a "FEATURES" tab - so I can't print double-sided.  CAN YOU HELP ME?  It is not for lack of printing, since everything still works perfectly on my old XP computer.

  THE COMMANDS THAT I USE ARE:
  "FILE, PRINT, HP G85, preferences and get 'LAYOUT' & PAPER/QUALITY" tabs (but not "FEATURES" tab).

  Tab AVAILABLE the has a "print on both sides:" box of choice: a) return on long edges or Rtrn b)

  BUT EITHER IT HAPPENS ELSEWHERE NOTHING EXCEPT THE OUTPUT PRINTER ON ONE SIDE!  Help!

  XP drivers will not install in Windows 7 and XP mode, to higher than the Premium family edition.

  As far as I KNOW, even if you install the printer in XP mode, I don't think you can access the printer from Windows 7.

  The solutions are to use free Office or Open Office in XP mode, collect the files to print and then print out them which can result in the document formatting issues.

  HP is trying to tell you that you need to buy something for their current range.

• OfficeJet 4500 G510n-z: duplex printing does not

  It works with word, but not with PDF pages.  It prints and when I press the button to continue printing allowduplex printing - nothing. I used Dr. print and it says working properly, but it's not.

  Hello @cash2,

  This is a great place to visit for a community support and HP! I see that you have questions of duplex printing PDF documents. But you can duplex by using Microsoft Word. I wish I could help you.

  Please try the steps outlined in this document to see if it will help: Print PDF as an image.

  I have also provided a document for duplex printing: printing on both sides of the paper.

  If the issue is resolved, your welcome to show your appreciation by clicking on "Accept as Solution" and the "Thumbs Up". Let me know how make you out. Thank you.

• 2 wireless automatic duplex printing does not work.

  I can't Auto 2 wireless faces seem to work on my OfficeJet J6480.  It connects and I can easily print but 2 sides printing\g works that manually.  It is a Windows 7 Home Premium 64 bit laptop and a standard computer also has the same problem...  2 automatic duplex printing works very well with a wired computer in the same way (64-bit Windows 7 Home Premium).  A way to solve this problem?

  Hello

  What do you mean by not working that manually?

  You see an automatic option two sides available or not, no specific error message?

  Additionally, make sure that the duplexer is enabled as follows:

  Enter the control panel > devices and printers.
  Right-click the printer icon, and then click printer properties.
  Click the device settings tab.
  As installed in Duplex Automatic Two-Sided accessory and then click OK to save the change.

  Kind regards
  Shlomi

• HP Officejet J6480 All-in-onw automatic duplex printing does not work

  My HP Officejet J6480 automatically duplex in Windows Vista. This feature is absent from Windows 8.

  Y at - it a fix for this problem?

  Thank you

  Meantime2013

  Salvation Dragon-fur,

  I have uninstalled and installed the software of the printer for the fifth time and for the first time, I actually saw J6480 on the registration page. Settings of the printer turned on and the automatic was still missing.

  I also checked "HP Officejet J6400 series properties" and found an option that did not previously exist under device settings.

  Options installable unit duplex (for 2-Sided Printing) was put to uninstalled.  I changed this option to installed and finally I automatic two-sided printing.

  Thank you once more for spending your time to help me.

  Best regards

  Pending

• Manual duplex printing does not work for LaserJet 100 color MFP M175a

  Hello!

  Windows OS 8.1. Printer LaserJet 100 Color MFP M175a. 61.108.8.10073 driver version date 2011 Apr 13

  1. after the passage on the checkbox "Print on both sides (manually)" on the tab "Final" of the print properties dialog box and
  print, dialogue with the instruction how to turn paper appears. Then the printer should print the odd pages, stop for
  turn the paper, and then continue printing even pages on the back of sheets of paper. But my machine print
  all pages sequentually sequentially 1,2,3,... without breaks. What is TI - my bug error or possible in driver?

  2 functions of the DeviceCapabilities API of Windows with fwCapability = DC_DUPLEX for this printer returns 0 (duplexing
  impossible). This value for any other HP printers, even without duplex automatic, always equal to 1 unit.

  Hi @Up205,

  I see by your post that you are having problems manually double-sided printing. I can help you with this.

  The software for this model on the 8.1 for Windows is the Basic Solution software and the driver. This solution of basic software provides printing and scan feature only. You download and install the latest drivers?

  HP LaserJet Pro 100 color MFP M175nw drivers.

  Ensure that the bidirectional Support is enabled.

  Go to the type (menu tiles) in "devices and printers" screen, select settings, click on devices and printers, click with the right button on the printer, start left click on properties of the printer, on the Ports tab, put a check mark next to allow bidirectional support.

  You may have to restart the computer.

  If you need help, let me know.

  Good day!
  Thank you.

• Duplex printing does not work anymore

  I have a 8250 printer and a two-sided Q5582A unit.

  I'm working on XP.

  Sided printing worked for years, but after reinstalling the printer, it no longer works.

  It is said in the installation program manually.

  Do I need a special driver for this problem?

  Hello

  Make sure that the duplexer is correctly connected to the unit.

  In addition, go into printers and faxes.

  Right-click the printer icon and select Properties.

  Enter the device settings tab.

  Be sure the duplexer to Accessories like installed.

  Confirm the changes and try to print again.

• HP 2549: HP 2549 and Mac OS x: double-sided printing does not work

  Hello!

  I just installed this printer on my Macbook Air and I cannot print double-sided. I tried by USB / wireless (in the case where there is a difference between the two) but no luck.

  I followed the advice in this post: http://h30434.www3.hp.com/t5/Printer-All-in-One-Install-Setup/two-sided-printing-no-longer-availble-...

  but I did not tab "driver". I only have "Général", "Levels of power" and "utility." I tried to delete the printer and then add it with HP 2359 and AirPrint not but that does not change.

  When I print a pdf document, double-sided printed is greyed out and I cannot change.

  What should I do? I already reinstalled the drivers on the HP Web site, I selected all the things that I can install it, but that has not changed anything.

  Thank you.

  Hi @blablaalf,

  Welcome to the HP Forums!

  I see that two-sided printing does not work with your printer HP 2549 on Mac OS X 10.10. I'm happy to help with this problem!

  I assume that your printer is a HP Deskjet 2549, otherwise please reply with the exact type of printer you have. To find product/model number of your printer follow the instructions in this link. Find your model number of the HP product.

  Otherwise, if the type of printer you have. According to this guide, print on both sides of the paper (duplex printing). He said: this printer is not an automatic duplex unit integrated, you can always print on both sides of the page to manually reload paper in the paper after printing tray first to print on both sides of the paper.

  This is the reason why this option is grayed out.

  If you print on letterhead, pre-printed paper or paper with watermarks and pre-drilled holes, the printer prints first the front of the document. Load the paper with the top edge first and the side to be printed facing downwards.

• Hello printer does not appear in the list of IOS Printer Options

  I have a home network with a router of Time Capsule.

  I connected my Cannon MX920 wireless network.

  The printer worked very well for my MacBook Air, my iMac, my Windows laptop, 10, my iPad and my iPhone.

  There are no known pending software updates to devices.

  I connected my HP OfficeJet 6500 (E709a) for the MacBook Air via USB and it works very well.

  I installed on the portable Windows 10 Hello and I can print to the printer OfficeJet @ MacBook Air laptop Windows 10 and the iMac (and of course the MacBook Air) very well.

  In Safari / Bookmarks / Hello on the MacBook Air, ONLY the Cannon printer is listed.  The OfficeJet directly attached via the USB port does NOT appear.

  My QUESTION is how can I make the printer OfficeJet @ MacBook Air appears as option in the printer Options / recent printers of dialogue so I can print to it from my IOS devices?

  This seems to be a pretty simple configuration problem, and I don't see the need to spent $ 20 on the App Store to make it work.  I see some comments along the lines of this problem, but the solutions are quite difficult to follow and seem to depend on having the printer appear in Safari / Bookmarks / Bonjour list.

  I'll appreciate any solution (or explanation as to why it isn't a).

  Hello DevGuy,

  Thank you for reaching out to the Community Support from Apple. I know how useful it can be to have all your devices on the network with a central printer, and I'd like to help offer a glimpse into what could prevent your of you using to print to your HP 6500 iOS devices.

  In order to print from a device iOS, the printer must be connected to the same Wi - Fi network and supports the Air Print feature. After some research, it seems that the 6500 HP does not support this feature directly. You may be able to find a solution based on HP in the App Store app, but this printer does not have Air Print capacity based on support documentation, that I could find at HP.

  For more information about known printing of Air and a list of compatible printers, have look at this article: About AirPrint

  If you have any other questions, please help again. The entire community is here to help.
  -Best regards

• I downloaded the new software recently and now my Epsom printer does not work

  iMac late 2009. Processor 3.06 GHz

  Hi, I downloaded the new software recently and now my Epsom printer does not work and my Wi - Fi on the computer keeps dropping out.

  I spoke with Epsom and they recommended to remove the drivers and reinstall them. Now, I can not install the ad pilots Wi - Fi does not work correctly. The research on this forum I see there have been many problems with the new version of the software. Can someone help me?

  < re-titled by host >

  Try a reboot.

  Make a backup using Time Machine or a cloning program, to ensure that data files can be recovered. Two backups are better than one.

  Try to set up another admin user account to see if the same problem persists. If back to my Mac is enabled in system preferences, the guest account will not work. The intention is to see if it is specific to an account or a system wide problem. This account can be deleted later.

  Isolate a problem by using a different user account

  If the problem is still there, try to start safe mode using your usual account.  Disconnect all devices except those necessary for the test. Shut down the computer and then put it up after a 10 second wait. Immediately after hearing the startup chime, hold down the SHIFT key and continue to hold it until the gray Apple icon and a progress bar appear. Startup is considerably slower than normal. This will reset some caches, forces a check for directory and disables all start-up and connection, among other things. When you restart normally, the initial restart may be slower than normal. If the system is operating normally, there may be 3rd party applications that pose a problem. Try to delete/disable the third-party applications after a reboot using the UN-Installer. For each disable/remove, you need to restart if you do them all at once.

  Safe mode - on El Capitan

  Start Mode without failure-El Capitan.

• Installed at El Capitan and now HP printer does not work via the network

  Installed at El Capitan and now HP printer does not work via wireless network

  Open system preferences > printers and Scanners and select the print tab.

  Then the right or control click on the HP printer on the left then click: reset the printing system

• my printer does not work well

  MY PRINTER DOES NOT WORK WITH FIREFOX. WHAT DO I DO? THANK U

  https://support.Mozilla.org/en-us/KB/how-print-websites

• HP Envy printer 5540: printer does not recognize paper 8.5 x 11

  I removed the paper 8.5 x 11 and printed several photos 5 x 7. I removed the paper photograph 5 x 7 and reinstalled paper 8.5 x 11 in the main tray. Printer will not recognize paper 8.5 x 11. I removed the paper and slid back the paper guides and reinstalled the paper. No change in the problem. When I select "Copy" on the screen of the printer and go to settings, it displays "tray and main paper tray: 5 x 7" if I try to print from the computer and select 8.5 x 11 paper, the printer does not recognize that size paper and continues to display paper 5 x 7.»

  Hello

  Open and close the paper tray, here, it will show on the screen of the size of the paper.

  Click on modify and change paper size we Leter and the type of paper, such as plain paper, then check all difference.