DVD/CDR is no longer visible in Windows 7 and unusable

Similar Questions

• my product key is no longer visible to windows 7 and I need!

  I have installed the preview of windows 8 and want to go back to my previous version which is windows 7 and it has been already installed I don't have a cd for it and the product key is not visible on the bottom of my laptop.

  Is the brand of my laptop: Hp Compaq Presario CQ62

  My software is: Windows 7 (64-bit) Home Premium edition, but for now is Windows 8 Preview of consumer

  Just download free generic ISO of Windows 7 64 bit Home Premium & install & update drivers according to the needs of HP driver support downloads then visit this thread to solve the activation.

  2 benefits:

  1 > no fees & no waiting for recovery media

  2 > cleaner, faster more up-to-date install, much better than the installation of bloated HP & next to the installation of recovery default needless waste of hard drive space...

• Satellite P100-347 - DVD player is no longer visible in Windows XP MCE

  Hello. My DVD players seems to have disappeared from within Windows MCE running on my P100-347. BIOS can see it, it opens and closes without any problems and the light comes on as if the disc is read, but it is not considered by Windows as a disc.

  I installed the DVD - RAM drivers on the Toshiba site, but this did not a bit of difference. Any suggestions?

  Hello

  Have you checked STRANGE State in the Device Manager?
  Some yellow exclamation points appear in Device Manager?
  Could you please give some info on the error message?

  I found this useful Microsoft Knowledge base article:
  http://support.Microsoft.com/kb/314060/en-us/

  Maybe it helps.

• My CD rom is no longer visible in windows Explorer in my computer.

  Could someone please help with the following query.

  My CD rom is no longer visible in windows Explorer in my computer. I tried to go to new hardware in the control panel and couldn't find it.

  I ran the diags toshiba and considers that it is and says its fine.

  Any advice on the resolution of this problem would be highly appreciated.

  Thank you B

  Hello

  You must remove the upper and lower registry key filters.
  First remove the CD/DVD drive device manager.

  Then go to the registry and remove the filter top and bottom of this key:

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Contro l\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  After this reboot of the laptop.

  For more information, check this:
  http://support.Microsoft.com/kb/270008/en-us

• Since the update Windows 10, my CS5 Photoshop created jpg are no longer visible in Windows Explorer (File Manager)

  Since the update Windows 10, my CS5 Photoshop created jpg are no longer visible in Windows Explorer (File Manager).  I have reset Photoshop like application default for jpg files, rebooted.  Nothing has changed.  The ideas people?

  Hi R_Kelly,

  Hidden folder/file settings was the first place, I checked and kept checking each new reboot.

  I have copied below my temporary solution I posted in another forum thread.

  See point 7.  I found a way to make it visible again.

  1. I can see all jpg files created before Win10 update AND all the jpgs created by other programs, other than Photoshops after Win 10 update.

  2 Photoshop cannot see the newly created Photoshop created jpg files in the file picker at all since Upgrade to Win 10.  I've never had a problem of invisibility of file before winning 10 update.  My hidden files were always checked to be visible.  However, Photoshop can open if listed files in a basic text file search in Windows Explorer in the path of the file "recently used".

  3. the files are not visible or clickable at all in Windows Explorer tree or the Photoshop file selector. They become open and visible when listed in a basic text file search in Windows Explorer in the path of the file "recently used".

  4 Microsoft Office applications can't see the new Photoshop created Jpg files in file, only pre Win 10 update pickers jpg created by other applications and versions.

  5. the problem occurs only with Photoshop jpg created after the Win 10 update.

  6. I checked the settings "Show hidden files, folders and files of the operating system", and they remain as they were, which allows all the hidden to visible objects.  I kept the visibility settings files in this way since the early 1990s.

  Temporary fix below *.

  7. I did yet another simple search of the text Windows Explorer, he finds invisible jpg files less all links 'recently used' who were there yesterday (2nd day after I created the files), I checked the location of file properties file and it entered the original file I saved their.  Using a right-click of the mouse on the file to bring up the menu actions and file properties, I was able to copy and then paste the file into another directory.  I jumped on the directories to see if it remains visible and he (Yes). The new copy is now visible to the pickers of file in Photoshop and Microsoft Office applications.

  LizzyD

• Hard drive is no longer visible to windows 7 ultimate x 64

  Hi all
  I'm a MSDN. I have a number of virtual machines that I work on.

  Last night, I had two running virtual machines and failure at the same time.  They go on my F drive.

  Restarting the PC drive F is not visible to windows. I'm guessing that there is some sort of failure on the drive.

  I was looking around and found advice like going to disk management and rescan etc. No luck so far.

  I tried to switch the machine on in the BIOS, but in the bios ASUS, I do not see the mentioned drives.

  Can someone point me to a good article on how to diagnose the drive suddenly disappear like that with a failure suspected of some sort?

  This must happen a lot. I'm surprised that I wasn't able to find a good article detailed on google.

  I hope it isn't a catastrophic disk failure.

  Please accept my thanks in advance for any help you can be in this case.

  Best regards

  Peter

  Hi Peter,.

  The problem you are having is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the IT Pro TechNet public.
  Please post your question in the TechNet Forum.

  You can follow this link to ask your question:

  https://social.technet.Microsoft.com/forums/Windows/en-us/home?category=w7itpro

  For any other corresponding Windows help, do not hesitate to contact us and we will be happy to help you.

• CD/DVD drive, it is not supported by Windows XP and Bios

  I bought a new Mat * un Panasonic cd/dvd player.
  It only works on Windows 2000, it is not supported by Windows XP and Bios, so I can't start with.

  Could you please provide some information about yourself (name) for laptop?
  Did you buy this player or that player supplied with the notebook?

  If the player is not berecognised by the BIOS, then in my opinion, the drive supports bad master / slave / parameters c - salt.
  You should know that not all drives are compatible.

  Cannot change settings as the dose of disc supports not no rider, but only the firmware.

• DVD RW is no longer available in Windows 8

  1. I have a dual boot Linux and Windows 8 both on a separate HARD disk.

  2. when I installed first Win8 my Optiarc DVD +/-RW ND-3570 worked perfectly on an operating system.

  3. after a recent upgrade of the DVD Win8 no longer appears on this PC.

  4. the DVD still works when a cock inserted but then stops without disk access.

  5. I studied a lot of previous similar problems on this forum and tried without success.

  6. I went to regedit.exe and the following key is the one that is selected. I think it's relevant?

  Key name: HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4d36e965-e325-11ce-bfc1-08002be10318}
  Name of the class:
  Last write time: 2015-01-26 - 12:38
  A value of 0
  Name: class
  Type: REG_SZ
  Data: CDROM

  Value 1
  Name: ClassDesc
  Type: REG_SZ
  Data: @%SystemRoot%\System32\StorProp.dll,-17001

  Value 2
  Name: EnumPropPages32
  Type: REG_SZ
  Data: c:\windows\system32\storprop.dll, DvdPropPageProvider

  Value 3
  Name: NoInstallClass
  Type: REG_SZ
  Data: 1

  Value 4
  Name: silent installation
  Type: REG_SZ
  Data: 1

  Value 5
  Name: IconPath
  Type: REG_MULTI_SZ
  Data: %SystemRoot%\System32\imageres.dll,-30

  Value 6
  Name: LastDeleteDate
  Type: REG_BINARY
  Data:
  00000000 3f ca da 50 f7 05 01 d0 -? EUP÷. D.

  7. when I try to access the properties access is denied.

  8. it MUST be a simple answer to this - can any MVP give me a solution please?

  Hello

  Try this... You are missing a file... There should be a "0000" folder, '"0001" or even "0002" listed above properties... ".

  1. run cmd as administrator (right click left lower corner when Start appears)

  2. type: or copy / paste

  Reg.exe add "HKLM\System\CurrentControlSet\Services\atapi\Controller0" / f/v EnumDevice1 /t REG_DWORD /d 0x00000001

  3. press enter

• Firefox is no longer this morning: Windows Vista and Windows 7.

  The exact scenario of the problem seems to depend on the web page being opened and perhaps the operating system. On Windows 7, it is in a default configuration of Firefox with no Add-ons and am trying to load my homepage, which is just a collection of URLS. I wrote it myself, and it's strictly classic HTML - no Java or something else. Here, I get the web page "(untitled)" when he tries to load the home page, then the same behavior when I try to load anything else.

  Under Vista, my home page is the page of my email provider and I use Noscript with everything on the home page enabled. However, it resembles how a page appears if Java is only partially active by Noscript. It is not the way this particular page seems if Java is not enabled, so this isn't the problem. The error in the log for this page is below. Here, I can partially charge to a large number of pages, generating different errors depending on what page, I'm trying to load.

  These machines are running Secunia so he reported everything to day when I scanned yesterday. I am running Mozilla 3.6.6 both places and or ID has administrator privileges - I'm afraid to try Firefox on my administrator ID.

  I think it started after that Norton Internet Security had me restart due to an unidentified security problem, but Firefox is the only thing that seems to be affected. I had to switch to Internet Explorer to write it, or get something else does.

  This has happened

  Each time Firefox opened

  Is after that Norton Internet Security had me restart because of security problem

  After working a bit on a XP machine, I discovered that uninstall / reinstall erased the problem on all machines. I guess something must have been corrupted.

• Dehaze slider is visible but greyed out and unusable

  I have Lightroom CC (ver. 2015.1.1).

  In the module development, under attributes, the Dehaze cursor is not active.  It does not matter whether the image is jpg or raw. The cursor is visible in the effects section but is grayed out and is not usable.  Does anyone know how to activate the cursor Dehaze?

  Hi ifr2vfr

  What version of process are these images on?

  Dehaze filter only works with 2012 (ongoing). You find in the Calibration section of the camera in the develop module.

  Try to update the files of the (current) process of 2012.

  

  Let us know if this helps

  ~ Assani

• HP 1270 DVD optical drive does not work on Windows 8

  Original title: Windows 8 and optical drive HP DVD 1270

  Hello

  I waited a few months and tried all means to get my HP DVD 1270 (Sata) optical drive works on Windows 8 and can not.

  I tried different suggestions from members of this forum, but NOTHING.

  If I re - install Win8 it will 'see' the drive for 24 hours, then disappear and not be reviewed.

  The same drive is always available in XP Pro, Vista Ultimate, and Win7.

  I hope that the long-awaited service pack will address this problem because it's a matter of Windows 8, which must resolve.

  Deric

  Try to go to: http://www8.hp.com/us/en/support-drivers.html . Enter the computer information they request and download and install the necessary drivers/software for windows 8. Hope this helps and if you need any additional aid station and we will be happy to help you.

  The above opinion is mine and mine nothing and does not necessarily reflect that of Microsoft, it's employees, or any other Member of this forum.

  "When we try to take anything by itself, we find it hitched to everything else in the universe." -John Muir

• Contacts lost in Windows Fax and Scan

  I have a file of contacts, but it is not visible in Windows Fax and Scan. How to bind Windows fax and Scan of my contacts?

  What program your contacts take place in?  Contacts Windows is the default fax and scan value if Outlook is installed on the machine.  With Outlook installed, it becomes the default fax and scan uses Contacts application and some settings in Outlook can prevent his Contacts to appear.

  HAL
  --
  HAL Hostetler, TCE
  Engineer senior/UPDATED--MS MVP-Print/Imaging - WA7BGX
  www.kvoa.com - KVOA television, Tucson, AZ.
  Live Hot Licks - www.badnewsbluesband.com

• Obtain printer drivers for Windows 7 and 8

  If you have a new Windows 8 PC and you want to connect it to your printer, you may need to install a print driver. You may also need to install a printer driver if you just got a new printer.

  While many drivers are integrated in the Windows operating system, you may obtain the latest printer driver for the printer works correctly with your version of Windows.

  HP makes it easy to find and install the correct driver with the printer Installation Wizard. Printer Installation Wizard works in Windows 7 and Windows 8. Printer Installation Wizard works by downloading and installing the newest and most appropriate HP software available for your HP printer. All you have to do is download the tool, run it and follow the instructions on the screen. For the tool, go here: HP printer install wizard for Windows.

  NOTES

  HP printer Installation Wizard will install a driver of long for your Windows 7 and Windows 8 active product (s). If a long driver is not available, the wizard will direct you to the site HP.com support for the alternative driver options and instructions.

  Remember that HP printer Installation Wizard does not support the version of Windows 8 RT for computers or the ARM-based tablets. Installation of additional printing software is not required on that version and HP recommends users use printing features that are already included in Windows 8 RT.

  If anyone has questions about HP printer Installation Wizard, leave a message below.

• G5210it: hp dvd - ram gh60l not visible in windows 10

  Hello

  problem: dvd unit does not; It is not visible in computing resources

  This happens after the update from windows 7 to windows 10

  -the dvd is in the BIOS: described as hp dvd - ram gh60l

  -It is provided: it opens and closes correctly using its button

  -It is not visible in the resources of the computer

  -It is not visible in the list of devices, even if I show hidden devices (devmgr_show_nonpresent_devices = 1)

  -J' downloaded and installed the HP driver, even if it's for windows 7

  http://h20564.www2.HP.com/hpsc/SWD/public/detail?swItemId=vc_100477_2&swEnvOid=4054

  -J' checked the 4D36E965-E325-11CE-BFC1-08002BE10318 low register - and upperfilter: never show

  so my questions are:

  can it work with windows 10?

  any clue?

  Thank you

  Hello!

  I had exactly the same problem. For me it worked with "Resolution 5" in support of Microsofts bullentine https://support.microsoft.com/en-us/kb/314060.

• Key to Windows 7 Starter is no longer visible

  Hello

  I recently bought an Acer netbook. On the back of the netbook, there is a sticker Windows 7 Starter with the key. The problem is that part of it is no longer visible and I couldn't guess the part. Is it possible to get it back?

  Thank you.

  You are welcome, please keep us updated with your progress.