DV7-4273us wireless and other software problems.

Similar Questions

• Malware 'non-genuine windows' shows and other software (Acronis) not said that this is the evaluation version when it is the paid-up version.

  I've been running windows 7 64 bit with SP1 and all the updates that are known for 10 months without any problem.  Now, a 'non-genuine windows' malware appear and other software (Acronis) not said this is the evaluation version when it's the fully paid for version.  What should I do to solve this problem.  Rick Rickard

  You must read the user final license agreement and you will find that the OEM licenses have restrictions. You need to understand.

  If you want to move windows from one computer to another, you need a full commercial license.
  This same problem is again this morning on another computer where he runs a real operating system from microsoft, Windows 7 32 bit SP!, more than 4 months.  Today he says that my win 7 op sys is not authentic.  This computer has been customized built so I was the first to install a sys op on it.
  
  
  After a diagnostic for the analysis report.

• Just installed windows 7 on a hpp6130y that I bought in August came with free Windows 7 upgrade after installation I lost microsoft works and other software that has been pre loaded on pc.

  Just installed windows 7 on a hpp6130y that I bought in August came with free Windows 7 upgrade after installation I lost microsoft works and other software that has been pre loaded on pc.

  How your post is related to Windows Update (compared to the Windows upgrade)?

  Contact HP support.

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Can I restore my copies of Office and other software from a Windows XP Backup?

  I did a full backup of my system Windows XP, including MS Office and other software. I upgraded the system to Windows Vista. Can I restore the backup XP MS Office and other software on Vista?  I installed backup-restore of Windows NT on Vista and open the backup file, selected the folders I wanted to restore and begun to restore. The documents have been restored correctly but SW such as the Office was not. SW files have been restored, but they are not "installed" i.e. do not work, I think it's obvious, but I don't know how to install.

  Thank you.

  original title: restore backup XP on Vista

  In this case, you must reinstall the programs, as has already advised it.

  "If you did a clean install, it's different.

  Programs need to be reinstalled from the original media (CD, DVD, etc.). »

  You can not copy programs installed from another hard drive or a backup.

  The only way that works is if it was a picture of complete backup of XP from the operating system installed and you need to reinstall the full XP Image for the program to work again in this OS XP...

  See you soon.

• My ENVY 17-j092nr Notebook PC flicks or vibrates randomly on the log screen Windows and other software

  Im a pc user ENVY 17-j092nr Notebook PC (windows 8.1 with all the drivers) and the OS updates works very well, however sometimes im getting an annoying error that allows windows vibrates like crazy, the problem is a little weird to explain, it makes the BAR on explorer.exe folder flick and other executives 'content' of several software Firefox for example the top bar which is orange starts helpeless flick, or in vlc, it even move, and then the worst on the windows log screen, which makes my movies quick photo from the left to the centre several times per second, making it impossible to write any Password and its annoying when especilly simple pass off work (problem happens very often, but I'm not complaining here).

  The thing I've tried:

  -Change of mouse and video installation, screen, mouse and other dirvers in addition to their update.

  -With the help of build of Windows and external software trouble and repair ultilities.

  Updtading - OS (why? dk but I tried alternatives).

  -Electricity disconnection when this occurs (as sugested in other forums), did not work.

  -Clean the fan and avoiding any external particle on the laser mouse.

  Well well, not that im complaining about the laptop, which work very well over a budget, like it, it's just that the error which bug my HP to be good (if not perfect) experience, please someone help on this im looking forward to HP service work to help me fix this problem for good, is really annoying, especially when you try logging thx.

  I'm not Dunidar thank you for you time to grow another, I opened the cover of portable and yes I found a few in there, dead ants cleaned that upward I don't mind much about warranty or anything like that in any case thank you for your attention, you did a wonderful job help here , the problem has not demonstrated again the science I did it this morning so I think the ants where to do this kind of electric bridge I guess I DK much to this topic but, once again, thx for you excellent support cheers.

• installation of updates from windows to windows 7 after 10/25/10 makes me lose all access to the internet (wireless and others)

  I have r530i samsung that is less than 8 weeks, after that 1 week, a new set of windows udates appeared which caused my Internet to lose. I spoke to my internet provider, between us, we confirmed there was nothing wrong with the connection or otherwise (I was able to access the internet from another PC using the same provider and user name) it was suggesteed downloads had done something for my wirless modem.

  I did a complete system restore and it worked just fine.

  a few weeks later, the same problem occurred after some updates of windows. Unfortunately the fault can be diagnosed because I can't access the internet? I did a full recharge of the system of 23/10/10, this has worked fine, windows then downloaded updates and my internet access has failed once again so I have disabled the automatic updates and everything seems fine.

  all connections work well, I can still see the home hub it won't let me access the help please

  Hello

  There are various reasons for internet connection doesn't work after installing the update of windows on the computer.

  First of all, I would say that you check the update is causing the problem.

  To see the updates are installed on your computer

   

  (a) open the updates installed by clicking the Start button, click Control Panel, clicking programs, and then r undeprograms and features, click view installed updates.

  Once you know the update's KB number then visit the Microsoft Download and put the number in the search box, download and install the update manually after placing the computer in a clean boot state.

  http://www.Microsoft.com/downloads/en/default.aspx

  To help resolve the error and other messages, you can start Windows Vista or Windows 7 by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

  See the link below to learn more about how to clean boot.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  Reset the computer to start as usual

  When you are finished troubleshooting, follow these steps to reset the computer to start as usual:

  (a) click Start, type msconfig in the search box and press ENTER.

  (b) If you are prompted for an administrator password or for confirmation, type your password or click on continue.

  (c) under the general tab, click the Normal startup option, and then click OK.

  (d) when you are prompted to restart the computer, click on restart.

  I hope this helps!

  Halima S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Impossible to update of Windows and other software (stuck at 'Check updates')

  My laptop cannot update windows, it get stuck at "Checking updates...". The same thing happens if I try to update other software, including antivirus software. That they be stuck all trying to update or to tell me that they cannot connect to the server.

  
  

  Thank you!

  Hi mariusov,

  Run the tool for troubleshooting under construction and check if it helps, here is the link, you can see: the problems with installing updates:http://windows.microsoft.com/en-us/windows7/Troubleshoot-problems-with-installing-updates

  Try the steps listed in the link below: you may encounter temporary connection related errors when you use Windows Update or Microsoft Update to install updates: http://support.microsoft.com/kb/836941

  Thank you, and in what concerns:

  Samhrutha G S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Fan control with 5750G and other machines problems

  Lets start with stating that the 5750 G (and other models with same design cases) has lots of GPU and overheating problems:

  • Overheating 5742: http://community.acer.com/t5/Acer-Notebooks-Netbooks/Entire-CPU-Overheating/m-p/10233#U10233
  • 5552 overheating: http://community.acer.com/t5/Acer-Notebooks-Netbooks/Overheating/m-p/8221#U8221
  • 5745 G overheating: http://community.acer.com/t5/Acer-Notebooks-Netbooks/GPU-Overheated/m-p/10189#U10189

  As well as the mysterious GPU problems:

  • http://community.Acer.com/T5/Acer-notebooks-netbooks/Acer-5750G-GT540M-problem/m-p/8061#U8061

  This problem is happing on computers between 12 and 20 old frames. Although the user

  • Using a fresh install of windows.
  • Uses the latest GPU driver.
  • Use the BIOS more recent (1.21 for my 5750G).
  • A cleaned the dust from heatsink and fan.

  So that's the problem! Thermal and non-functioning fan control past!

  So it goes like this:

  End of one your PC starts to slow down: This is because the heat past at low price, acer puts on their laptop begins to degrade. This means that even if the fan trying to cool the CPU and the GPU. The heat generated by the CPU and the GPU may be transferred on the radiator. Thus the CPU and the GPU lower their performance so that the computer does not so hot that it cannot work. And damage the CPU and the GPU.

  After a bit more time the PC begins to close when you use more intense programs / games:
  This is because that which has degraded the heat past so that the computer becomes so hot than its cutting himself to avoid damaging himself.

  So what's the problem?: I mean that acer can not simply replace past heat each contact? So what can they DO?

  Here's what Acer should do: Do a BIOS 1.22 WITH CUSTOM FAN CONTROL!
  It would be easy! While the main problem is the thermal past. There is another problem:

  Fan will not go 100%: when my 5750 hits 95 degrees Celsius. It is still running the fan speed of ~ 60-70%!
  When it hit 103 degrees Celsius. Just 2 degrees, far from extinguished to prevent critical damage. She is STILL going to ~ 60-70%! Acer... I know that the fan can be turned to a higher speed. Because when I turn on my 5750G after he himself has just cut off due to overheating. He rotates extremely fast fan! But just for a few seconds. Then he goes back to the being to slow to cool enough.

  Acer... Why not do that? ! : Come on Acer! Do it! Make a new BIOS, I would be happy. And I know that Acer is not a * beep * ty company. But actually listens to their customers! If your worried that some people would go in the BIOS and the fan settings so that they broke the laptop. Then just have a big WARNING: "Guarantee will be woid entering this option" or a "to activate this option go to Acer.com/XXXX and type the code. Follow-up of the caveat "the guarantee will be void.

  Please Acer. Give people who know what they make of the option to do so!

  Im going to this ends with a quote from another post on your forum:

  «I look a little, but have not found anything to give a bit more power the fan...»
  Acer could not just add a few adjustments of fan to the bios?

  Quote this post: http://community.acer.com/t5/Acer-Notebooks-Netbooks/Entire-CPU-Overheating/m-p/12211/highlight/fals...

  Hello

  Today I can finally post what you are waiting for. The fan controller tool was developed in a public place.
  Anyone who decides to install this tool, please take note once more:

  • Acer does not support this tool on systems from laptops Aspire 5750 G / 5755G.
  
  
  • Acer does not support this tool on Acer OEM Software (your laptop comes with Windows 7 installation).
  
  
  • Users with other portable model should not use this tool. This will be entirely at your own risk.
  
  
  • Other OS can run this tool, but Acer does not test or review it. Acer is not responsible for any bad consequences when using the tool in that mentioned other environments.

  Official statements made, here are the goodies. Be sure to download the PDF file as well, if you want to check the installation process:
  FTP://ftp2.Acer-euro.com/notebook/aspire_5750G/fan/FanController_V1.0.0.3.zip
  FTP://ftp2.Acer-euro.com/notebook/aspire_5750G/fan/SOP_AS5750G_Fan_Control_Utility.PDF

  Feel free to have a discussion open after this post on the results. I tell you what I'll be less frequent in this topic, though.

  Anyone who still has problems when running this tool is advised to contact Acer support and get their laptop repaired.

  We thank all for your patience, hope that this helps out you.

  Kind regards

  Rolf

• How to install windows 7 Firefox without 'Ask search' and other software?

  I would like to install Firefox pure, lean without other complementary software, such as "Ask search. Please download from the home page of Mozilla. Thank you for helping.

  I moved cela Firefox Support Forum.

  You have two options.
  (1) uninstall the Ask toolbar to page addons (menu button of Firefox (upper right corner)-> Add-ons or Ctrl + Shift + A
  (2) uninstall Firefox and then re - install from Mozilla directly

  • www.getfirefox.com

  Yahoo!, Ask, and other companies to combine their toolbars and other nonsense with Firefox it is therefore preferable to get it directly from Mozilla to avoid any "bloat-ware".

• Sync blackBerry with Blackberry classic and computer software problems

  I get persistent on Blackberry link error messages when I try to sync my BB classic with my computer. The message reads: "CPreferences Manager: Configuration for, preferences, Account_5_327628, SyncAccountld_2 not the value inTransConfig.xml for translator RimBB.'»

  What this means and how can I fix the problem, so my sync can be successful, please?

  Thanks a lot for the suggestion. I followed the procedures. I already have the latest version of Windows 7 Professional on my computer and the 1.2 update link to BlackBerry. I've also posted the order suggested in the command prompt. After pressing the Enter key, I launched the Blackberry link again. Unfortunately, the same errors occurred.

  Rather than trying to contact BlackBerry Technical Support Services, I watched again the synchronization process... There seems to be no problems regarding synchronization of the Contacts. However, the mechanism seems to hesitate on the sync of the calendar entries. On this basis, I went back and changed my settings for the calendar so I changed to a two-way synchronization between the device and the computer for a one-way ticket between my device and the computer with a preference given to my device. A message indicating that some elements would be removed from my computer and others from my camera. Given that I printed on my calendar every week from Outlook, I felt that it was worth sacrificing some entries if he allowed the synchronization to continue smoothly. So I accepted the deletions. When I tried to sync again, no error has occurred. At this point I returned to two-way sync as I had before, but always with the preference given to my device.

  Perhaps the above can be useful to others who are struggling with the same error message.

• Security update for Windows Vista KB3013455 distroys text fonts display in Notepad ++ and other software

  Update security for Windows Vista for x 64-based Systems (KB3013455)
  destroyed the fonts in Notepad ++ and other text editing systems.
  I have to keep uninstalling.

  It is being investigated. For the time being you can click and click on "Hide update" to prevent it to be installed.

• help for my toshiba satellite L650 Moose drivers for win 7 and other software

  where I can download my toshiba satellite L650 utility such as toshiba eco, toshiba pc health moniter and other audio Moose vedio drivers?

  Visit the Toshiba support site and click on "Download" in the menu bar at the top: http://www.csd.toshiba.com/cgi-bin/tais/support/jsp/home.jsp

• Does not see the utility Airport Airport Extreme or any other device in the House on the network. However, all devices are getting internet.  Backups on external hard drive are going wireless, too. Yosemite day and other software. What should do?

  Said Airport utility cannot find extreme AP, which used to be on the network and shows no other devices on the network. But all devices (MBPro, MBAir, iMac, iPod touch, iPad 2 air2) are connected to the internet. Wireless backups on external drives are being completed. El Capitan 10.11.2; Airport Utility 6.3.6. How do "seen it all" again?

  What should do?

  All you can do is to try to circumvent some of the bugs crawl into El Capitan.

  Given that the AirPort Utility becomes easily confused about what are the devices on the network, it will sometimes help to perform a complete cycle of power on the network. If you want to try it...

  Power off all devices on the network, routers, computers, accessories, mobile devices, printers, etc... in any order you want

  Wait a minute

  Turn on the modem first and let it run by itself for 2-3 minutes

  Then, switch on the device connected to the modem and leaves turn a good minute

  Keep power devices one at a time about a minute out until the entire network is back

  Recheck the AirPort Utility

  If still no luck, we will have to try some repellent on Mac.

• Satellite Pro U400 and fingerprint software problem

  Hello!
  Since a long time, my Fingerprint Software gave problems.
  About 2 days after receipt of the computer, I started to get an error message saying "Specified Database not found" or "Hardware not found footprints" (something similar to messages!)

  Because then I never really used it, but now, since the last update "Authentec", I thought that it can start working.
  The problem is, once I installed the update, I get an error saying "Remove old version, given to zero computer.
  So I did it, I removed the old TrueSuite Access Manager and restarted the computer.

  Once restarted, the Autentec Installer (new updated) started to install, but give me again the same error message 'remove old version, given to zero computer.

  I checked for the remains of the old software, but he found nothing.

  I won't be formatting my computer to do this, is there another way I can fix this?
  Thank you

  Hello

  I think the update found garbage in the registry and I think that after the Truesuite software has been removed, you must clean the operating system using the CCLeaner.
  After cleaning the operating system and the registry, you must restart the laptop before you repeat the update procedure.

  Maybe you should also install a newer version of Toshiba page before starting the update.

• HP Pavilion dv6: HP Pavilion dv6 / VGA graphics driver wont install and other software

  Hello

  I decided to re open my OLD laptop that I bought in the United Kingdom in 2007, it is a HP Pavilion dv6, and I noticed that my HARD drive crashed and I don't have the slightest idea what to do, it is said he used to bot upwards, and my friend told me it's toast...

  SO I bougt garage a new HARD drive an SSD and I installed windows 7 on it and everything works very well, EXCEPT my drivers do not work, IT can't find any 'graphics card' installed audio or any other thing, I tried to use your Web site to get the latest drivers but when I do he collapsed instaltion because of the wrong configuration or something I can't quite is Remember, but I have NVIDIA and when I used the PC until it had great graphics, as is a multimedia PC...

  I have a label UNDER the PC windows key, but it's very fainted and I don't know what he said, so I could have used the wrong windows as it says it's not good.

  I really need some help with what I need to use this laptop for my better realationship operate as I sat at a large part of the office and with a laptop, I can be around my family many more.

  Concerning

  Yes, it seems that the support page does not work.

  They had a major problem with the support pages earlier this week, and it looks that it arose again.

  The only BONE that appears is W10, and of course, there are no drivers listed.

  Well... I can probably help you with some of them the hardware manufacturer's Web sites.

  See if the graphic driver directly from AMD works for graphics.

  http://support.AMD.com/en-us/download/desktop/legacy?product=legacy2&OS=Windows%207%20-%2064

  Ethernet would be the third driver on the list.

  http://www.Realtek.com.tw/downloads/downloadsView.aspx?langid=1&PNid=13&pfid=5&level=5&Conn=4&DownTypeID=3&GETDOWN=false

  Card reader: first driver on the list...

  http://www.Realtek.com.tw/downloads/downloadsView.aspx?langid=1&PNid=15&PFID=25&level=4&Conn=3&DownTypeID=3&GETDOWN=false