Carpet * a DVD - Ram UJ - 841 S DVD burnning speed

Similar Questions

• Satellite Pro L20 - slow DVD burning speed

  Hi all

  I have a very annoying problem with my optical drive - he writes only CD at 6-8 x and DVD x 2! Nothing more! I have read several forums and it seems I'm not the only one with this problem. Only, it seems that there is no solution for this problem so far. The DVD multi drive is a Matsu * a 841 s UJ and its producer very has no support for this article at all. There is a firmware update available somewhere, I could find, but it only works for Vaio OEM.

  Again, I am only interested to release my drive from his normal abilities and not to unlock any area code or other kind. I just want to work to performance, I bought it, that's all.
  Can anyone help?
  Thanks to you all.

  Hi Cosmin

  You have this problem since the first day? Have you tried using different blank discs? Burning program you use? If you use for example 16 x max CD speed options are listed in the burning application?

• DVD burning speed

  Hello

  I have Inspiron e1505 with Sony dvd Q58A

  I formatted my computer a few weeks ago, and after him, the dvd is not burning with speed more than X 2 with any type of dvd disc

  How can - I to solve?

  
  

• The Qosmio G10 DVD burner replacement

  My DVD burner was unable to get out and must be replaced. It is a UJ - 831S. I bought the same one, but I got an error of CD-ROM at the beginning upward. I tried this new CD-ROM on another laptop (Toshiba Satellite 2800-300) and it worked fine. I think I have a problem with the configuration of my DVD burner (c - select, master...). Do you know if can change the firmware of my DVD writer?
  Thanks in advance,
  Alain

  Greetings Alain,

  Yes, the problem here is the ID of engraver of DVD (CSEL) UJ - 831S. You must have the carpet * a DVD burner connected to the secondary IDE Atapi port as a master flash.
  Probably your G10 is recognizing as an oucederomsurlesecondport IDE IDE slave secondary.
  Unfortunately there is no firmware to change the internal Atapi drive ID.
  You can ask Toshiba for the firmware, but I think that they will not give him to you.
  The best thing is to share the UJ - 831S for the carpet * 831B - UJ part number: P000409790 Qosmio G10 model: PQG10U-00Y00L,.
  Please confirm first if your G10 model.
  When you go to the Exchange, please ask them to first test the DVD player. Better not make mistakes, here.
  All of these discs are Panasonic (mast * one) corporation.

  Good luck
  Francisco

• CARPET * a DVD-RAM UJ - 841S: cannot burn DVD/CD more

  Hey people,

  I have a problem with my DVD/CD drive, I can't burn files more. My CARPET * a DVD-RAM UJ - 841S can always install things of CD and erase DVD/cd but I can't burn more.
  Anyone know how I can fix this problem?

  cordially Egbert

  To me, it seems that the lens of the drive can not calibrate correctly
  The bed or write drive before the middle of the lens is calibrated in the right position.
  If it fails, the drive is not able to manage the CD or the DVD.

  Usually nothing help to wait for disc replacement

  Oh wait maybe a cleaning the lens help
  You can try to clean the lens. You can use a lint cloth

• Question about area with a rug code * a DVD-RAM UJ - 841 S

  Hello!
  I have a Toshiba Satellite with a CARPET * a DVD-RAM UJ - 841S. Someone knows something about the firmware for this? I tried to use dvd43 and VideoLAN, but it does not work properly!

  I guess you do you want to Flash the firmware to remove the region code of the DVD player.
  Am I wrong?
  Don t do it! It risky s.
  If you update the drive with the wrong firmware or is not compatible the drive is not able to read/write to the media; CD and DVD.
  In addition, the use of the incorrect firmware will avoid the reorganization of the training by the BIOS.

• Carpet * a DVD - RAM UJ-811 drive

  Laptop: Satellite A10-S703
  Carpet * a DVD - RAM UJ-811 drive supports 2 x DVD-R burning.

  The minimum speed of blank media DVD-R available on the market is 4 x.

  A warning on the cover of Imation DVD - R 4 x recordable disks says
  "Download the free firmware required to avoid damaging your Player 2 x" the given url is http://www.imation.com/products/dvd_media/dvd_firmware.html

  The links provided under Toshiba / Panasonic are not useful.

  Can someone guide me if I can burn 4 x media on this drive?

  Thanks in advance!

  Hi Ravi,

  If you have the DVD burner that can burn DVD-R with a speed x 2 there is no way to improve the speed of burning at 4 x speed.

  Some firmware updates of aid to enable support for new media and has increased by a few burning questions (results of optimal registration for your reader).

  Good bye

• Carpet * a DVD-RAM UJ-850 s does not read blank media - need new firmware

  Hey I have a laptop Equium only around the age of 4 months.
  Had nothing but problems with the CARPET * A DVD-RAM UJ-850 s ATA Device drive.
  I need to know where I can get the update of the firmware.

  Firmware for it, that she will not read blank media.

  I agree with master... I don't know what kind of problems you have, but if the player doesn't work properly, it must be replaced. The warranty is certainly valid and the nearest authorized can help you with it.

  Maybe you made a mistake. Take your laptop to the nearest service and show them what you mean exactly. Here, we can only speculate what may be your problem.

• Satellite Pro A100 (PSAAC) DVD-RAM UJ - 841S cannot read audio CDs

  Sat Pro (psaac) DVD-RAM UJ - 841S will not read or play the audio CD
  Everything else works fine but put in any audio cd and nowt.
  Help?

  Hello

  As you know, each CD is compatible and supported by each optical drive.
  Can I ask you this and audio CD don t work? These are original audio CD or burn one?
  You should know that many new audio s CDs come with copy protections of different and sometimes it happens that these CD s are not readable.

  But we must first know if need all options are enable. To do this you must enter the properties of the drive and check if the option enable digital CD audio for this CD-ROM device has been activated successfully.

• Tecra A8: Mat * un DVD - Ram UJ - 841 s is not read / burn any disc

  Hi all

  I have a laptop Tecra A8 with Mat * un DVD - Ram UJ - 841 s. This device is not read / burn any disc. However, Mat * one bed the recovery CD at startup.

  I tried everything: I deleted the registry entries (lower and upper), I uninstalled Ant again once the driver installed... but it doesn't work. Any help?

  Best regards

  Ribera.

  Hello

  In addition to the fact that you can boot from the Toshiba Recovery CD, I think that it s a problem of training material
  I think it's a matter of calibration of lens readers possibly the lens can not calibrate correctly in the right position of s, and this is why the drive can't handle the inserted media.

  This could be the worst case, because this fault is repairable by replacing the drive.

• carpet * a dvd - ram uj-820 s

  My satellite a60 don't overlay the carpet * a dvd - ram uj-820 s at all. The system said that it does not, or he says he broke. But I don't know that it is not broken. What should I do?

  Hi Justus,

  Check in the Device Manager to see if your DVD-RAM is displayed. If it is you can try the troubleshooting for her option.

  You can also try to remove the device and then re - start, in this way, the system should see the drive and reinstall.

  HTH

• Problem with Mat * a DVD - RAM UJ - 841S Satellite M70-165

  Hello

  I have a Satellite M70-165 equipped of a DVD unit MAST * a DVD-RAM UJ - 841S (5.1.2535.0 driver version).
  After years of 1 and a half with no problems, a few days ago, I restore the operating system (Windows XP Home) through the Toshiba restart DVD.

  Then the CD/DVD unit can read the DVD-audio, CD, or movie, but when I open a DVD (DVD software) data it is said that "it is not possible to access the D:\". ». and some time "poblem whith I/O device. and the same problem that I have with some new cd (which were not burn)
  I have'nt try every thing. I come here to ask the question.

  Sorry for my bad English

  THX

  You can do the following: go to download drivers of Toshiba Europe site and check if there is an update of firmware for this specific player. If so, I strongly recommend you apply and check if it works.

  If the didn t of the firmware update worked later you assumed that the reader is defective and must be replaced.

  Welcome them

• Carpet * a DVD-RAM UJ-811 can't be used with some DVD-R

  I have a laptop Toshiba Satellite P10 554 with XP SP2 and a carpet * a DVD-RAM UJ-811. The problem is that a lot of DVD - R (or DVD - RW) discs cannot be used for burning. If I try such a DVD with Nero a get the error message "disc not initialize - disc may default. Other DVD - r work on my computer.

  It's an update of the firmware of my DVD player. I currently use the H100 firmware version. Unfortionately I do not found any update of Web site (tried toshiba, mast * a, panasonic,...)

  Anyone have an idea how to solve the problem? Is perhaps firmware version top data? How do a get a new firmware?

  Hi haerti,

  I can't find a more recent firmware, too! In my opinion, you should try some different DVD - R from other providers! If this does not resolve the problem then I think you should contact Toshiba Service partner for the NB of a short health check!

  Https://eu.computers.toshiba-europe.com then support & downloads and find an authorized service partner you fid the closest!

  Bye and happy new year!

  Sam

• Need firmware for Mat * a DVD - RAM UJ - 841S to make the region free

  Can someone help me as where to find a Firmware for Mat * a DVD - RAM UJ - 841-S, the,(MTFOPD-01170000-UN.exe) one i found is for another laptop.

  I need to be able to watch the region 1 and 2 because of me travel and the number of these two that I own.
  I have three options.
  1. install a new drive.
  2 use an external hard drive
  Firmware 3.

  The latest is the one I prefer.
  Can someone help me.

  Hello

  Sorry, but the firmware update will not remove the DVD region lock.
  The fact is that you can change 5 times this option, then the option is locked and it of not possible to change it.
  Unfortunately, there is nothing to see!

  If you wish, you can consult this announcement:
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=10828

• Carpet * a DVD-RAM UJ-820 s does not recognize blank DVDs

  My laptop recently stopped recognizing blank, or I burned when I put them in the DVD player.
  The drive is a CARPET * a DVD-RAM UJ-820 s and it was working fine until last week when I tried to use the ASHAMPOO Burning software.

  He does not even recognize any MOVIE DVD I put in the drive, but it doesn't seem to have a problem with a music CD, I tried.

  Someone to help they could offer cause I'm running out of space and I really want to delete my files.

  Thank you

  Hello

  It looks a bit like a malfunction of the equipment. Maybe the lens of the drive can not calibrate correctly.

  Another clue;
  Have you tried to delete the upper and lower filter registry entries?
  Try it. Sometimes such procedure can simply bring the reader to life.

  The detailed procedure and description has been published here in the article Microsoft Knowledge base:
  http://support.Microsoft.com/kb/314060/en-us/

  Good luck