Pavilion Elite 170f: SATA power connector

Similar Questions

• Adding second DVD - Rom SATA HP Pavilion with only 2 SATA power connectors.

  Try to add a second SATA DVD Rom but do not see more SATA power connectors?  I tried to discuss with Tech, desperate!  Don't understand.  The system came with a SATA hard drive and a SATA DVD/BlueRay so both SATA power connectors are used.  I do not see another SATA power connector in the system, but there are at least 2 connectors SATA DATA more on the system board.  You can even add the old style DVD of as the connectors on the system board do not exsist for the old style DVD ROM.  What they do a converter to SATA power adapter or am I missing something?  Strange.

  If there is not a spare SATA power connection, maybe sometjhing like this would help:

  http://www.satacables.com/HTML/Molex-to-SATA-power-15-pin-ADA.html

• HDD WD20EARS to HPE 112Y - power to SATA power connectors - only P4 Molex available?

  Hi all

  I bought a new drive HARD for Western Digital (WD20EARS) and when I went to install in my HPE 112y

  I saw that the harness for my existing WD10EADS had the usual black SATA power connector (labeled P9)

  plugged in,

  still on the same spot next to my main HARD drive did not exist another SATA Black Power Connector for my new HARD drive but a great white molex 4 driver female connector P4

  I searched through the bundle of cables, Power Supplies, but I have not found another available black SATA power connector.

  So very quickly what I thought would be a simple upgrade of HARD drive stopped me in my tracks.

  So, my questions are...

  (1) can I buy an adapter's cable to power the existing WD10EADS as well as my new HDD WD20EARS?

  (2) is there a short jumper cable that allows you to convert the white Molex P4?

  (3) should I just upgrade the existing LiteOn model of block of power SUPPLY PS-5301 - 08HA / power 300 WATT?

  If so, what is a good upgrade and did so for my HPE 112y? Necessary power, 400-500-700 watts

  I have a gateway FX541S with a power of 700FB1E Delta Electronics which has 3 SATA power connectors

  that align perfectly to each of its 3 HARD drive location... Very well!

  That's why I was surprised when I saw the problem I had with my RESUME, I was expecting the same thing.

  I never thought that I would have a cable problem, after that I got my new HARD drive.

  The HP Pavilion Elite 112y has two discs, Blu - Ray and DVD as well as a Radeon HD4350 Video card and now two HDD.

  Is 300 watts enough, even though both of my HARD drives WD Green drives are.

  Unlike my front door where security HARD drive in place with a lever and blade in the front or side according to the case law can be too LOL!

  My HPE 112y has a cage for two HARD disks that screw in place... I don't have the necessary screws.

  Where can I get these very short screws to ensure my WD HARD drive?

  I tried Lowes with no luck.

  Thanks in advance for any help.

  I went simple and fast 5 minutes HDD Upgrade which I have just done to my front door, a serious project with my RESUME.

  I still love my HP, but not too friendly!

  Bud

  Hi again,

  Update.

  I went to my local computer store and got an adapter 'Y' which connects Molex 4 male pins on the computers Molex 4-pin female connector, then to a 'Y' for two SATA power connectors.

  They were kind enough to give me a bag of screws for the installation of my HARD drive in the cage.

  HDD installed in the cage, connected new red SATA cable and power cable SATA and everything has been working well since!

  Thanks again,

  Bud

• Dv6500 laptop - no Standard disc HARD SATA/power connectors

  Hi - I decided to upgrade my 80 GB Western Digital Scorpio 2.5 inches with a Seagate Momentus 2.5 inch 250 GB. The Seagate as I thought, were the standard SATA power connectors. The connectors slide on, the same thing as what I saw on all SATA 3.5 Desktop drives. We WD Scorpio, the pins are divided and snap into the motherboard. So I don't think I can use the Seagate, what 2.5 inch disks have will work with the DV6500? I thought that SATA SATA.

  Duh! Answered my question on. Looked at training, I got out and noticed there is a converter of pins of connectors SATA slide standard split connectors that facilitate their insertion in Notepad. just removed the old WD drive converter and added to the new Seagate.

• HP pavilion elite hpe-035sc: power supply wattage

  Hello

  I have a hp pavilion elite hpe-035sc

  Product number: VS311AA

  I7 870 2.9/8 GB ram/500 GB

  power supply: 460w delta electronics dps-460 DB A (it has a connector 6 power pins)

  I recently added an asus gtx 550 ti and it worked

  I'm worried about the power supply, do you not think that it is enough

  checked the power supply and I found:

  max power: 460w

  power combined 12va + 12vb + 12vc equal to 385 W (it does average?)

  THX

  It should not be any problems with the installation at all. Just do yourself the favor of not not overclocking the card.

  Delta POWER supply has enough good specs for a mainstream card like the one you have installed.

• HP pavilion elite m9500y desktop: power HP pavilion elite m9500y

  Hello

  I have a HP pavilion elite m9500y.

  Here is the link for the specification.

  http://h20564.www2.HP.com/hpsc/doc/public/display?docid=c01616194

  Suddenlty, it starts with black screen.

  After the filming of the power, I can't hear any sound out of the computer.

  My keyboard does not work. So I can't access my pc.

  I checked the memory cards and replace the motherboard battery.

  Nothing happened.

  So, I guess that the power supply is the problem.

  I wonder what food I buy.

  It requres 350W psu.  I'm not sure that it is acceptable to replace with power supply higher than W, such as 450W or 500W.

  So, here are my questions.

  1. What is wrong with my computer?

  2. If the power supply is the problem, should I replace 350W psu or W higher for the future?

  3. If I want to up grade my pc in the future, what would be the best option?

  I look forward to hearing your advice.

  With the case open and observing the CPU fan and projector, try the suggested PSU convenience store.  What is going on? If you decide to replace the power supply, I would suggest the Corsair CX600W. The system will build only what suits him, and you will have POWER supply that is quieter and more effective.  If no upgrade (GPU) is already planned, the Corsair CX500 is for sale.

• Desktop Pavilion Elite 137c: SATA Interface for adding an SSD

  How will I know what SATA (1, 2 or 3) that supports my Pavilion Elite 137c. I want to add an SSD that says he uses a SATA-3 interface.

  You are the very welcome.

  I think it'll do the trick.

  I added a 330 Intel SSD SATA III in my HP Elitebook 6930p business book, which has the Mobile Intel 4 series chipset, also SATA II controllers, and subjectively, it makes a very nice improvement upon startup and access time.

  I subjectively, because I have not run before and after calibration of performance tests.

  The mechanical hard drive was a high-end drive for laptop Western Digital 7 200 rpm, not a reader laptop slow poke 5 400 rpm.   I had no problem saying that the high-performance SSD.

  If you put any credibility in the Windows experience index scores, the mechanical hard drive had the score 5.9 max, that you can get with a mechanical hard drive and SSD hostage up to 7.6.

• Charger for HP Pavilion Elite e9140f 9V power

  Hello

  I have a HP Pavilion Elite e9140f desktop computer. The power supply fan makes little noise. I would like to replace his power.

  What are the replacements recommended for this?

  Thank you!

  MKG

  The fan down, not more. It will pull the Cabinet and out the back.

  

• Desktop Pavilion 6710f: 5V 4pin power connector plug

  I am trying to upgrade my usb ports, I just want to know how do I know if I have a power connector 4 pins taken 5V can I use in this office? I know that I have available expansion slots, don't know about power connectors. Thank you.

  OK, now I understand.  The only way is to check.  A molex plug looks like this

  

• the power supply in a 8300 has a SATA power connector

  I bought a new sata 750 GB drive for my dimension 8300, but lost the power cable. The PSU comes with one, or do I have to buy another?

  
  

• HPE Pavilion Elite 110 t: power hpe 100 t

  Hey guys,.

  I am writing this question because I was unable to find the information I need out of the web.

  I'm looking to upgrade some parts on my HPE 110 t, including the map graphic, but discovered the OEM 350W power would prohibit any significant upgrade in that Department. So, could someone inform me on the specifications for a power supply work on my particular PC?

  Thank you.

  The power supply max recommended for this type of upgrade is 650W, and usually a Corsair 600CX is chosen.  The Corsair 600CX is an EXACT adjustment and all the cables you'll need.  The 650W is deeper in the case, next to the cables from the DVD player.

• Desktop PC HP Pavilion Elite HPE-410it - upgrade with the USB 3.0 card

  I want to add a 4xUSB3.0 to my pc card, using a PCI Express x 1 connector; the card has a molex connector 4 pins to the power supply.

  The problem is that on the cables coming out of the power supply unit I have not free connectors, except a connector 6-pin female designed for a graphics card.  I can't find any commercial cable to connect the female connector 6 pin mentioned the molex 4 pin of the card.

  Can you help me please?

  Hello

  You will need to tap into an existing SATA power connector, either go to an optical drive or a hard drive.

  This adapter should work.

• Pavilion Elite HPE-170f Deskto: Memory Upgrade

  I have the HP Pavilion Elite HPE-170f desktop.

  Motherboard: Pegatron IPMTB-TK (Truckee)

  Processor: Intel Core i7 CPU 920 @ 2.67 GHz, 2668 Mhz, 4 Lossnay, 8 logical processors

  Storage media: 6 x DDR3

  Memory type: Types DIMM PC3-8500 (DDR3-1066)

  I currently have 8 GB of memory.

  What is the maximum I can install?

  Operating system: win 10 Pro 64-bit

  Thank you

  John

  @jmwright1058

  Memory upgrade information

  • Architecture memory triple channel

  • Six DIMM DDR3 240-pin connectors

  • Supports types DIMM PC3-8500 (DDR3-1066)

  • Memory non - ECC, unbuffered

  • Supports DIMM DDR3 4 GB modules

  • Supports up to 24 GB on 64 bit computers

  • Supports up to 4 GB * on 32-bit computers

• Number of ports SATA on a Pavilion Elite 9250t

  How many hard drives SATA internal can be run in a Pavilion Elite 9250 t?

  I'm not worried about the power from one of the disks will be in the solid state. The machine has enough ports SATA internal to run 3 hard disks without disconnecting the optical drive?

  Brandon

  Brandon,

  Here are the specifications of the motherboard.  Look in the lower right corner; two sata ports are vertical and two sata ports are horizontal.

  Yes, you can run three hard drives.  You could install the third disc by using a 5.25 to 2.5 (3.5) support in the open optical Bay.

  These articles may be useful.

• Pavilion Elite 9120Y running Windows7 (64-bit) has frozen. BIOS does not detect not SATA.

  HP Pavilion Elite 9120Y (about 1 year and more) running Windows 7 (64 bit) froze in the middle of a task.  The fan used to rev up every once in a while for 1 year or more.

  I opened the box and looked for the capacitors blown on the video card, but the video card is OK.

  A few times I was able to go in Windows 7 safe mode, but the computer froze in safe mode.  After a while computer ceased to recognize the HARD drive.

  Diagnosis (memcheck) startup DVD worked for a day or two before that stopped working.  Now, I have a Fedora LiveSpin USB and it starts after I disconnect the DVD, CD and HARD drive (SATA all).  Even when the HARD drive is connected, and the Fedora boots, he becomes failure SATA COMMRESET.

  I have to power off / power on many times before the start screen appears (otherwise, it's only in black).

  I have reset the CMOS (change jumper setting and changed back to the original setting).

  In short, it looks like SATA features doesn't work anymore, or bad BIOS.

  How can I request the upgrade of BIOS (for the HP 9120y website) if it does not start Windows 7?

  Any other solution of workarounds, tips, troubleshooting pointers appreciated.

  Thank you.

  The phase I) prepare
  Make a note of the version of the BIOS installed on your computer.

  Phase II) prepare a bootable USB key.
  Visit http://www.biosflash.com/e/bios-boot-usb-stick.htm to find out how to prepare a key USB bootable BACK.

  Phase III) extract the ROM BIOS update the BIOS executable file.

  (1) download the HP provided executable update BIOS.
  (2) download 7zip from sourceforge.net.
  (3) install 7zip
  (4) run 7 - zip file manager, navigate to the provided HP the BIOS exe and extract in the content (by pressing the blue less icon).
  (5) locate the VL (number) (number). (number) (number) file to the USB stick and copy.
  (6) on the USB stick copy port or the VLnn.nn file and rename it HPBIOS.ROM.

  The phase IV) BIOS upgrade
  (1) switch off the PC, in need of updating
  (2) fix the USB
  (3) to start the PC, and you should see the c: BACK prompt.  No harm done so far.
  (4) issue the dir command to see the HPBIOS. ROM on the USB stick c: / > directory.
  (5) reboot the PC, but this simultaneously press the CTRL and the key HOME together when the PC starts.  Hold it for a minute.
  (6) you can release the keys after a certain time (when we know the PC fan is buzzing and do something)
  (7) you don't hear about 5 long beeps (which indicates the BIOS upgrade is complete).
  (8) restart the PC.

  Audit of phase V)
  Check to verify that the BIOS version number reflects the newly installed version.

  References:
  http://h30434.www3.HP.com/T5/other-desktop-PC-questions/BIOS-recovery-process-for-HP-systems-with-AMI-BIOS/m-p/360147/highlight/true#M9181