DV7-lights remain on after stopping

Similar Questions

• LAPTOP HP 15: BUTTON (F12) WIRELESS LED LIGHTS AMBER COLOR AFTER STOP OF THE LAPTOP

  THE BUTTON (F12) WIRELESS LIGHT AMBER COLOR AFTER STOP OF THE LAPTOP. THE AMBER LIGHT LIKE THAT AFTER PRESSING THE POWER BUTTON ON THE LAPTOP. MEWANS TI LAPTOP DON'T SE NOT GOOD SHUT DOWN ON GIVING THE STOP COMMAND. ASK FOR HELP ON THIS ISSUE TO YOU.

  Hello

  Try disabling the startup of Windows 10 hybrid - you can do the following.

  Open settings and select System.  Select food and sleep, and then click additional power settings - in the next window, click on "Choose what the power button" in the left pane.

  In the next window, click on "Change settings that are currently unavailable" (close), then Remove the check mark from the box against 'Turn on a quick start (recommended) '.  Click on the button Save the settings, and then close windows open and stop the laptop by right clicking on the icon in Start Menu, select (Admin) command prompt and click 'Yes' to the uac prompt.

  Type (or copy and paste) the following command (including spaces) and click Enter.

  Shutdown /s /t 0

  Start the laptop and let Windows take over completely for a few minutes before checking if it is now shut down properly in the Start Menu.

  If this has fixed the problem, it may be useful by turning the quick start back on - sometimes simply remove and re-create the file will solve the problem.

  Kind regards

  DP - K

• S5-1224 blue power light stays on after stopping; What happened to the orange light "sleep"?

  I have a Slimline Paviliion S5 - 1224.  No changes or additions were made to the material.  When I stop the machine, it is used to change the orange or the wide power led.  Now, the blue power light stays on and blinks after power off the power.  The light on the adapter bluetooth in the front USB port stays on, too.  After removing the USB BT adapter, the light on the adapter goes off, indicating that the power is off to this USB port.  But PC power light blue is not far away, even when it is disconnected from the wall outlet.  It's as if the machine is haunted.  I unplugged the decision-making and the left that it disconnected for more than a week, but the blue light on the front of the machine never went out and is still on, even if she wavers and seems to fade a little.  When I turned on the rear, the light back to him is normal on State 'blue '.  Power off, blue light stays on.  Disconnected from the plug, light blue stays on.  I'm afraid to leave this thing in the House and will probably trash if someone does not have a solution.  Anyone who has ever seen anything like that?  All my friends of teckie IT are puzzled and suggested I post here to see if anyone else had the same problem.  Don't bother taking repair.

  UPDATE: I removed all devices and low and behold, when I unplugged my BluRay USB drive, the lights are all on the CPU.  I restarted, close, tried to sleep and Hibernate and everything works fine now.  I guess that the BluRay player was watching somehow the CPU to turn it off.  It is a unit that is known for needing a huge amount of energy to function properly.  Naturally, the Blu - Ray player is not get reconnected to this HP PC.   Now I use with my Mac.

• Light remains off after plugging in the power adapter.

  I recently bought a replacement battery for my Toshiba Satellite running Windows XP. I started the new charge battery and removed the computer AC adapter to make sure that the battery was functional. However, when I plug the AC adapter in, the backlight is out.  If I restart Windows, the backlight turns on, but if I disconnect/reconnect the AC adapter, the backlight is turned off again. So, the backlight works, but for some reason, she turns to disconnect the AC adapter.

  Hello Pmorawski,

  Thank you for your message.  It is a Toshiba hardware problem and your question would be better suited for Toshiba.
  See you soon

  Engineer Jason Microsoft Support answers visit our Microsoft answers feedback Forum and let us know what you think.

• the light remains on my HPPSC 1610 printer and told to stop. It does not start yet either.

  The light remains on my HPPSC 1610 printer and said "shutting down", but is not closed.

  Unable to get that it is reactivated.

  You should be contacting HP about this problem, but an easy way to start again is to unplug it, and then reinsert the plug.

• Green light is on after saving workout

  I noticed that when I did a workout using Apple training app, the green light remains on. However, using a third party bodybuilding training app, the sensor lights do not remain after the recording of the session as it does with Apple app. During this experience, I also see the green icon of the person currently running on the dial of the watch.

  I was able to get light and the icon turns off by opening a series of other applications on the watch, it usually takes about three other applications to load before the icon and the light turn off. I think that's what ends up completely close the app to drive for some reason any. It's a little awkward to do and if I can't, she empties the battery fairly quickly.

  I thought maybe with last update yesterday (2.2.1), I'd see a fix, but a test this morning revealed that there is a problem.

  I wonder if anyone else can be faced with this or similar or if anyone my knowledge a fix.

  Thank you

  Hello

  Check if an activity is currently suspended in a third-party application fitness on your watch (like the app of bodybuilding or any other application of fitness that you may have installed and already used).

  If there is, put an end to this activity within this app on your watch (not your iPhone).

• Pavilion: Power switch remains on after shutdown

  Power light stays on after a stop after that recent Windows update. Must manually turn off every frustrating time.most.

  Hello

  You are welcome

  Hold down the Windows key and press R

  In the run box, type devmgmt.msc and press ENTER.

  In the Device Manager window, expand System devices, and then scroll to the Intel Management Engine Interfaceentry, cela a right click and select Properties.  Select Driver tab to see the current version of the driver for the IMEI.

  Kind regards

  DP - K

• 4540 proBook s does not start after stopping

  Brand new Probook s 4540, B7A48EA #BED, of the box. Memory 4 GB DDR3, 500 GB, processor i3, SUSE Linux disk.

  I have install the battery, connect the power supply and turn on laptop. Linux installation started, got the message 'creating recovery root tarball' and wait, wait and wait with the same message of Linux. I rebooted the laptop and after that got Linux message 'Cannot find size info part of recovery' and restarted itself, every 120 seconds.

  I turned it off, by pressing the power button / stop 5 sec.

  After that, I can't turn on laptop. When I press the power button / stop, power, drive, browser and Flash of LED wireless, you can hear disc trying to turn but fail and all the lights go out and about 2 seconds later all lights flash once again, drive tries to spin but fail again and laptop does not start.

  I have 'power reset', updated the BIOS (F.40), removed the drive and DVD drives, tried without battery but no change in behavior. I returned the drive and the original DVD. After removing the memory, portable lights, as if, and caps lock flashing of LED 3 times which means error memory. After that, I did a "reset power" once again, reinstall memory and try to start the laptop. After pressing the power button / stop at the beginning I had same symptoms I described, and after 2 portable seconds began. I installed Windows 7 Pro. Laptop computer can be restarted Windows, but after stopping, he can't press start button to start / stop.

  One way to start is to move the memory in the other slot, but it cannot start after his stop. After his return in the first memory location can be started again until the next stop. And when start, does not start from the beginning, but after 2 seconds, for his second try. The BIOS memory test, the EFI system diagnostic and memtest86 has errors. I tried with different memory module but got the same symptoms.

  Should I change a motherboard?

  After replacing the motherboard (systemboard), everything works.

• Pavillion dv9000 wireless is no longer and the light remains orange

  A few days ago I was on the internet when the internet on my laptop suddenly began to spoil, so I restarted my laptop and now the wireless in no longer works. When I turn the switch on and outside, the light remains orange and don't return to the blue. He connects well with, I use an Ethernet cable, but I need a portable MOBILE! I can't be tied down!

  I bought my laptop used a few months ago because it was cheap and I needed a college, and when I got it, it had Windows 7 above. I think I might be able to try to reinstall the wireless driver, however, I can't find one that fits my BONES. In addition, I don't even know if that would help. I am so lost on this and I really need help!

  My laptop has a bad battery and my brother also has a Pavilion dv9000 and his video card was released a few weeks ago... At this rate, if no one can help me for free (since I am a broke student, I can't afford to pay for this problem and because I have nothing to break this.) ( hp should extend his warranty since it is their defective product), I will never buy hp again, and I'll start to know how many of these products are a pit of money and how little HP seems to care about their customers!

  For me, it is a hardware failure. I tried your solution, but it did not work.

  I don't remember if I mentioned earlier in this thread, but I had a family member (who knows a lot about computer) look at my laptop. He traded my module wireless for the other wireless modules he knew worked, but none of them worked. My wireless module worked in his laptop computer, but not in mine. So, even if I had bought a new wireless module, it would not have helped. The guy who looked at my laptop even done a factory reset, but it still did not help.

  In the end, we learned that my motherboard does not accept more wireless modules. And this laptop is known for having so many hardware failures, it's not worth buying a new motherboard. For now, I'm stuck with a wireless adapter until this laptop terrible finally stops right turn.

  EDIT:
  This isn't really a solution; It is not really a big part of the solution in my case because my wallet isn't bottomless (even if that were the case, I doubt that I had still shell out money to buy a new motherboard - I would just buy a new laptop). But it is a conclusion and what I discovered.
  Pavilion dv9000 is that a waste of money and time, and HP is no longer offer a useful support to the Pavilion dv9000 users.

• What happens to Behance account after stop subscription CC?

  Hey guys, what's happening to account Behance after stop subscription CC? Will it be auto cancel or it will remain active for a period of time?

  Hello! Behance is not affected by the State of your billing, since it's free.

• How to reset AirPort Extreme 10.11.6 OS? How to work with this pinhole? I'm trying to get rid of this flashing yellow light, which began after I installed a new modem from Comcast.

  How to reset AirPort Extreme 10.11.6 OS? How to work with this pinhole? I'm trying to get rid of this flashing yellow light, which began after I installed a new modem from Comcast.

  How to work with this pinhole?

  Usually a paperclip or toothpick or ball pen.

  Stick it in the hole and reset for about 10 seconds until the front led flashes quickly.

  How to reset AirPort Extreme 10.11.6 OS?

  The software method... Unlike the above material method... is to open airport utility and select restore default settings.

  

  Both methods take you to the same place.

  You can also read the manual...

  Reset to a base station AirPort FAQ - Apple Support

• repeating beeps after stopping down. cannot restart

  Repeat single beep after stopping down and restart.

  Do not answer to command at least the power.

  Beep Code list examples:
  http://www.pctechbytes.com/BIOS.htm
  and: http://www.pantherproducts.co.uk/Articles/Motherboard/BIOSbeep.shtml

  J W Stuart: http://www.pagestart.com

• Why my human task remains open after submission?

  Hello

  you know how I can my human task automatic closing after their presentation in BPM 11.1.1.7 process?

  Each single form remains open after the filing, control passes to the next human task but the form is still there...

  Strange behavior or is normal?

  Thank you.

  Fairlie

  Hello

  If you have customized the autogenerarted send button, please call it managed below the code at the end in the bean.

  Replace taskDetails1_jspx; with the name of your page.

  FacesContext facesContext = FacesContext.getCurrentInstance ();

  org.apache.myfaces.trinidad.render.ExtendedRenderKitService service = org.apache.myfaces.trinidad.util.Service.getRenderKitService (facesContext, ExtendedRenderKitService.class);

  service.addScript (facesContext, "window.close (); window.opener.location.href = window.opener.location.href = taskDetails1_jspx; ») ;

  Return "closeTaskFlow";

• power adapter light turns off after plugging in the Inspiron notebook (5523)

  I have an Inspiron 5523, and it was working fine, until early today. I went to plug the thing to do, and it would not charge. Instead, the light on the power supply unit to the adapter stops, or would flicker. This happened with 2 load cables. I'm looking at a motherboard dead, or something else?

  Hello N108bg

  Please write to us.

  If the light on the adapter stops when it is connected to the machine, we look at a dead motherboard.

  Let us know if the system is under warranty, we will have repaired.

  Concerning

  Hema

• HP Pavilion 17-f065us: power and buttons f6 (Mute) remain lit after a stop on HP Pavilion 17 - f065us

  I have upgraded to Windows 10 in October 2015 and everything worked very well until about two weeks ago, I noticed that when I would stop my computer Power and buttons f6 would remain lit.  I would go ahead and close the lid of my but next time I would go to to open they would always be lit.  I have to press on and hold the Power button until the lights go out.

  Hello

  Try disabling the startup of Windows 10 hybrid - you can do the following.

  Open settings and select System.  Select food and sleep, and then click additional power settings - in the next window, click on "Choose what the power button" in the left pane.

  In the next window, click on "Change settings that are currently unavailable" (close), then Remove the check mark from the box against 'Turn on a quick start (recommended) '.  Click on the button Save the settings, and then close open windows and stop the laptop by right clicking on the icon from the Start Menu, select prompt (Admin) and click 'Yes' to the uac prompt.

  Type (or copy and paste) the following command (including spaces) and click Enter.

  Shutdown /s /t 0

  Start Notepad and let Windows take over completely for a few minutes before checking if the lights now now disable to stop correctly.

  If this has fixed the problem, it may be useful by turning the quick start back on - sometimes simply remove and re-create the file will solve the problem.

  Kind regards

  DP - K