DVD RAM

Hello

I have windows 7 and I want to use my DVD Ram drive, my computer doesn't recognize it, so what dvd ram drive can I install? and that's for sure. The installed software to edit, etc. is ok, but I get a message

Failed to update the system registry, "try it please use REGISTRY".

Thank you

Jent

Hello

Update the firmware of the DVD from the Dell site.

What is your system model?

Have a DVD burner or just a reader?

You can try to remove filters from registry, find the link below on the same

Concerning

Tags: Dell Drives

Similar Questions

  • DVD - RAM on Satellite M70 cannot read all CD

    Hello..

    I have satellite M70-215, and I have a problem with the DVD - RAM drive... it's my dvd - ram does not correctly read the CDs... some of them can be read and some of them may not... when I put a CD that leans on another computer, I was 'incorrect function', ' device can not available "errors... or I see an audio CD instead of data cd... but on the other side, some of my CDs work wihtout problems... I did everything (remove driver and install again etc.) to solve the problem but I could not find the answer... This is my second toshiba laptop and now I have the same problem again... What's wrong with this DVD - RAM drive? I hope you can help me because I got bored with that...

    thnx now...

    Ali Mert Türkkan
    Med.Dent.

    The problem could be the driver lens calibration.
    Before the player will read or write to the media of the lens must be calibrated in the right position, but if the drive has been used long-term these problems appear

    Sometimes the lens cleaning helps, but especially the disk needs to be replaced

  • DVD-RAM UJ862AS does not recognize discs-r on Satellite U400

    For some reason any my DVD player wil no longer recognizes discs - R.
    I have a RUG * has DVD-RAM UJ862AS by car.

    Clues?

    Hello

    Try to clean the laser lens with cotton and alcohol tip.
    In my case it worked also try different drive R from different manufacturers. I use the TDK R CDs and DVDs and hand never no trouble.

  • Satellite Pro U200: DVD - RAM cannot read media

    Greetings

    I have a problem with a carpet * a DVD-RAM UJ 8425 in my notebook U200.
    When I insert the CD or DVD in the engine, it cannot read the media.
    The engine starts and runs disc twice or three times, then turn of.

    I have this laptop for 2 months, and only since yesterday, I have this problem.
    In Device Manager it is shown in working order,
    I have change the driver but it's still doesn't work...

    Can you help me to find out where is the problem?

    Hello

    It will be interesting to know does this happen with all sorts of data on the disks. Try checking Autoplay options in the ODD properties.

    By the way: you can see the contents of the disc in Windows Explorer?

  • Portege A600 - need driver for MAST * A DVD-RAM UJ 862AS

    Please, where can I find the driver for:

    CARPET * A DVD-RAM UJ 862AS

    Thank you in advance.

    Sabre - Italy

    Hello

    Why do you ask for it? The drive is not visible?

    I mean that the driver is not required for ODD (optical disc).
    Windows uses the Microsoft own driver who is still part of the Windows System.

    You see a yellow exclamation point in Device Manager?
    I recommend the removal of the STRANGE in Device Manager. Then, you will have access to the registry and should remove the Upperfilters and Lowerfilters completely from the following registry key values:

    HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Contro l\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

    After that, you have to restart the device.

    Check and I think that the STRANGE should reappear.

  • Carpet * a DVD - RAM UJ-811 drive

    Laptop: Satellite A10-S703
    Carpet * a DVD - RAM UJ-811 drive supports 2 x DVD-R burning.

    The minimum speed of blank media DVD-R available on the market is 4 x.

    A warning on the cover of Imation DVD - R 4 x recordable disks says
    "Download the free firmware required to avoid damaging your Player 2 x" the given url is http://www.imation.com/products/dvd_media/dvd_firmware.html

    The links provided under Toshiba / Panasonic are not useful.

    Can someone guide me if I can burn 4 x media on this drive?

    Thanks in advance!

    Hi Ravi,

    If you have the DVD burner that can burn DVD-R with a speed x 2 there is no way to improve the speed of burning at 4 x speed.

    Some firmware updates of aid to enable support for new media and has increased by a few burning questions (results of optimal registration for your reader).

    Good bye

  • Equium A200-1V0: DVD-RAM UJ-850 s does not read data discs

    My laptop seems to have decided to stop reading data disks.
    However, there is no problem with the audio CD, but when I insert a data disc such as the software considers the disk is empty and try to format the drive.
    I searched internet day for solutions and tried without success to the following:

    Removed the UpperFilters and LowerFilters in the registry.
    Uninstalled and reinstalled drivers.
    Bought DriverWhiz (waste of money!)
    Tried to access disc command prompt that generated the message "incorrect function".
    Tried to use the enforcement function and access an exe file that I know is on the disk, but it comes up saying I need to format the drive
    Uninstall service packs
    I even thought it might be something to do with the MagicVirtual drive I had installed so I uninstalled completely which
    I uninstalled real player

    I'm about 3 minutes to destroy my laptop so any help would be appreciated.

    Laptop: Equium A200 - 1V0
    Drive DVD - RW: MAST * a DVD-RAM UJ-850 s ATA
    OS: Windows Vista

    Hello

    Deleting upper and lower filters was the first idea that I'd like to share with you, but it seems that you have already tried this solution proposal

    How about windows boot CD or a linux live CD?
    Is this possible?

    If not then I thing that the question could be linked to the wrong material work I m thinking on the issue of laser lenses eventually the laser lens can not calibrate properly and this could be a problem

    In this case, only a replacement CD/DVD drive can help greet

  • A50 DVD-RAM drive problem

    Hello
    When I try to burn at 8 x DVD-R, Nero says it can burn only at 2 x. It should normally 4 x.
    The drive is Mat * a DVD - RAM UJ - 820 s, FW version 1.0

    I think the update of the firmware should fix it, but I can't find it anywhere.

    Adrian

    Hi Ado,

    Checked other DVD - r writing? There could also be a problem with the middle (time of each manufacturer of DVD writer problem).

    Rudi Bye

  • Carpet * a DVD-RAM UJ-820 s does not work in Satellite M30X 122

    Hello!

    I am owner of a Satellite M30X - 122 Notebook with Mat * one reader CD DVD-RAM UJ-820 s.

    In recent weeks the disc suddenly stops working during normal use, no error message, in Windows XP System Device Manager all entries are ok, the drive is enabled and visible.
    !! Optical media access LED lites permanently, so that the reader is always available!
    I have tried using different CD, reboot Notebook, removing battery State is always the same, LED blinks several times then it lites permanent.
    After a few hours this phenomenon disapperars and I can use the drive without any problems. ! It is very annoying!

    Someone at - it experience with this problem? Please let me know.

    Don't you think that the drive needs to be replaced?
    In this case (I tried a Mat * a DVD - RAM UJ-820 s on the www, I found none just renovated, new readers) does anyone know where to get a new, or a compatible UJ-820 s drive.

    Thanks in advance.
    Have a good evening.

    Hello

    I don't know where you live and can not recommend any PC shop but you can order it by the authorized service partner.

    You can also view s manuals for Satellite M30X, and page 5, you will find a list of all compatible optical disk drives. Do not buy the same but much better if you want. I hope that this info will help you find the new drive.

    Troubleshooting I can't say a lot. Try to remove the device from Device Manager and reboot the device and test again but with original media only. Make sure that you can see the contents of the CD or DVD using Windows Explorer.

    If nothing is done check for replacement.

  • M30X-105 - my DVD-RAM can't see CD - R.

    Hi all

    Yesterday, I bought a Toshiba Satellite M30X 105. Everything is ok, aside from the fact that Mat * a DVD - RAM UJ-820 s refuses to read one of my CD - R is recorded on another machine with Nero 6.6.xx

    Can someone everything I say on what settings can I change to enable DVD-RAM see all CD?

    HI JAI,

    What type of CD writer is in the other machine?

    He is also an older CD burner or a DVD burner?

    Pete Bye

  • Satellite L10: Mat * a DVD - RAM UJ - 831 S - update the driver or firmware

    Hello
    I bought a Toshiba Satellite L10-194 with a carpet * a DVD - RAM UJ-831 S and I'd like to update. My driver version is 5.1.2535.0 Microsoft (07/01/2001). I have a game I want to install it on my laptop but the CD doesn't recognize is not my DVD-RAM and its freezing point. I also want to know the rate of transfer of this DVD-RAM.
    Thank you

    Hello Daoude

    In my opinion, you have a bad driver. You can find the most recent version of the driver from the official website of Toshiba. The version of the driver for windows xp is 3.1.0.0 (last updated 02/03/05).

    Good bye

  • Satellite Pro L510 - computer laptop Toshiba DVD - RAM cannot read disks

    My laptop toshiba Satellite Pro L510 computer may not play all discs as I installed Microsoft Expression Studio 4 by using the original CD... now whenever I insert a disc, the dvd - ram turns the disc for a few seconds and thn stops spinnig.

    Then drive shows that there is nothing inside the disk and it is completely empty.

    I can't even restart my operating system discs cannot be read from the bios either.
    I uninstalled the drive, the updated drivers, but it did not help. Please help me, I really need to use dvd ram... I use windows xp sp2 and using the laptop for 8-9 months...

    Help, please!

    http://www.Microsoft.com/UK/expression/products/StudioUltimate_SysRequirements.aspx
    According to this statement you must have installed Windows XP SP3 home edition.

    Your ad is a bit confusing to me. You have a problem with the functionality of DVD - RAM or optical disc drive cannot read all drives (different CD, DVD, DVD - R formats. DVD + R and so on)?

    I put t know what is the problem with the optical disc drive, but way generally, an installation of software packages has nothing to do with ODD when you use it as first boot device.
    > I can not even restart my operating system discs cannot be read from the BIOS either.
    Restart or reinstall?
    Is a readable recovery DVDs when you try to start the recovery image installation?

  • Satellite pro U200 - change DVD-RAM with a BD - ROM

    Hello, my DVD-RAM has been damaged, and now he does not write data, I wanted to ask if I can change the current DVD - RAM UJ-842 model with one of them:

    1 - Panasonic UJ - 120 Blu - ray BD-ROM/8 x dvda±rw DL notebook IDE Drive (black)
    http://www.geeks.com/details.asp?invtid=BLK-Uj-120-do&cat=DVD

    2 Sony Optiarc BC-5500 has Blu - ray BD-ROM/8 x dvda±rw DL notebook IDE Drive (black)
    http://www.geeks.com/details.asp?invtid=BLK-BC-5500A-do&cat=DVD

    Thanks in advance.

    Hello

    I m not very good if this disk will work in your notebook.
    The fact is that hard drives support different master/slave/c-salt settings and wrong settings lead to error IDE #1.
    The BIOS does not simply recognize the CD/DVD drive.

    Here, in this thread someone has replaced the STRANGE with Blueray and it worked:
    http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?MessageID=139719

    Check it out

  • Tecra M5 - DVD - Ram is not recognized

    Hello

    This is my 1st post, so this is.
    I have a Toshiba Tecra M5 my old drive has just started to slow down, I bought a new drive Tsstcorp SN-S082H/baby.

    When I slot the drive in the Bay is not recognized by the system immediately unless I'm going to add harware and ASNA for new hardware, and then he picks it up,.
    When stop & restart lappy dvd - ram is not recognized by the system, or BIOS, the light on the flange of the discs is on but when I press the button open nothing happens. I installed the latest firmware, I also don't you any driver of indevice error messages sound as if the reader is not installed, but the light on the drive is turned on but does not open.

    Some1 can help me please?

    Model name: SN-S082H/baby
    Code OEM: TS
    F/W ver. SB01

    Follow the instructions posted by Akuma. Maybe this can solve the problem.

    Also, I checked the Tecra M5 user manual. There is a list with compatible DVD players, and your new drive is not listed. Not every drive is compatible with any laptop.
    If it doesn t work get the reader to the merchant computer buy a compatible player that is listed in the user manual:

    TEAC CD-224EN
    TEAC DV-28EN
    CCP UJDA770
    TSST TS-L462C
    Pioneer DVR - K16
    CCP UJ-841

  • Qosmio F10: DVD-RAM UJ 830-S - I can not burn audio CD

    I am not able to burn audio CDs with my laptop F10-130.

    Is it possible to get an update for the DVD-RAM UJ-830 s

    Hello

    If you are able to burn another one to think there is a problem with your burning software I put t know not which you use, but please try to install another (Nero) and check if there is the same problem again.

    I think that you n t need any update of the player if there is some problem with CD audio.

  • Carpet * a DVD-RAM UJ-820 s do not read or burn discs

    Hi, I'm Natalie and I need help with my problem that occurs.

    Operating system:
    Windows XP Home Edition
    Laptop Toshiba Satellite
    Model A75-S229
    Multi recorder drive: CD and DVD

    The problem that happens is that I can not get any CD or DVD to work when I put them. What is happening is he's trying to load but makes the window "Not responding", unless I have the disc, then everything will be fine. What is also involved, is that I can't burn discs at all, at any speed.

    Also, I would add, when I go to my computer > right click on the DVD - RAM drive > properties and under the general tab it states:

    Type: CD player
    file system: unknown

    I don't know if that's the problem...

    Can someone help me?

    HI Isabelle.

    Please check in the Device Manager to see if there is a problem with your optical drive. Normally this will be displayed as an exclamation point against the device.

    The fact that the file system is listed as "unknown" is because the drive could not read the format of the disc so that Windors Explorer cannot identify any file structure.

    Your problem could be something very simple like a lens dirty or a faulty device driver. It is not easy to tell from your description exactly what can be wrong, but I would say you try some of the easy options so try first to clean the lens, and if this does not resolve your problem, then try to remove the drive (Device Manager) and reboot for the device will be installed new.

    If all else fails, you will have checked player be an authorized Service partner.

    Kind regards

Maybe you are looking for