Oficejet Pro L7680 duplex printing does not work anymore

Similar Questions

• Duplex printing does not work anymore

  I have a 8250 printer and a two-sided Q5582A unit.

  I'm working on XP.

  Sided printing worked for years, but after reinstalling the printer, it no longer works.

  It is said in the installation program manually.

  Do I need a special driver for this problem?

  Hello

  Make sure that the duplexer is correctly connected to the unit.

  In addition, go into printers and faxes.

  Right-click the printer icon and select Properties.

  Enter the device settings tab.

  Be sure the duplexer to Accessories like installed.

  Confirm the changes and try to print again.

• MS Office 2010 Pro and my printer does not work,

  I just installed MS Office 2010 Pro and my printer does not work, I tried to print a test page for the printer, but that prints either, ask if I want to troubleshoot the printer and when I click on Yes, I get a message that there is a problem of ActiveX.  The printer will not print not any application, but it worked before installing office.
  All the apps work except in order to print it.
  I am running WinXPPro w/sp3.

  Jim K.

  Hello

  1. What is the exact error message?
  2. don't you make changes on the computer before the show?
  3. What is the brand and model of the printer?
  4. this problem occurs with all files that contain the Active X objects or specific file?

  Method 1:
  Run the fix it and check.
  http://support.Microsoft.com/mats/printing_problems/en-us

  Method 2:
  Try the steps in the link and check.
  Printer in Windows problems
  http://Windows.Microsoft.com/en-us/Windows/help/printer-problems-in-Windows

  Method 3:
  

  This problem occurs if the security settings for the Local computer zone are configured to prevent the ActiveX content to run.

  Important: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base: http://windows.microsoft.com/en-US/windows-vista/Back-up-the-registry : how to back up and restore the registry in Windows

  a. Click Start and run, type regedit.exe, and then click OK.

  b. expand the following registry subkey:

  HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Internet Settings\Zones\0

  (c) in the right pane, right-click 1200 and then click on edit.

  d. in the value data box, type 0. Then, click OK.

  e. close the registry editor.

• Manual duplex, duplex printing does not work on my HP Officejet g85 all-in - One Printer running Windows 7

  I have a new 64 bit Windows 7 Home Premium PC which I plugged my HP Officejet G85 printer via a USB cable.

  Tell the truth, the 'instructions' click on the 'FEATURES' tab on the active manual duplex duplexing aka.  My driver does not work

  have a "FEATURES" tab - so I can't print double-sided.  CAN YOU HELP ME?  It is not for lack of printing, since everything still works perfectly on my old XP computer.

  THE COMMANDS THAT I USE ARE:
  "FILE, PRINT, HP G85, preferences and get 'LAYOUT' & PAPER/QUALITY" tabs (but not "FEATURES" tab).

  Tab AVAILABLE the has a "print on both sides:" box of choice: a) return on long edges or Rtrn b)

  BUT EITHER IT HAPPENS ELSEWHERE NOTHING EXCEPT THE OUTPUT PRINTER ON ONE SIDE!  Help!

  XP drivers will not install in Windows 7 and XP mode, to higher than the Premium family edition.

  As far as I KNOW, even if you install the printer in XP mode, I don't think you can access the printer from Windows 7.

  The solutions are to use free Office or Open Office in XP mode, collect the files to print and then print out them which can result in the document formatting issues.

  HP is trying to tell you that you need to buy something for their current range.

• 2 wireless automatic duplex printing does not work.

  I can't Auto 2 wireless faces seem to work on my OfficeJet J6480.  It connects and I can easily print but 2 sides printing\g works that manually.  It is a Windows 7 Home Premium 64 bit laptop and a standard computer also has the same problem...  2 automatic duplex printing works very well with a wired computer in the same way (64-bit Windows 7 Home Premium).  A way to solve this problem?

  Hello

  What do you mean by not working that manually?

  You see an automatic option two sides available or not, no specific error message?

  Additionally, make sure that the duplexer is enabled as follows:

  Enter the control panel > devices and printers.
  Right-click the printer icon, and then click printer properties.
  Click the device settings tab.
  As installed in Duplex Automatic Two-Sided accessory and then click OK to save the change.

  Kind regards
  Shlomi

• Manual duplex printing does not work for LaserJet 100 color MFP M175a

  Hello!

  Windows OS 8.1. Printer LaserJet 100 Color MFP M175a. 61.108.8.10073 driver version date 2011 Apr 13

  1. after the passage on the checkbox "Print on both sides (manually)" on the tab "Final" of the print properties dialog box and
  print, dialogue with the instruction how to turn paper appears. Then the printer should print the odd pages, stop for
  turn the paper, and then continue printing even pages on the back of sheets of paper. But my machine print
  all pages sequentually sequentially 1,2,3,... without breaks. What is TI - my bug error or possible in driver?

  2 functions of the DeviceCapabilities API of Windows with fwCapability = DC_DUPLEX for this printer returns 0 (duplexing
  impossible). This value for any other HP printers, even without duplex automatic, always equal to 1 unit.

  Hi @Up205,

  I see by your post that you are having problems manually double-sided printing. I can help you with this.

  The software for this model on the 8.1 for Windows is the Basic Solution software and the driver. This solution of basic software provides printing and scan feature only. You download and install the latest drivers?

  HP LaserJet Pro 100 color MFP M175nw drivers.

  Ensure that the bidirectional Support is enabled.

  Go to the type (menu tiles) in "devices and printers" screen, select settings, click on devices and printers, click with the right button on the printer, start left click on properties of the printer, on the Ports tab, put a check mark next to allow bidirectional support.

  You may have to restart the computer.

  If you need help, let me know.

  Good day!
  Thank you.

• HP Officejet J6480 All-in-onw automatic duplex printing does not work

  My HP Officejet J6480 automatically duplex in Windows Vista. This feature is absent from Windows 8.

  Y at - it a fix for this problem?

  Thank you

  Meantime2013

  Salvation Dragon-fur,

  I have uninstalled and installed the software of the printer for the fifth time and for the first time, I actually saw J6480 on the registration page. Settings of the printer turned on and the automatic was still missing.

  I also checked "HP Officejet J6400 series properties" and found an option that did not previously exist under device settings.

  Options installable unit duplex (for 2-Sided Printing) was put to uninstalled.  I changed this option to installed and finally I automatic two-sided printing.

  Thank you once more for spending your time to help me.

  Best regards

  Pending

• HP 2549: HP 2549 and Mac OS x: double-sided printing does not work

  Hello!

  I just installed this printer on my Macbook Air and I cannot print double-sided. I tried by USB / wireless (in the case where there is a difference between the two) but no luck.

  I followed the advice in this post: http://h30434.www3.hp.com/t5/Printer-All-in-One-Install-Setup/two-sided-printing-no-longer-availble-...

  but I did not tab "driver". I only have "Général", "Levels of power" and "utility." I tried to delete the printer and then add it with HP 2359 and AirPrint not but that does not change.

  When I print a pdf document, double-sided printed is greyed out and I cannot change.

  What should I do? I already reinstalled the drivers on the HP Web site, I selected all the things that I can install it, but that has not changed anything.

  Thank you.

  Hi @blablaalf,

  Welcome to the HP Forums!

  I see that two-sided printing does not work with your printer HP 2549 on Mac OS X 10.10. I'm happy to help with this problem!

  I assume that your printer is a HP Deskjet 2549, otherwise please reply with the exact type of printer you have. To find product/model number of your printer follow the instructions in this link. Find your model number of the HP product.

  Otherwise, if the type of printer you have. According to this guide, print on both sides of the paper (duplex printing). He said: this printer is not an automatic duplex unit integrated, you can always print on both sides of the page to manually reload paper in the paper after printing tray first to print on both sides of the paper.

  This is the reason why this option is grayed out.

  If you print on letterhead, pre-printed paper or paper with watermarks and pre-drilled holes, the printer prints first the front of the document. Load the paper with the top edge first and the side to be printed facing downwards.

• I downloaded the new software recently and now my Epsom printer does not work

  iMac late 2009. Processor 3.06 GHz

  Hi, I downloaded the new software recently and now my Epsom printer does not work and my Wi - Fi on the computer keeps dropping out.

  I spoke with Epsom and they recommended to remove the drivers and reinstall them. Now, I can not install the ad pilots Wi - Fi does not work correctly. The research on this forum I see there have been many problems with the new version of the software. Can someone help me?

  < re-titled by host >

  Try a reboot.

  Make a backup using Time Machine or a cloning program, to ensure that data files can be recovered. Two backups are better than one.

  Try to set up another admin user account to see if the same problem persists. If back to my Mac is enabled in system preferences, the guest account will not work. The intention is to see if it is specific to an account or a system wide problem. This account can be deleted later.

  Isolate a problem by using a different user account

  If the problem is still there, try to start safe mode using your usual account.  Disconnect all devices except those necessary for the test. Shut down the computer and then put it up after a 10 second wait. Immediately after hearing the startup chime, hold down the SHIFT key and continue to hold it until the gray Apple icon and a progress bar appear. Startup is considerably slower than normal. This will reset some caches, forces a check for directory and disables all start-up and connection, among other things. When you restart normally, the initial restart may be slower than normal. If the system is operating normally, there may be 3rd party applications that pose a problem. Try to delete/disable the third-party applications after a reboot using the UN-Installer. For each disable/remove, you need to restart if you do them all at once.

  Safe mode - on El Capitan

  Start Mode without failure-El Capitan.

• Installed at El Capitan and now HP printer does not work via the network

  Installed at El Capitan and now HP printer does not work via wireless network

  Open system preferences > printers and Scanners and select the print tab.

  Then the right or control click on the HP printer on the left then click: reset the printing system

• my printer does not work well

  MY PRINTER DOES NOT WORK WITH FIREFOX. WHAT DO I DO? THANK U

  https://support.Mozilla.org/en-us/KB/how-print-websites

• My printer does not work on Firefox?

  My printer does not work on Firefox? It works on explore?

  "My printer does not work on Firefox" gives no details on the problem. It is a good starting point:

  • http://KB.mozillazine.org/Problems_printing_web_pages

  If this answer solved your problem, please click 'Solved It' next to this response when connected to the forum.

  Not related to your question, but...

  You must update some plug-ins:

  • Plugin check: https://www-trunk.stage.mozilla.com/en-US/plugincheck/
  • Shockwave Flash (Adobe Flash or Flash): updated Flash in Firefox

• changed router photosmart b110 e-all-in-one printer does not work

  changed router photosmart b110 e-all-in-one printer does not work

  Hi aged60,

  I'm sorry to hear that you have linking problems with your Photosmart B110 printer.

  I've included a link to HP Wireless Printing Center Troubleshooting web page.  In the section entitled "your printer was working on the network before and now is not" there are clear instructions to follow when your router has been changed or updated.  If you follow the instructions you should be able to communicate with your printer.

  HP wireless printing Center - Troubleshooting

  http://www.HP.com/global/us/en/wireless/troubleshooting.html

• Canon MX700 printer does not work

  After the update of El Capitan on my iMac, my Canon MX700 printer does not work. UGH!

  Mine has stopped working on Yosemite.  You have an old Mac OS X installed you can test it on?  You can run the test page for the printer itself?  I get the right error messages try to run the printer, and I ended up Canon to accept to sell me a MX922 at a discount.

• Smart Web printing does not work in IE9

  Smart Web printing does not work in IE9...

  I tried option, uninstall web printing smart hp and reinstalled. now it works... also if you use a pop up blocker, then you have to give permission to allow access to this site. It will come up as a small secondary window and print as did former windows messages.