DVD burning speed

Similar Questions

• Satellite Pro L20 - slow DVD burning speed

  Hi all

  I have a very annoying problem with my optical drive - he writes only CD at 6-8 x and DVD x 2! Nothing more! I have read several forums and it seems I'm not the only one with this problem. Only, it seems that there is no solution for this problem so far. The DVD multi drive is a Matsu * a 841 s UJ and its producer very has no support for this article at all. There is a firmware update available somewhere, I could find, but it only works for Vaio OEM.

  Again, I am only interested to release my drive from his normal abilities and not to unlock any area code or other kind. I just want to work to performance, I bought it, that's all.
  Can anyone help?
  Thanks to you all.

  Hi Cosmin

  You have this problem since the first day? Have you tried using different blank discs? Burning program you use? If you use for example 16 x max CD speed options are listed in the burning application?

• Carpet * a DVD - Ram UJ - 841 S DVD burnning speed

  HAVE someone at - IL FOUND in DVD THAT WILL WRIGHT A 8 x DRIVE on THIS DVD RAM. PLEASE LET ME KNOW.
  RITEC G05 NO GO will BE ONLY WRIGHT to 6 x a FEW TIMES at 2 x

  Hello

  What model of laptop comes with this drive?

• Tecra A4: Bad DVD Firmware? Burning speed only 2 x

  Hello!
  I have a laptop Tecra A4 with a Matsu * a s UJ - 831 (firmware: 1.02) DVD burner.
  The speed of this burner is 8 x dvd - r dvd + r.

  But the new media in the market can only burn through 2 x speed.
  I tested different media e.g. Verbatim, TDK, Fuji - but more than 2 x burnspeed is not available.

  Is this a firmware issue? What can I do to a better burning speed?

  THX.
  Franco

  Post edited by: Franco

  Hello

  What burning software do you use?
  To my knowledge of many burning software supports a clean burning speed.
  The application recognizes the middle and trying to burn it with more consistent speed.

  I use Nero, and to my knowledge, this program supports this recognition of the speed.

• DVD burner Mat * one 831 s: only 2 x write speed

  Hello!

  Is there a soloution for dvd loosy speed
  I have Firmware V1.02 brands I tested
  has only 2 x write speed...

  I think toshiba will/does not help.
  Any suggestions?
  Perhaps other other internal dvd burners?

  Spirit

  Hello

  I agree with San Remo, but the fact is that the firmware also may be responsible for a miracle. Strange thing is that one of my friends noticed that after new firmware the drive was not fast but very sensitive on different media (different producers).
  It will also be interesting to know what model of laptop you have.

  Good bye

• DVD burning x 4 using M30 - 901

  Hello
  I'm trying to burn data to a blank DVD - R x 4 using my laptop M30-901, however, it does not recognize the DVD. I got to know that I have to download a firmware for use x 2 DVD driver.
  I was able to burn data on DVD - R 1 x to 4 x previously. Can you please tell me where to find this firmware and it'll help.

  Thanks & best regards.

  Hello

  I found an info that the M30 - 901 drive can write DVD - R 1 x. If you use burning software Nero, there you will find a small tool called Nero drive speed. With this tool you can find what burning speed can be used to burn CDs or DVDs.

  Good bye

• What external DVD burner would work with Toshiba LX830?

  Try connecting an external DVD burner for Toshiba LX830 via USB.
  Nothing won't work - I've tried 3 writers and different software.

  Is it important that all writers are USB 2.0 and the 830 is USB 3.0?
  The best I have is 3%, then it's just sitting there.

  Can anyone recommend an external recorder that will work with the 830?

  Hello

  Have you tried to connect this external hard drive to CD/DVD to all available USB ports?

  As far as I know the Toshiba LX830 all in a computer supports 6 USB ports and two USB ports support high-speed USB 3.0 standard.

  So, even if the external USB ODD (optical disc) would not support USB 3.0, it should work in 4 other ports USB 2.0

• 5200 801 with DTS-6012 DVD burn DVDs!

  Since I first bought 5200-801, I had problems burning CDs and DVDs. write speed would never go to 2 x as it should be, and - more important-record would be interrupted by an error.

  I downloaded the update of the firmware (SDR6012-1334. (EXE) that has been posted for this problem (interruption).

  Since then, I usually have to burn the DVD 2 or 3 until I get a readable. The operation appears successful, but the dvd is not burned!

  I noticed that the contrast between burned and unburned area is higher on copies of the work of those who does not work on the recorded surface. Looks like the laser is not strong enough!

  I buy a box with 10 DVD to write 5!

  Any help will be much appreciated.

  Thank you
  Yiannis

  P.S. I have responded to something else first to activate the 'POST' icon I think the moderators should check.

  Hello

  What CD/DVD writing program you use? Has this problem occure with other CD/DVD writing programs also?

  Where did you download the update of the firmware?

  To bye chris

• Carpet * a UJ831S burning speed has dropped sharply to 2 x!

  What can I do? I tried to burn a dvd with Nero and the authorized maximum burning speed was 2 x. I tried with different media and different software, but the problem was there. InfoTool indicates that burn my drive max speed is 2 x. DVD Decrypter says x 16. Sound recording now burn at 2 x. I formatted my drive and reinstalled win XP Pro + SP2 and Nero. The problem is still there. I see that the firmware version is 1.4. I can't find a line no longer updated. Any ideas? I'm pretty desperate...
  Thanks to you all
  Dimitris Meimaris

  Hello

  The speed of combustion depends on different factors.
  Of course, eventually the reader is able to burn some 16 x media but in my opinion, it is not possible to burn with 16 x media.

  You must discern between the + and the media, Rom, R and RW.
  In addition, the various media from different manufacturers also supports different burning speeds. As applications of combustion control the burning speed and detect the optimal speed.

  As you can see the burn speed depends on many factors.

• External good DVD burner need for Satellite A30-203

  Can someone suggest a good external dvd burner for my A30-203
  I think I need to copy the videos of the laptop I think that their storage on the laptop uses a lot of memory.

  Can someone recommend / help please.

  Hello Ken

  It will be interesting to know what is your priority. Do you want ultra-thin DVD burner and take it with you or you want to copy all that at home.

  I ask this question because I used the old Satellite 1900 with external DVD writer. My old Satellite has USB 1.0 only and I bought the optical disc player placed in the external case and hooked up with my Satellite via the firewire port. I was very satisfied and data transfer was excellent. I must also say that desktop DVD burners can run with faster burning speed.

  Your laptop has USB 2.0 ports, and you can use the USB connectivity for external device. If you want to use at home I recommend you to use something like this. I had the same manufacturer. It works perfectly.

• Satellite M40-145 - DVD recording speed

  My DVD - RW is not more 2.4 x burning speed. I tried with several brands of DVD - R / + R, Matsu update * a driver, software to record firmware reinstalled (Nero 6 and 7) but the problem is.
  What should you do?

  Hello

  I found some info on this drive.
  It burn the DVD - R 8 x
  DVD - RW 4 x
  DVD + R 8 x
  DVD + R (DL) 2 x 4
  DVD + RW 4 x
  DVD - RAM 3 x

  You have used either a DVD DL or the software recognizes the DVD as a media double layer.

• Satellite P300 19 p - CD/DVD burning problem

  Hi, I'm new to the forum and I hope somone will be able to help.

  I have DVD burning problems. When I use software engraving the image is usually copied ok and then the burning process starts, which usually lasts only a few moments, then the machine spits out the disc burnt and wasted.

  I usually use Corel DVD Copy 6, but have you tried TOSHIBA and other programs such as NERO. With the help of Corel VideoStudio, it burns discs with a success rate of 90%, but the problem comes when you try to copy my own created disks.

  I tried different types of discs (that is to say + R and - R), and I also tried burning speeds.

  Anbody else suffers from this problem?

  I have managed to find an error code 06077-26 - 2A 040902, made this average anyhting for anyone?

  TEMPRO alerts appear to have provided updates firmware for a number of other DVD players, but not for my machine? Maybe it's due a? All the drivers are up to date.

  Thanks for listening and the anybodies help is more than welcome.

  See you soon.

  In my opinion, you should not think about buying replacements. If you think that the drive does not properly contact service. If necessary the reader will be replaced free of charge.

• Also someone can enlighten please... why some DVDs burn work on local plasma screens in the buildings of the Council?

  Also someone can enlighten please... why some DVDs burn work on local plasma screens in the buildings of the Council?

  Also someone can enlighten please... why some DVDs burn work on local plasma screens in the buildings of the Council?

  ==================================
  Hard to say exactly... but it may be worth trying to use
  another brand of draft DVD and the slower burning speeds.

  Check the support site for your DVD burner... they can
  offer suggestions on the DVD blanks to use.

  Volunteer - MS - MVP - Digital Media Experience J - Notice_This is not tech support_I'm volunteer - Solutions that work for me may not work for you - * proceed at your own risk *.

• LG supermulti dvd burner is not detected by the system.

  I wanted to install ATI RADEON HD 4350 and so I uninstalled the driver Intel (r) GMA. I installed the card on the motherboard and I have installed the driver provided by the manufacturer using their CD and I also did other necessary things. Everything worked perfectly. Then in the driver user interface, I saw two monitors. I selected one of them, without any judgement and turns off the computer. Later, when I put it on I saw there was not on my screen and indicator showed natural signal, which was red. So I uninstalled the card and connect the monitor to the onboard connector cable.

  Sometimes the HDD and LG supermulti dvd burner got detected (both or one of them) and sometimes they were not. When they were done detected the speed and performance of the machine was very poor. Monitor has also not getting detected in Device Manager.Then I managed to uninstall the video adapter driver and is also further things to slove the problem:

  Checking the SATA connections (my HDD is on the SATA1 and LG supermulti dvd burner is SATA 2), checking the other connections, Clearing RTC RAM etc, but nothing gave me a permanent solution.

  Then I did a BIOS update and I did an upgrade to Windows XP SP3, stay inside Windows and I also reinstalled driver Intel (r) GMA (new version).

  Now the problem is the drive is detected but supermulti LG dvd writer is not. But now the monitor is in my device manager and performance is good. Now what should I do to the system so that it could detect LG supermulti dvd burner?

  Two other points are:

  1. when I was using the video card my system was attacked by a Trojan horse, but now it's OK after running a full scan using KIS2011 and take necessary measures.

  2 is powered for the LG supermulti dvd burner because it is to open when I am pressing the button.

  System Specs:

  OS: Win XP SP3 x 32

  MB:Asus P5QPL-AM (it has integrated video card)

  The problem has been resolved by running a scan for hardware changes in Device Manager. I did it before but this time it worked.

• CD/dvd burner writes correctly, but displays the error message ' medium not present-tray closed. - 0X023A01'.

  Hello

  I have a unique problem where my cd/dvd burner burn my data to a recordable cd (not verified with recordable dvd yet) correctly, but after the burning process I get an error message "(devMediumNotPresent_TrayClosed) closing session error (Session: 4 medium not present-tray closed. - 0X023A01'.)"

  I tried roxio and nero, cdburnerxp, but I get this error on the whole. However, the burn is successful. I can open the data burned in my laptop or other computers and use the same drive to burn more data in the other computer. I tired to reduce speed, but it is of no use. I have also reinstalled the drivers but no use at the end I also did a clean uninstall of Roxio-> then installed Nero-> Nero clean uninstall-> then install Cdburnerxp 4.3.2.2140.

  Use the same media brand in my desktop LG cd/dvd combo drive, and things are absolutely perfect.

  Fix Microsoft, it gives the following report: -.

  -------------------------------------------------------

  Problems found status

  Drive is not capable of burning (TSSTcorp DVD +-RW TS - L632H) detected other Solutions
  -----------------------
  Issues checked the status

  Device is not working properly (TSSTcorp DVD +-RW TS - L632H) checked other Solutions

  Filter of device drivers are corrupt (TSSTcorp DVD +-RW TS - L632H) checked other Solutions

  Class filter drivers are corrupt checked other Solutions

  Drive is not assigned one drive letter other verified Solutions

  Drive is disabled (TSSTcorp DVD +-RW TS - L632H) checked other Solutions

  ------------------------------------

  Other details: -.

  Dell Inspiron 1520 laptop | XP Pro | TSSTcorp DVD +-RW TS-L632H | CDBurnerXP 4.3.2.2140

  Please let me know if all of the other details are required. Waiting for a response

  Concerning

  TKS

  Hello

  I got my ODD back to normal. The simple solution was to clean the lens of the drive. I called a Dell technician. He inspected the car and found that the problem was due to an unclean lens. In fact, I have never cleaned the lens since I bought the laptop in February 2008. I used a lens cleaner with 6 brushes Writex.

  I also checked the drive by
  1. create a Live CD: Ubuntu
  2. a burned DVD
  3 burn a different brand CD

  Above all 3 tasks are normally carried out with any error. The player read / written correctly.

  Good bye.