HP Pavilion dv7-6166nr USB 3.0 does not work

Similar Questions

• HP Pavilion dv7-2070ed: original program software does not work in window 10 pro and program

  Hello.

  I changed the windows for a full installation of windows 10 pro due to the corruption of the window vista recovery disk. (lost the new build software pre installed). Before I had vista Home premium. Some of the original program software don't work with wins it 10 pro. I found a rear window and HP Media Media Center smart webcam. All others on HP Smart media are not working due to no driver or competable with 10 pro wins. Is there some alternate software with the same use? I know that hp will not update the software program at the present time, alternatives is a server of HP smart media, but I would like to have a similar cause of program I liked the program.

  Anyone has a suggestion

  Hi Wawood

  Thanks for your solution. I've tried, but it does not work what so ever. I guess I better to forget and take my lost. Quite sad but its one of the things that fact you win and you lose a game. Some programs are perfect, but if the company of the pc or laptops drivers or updates on legacy systems we can not anything on this subject. Guess that's one of the problems with this new victory 10.

  Thanks anyway

• Pavilion DV7-3063 cl: DV - 7 does not work on a/c

  My computer is no longer works on a/c.  When I plug it in, lights up the AC and the battery charges.  When I turn it on, it works fine for 5 minutes, then the a/c light goes off and it only works on battery.  Soon as the battery discharges, it shuts down the computer.  The only way I can get the "charge" light to come back is to remove and replace the battery. Only changes I made to the computer are that I replaced the hard drive with a solid state unit.  I bought a new battery (which is the same as the original).  I tried 2 different adaptors with the same result, ran the diagnostic on the battery that completed successfully.  I'm at my wits end with this.  Can you please point me in the right direction?

  I was under the impression that the computer needs to operate with no battery.  Is it a motherboard problem or something that can be repaired without replacing the motherboard?

  Also, I'm a computer technician in systems with 40 + years of experience... Everything simply never seen anything like it!

  Thank you!

  Your laptop DC connector is the modular type that plugs into a header on motherboard and is pretty cheap.

  You can try the method to enter the Device Manager and uninstall the control device of method of battery and battery unit. Once the devices are removed, restart the laptop. The Windows 7 operating system should repopulate with both devices Device Manager. It can rejuvenate the battery recharge.

  You can also try the command-line command sfc/scannow method to check the operating system files for corruption and the replacement of the corrupt\damaged files.

  If none of the three suggestions help does not, then replacing the motherboard or sourcing a replacement notebook will be the only alternatives I know. You can use an external hard drive enclosure or USB to sata connector to allow the copy of the important contents of the hard drive to another PC.

• USB 3.0 does not work on HP Pavilion 23 g010

  USB 3.0 does not work on HP Pavilion 23 g010. Can not find the driver from HP site that works. Can anyone help please because it is a new computer? Windows 8 is installed, but owner downgraded to Windows 7. I tried the drivers that are supposed to work and the said error box "this computer does not meet the minimum requirements for installing this software"... don't know what to do but would appreciate greatly any input...

  Hello:

  Your model has an AMD chipset and processor.  Therefore, the Intel chipset driver will not work.

  First, install the AMD chipset driver and restart.

  You want to download the 49.7 MB file.

  http://support.AMD.com/en-us/download/chipset?OS=Windows%207%20-%2064

  If that does not install the USB 3.0 drivers (see the file they are included), then download and install both of these drivers and USB 3.0 will work for sure in this way.

  http://h20566.www2.hp.com/portal/site/hpsc/template.PAGE/public/psi/swdDetails/?sp4ts.oid=5359417&spf_p.tpst=swdMain&spf_p.prp_swdMain=wsrp-navigationalState%3Didx%253D%257CswItem%253Dob_123787_1%257CswEnvOID%253D4058%257CitemLocale%253D%257CswLang%253D%257Cmode%253D%257Caction%253DdriverDocument&javax.portlet.begCacheTok=com.vignette.cachetoken&javax.portlet.endCacheTok=com.vignette.cachetoken

  http://h20566.www2.hp.com/portal/site/hpsc/template.PAGE/public/psi/swdDetails/?sp4ts.oid=5359417&spf_p.tpst=swdMain&spf_p.prp_swdMain=wsrp-navigationalState%3Didx%253D%257CswItem%253Dob_118744_1%257CswEnvOID%253D4058%257CitemLocale%253D%257CswLang%253D%257Cmode%253D%257Caction%253DdriverDocument&javax.portlet.begCacheTok=com.vignette.cachetoken&javax.portlet.endCacheTok=com.vignette.cachetoken

  If there is any other drivers you need for this model, please let me know.

• DV7 - 6160ca usb 3 drivers does not

  So I did a fresh install of windows 7 on this laptop and the whole left side usb does not work and I can't get the usb3 drivers to load. I downloaded several different drivers on the website and none worked. The laptop has only four days.

  I found the drivers it's amd usb drivers 3. I never knew they did some lol. learn something new ever day. Would be nice if hp in the list of drivers in the title of the 6160ca driver page. Driver that worked for me was http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en&cc=us&prodTypeId=321957&prodSeriesId=5098215&swItem=ob-97269-1&prodNameId=5098217&swEnvOID=4058&swLang=13&taskId=135&mode=4&idx=3

  My wireless was also broadcom who also wasn't on the list

  Thanks for your help.

• Pavilion g6 2307el: LEGACY BOOT SELECTION does not WORK

  Hi, first sorry for my bad English , I have a big problem...

  4 days ago, that I decided to install a new os on my pc (pavilion g6 2307el).

  I installed win 7 64 bit, and to do this, I enabled the legacy boot.

  now, I have some problems with some drivers and for this reason I want to change my os originally win 8 64-bit.

  I have the original cd of victory CV 8 (when I installed win 7 has deleted everything on my pc; recovery partition ecc..) but it does not work... Infact when the legacy box is turned on and I press the f9 key I see 2 option. boot to the efi file or boot from the hard drive (I can't see cd boot or boot usb or other) and when I put inherited boot off the system tell me that it isn't any os on my pc, and in this case when I Press f9 I don't see anything...

  Please, I want to return my windows 8...

  can someone help me?

  Hi @pavilion9512

  Thank you for your request! No worries for tyour not English, also long as understand us each other, that we are very well.

  I understand that a few days ago, you wanted to downgrade to Windows 7, but after doing if some drivers were not available.

  Now, you want to perform a recovery from the disk that you created but are unable to get the option to boot to the optical drive.

  Here is a link to HP Notebook PC - configuration of the Boot in the BIOS system order which will facilitate this process.

  Good luck!

• HP pavilion dv6 notebook (my dvd burner does not work

  I have a hp pavilion dv6 laptop. my burner does not work. I went to the Device Manager I uninstalled, shut down the computer, restart the computer, the device mgr.enable the writer went I have little yellow guest. still, the writer does not.

  I perform a driver update, the response was: the driver is already installed is to this day. My dv6 is 28 months old.

  need some advice.

  under Device Manager.  CD-ROM/DVD-rom readers

  HP cddvdwsn-208bb

  "device usb HP dvd writer 940D thank you billy'g"

  Hello

  Try please run now from the following link:
  
  http://support.Microsoft.com/mats/cd_dvd_drive_problems/en-us

  Kind regards.

• USB 2.0 does not work in bootcamp Windows 10

  Hello

  I try to use my USB 2.0 USB drive on my MBP 13.3 "in bootcamp Windows 10 and it does not appear in windows Explorer. The USB key is displayed in the device however Manager. I tried my hard drive that is USB 3.0 and it works fine, but the USB does not work. I have tried many different solutions and none seem to work including physical relocation and replacing the USB name i.e. H: U:. In disk management, the device is there but says "no media" below.

  Someone at - it suggestions as to how I can get the USB appear in Windows Explorer and access the files?

  Bravo to all the answers in advance.

  the device is considered that the format is not. In some cases shaped on the Mac in Fat32 or ExFat is not readable under Windows. Reformat the Windows Fat32 or ExFat Device Manager device, it will destroy the data and mount the drive. In turn the unit may become unusable which can occur over time.

• The right side and express USB card reader does not work

  Hello

  The USB 3.0 right on my rMBP does not work. I have can´t to connect any device to this side. No connection or power.

  Express card reader doesn't work or the other. Finder or disk utility will not show map of mountain.

  I can´t find the card express under system reports reader.

  I ran a test for diagnosis of Apple without any problem.

  I have reset the SMC & LANDAU.

  I reinstalled the operating system without success.

  Anyone who knows how to fix this?

  MacBook Pro with OS X El Capitan 10.11.5, Retina display

  Can someone help me here, please!

  Based on what you have tried and if can't see any device in disk utility, you are dealing with a hardware problem.  Your best option is an appointment at an Apple store for a FREE genius bar.

  Ciao.

• Portege R500 - keyboard USB Legacy support does not work

  I have a Portege R500-124

  I use it to dock in the office and the lid is closed, so I need to enter a password for DriveCrypt and generally control the boot/BIOS from a USB keyboard. But no matter what I set the setting that is inherited from the USB in the BIOS, the USB keyboard does not work. I tried the keyboard connected directly to the R500 when undocked and it's all the same. I also tried BIOS 1.6 and that's all the same.

  USB keys are working and I can boot from them, but no work of measures (for example, F12 to choose the BOOT device) keyboard - the R500 doesn't seem to have the functional USB keyboard support until an operating system (Windows or Linux) has started.

  Any ideas?

  Ian

  > .the R500 does not appear to be the functional USB keyboard support until an operating system (Windows or Linux) has started.

  I can't confirm this, but I'm afraid you're right about that.

• I have a laptop hp envy dv7 - 3723cl, the simple pass does not work

  My simple pass does not work. I have check the biometric device, the software is up-to-date, and it gives me an error code 19.

  On my installed programs I do not see the simple pass program is no longer.  How can I get the correct software to reinstall?

  Help, please

  Hi @GStefanakis ,

  Welcome to the HP Forums!

  It's a great place to find answers and information!

  You have the best experience in the HP forum, I would like to draw your attention to the Guide of the HP Forums Learn how Post and more

  I was unable to locate specific information about a desire dv7 - 3723 cl.

  How can I find my model number or product number?

  Here is a link on technet.microsoft.com that can help.   Code 19: Windows cannot start this hardware device because its information of configuration (in the registry) is incomplete or damaged

  You can try a system restore to a date well known.  Using Microsoft System Restore (Windows 8)

  If the above did not help, I uninstall and reinstall the software Simplepass.  Using the Recovery Manager to restore the software and drivers (Windows 8)

  I hope this helps!

  

• Satellite Pro L20-212 - USB 2.0 does not work

  Hello

  I own a * Satellite Pro L20-212 *, * Windows XP (SP2) is installed, but USB2.0 does not work *. I see nothing on USB 2.0 in the Devicemanager and the speed of the USB 2.0 devices attached is at the level of the USB 1.1.

  I don't know what information is needed to help me with this problem as it should normally work on my laptop (and I know that the laptop has USB 2.0 ports).

  What I have to install a special driver to use USB2.0 or is there any software on my laptop that I need to activate?

  Thank you very much
  Frank

  Hello

  Did you install the image on the Toshiba Recovery CD? This image contains the Windows operating system, Toshiba drivers and additional utilities. After installation, everything should work fine, and also the USB ports should work also.

  The USP ports, you can find in Device Manager in the serial BUS controller universal section. Open the tree and check if there is some yellow exclamation points.
  Then try to remove the Device Manager, the controllers and the USB hub and restart the laptop. After restarting again the OS should recognize USB controllers deleted again.

  I hope that this accelerated procedure will help you.

  Greetings

• USB 3.0 does not work

  Hello

  I have a laptop Lenovo B50-45. The two ports USB 3.0 on the left side does not work, even if I installed everything I found on the "Drivers" of the company's Web page.

  How can I work?

  Try to install the latest drivers for usb 3.0 chipset support

  http://support.AMD.com/en-us/download/mobile?OS=Windows%208.1%20-%2064

• IDL audio driver on my HP Pavilion Sleekbook laptop problem. Sound does not work

  Hi, I have a HP pavilion Sleekbook 14-b029au and my sound does not work. I can't control the speakers of keyboard.

  I clicked on the "speaker" icon on my computer and it says that "no audio devices are installed." I went and downloaded an IDL HD Audio CODEC file on the HP site, but when I tried to install it, it failed. Now, when I have the audio troubleshooting it is said that "IDL HD Audio CODEC has a driver problem" and "hardware changes are not detected.

  Help!

  Hello fm111,.

  I would like that you can use the Recovery Manager and restore your drivers and software.  Follow the troubleshooting steps and then let me know if it helps to solve your sound problems.

  Good luck!

• I have a hp pavilion dv9205us laptop - Alt print screen does not work

  I have a hp pavilion dv9205us laptop - Alt Print screen (single screen) does not work - operating sys is Vista but XP Professional is my Microsoft application - I can Alt scree printing when I have a keyboard plugged in. - but without the HP laptop has only Prt sc (which is the option further down on the personal key) - without the remote keyboard how can you alt info impression of individual office to another doc. ???

  Thank you very much - it worked, and then just to screen individual, you want to without the entire background behind it - Alt / button FN and Prt Sc then allows me to get that. Once again thank you.