DVD CASE INSERTS

Similar Questions

• Series A satellite with Vista stopped sees any DVD/CD inserted

  My Toshiba with Windows Vista laptop suddenly stopped see that no matter what DVD/CD inserted, and Device Manager all the time gives the message that the software may not be installed correctly due to the error in the configuration.

  I updated Windows and tried to download the new driver from Internet, but nothing works.

  The Device Manager has a yellow opposite sign MAST * A DVD-RAM (that's the name of the device) and external equipment DVD I tried to use. Don't know what to do.

  Did you get any description of error code? For error example code 39 or something like that? Thank you for posting more information, it might be useful.

  However, I found this thread very similar-themed:
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=21588&MessageID=79501

  Check this solution maybe you proposal helps

  good luck and let me know if it helps or not

• drive CD shows autoplay, autoplay shows cd drive, but does not open automatically when the cd or dvd is inserted

  drive CD shows autoplay, but does not open automatically when the cd or dvd is inserted

  original title: Watch autoplay cd player

  OK, got cha.
  Try this:

  http://Windows.Microsoft.com/en-us/Windows-Vista/Change-AutoPlay-settings
  b Eddie

• My laptop (Windows 7) doesn't recognize CD or DVD when inserted in the drive.

  Original title: CDs? DVD not recognized

  My laptop (Windows 7) doesn't recognize CD or DVD when inserted in the drive.  No error message does nothing! ???

  Sorry my bad https://support.microsoft.com/en-gb/mats/cd_dvd_drive_problems/en-us , Ric (I've corrected the link as well)

• CD - RW drive will play CD but not dvd "Please insert disk".

  drive CD - rw will play CD but not dvd it says: "Please insert the disk".

  It would be like a CD player is designed to play CD to play a DVD, you need get a DVD player.

  DVD players can read DVD and CD, but CD players cannot read CD

• Windows Media Player is not responding when a DVD is inserted in the drive of the computer

  Windows Media Player is set as default program for reading DVD but when I insert a movie on the disc, the drive does not open.  I am also unable to open the DVD of the first Media Player opening.  When I play some older DVD, the player actually open and operate.  I guess I must miss some codecs or something but don't know where to find them or how to install them.

  Yes, you need codecs.

  http://Shark007.NET/Win7codecs.html

• Open with the menu that is displayed when a CD or DVD is inserted

  I asked earilier display 'open with' and I can say that I didn't have that Word very well.  I am speaking not open a document, but rather the selection screen that appears when you put in a CD or DVD disc.  I want to reset everything so the window will appear instead of automatically opening with a program that has already been used and I can have clicked on the box at the bottom right that says always open with this program.  I have a screen earlier that allowed me to change all file types (video, audio, mixed technique, etc), but can't remember how I got there.

  Adjust the CD-ROM AutoPlay

  Click the CD-ROM drive in Explorer Windows (or my computer), and then select Properties.
  Select the AutoPlay tab.

  TaurArian [MVP] 2005-2010 - Update Services

• (Redirected) The laptop N4110 watch DVDs when inserted DVD player "cd dvd and driver recovery."

  Hello

  I have the dell N4110 laptop... It is updated to the window 10 are a few days... last night while dong some work my screen turns off... then I tried to restart my stem, but several attempts failed... then I try to recovery via recovery dvd but my system does not detect not them... After several unsuccessful attempts, I tried to start the system via the external dvd drive did not work again to USB key bootable recovery dvd... without success... Finally, I tried to install 7 for Windows prof... It is installed as a charge... now when I put my cd dvd driver recovery in the dvd player... He blank SIAS dvd... do not know what the problem is. Although dvd player reads other CDs and DVDs... Someone please help me go back to my original home premium Windows 7...

  Thanks in advance

  Hi alokgzp,

  Please repost this in the software and the operating system, Windows 10 forum help.

• I got updates for windows vista, but now my microsoft Word 2007 does not work. It ask for a product key and I put one of the dvd case, but he said that is not correct, I use program can someone help with this problem.

  product key no longer works on my office 2007 business what could be the problem?

  Hi Cincmj,

  Welcome to the Microsoft Answers Community Forum site!

  The question you have posted is related to Microsoft Word and would be better suited to the community of the Office Applications.

  Please visit the link below to find a community that will support what ask you:
  Discussions in Desktop Applications
  http://www.microsoft.com/office/community/en-us/FlyoutOverview.mspx , that allows to solve your problem!

  I hope this helps!

  Thank you best regards &,.
  Calogero - Microsoft technical support.
  Visit our Microsoft answers feedback Forum
  http://social.answers.Microsoft.com/forums/en-us/answersfeedback/threads/ and tell us what you think

• Commercial DVDs do not play on MacBook Pro.  "Not allowed" and "Supported disc not available" is displayed.  DVD plays normally when inserted in a different drive.

  MacBook Pro (15 inch, early 2011) / 2 GHz Intel Core i7 / 8 GB 1333 MHz DDR3 / OS X El Capitan Version 10.11.6

  DVD Player Version 5500.66 / Build 5,560 (2)

  When commercial DVD (NTSC) inserted in the MacBook Pro DVD Player error messages "forbidden" and "Supported disc not available" are displayed when I tried to play the DVD.  When the DVD was removed from the MacBook Pro and inserted into a different DVD player, it works normally, then the DVD was apparently not the problem.

  Your help is appreciated...

  Delete ' ~ / Library/Preferences/com.apple.DVDPlayer.plist ' and a DVD player or reopen could solve the problem.

• Create recovery media requests double layer DVD

  Good evening everyone.

  I just took delivery of my 5 new books for new employees of my company.

  3 of these notebooks are HP Probook 450 G2 (REF: J4R69EA)

  (These are the models with 128 GB SSD drives)

  The other two are Lenovo E540 with similar specs.

  So let's start, create recovery media. To ensure that is done before I give them to end users in question.

  While trying to create the windows disk, the program "HP Recovery Disc Creator" requires the double layer DVD: "Please insert a DVD double layer to move forward."

  The DVD in question that I use are discs of "Sony DVD + R 120 min / 4.7 GB" that in the past have always worked. (and now work for Lenovo laptops)

  Searching this forum told me to:

  http://support.HP.com/us-en/document/c03481733

  Unfortunately, this is not the same interface I. I choose only a drive to create a backup to

  (in this case, it is drive F:\ internal drive)

  I also tried an external DVD burner with the same results.

  I have not tried a USB, but this isn't what I want, and since you can create a backup set.

  Link to a screenshot: (you must copy paste in your browser apparently)

  http://loxsvc.netau.NET/HP/HP%20Discss.PNG

  It would be not that big of a problem if there was a real windows 7 key printed on the laptop.

  If I had a key, I would just reinstall the machine immediately with an image clean windows 7 so I don't have to clean up all of the HP software.

  but unfortunately this is not the case. So I need a Windows 7 recovery disk must be created.

  Any suggestions apart from the purchase of DVD DL?

  Thank you for your time

  -Sven signed

  Hey @SCamm,

  To get your question more exposure I suggest you post in the trade forums since it is a commercial product. You can do it at Business Forum.

  Record double layer DVD-R and DVD + R discs can store much more data. DVD + R DL, also called DVD + R9 are what is needed to create the media recovery on this laptop.  Sorry to say.

  Thank you.

• CD/DVD drives not working only not on the two PC running Vista, heeeeeelp!

  Hi guys, two PCs, which is new, both running Vista decided that the installed CD/DVD readers shouldn't work!

  The new PC reads a CD/DVD when inserted (lamps flash to recognize this is something), then nothing (Autoplay is configured to use iTunes ) so I'm going to, click on 'Computer' on the disc, and he says "insert a disc into the DVD drive (f) "

  So, I installed the MS auto fix jobbie and it says ' insert readable media...» "I've had (several store bought CD and DVD all failed to save) then I tried to search the upper and lower filter using regedit, but there is no file with this name in the folder on the drive.

  Device Manager indicates that drivers are up to date, and the device does not work, even though I have many distinguishing!

  Apparently, it is specific to Vista, but suggested courses of action left me with an even worse urge to kick the bloody things around the House that I had when I tried to play the CD in the first place, any help from you lovely people would be most appreciated. Thank you, James :)

  Hello

  If you have too many programs loading CD/DVD they can collide with each other as they
  competition for resources. These will be workload often pieces of themselves in memory at startup
  so it will have an effect, even if not to use. If you have installed some of these
  lately trying to uninstall it to see if it has an impact.

  --------------------------------------------------------------------------------------------------------

  This troubleshooting help:

  Step 1: Please do all the same underneath if you did some before as is often total
  a process that solves the problem.

  Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
  Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
  RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
  below.
  
  Then, work your way through these - don't forget the drive might be bad, could be a coward
  cable or slight corrosion on the contacts (usually for a laptop) and other issues.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  Try this fix manually if the Fixit 314060 does not work
  http://www.pchell.com/hardware/cd_drive_error_code_39.shtml

  Your CD or DVD drive is missing or is not recognized by Windows or other programs-
  a Mr Fixit
  http://support.Microsoft.com/kb/982116

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
  for Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error in Windows
  Vista installation after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
  ends. Remove and replace, do not just tight. For laptops, you can often clean power and
  contacts data with a pencil eraser.

  Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
  manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

  ===============================

  Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD
  Burn and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
  do it right.

  Did you follow the Troubleshooting Guide for the reader who still does not work? There are
  the entries in registry that the troubleshooter does not solve and those who "might" be the cause.

  Check with your Maker system and a device for the two possible firmware updates and
  the correct registry entries for your car.

  Here are the keys that I of course are those in question - for the subkeys of the CD/DVD drive
  as there will be other subkeys in these keys. Do not forget to ask specific keys involved as well as
  the parameters.

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  -----------------------------------------------------------------------

  You can probably find more info here and maybe even the exact registry for your CD/DVD settings
  drive from someone with the same model.

  Forums - a lot of expert real help
  http://Club.myce.com/

  CD/DVD units
  http://www.myce.com/storage/

  Use DevManView to locate the CD/DVD in the registry (be careful and do a prior Restore Point)
  nothing change) - find the DevManView device and then make a right click on it free in RegEdit.

  DevManView - free - an alternative to the standard Windows Device Manager, which displays all the
  devices and their properties in flat table, instead of the tree viewer
  http://www.NirSoft.NET/utils/device_manager_view.html

  I hope this helps.

  Rob Brown - Microsoft MVP - Windows Expert - consumer: bike - Mark Twain said it right.

• DVD drive no longer works and disappears from MS explore

  New "TSSTcorp CDDVDW SH-S223C ATA Device" Samsung dvd player is visible in Windows Explorer after starting the machine.  He can see an audio CD.  However, when a DVD is inserted it reads very slowly, then stops and the drive is no longer visible in Windows Explorer.

  I updated the firmware with a utility Samsung called Firmware Samsung ODD liveupdate, but this made no difference.

  Hello

  For a new disk that should really be fixed/replaced under warranty.

  You have disk problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD burning and)
  Playback of CD and DVD). So it is not unusual for parts from 1 or 2 to not work so that others do
  correctly.

  --------------------------------------------------------------------------------------------------------

  You can try these but it seems that the drive has a hardware problem.

  Step 1: Please do all the same underneath if you did some before as is often total
  a process that solves the problem.

  Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
  Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
  RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
  below.
  
  Then, work your way through these - don't forget the drive might be bad, could be a coward
  cable or slight corrosion on the contacts (usually for a laptop) and other issues.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  Try this fix manually if the Fixit 314060 does not work
  http://www.pchell.com/hardware/cd_drive_error_code_39.shtml

  Your CD or DVD drive is missing or is not recognized by Windows or other programs-
  a Mr Fixit
  http://support.Microsoft.com/kb/982116

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
  for Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error in Windows
  Vista installation after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
  ends. Remove and replace, do not just tight. For laptops, you can often clean power and
  contacts data with a pencil eraser.

  Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
  manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

  ===============================

  Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD
  Burn and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
  do it right.

  Did you follow the Troubleshooting Guide for the reader who still does not work? There are
  the entries in registry that the troubleshooter does not solve and those who "might" be the cause.

  Check with your Maker system and a device for the two possible firmware updates and
  the correct registry entries for your car.

  Here are the keys that I of course are those in question - for the subkeys of the CD/DVD drive
  as there will be other subkeys in these keys. Do not forget to ask specific keys involved as well as
  the parameters.

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  -----------------------------------------------------------------------

  You can probably find more info here and maybe even the exact registry for your CD/DVD settings
  drive from someone with the same model.

  Forums - a lot of expert real help
  http://Club.myce.com/

  CD/DVD units
  http://www.myce.com/storage/

  Use DevManView to locate the CD/DVD in the registry (be careful and do a prior Restore Point)
  nothing change) - find the DevManView device and then make a right click on it free in RegEdit.

  DevManView - free - an alternative to the standard Windows Device Manager, which displays all the
  devices and their properties in flat table, instead of the tree viewer
  http://www.NirSoft.NET/utils/device_manager_view.html

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• DVD drive not recognizing not no DVD after burning

  My DVD is ATAPI DVD A DH16AYH

  The problem is that the drive(DVD-RW) mentioned above bed and writes CDs no problem, but when it comes to DVD, I can write a DVD with ASHAMPOO BURNING STUDIO, but once completed burn will check not the written DVD and the drive doesn't recognize not after repeatedly re - insert the DVD in the drive. He does not have any other DVD until I restart the system. But then again it does not recognize the written DVD. When a DVD is inserted, windows Explorer does not any file in the drive and the drive never ends the reading of a quantity of time hude and makes noise while trying to read.

  I also checked the Manager of design errors contained in the disc, but he says it's working properly.

  I couldn't find an updated firmware for the drive in hp.com and any link for him would be a good thing. Help, please

  Thanks a lot for the gentleman to the answer. The link to the firmware that you sent me is for windows vista and mine is windows XP. I'm really sorry that I did not mention it before, my bad sorry. In any case thanks for the effort. But I think I solved the problem myself. I just uninstalled diving in the Manager of currency and restarted the system and voila! the * bleep * thing actually worked. I stopped using Ashampoo Burning Studio, instead I use Nero and there are no hazzle so far yet and it does not give me the noise as before.

  Anyway thanks again.

• Why does CS3 ask a DVD when it has been downloaded?

  For some strange reason, CS3 claims that I have to reinstall. So, I downloaded the installers of the store. The ReadMe file simply double-click on setup.exe and follow the instructions. The first thing it does is to ask the DVD is inserted. How is this possible when the application has been downloaded? Is what kind of logic this? How can I get the installer of re - install the products I paid?

  I am very dissatisfied with adobe right now.

  You do not uninstall the original version and there may be a few references to a DVD of installed base stored somewhere. The installation of the so-called repair does not, in any case. Uninstall everything first, then reinstall it. You may also manually remove the caps.db in C:\Program Files (x 86) \common fiels\Adobe\caps. Note that due to a bug in CS3, you need to run twice, what is uninstall, remove the ccaps.db, reinstall, uninstall again without remove the caps.db and then reinstall a 2nd time or well you can see mistakes a license.

  Mylenium