Dv6000 restore pc to factory software?

Similar Questions

• Restore everything to factory settings.

  I have a HP Pavilion 521N Home Edition Version 2002 with Service Pack 2 of Office I got from my grandmother. The computer is running extremely slow. I want to restore it to factory again. I do not have a disk. I noticed that she has been commissioning, if I hit F10 it gave me a chance to do what I'm trying to do. Is the right way to do it or there at - it another way?

  Thank you, Dan cotton

  No, you guessed it! Press F10 and enter the HP recovery process. Use the advanced settings and perform a full recovery destructive. Once the recovery process is finished (and be patient, a lot of programs will be installed after you get in Windows), uninstall the software obsolete/undesirable/trial. Upgrade to XP Service Pack 3 and make all Windows updates. Install current versions of common programs such as Adobe Reader, Java, Flash, Shockwave, etc. Install a good antivirus like NOD32 (commercial), Avast or Avira (the two of them have free versions) and enjoy your "new" computer MS - MVP - Elephant Boy computers - don't panic!

• After a restore to the factory settings, where personal files are?

  I recently had a problem on my laptop (gateway) that prevents Windows to boot the system.  I went through the automatic tests on splash screens.  Files were good, the disk check was good, went to a restore point, but still was not able to start.  I got a message that there was no specified "configuration change".  So I chose the option to restore factory settings.  I didn't need a disk to do - it took place without no boot disk required.  There was a message related to the restoration who said that my files could be stored on the hard drive partitioned part.  I couldn't get to my personal files anyway, so I decided to take the chance to do the restore and hope that Windows would save my stuff.  Well, Windows is running, but I can't find my files.  The page of my computer shows 2 hard drives, 'Local' and 'Recovery', but I don't know how to access recovery or if my files are still there.

  Is there a chance that my stuff is still in this machine, or I'm just the GROUND?

  Thanks in advance for any kind souls who can solve the riddle!

  Hello

  "Recovery" partition will be the software that was used to perform the recovery to factory settings.

  We should never touch except to make recovery disks, failure of hard disk for you to reinstall Vista on a new hard drive.

  Windows does not save your data when you perform a restore to the factory settings.

  Your recovery software factory settings is provided by the gateway.

  It is an Option in their software.

  It is the gateway to this topic information.

  "Restoration with automatic data backup.

  http://support.gateway.com/s/software/MICROSOF/Vista/7515418/7515418su532.shtml

  All files and existing files are copied to the C:\Backup folder on the hard drive and a new copy of Windows is installed.

  You will need to contact Gateway Support and ask them where to find your data saved their recovery process if the information above did not save where gateway said it would.

  http://support.gateway.com/us/en/support/default.aspx

  See you soon.

• Try restoring back to factory State

  I'm trying to restore my dell laptop xps m1530 condition factory computer I press f8 go to repair and then it asks me to log into the admin and it says. Your account has been disabled. Please consult the system administrator, but I only have one account and it is admin can any1 help I don't have the cd either

  It may be better to ask the expert Dell in the Dell forums:

  Dell Community
  http://en.community.Dell.com/content/DellCommunityFAQs.aspx

  Manually reinstall your Windows Vista Operating System http://supportapj.dell.com/support/topics/global.aspx/support/kcs/document?c=ap&l=en&s=gen&docid=DSN_339949&isLegacy=true

  Restore your Computer´s software to factory settings
  http://supportapj.Dell.com/support/topics/global.aspx/support/KCS/document?c=AP&l=en&s=Gen&docid=DSN_336966&isLegacy=true . for the benefits of others looking for answers, please mark as answer suggestion if it solves your problem.

• Unable to restore iPhone to factory settings

  When you try to restore the factory settings I should be in iTunes and when I try to restore it to factory settings it does not load

  Nevermind it finally loaded

• 1st generation ATV dead. Orange light but no screen and no resetting of distance.  I tried direct connection to Mac and iTunes open and he's not here.  Is it possible to restore to the factory without screen or remote work

  1st generation Apple TV is dead. Orange light but no screen and no resetting of distance. I tried direct connection to Mac and iTunes open and he's not here. Is it possible to restore to the factory without screen or remote workin

  I guess you tried maintained low men together for about 6 seconds - silver 1 ATV that will restart to the diagnostic partition but who would rely on the hard disk is functional and if it was ok that wouldn't work with the logic board failure.

  I guess you have not fed and attempted to restart.

  In case your AppleTV think it is paired with another remote try Menu and left arrow for 6 seconds - the light now intervenes when you press the buttons on the remote?

  Also, it could be in the video mode bad - try Menu and upward arrow together for 6 CES switch video modes, but implies that he actually started OK.

• Do I restore laptop to factory settings after the plague of virus?

  Invaded by virus quarantined files because they cannot be deleted. "System Restore" is not working now.
  Can I restore laptop to factory again?

  Of course you can do it. Please use recovery media delivered. On this way the unit will be to new factory settings. The installation is very simple.

  Good luck!

• Satellite L350D-213 - restoration of the factory without disks

  Hello

  I came to this page because the Web, so many people say you don't need a disk and many others say that you do! {Massive headaches} CONFUSED!

  After last week, ending up with the UKASH virus on my computer, a friend helped and explains to go into MSCONFIG in safe mode and disable all, then I could finally get into my normal settings and do a scan to wipe it. I ran ad-aware, but later removed that he had fallen behind EVERYTHING, including IE. Then, I saved all my stuff and deleted from my computer to make room. I then did some general research and followed the instructions. "speed up my performance" followed by a few scans/clean ups and Defrags.

  I don't remember what I did to remove panic and difficulty Ukash and performance thereafter, except that I know that some applications do not work, because of a name of a file I know I deleted as 'my speed' and some I do not know why they do not work.

  After spending TWO WEEKS on this issue, it is better, the UKASH went, my performance is faster BUT the strange problem of a file, and I'm done with him! I want to do a factory restore to put all rights that I can and have done wrong.

  My question is; Can I do a record of WITHOUT restore factory, I don't remember if I've ever had a recovery disk, but if I did, I don't have any him more as they have become lost or misplaced.

  What are my options?

  My biggest fear is I'm at half way through the restoration of the factory and it prompts for a disk and I don't have. I also drive HARD recovery on my laptop on drives C and D.

  (System Restore does not work for me either, I have no restore points or can I create one, so another reason why I need to do a restore of the fctory)

  Kind regards.

  In your situation you should not spend a lot of time speculating on what the people are saying. In the user s manuals document described clearly how it works with the recovery image installation, creating recovery image and what your options are.

  In my opinion the best solution for virus affected system is new and clean install of the OS. It's certainly more radical solution but, I think of easier and faster way to have own OS again. The first step is the backup of the data, if possible and recovery image installation (factory settings).

  Recovery image can be installed on two ways:
  1 as described on http://aps2.toshiba-tro.de/kb0/HTD1303440001R01.htm HARD drive recovery facility
  2 with recovery disk created recovery image installation

  I presume you didn't create this disk so that you can do now is to order on https://backupmedia.toshiba.eu/landing.aspx

  In any case, try it please with option 1 and send feedback.

• factory software recovery kits

  Have a HP Pavilion Center m8457cPC, produces Nbr KJ396AA #ABA, with a bad hard drive.  Help gettting factory software level for this make and model computer would be appreciated that so far my efforts have been in vain.

  Hello:

  HP doesn't seem to have a recovery disc for your model any longer, but you can always get a game from this provider no HP on the link below:

  http://www.computersurgeons.com/p-16070-recovery-kit-kz863av-for-HP-model-number-m8457c.aspx

• Cannot restore to the factory settings

  
  

  I have the Acer Aspire 7741z laptop. The computer has frequent problems, and I want to restore it defaults. I've already saved important files and had planned to do a full restore to the factory settings, but the eRecovery program does not work for me. It starts the process, says that it needs to restart, check I want to replace the data on the hard drive and restarts. The problem is, it just restarts. No recovery process, no reset factory default. Alt + F10 during boot process does nothing.

  I checked the partitions still exist, and I made no changes to the system since the purchase (about formats, etc.). Of course, I'm no longer under warranty period, it seems getting direct support from Acer is not going to happen.

  If anyone can help? I really want to restore this laptop to its default settings.

• can't pc vista, sleep-even after restoration and even factory re - configure.

  can't pc vista, sleep-even after restoration and even factory re - configure.

  Hi Barry,.

  Welcome to the Microsoft community!

  The computer will not sleep.

  To help you better, we need more information.

  What is brand and model computer?

  To work with the issue, I suggest you check out the site:

  How to troubleshoot performance problems with sleep, hibernation and resume in Windows Vista

  http://support.Microsoft.com/kb/950686

  Note: once you are done with the boot, follow step 3 in the article http://support.microsoft.com/kb/929135 to set your computer to normal startup.

  Note: If in case, you are connected via a connection wireless, and then when you start the System Configuration utility to perform the clean boot, click Startup and Services tab one time and check wireless see corresponding section are checked (enabled).

  Feel free to contact us for any question related to Windows .

• Im running widows vista if I wanted to restore the default factory system would need a floppy disk

  If I restore factory default I have to reload the drivers etc?

  Hello

  I suggest you to contact the manufacturer of the computer for the restoration of the factory.

• My computer was not restart and I did a restore of the factory system, and it would not load the new screen?

  My computer has been restarted not and I have to click the button 3 or 4 times just so he can work. I use it for school so I really need to work and so I did the system back restore to the factory settings and it did again when the screen would not load but now it works. I left it only after I did 8 hours? that is the problem or do I do it again? I mean restoration?

  Hello

  I suggest you to follow these steps and check if that helps:

  Method 1:
  Start the computer in safe mode and check if you can doot:
  http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode

  Method 2:
  Try to perform the verification and startup repair if it helps:
  http://Windows.Microsoft.com/en-us/Windows-Vista/startup-repair-frequently-asked-questions

  It will be useful.

• Impossible to restore it to factory reset

  I have a Hp Pavilion e9270t desktop which has worked flawlessly (2) years.

  While some send the system froze and a reboot showed a problem with the SMART test, hard drive problem.

  The unit would start in safe mode and all my files have been saved to external media, a regular start was not possible.

  I replaced the OEM Seagate 750 GB with a 1 to Seagate and everything worked properly except MS update services.

  I tried to restore to the factory, including dumping all programs and installed internal use restore, no solution and no Microsoft Update service.

  My update to indicate parameter automatically, when I try manually, I get an error "service connected or activated.

  I ordered the HP factory restore disks and received a set of disks, a package of recovery (4) and (2) drives additional.

  I understand records re - install would be to clean the hard disk, format and re-install if you plant.

  I read the instructions, installed according to the instructions and everything seemed to progress during the hours that a progress screen appears.

  I took a picture with a camera (I doubt I can download here), and I have a box of windows installation indicating successful completion of (1) copy of windows files (2) develop for windows files (3) features, (4) installation of updates.

  All operations (4) include green check marks except the last element, in "BOLD", "Finish Installation".

  There is another box that indicates an error with a red X indicating "Windows Setup could not configure Windows to run on a hardware on this computer".

  I tried to use the HP recovery definition twice, the same result (Nothing connected except keyboard & mouse, hands off during the restoration).

  Where should I go from here? Help! PLEASE, I BEG YOU!

  Thank you, Marty

  Found your problem in the link below, at the bottom of the page.

  http://support.HP.com/us-en/document/c01868346

  .

  

• l want to restore my labtop factory setings. Help

  I use Vista home premium.my labtop dosnt work normally, l want to restore my labtop factory setings. What I can?

  Vista Media recovery obtaining and/or using the Vista recovery on your computer Partition to factory settings .

  There is no Vista free download legal available.

  Contact your computer manufacturer and ask them to send a recovery disk/s Vista set.

  Normally, they do this for a cost of $ small.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  In addition, ask them if you have a recovery Partition on your computer/laptop to restore it to factory settings.

  See if a manual provided with the computer or go to the manufacturer's website, email or you can call for information on how to make a recovery.

  Normally, you have to press F10 or F11 at startup to start the recovery process...

  Another way I've seen on some models is press F8 and go to a list of startup options, and launch a recovery of standards of plant with it, by selecting the repair option.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  Also ask them if it is possible to do the recovery disk/s for the recovery Partition in case of a system Crash or hard drive failure.

  They will tell you how to do this.

  Every computer manufacturer has their own way of making recovery disk/s.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  Or borrow a good Microsoft Vista DVD (not Dell, HP, etc).
  A good Vista DVD contains all versions of Vista.
  The product key determines which version of Vista is installed.

  There are 2 disks of Vista: one for 32-bit operating system, and one for 64-bit operating system.

  If install a cleaning is required with a good DVD of Vista (not HP, Dell recovery disks):

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu

  http://support.Microsoft.com/default.aspx/KB/918884

  MS advice on the conduct of clean install.

  http://www.theeldergeekvista.com/vista_clean_installation.htm

  A tutorial on the use of a clean install

  http://www.winsupersite.com/showcase/winvista_install_03.asp

  Super Guide Windows Vista Installation

  After installation > go to the website of the manufacturer of your computer/notebook > drivers and downloads Section > key in your model number > get latest Vista drivers for it > download/install them.

  Save all data, because it will be lost during a clean installation.

  See you soon.

  Mick Murphy - Microsoft partner