DV7 - 6160ca usb 3 drivers does not

Similar Questions

• Windows 7 x 64 - HP DV7 - 7135US - USB 3.0 does not not at all ports

  I have a HP DV7-7135US causing me severe headaches.

  For the past month I lost access to my USB 3.0 ports. They do nothing - NOTHING.

  I went to the road to reinstall the Intel chipset drivers and drivers USB 3.0 Intel and HP. When I plug anything into the ports, it's as if I did nothing at all. USB keys are not detected, it is as if the ports have been disconnected from the motherboard. USB 2.0 and 3.0 external drives are not detected, or they try to turn or show any activity on their LEDs.

  I also went the road to reinstall the operating system from the ground up (I hate that loads the OEM manufacturers put on their systems!), only install HP drivers and applications on the HP site. I also did the same thing but only install drivers from the Intel Web site - yet - nothing.

  Nothing related to USB only appears in all the event log.

  A single USB 2.0 port works fine - 100%.

  Any feedback is GREATLY appreciated! I really wouldn't know this to send to warranty work - I got it since September!

  Thank you!

  [MORE INFORMATION]
  NOTE: Everything seems to be normal in Device Manager!

  Try a hard reset. Disconnect all external devices first.

  battery and power cord 1 / removal

  2 - Press the power button for 30 seconds

  3 reinstall cord battery & power

  4 powers on and immediately tap / hold key F10 to enter the BIOS. Once to reset the default settings, usually by tapping f9 key. Save & Exit.

• HP Pavilion dv7-6166nr USB 3.0 does not work

  My two USB 3.0 ports left do not work. In Device Manager it can't find the drivers for them.  I searched the forums, tried other drivers, tried the drivers for the latest drivers from Renesas USB 3.0 Host Controller and those who do not work either. None of the drivers that I download seem to work including those listed for my laptop on the site Web of HP.com.

  Any help would be great, thanks.

  I also tried: USB3.0_allOS_2.1.28.1_PV.exe with no luck.

  Hello:

  Install the AMD chipset drivers and restart. You want the first file on the Web page.

  http://support.AMD.com/en-us/download/chipset?OS=Windows%207%20-%2064

• Is there a download from Microsoft which will create a bootable usb media that does not have the drivers?

  Original title: A bootable Windows 7 media

  I work on a Lenovo 2-in-1 with Windows 7 (for games) and 10 (for a normal use) Windows to dual-boot. I created a USB stick with Windows 7 Pro (64 bit) of a legitimate Windows 7 Pro disc. The computer starts on the usb device and plays normally, however, one of the steps asks a driver for cd/dvd and this 2-in-1 (Lenovo Flex 3) doesn't have a built-in CD/DVD. All other drivers are located in a folder system. My question is, given my key Windows 7 can I create a new bootable media that does not demand drivers? Is there a download from Microsoft which will create a bootable usb media that does not have the drivers? I know that I can reinstall the drivers manually after the installation.

  Thank you

  Matt Armshaw

  Windows 7 or Windows 10 come preinstalled?

  If you install Windows 7 on a system that is preinstalled with Windows 10, you must do the following before:

  -Disable the secure boot UEFI

  -Disable the quick start

  -L' install created media can be corrupted.

  How to: Dual Boot Windows 7 or Windows 8 with Windows installed 10 first

  I suggest that you try to create another bootable copy.

• USB 3.0 does not work on HP Pavilion 23 g010

  USB 3.0 does not work on HP Pavilion 23 g010. Can not find the driver from HP site that works. Can anyone help please because it is a new computer? Windows 8 is installed, but owner downgraded to Windows 7. I tried the drivers that are supposed to work and the said error box "this computer does not meet the minimum requirements for installing this software"... don't know what to do but would appreciate greatly any input...

  Hello:

  Your model has an AMD chipset and processor.  Therefore, the Intel chipset driver will not work.

  First, install the AMD chipset driver and restart.

  You want to download the 49.7 MB file.

  http://support.AMD.com/en-us/download/chipset?OS=Windows%207%20-%2064

  If that does not install the USB 3.0 drivers (see the file they are included), then download and install both of these drivers and USB 3.0 will work for sure in this way.

  http://h20566.www2.hp.com/portal/site/hpsc/template.PAGE/public/psi/swdDetails/?sp4ts.oid=5359417&spf_p.tpst=swdMain&spf_p.prp_swdMain=wsrp-navigationalState%3Didx%253D%257CswItem%253Dob_123787_1%257CswEnvOID%253D4058%257CitemLocale%253D%257CswLang%253D%257Cmode%253D%257Caction%253DdriverDocument&javax.portlet.begCacheTok=com.vignette.cachetoken&javax.portlet.endCacheTok=com.vignette.cachetoken

  http://h20566.www2.hp.com/portal/site/hpsc/template.PAGE/public/psi/swdDetails/?sp4ts.oid=5359417&spf_p.tpst=swdMain&spf_p.prp_swdMain=wsrp-navigationalState%3Didx%253D%257CswItem%253Dob_118744_1%257CswEnvOID%253D4058%257CitemLocale%253D%257CswLang%253D%257Cmode%253D%257Caction%253DdriverDocument&javax.portlet.begCacheTok=com.vignette.cachetoken&javax.portlet.endCacheTok=com.vignette.cachetoken

  If there is any other drivers you need for this model, please let me know.

• Is there such a thing as a USB wireless, that does not need USB cable upstream that goes into the usb slot in the main computer?

  Is there such a thing as a USB wireless, that does not need USB cable upstream that goes into the usb slot in the main computer? I've looked everywhere but I can't find one. I hate the son, and I try to clear my desk of as many people as possible.

  # USB is cable only.

• When I plug my portable hard drive to the usb port it does not read and display the contents...

  When I plug my portable hard drive to the usb port it does not read and display the contents...

  Hi deaza,.

  Ø Have you connected the USB hard drive to the computer directly or you have used an external USB hub to connect?

  O trying to connect to another USB port to check if it works?

  O the hardrive shows in windows of the computer when you connect it?

  Method 1:
  If you have installed security software, I suggest you to temporarily disable the security software and connect the USB and check to see if the same problem happens. Make sure that you enable the security software after checking.

  Alternatively, you can try to plug the USB key into a different USB port and check if it helps.

  Method 2:
  I suggest trying to launch hardware and troubleshooting of devices and check to see if it helps, here is the link:http://windows.microsoft.com/en-US/windows7/What-to-do-when-a-device-isn ' t-installed-correctly

  Method 3:
  If this does not help, then follow these steps:

  (a) remove all your USB devices. Use the safely remove the feature to turn them off.

  (b) open Device Manager and navigate to the section for USB. Uninstall all USB drives. There should be one for each USB port, and then restart.

  To open Device Manager, go to the link below and follow the steps:

  http://Windows.Microsoft.com/en-us/Windows7/open-Device-Manager

  (c) Windows should re - find all of the devices. If it is not the case, note the error message and let us know.

  You can also navigate to the link below and follow the steps to install the USB device.

  http://Windows.Microsoft.com/en-us/Windows7/install-a-USB-device

  I hope this helps. Let us know the results.

  Thank you and best regards,

  Srinivas R

  Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• 15 - p245sa: USB drivers does not not for the 15-p245sa

  Hello

  I recently put on windows 7 (downgraded from windows 8)

  All right, except that the USB is not working... No USB is detected or is even turned on.

  At first he could not update the driver by itself so I downloaded driver HP chipset and installed and now its labelled as:

  Mobile 5th generation Intel (r) Core USB Controller xHCI - 9CB1

  However, it made no difference and still make the USB does not work.

  Here is the hardware ID:

  PCI\VEN_8086 & DEV_9CB1 & SUBSYS_2293103C & REV_03
  PCI\VEN_8086 & DEV_9CB1 & SUBSYS_2293103C
  PCI\VEN_8086 & DEV_9CB1 & CC_0C0330
  PCI\VEN_8086 & DEV_9CB1 & CC_0C03

  compatible and ID.

  PCI\VEN_8086 & DEV_9CB1 & REV_03
  PCI\VEN_8086 & DEV_9CB1
  PCI\VEN_8086 & CC_0C0330
  PCI\VEN_8086 & CC_0C03
  PCI\VEN_8086
  PCI\CC_0C0330
  PCI\CC_0C03

  In the general tab, under device status, he said:

  No drivers are installed for this device.

  I'll look at the bios now, any other ideas?

  Thank you

  You are the very welcome.

  You need the driver for this device...

  Software and driver Broadcom Bluetooth 4.0

  File name: sp66402.exe

• USB 3.0 does not, Windows cannot find drivers

  Hello

  I recently got a Buffalo Drive Station axis speed HD-LXU3. I plugged in a USB 3.0 port as suggested, and Windows did not. So I tried some things and ended up plug it into a USB 2.0 port, after which he started to work very well. I also have a webcam connected to a USB 3.0 port, which the computer does not exist. So I went into Device Manager and it shows two USB controllers that not have installed the drivers. I clicked on "update drivers" and Windows have searched, but found none. I tried looking for drivers on websites (manufacturers of motherboard and processor) Biostar and AMD, but failed to find the right one. Could someone help?

  Danny

  P. S.

  Moterboard: Biostar Hi-Fi A85W

  Processor: AMD A8 - 5600K APU

  OS: Windows 7 64-bit

  I fixed the problem by reinstalling the software AMD Catalyst by selecting the option USB 3.0.

• Series USB drivers does not start error: "this device cannot start. (Code 10) »

  Hello

  I have a usb_dev_serial.inf of TI and a catalogue of security usb_dev_serial_amd64 and a folder containing the amd64
  the DLLs below.  When I used the Add Hardware Wizard to load the .inf, properties of the pilot were "this device cannot start. (Code 10)"
  Does anyone have a suggestion?
  Thank you
  Larry

  Hi Larry,

  Thanks for posting in the Microsoft Community Forum. According the description, I understand that the USB device does not work, rest assured that we will do our best to help you with this problem.

  Answering the question that helps us provide the best solution:

  1. it worked before?
  2 have had any changes made to the computer before the question?

  The Code 10 error applies mainly to the problems of hardware driver and devices or compatibility problems between the drivers of equipment and additional software that is installed in Windows. Therefore, we recommend that solve you these problems with emphasis on device drivers, configuration of device problems and hardware compatibility issues.

  Try the following and see if it helps.

  Method 1:

  Description of errors related to the 10 Code that generates the Device Manager in Windows on computers:

  http://support.Microsoft.com/kb/943104

  Method 2:

  Install the latest driver for USB and check if that helps.

  To do;

  a. click Start, type devmgmt.msc in the start search menu.

  b. right-click on the USB device and click on Update driver software.

  Updated a hardware driver that is not working properly:

  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly

  Method 3:

  Try connecting to another USB port and check if it helps.

  Hope this information helps. If you have any other questions feel free to respond and we would be happy to help.

• Gigabyt USB adapter works does not win10

  gigabyt USB adapter does not not qin 10 / 64

  HP has not posted any drivers for it. It appears in Device Manager? All other usb devices work?

• Tecra 8000 - hub USB 2.0 does not

  I need a help. IA´ve had Hi - speed USB 2.0 Notebook card
  22932 http://catalog.Belkin.com/IWCatProductPage.process?Merchant_Id=&Product_Id=1

  but still, I installed all the drivers oryginal CD it does not, as a USB 2.0 but everything also USB 1
  I have Tecra 8000 with 366 MgH processor, 6 GHG's hard drive, I use Windows XP Professional with SP2.
  Anyone know what could be the problem?
  Thank you

  Hello Mad

  In my view, this question must be sent to Belkin. AFAIK for maximum performance, computer system, peripheral and software must all support Hi-Speed USB.

  On this map, I have gift logo see Hi-Speed t.

• 16GB USB flash drive does not not on Satellite L300-11F

  Hello

  I have a laptop Toshiba Satellite L300-11F. It comes with 2 USB ports.
  I have a pendrive plus 1 GB and all recently bought a Maxell 16 GB USB key.
  The USB works flawlessly at work, desktop pc, but doesn't seem to work with the laptop.

  I managed to use that only once since the USB port of the laptop simply does not recognize.
  I can tell that the Red led does not Flash and the Flash DRIVE is not accessible.
  I tried to use the hub USB Toshiba provided, no chance either :(

  2 USB ports are ok I use mouse, digital camera with her.
  Is the 16 GB USB key, it works perfectly with other machines. * desktop pcs *.

  I'm missing a few USB drivers or what is the problem?
  Please help I need to be able to use the device on the laptop too.

  Thank you!

  Blaze

  Can you use a Flash DRIVE with a lower capacity on the two USB ports?

• Toshiba Store Alu 3.5 "1 TB external USB HARD drive does not

  I turned on my laptop with my hard drive is connected.
  It flashes blue and everything and the computer recognizes that there is a usb device it but it freezes Windows Explorer.

  When I tried to click the hard drive icon, it says the device is not accessible.
  It does not unusual noises high expectations or clicks. I tried to unplug and every bit nothing helps.

  I read somewhere else that it can be a power supply problem? (a few days ago I had a really small power cut which lasted a second...)
  I really hope that this isn't a drive failure hard because I have 250 gb of music in there! Should I send in repairs?
  If so, my data would be deleted? I had this for only less than a month.

  Thanks in advance.

  > It seems to work on other computers without problem, but on mine, it is not
  In such cases, it s not a problem of disk HARD but eventually its computer number you and, eventually, the OS does not contains some drivers / extract, etc. eventually the operating system must be updated

  Welcome them

• I have a laptop hp envy dv7 - 3723cl, the simple pass does not work

  My simple pass does not work. I have check the biometric device, the software is up-to-date, and it gives me an error code 19.

  On my installed programs I do not see the simple pass program is no longer.  How can I get the correct software to reinstall?

  Help, please

  Hi @GStefanakis ,

  Welcome to the HP Forums!

  It's a great place to find answers and information!

  You have the best experience in the HP forum, I would like to draw your attention to the Guide of the HP Forums Learn how Post and more

  I was unable to locate specific information about a desire dv7 - 3723 cl.

  How can I find my model number or product number?

  Here is a link on technet.microsoft.com that can help.   Code 19: Windows cannot start this hardware device because its information of configuration (in the registry) is incomplete or damaged

  You can try a system restore to a date well known.  Using Microsoft System Restore (Windows 8)

  If the above did not help, I uninstall and reinstall the software Simplepass.  Using the Recovery Manager to restore the software and drivers (Windows 8)

  I hope this helps!