DW6 acting a bit

Similar Questions

• IPhone broken water

  Greetings,

  I found myself in a difficult situation. Any guidance will be greatly appreciated!

  I own an iPhone 6 s more than 64 GB.  I left the United States on his way to Egypt for the military. During a mode ensures the Kuwait, my phone slipped where momentary I put it and it fell into the water. How I managed to drop into the water in a desert, I don't know. I have not either the AppleCare I told myself that I would take care of it...

  I immediately turned it off. Once I found some white rice believed, I placed the phone in a hermetic bag with rice for 3 days. When I turned it on it worked, but the screen has acted a bit strange. In addition, the speaker was no longer working and the front camera was blurry.  A few days later the screen stopped working. I was able to use find my iPhone to remove the content, but the phone to be was broken. In addition, a piece of rice even managed to get stuck into the headphones Jack.

  I'm looking for "warranty" repair tips from Apple to the subject. Currently, the phone is in route back to Denver where my other significant it will bring in an Apple Store. Because I feel that the phone is quite broken, do you think Apple will fix it for the elimination of the cost of repairs guaranteed $ 329? Or do you think it's too far gone?

  Thank you for your time. Any thoughts would be appreciated. Have a wonderful day!

  -Aaron

  Only out of warranty costs for a replacement. Apple does not repair itself, they replace with a service unit. The service unit will be like new and recovers the rest of your guarantee of origin, or 90 days, whichever is longer.

• After auto-update to 38.01 - Firefox barely works.

  I upgraded somehow 38.0 conducting with exactly the same way, now. I huge lag when typing in the search field and incredibly slow page loading. IE works perfectly (well, as perfectly as a link with known current issues in this node - but it's an ISP issue). I tried a totally new facility 38.0 and 38.01 remove every trace of Firefox via the run / % appadata %, everything Firefox-associates of the HD (x 64 Moreover etc.) and I am puzzled. IE load a little slowly, but as stated before, known problem with my connection sometimes. Even using Firefox functions in menu options takes 7 to 10 seconds to appear. A new tab is taking, once again, seconds to open.

  I * was * running Adblock Plus 2.6.9 BetterPrivacy 1.68, EPUBReader 1.5.0.6, Norton Toolbar 2014.7.12.14, NoScript, 2.6.9.22, Self - Destructing Cookies 0.4.7, StumbleUpon 4.19 and Xmarks 4.3.6. Only the Norton Toolbar has been disabled on the auto-update, which I activated. Then I disabled each add-on which did nothing. I tried to reinstall without the complete brainwipe 38.01 first in case I had a file corrupted, but... Well, no change, same with two virgins installs of 38.01, then 38.

  I just ran a complete system scan of Norton - just 33 rejected of IE (ugh). There is not much I can add have acted a bit hastily just wipe everything - but in my defense, I was always able to fix any FF / nitpicking trouble myself (not afraid to go in the bowels, where this is necessary to change the values healthy from authorized sources) when they took place. Usually, a new installation circled if things start looking really bad, one or two times over the years, I had to serve and leave of completely, but this is the first time I had this works do not at all...

  I know there is probably nothing that someone can suggest in particular, but I hope!

  Thank you for following up - can try you with this driver directly from nvidia GeForce 8400 M G graphics card:
  http://www.GeForce.com/drivers/results/82468

• How much RAM it groups tabs use (on average)? Should I beware of groups and how much I have create?

  I can go overboard in creating groups of tabs. I say this because now my system begins to act a bit lazy. I created 7 groups, two of which have 9 or 10 tabs. Should I shoot the number of groups I create (as well as the way in which several tab located within each group). In other words: how much RAM tab groups use. How can I calibrate or understand the trade off between these markers and the amount of RAM they are using?

  You can see the use of memory on the topic: memory page.

  You can open on: pages through the bar of addresses as you open a Web site.

• Satellite M40-313 and Vista

  Hello

  I m a surfer of money with a counter top, but my 22 year old daughter, as recently bought it a second hand Toshiba Satellite M40 313, now she wanted to put Windows Vista Ultimate OS on it, I had my doubts, so I increased the RAM to 2gbs and gave it a try, it seems to work very well, he's a bit slow , after a couple of days a week and after several software maybe init started acting a bit erratic.

  Question is the will of the hold of the laptop operating system or would it be wise to low-grade it back.

  Yes, you must reinstall WXP. There are several reasons for this. My friends has the same model of laptop and it works well with Windows XP Home edition.
  So, this former model of laptop is designed for Windows XP Home edition and Toshiba offers no Vista support for this model of laptop. This means that there are no drivers or tools or utilities available. You will never be able to set up well with Vista.

  Install WXP using recovery delivered image or install your own WXP and all drivers, tools and utilities. You can find them on the Toshiba support page. In my view, it must be some leaves in ARCHIVES.

  If you need more help with installing Windows XP edition family thanks for posting again.

• Reset Safari Version 9.0.2 (11601.3.9)

  I use on my MacBook Pro (early 2011) running Mac OS 10.11.2 Reset Safari Version 9.0.2 (11601.3.9).  Safari has acted a bit wonky lately.  It happened at the wrong url, suspended for several minutes (beachball), etc.  In older versions of Safari, I could access the Safari item in the menu bar and pull down to "Reset Safari".  This option is no longer available.  So, how can I reset Reset Safari Version 9.0.2 (11601.3.9)?

  Thank you!

  Mark

  I suggest you only begin by taking the measures recommended in this support article.

• I dropped my phone in a small bowl of water, but only the top wet! (Camera and side buttons)!

  I dropped my phone in a small bowl of water, but only the top wet! (Camera and side buttons) but I caught as fast as I could and I put it in rice! The camera picture and everything work fine, but these last two days the phone has acted a bit! As it is a bit slow (which im hoping is just my access provider) and this morning I plugged my headphones, but they were not involved. It's as if they are not yet connected. Until I restarted my phone! All this may be water damage! Once again; the camera works very well and the buttons are too! I can take it to the Apple Store to watching it!

  Is one of the newest phones.   He should not have these problems.   Water works in many ways where electrics are concerned, and few of them are to our advantage.   Bring it to your local Apple store and ask for an assessment.

  Guarantees exclude the water damage.

• Windows Home Server disk failure

  Excuse the language, but I'm bricks now. I have aHP Ex470 with a volume of system of 500 Gig and two 500 gig drives. I have a seemed all our data are spread over two discs, but I can't be sure. Duplication is enabled.

  He acted a bit strange in recent weeks and now, after a reboot, it just flashes red on the status indicator and it does not start. I also hear a worrying thud. I removed the two storage drives , then it starts, with some caveats of course. I could start with one of the installed disks but not the other.

  I guess one of the disks is scrap. but the data should not always be safe? When I look at inte console under shared folders, it says on most of them that they're fails. In addition, some open but others, files in the ajecent folder, does not open because the program does not recognize the file format, even if it's the appropriate icon. And what should be my next move? I got a disc of 2 gigabytes, I intend to chuck in, if I do, will the system and data be safe? I know when the disc has not shown the other day, could not open some of the files, so as you probably understand, I am really worried now...

  Hi HarveyWallbanger,

  When you use Windows Server and the question you have posted is related to Windows Home Server, where it would be better suited to the Windows Home Server community. Please visit the link below to find a community that will provide the best support.

  http://social.Microsoft.com/forums/en-us/whshardware/threads

  I hope this helps.

• HP Jet 11-d010nr: flow 11 HP Touchpad drivers

  Problem: touch pad does not work.

  My 11 flow HP acted a bit off after upgrading Windows 10, so I finally had the time to do a clean install with Windows 10.

  Everything works fine now except the touchpad doesn't work at all.

  Things I've tried and other information:

  -J' I would be a bit of Google and I tried a lot of different 'solutions' on the son, I could find, which none have worked. Most of the solutions is a little older when W10 was always an overview and drivers were not available on the hp site as they are now.

  -J' have model 11-d010nr and I installed all the drivers available on the hp site, including the touchpad drivers that are listed.

  -Windows Update installed "- Pointing - Synaptics HID Device Design - Synaptics Synaptics Pointing drawing software update released in July 2015" without change.

  -There are no unknown device in Device Manager.

  -There is none "Mouse and other pointing devices" listed in the devices in addition to my logitech mouse Manager, I plugged.

  -"Synaptics" is not anywhere under programs. Even after having tried it 4 different of synaptics software/driver who engaged in the installation and said "complete" installation files There is a folder called 'Synaptics' with the subfolder according to 'C:\Program Files\Synaptics\SynTP', but only two files .ini inside.

  -J' tried the Synaptics site, no change drivers.

  It seems that the touchpad does not yet exist in the hardware. So I can't uninstall a driver wrong/bad for him, cannot see that this is not even to have a driver, etc.

  Thanks in advance, really need the touchpad!

  Hi, I did a new install of Windows 10 on my 11 stream also and the touchpad does not work after installation, until I installed the drivers from the chipset of the hp.com site.  I don't know why this does not work for you.

  In fact, I think only, I installed the chipset drivers and not the touchpad driver so maybe that made the difference.

• Tried to start Windows Mode safe start in normal mode after that screen remained on the lines of code for about 5 minutes...

  I know I have a virus. I scanned my system several times with many different scanners, but nothing is detected. Internet begins to act a bit funny, connection fast enough in the video stream and more. Never happened before...

  Hello

  ·         The computer starts normally now?

  ·         Which antivirus program is installed on the computer?

  Try the following.

  Method 1: Run the Microsoft Safety Scanner to search for infection by the virus. Check out the following link.

  Microsoft Safety Scanner - free online tool for PC health and safety

  Method 2: Optimize Internet Explorer.

  How to optimize Internet Explorer

  Method 3: Follow the steps in the article mentioned below.

  Increase the speed of the PC: optimize your computer, help your PC run faster

  See also:

  How to set performance options in Windows XP

  If the computer does not start then normally, reply with the exact error so that we can help you best.

• first firmware update went wrong...

  Hi all

  I have a wrt54g (8.1) who has acted a bit funny so done some searching on Google and followed the instructions to install a new firmware.  First of all, the installation failed, double checked to make sure I downloaded the correct file (FW_WRT54G_8.1.09.02_US_20071227.bin), made a reset and power cycle.  Checked the data again and everything on the configuration of the router has completely disappeared.  Each entry has NA next to him...

  > help!

  You can't put the same settings as you have before at least that you could not save the configuration. However, you can reconfigure the settings and still get online again. The following link can help.

  Different ways to set up your Linksys wireless router

• Problem with PowerCLI5.8 / PS4

  Hello

  I wrote a script to run a bunch of tests on our various sites of vCloud Director.  It works very well on the box I was developing it on (running Powershell 3 / PowerCLI 5.1 R1).  When I moved it to another machine (running Powershell 4 / PowerCLI 5.8) he begins to act a bit strange.

  For example, I took to bypass my commands like this:

  $Orgvdc = get-OrgVDC 'My first Org VDC'

  It works very well on the area running Powershell3/PowerCLI5.1 box, but if I run the same on my box Powershell4/PowerCLI5.8 I get the following error:

  Get-OrgVdc OrgVdc with the name "My First Org VDC" was not using the specified filters.

  Only, it seems to work on PS4/PCLI5.8 if I do it this way:

  $Orgvdc = get-OrgVDC | where {$_.name - eq "My first Org VDC"}

  
  

  Anyone know if something has changed in Powershell 4 or PowerCLI 5.8 that has stopped us being lazy and make the short method?

  EDIT: Just realized that it seems to work if I don't have any spaces in the name.  If Get-OrgVDC 'MyOrgVDC' works (when it exists with this name), but the Get-OrgVDC "My Org VDC" seems not to work - return an error "'My Org VDC' was not found using the specified filters".  If a problem with spaces then?

  Dave

  For the record, PowerCLI 6.0 with Powershell 4.0 solved my issue work and filters correctly on vCloud Director cmdlets in PowerShell ISE which is nice

  Dave

• Problem of scroll bar component.

  Hi all.

  I did a Web site that includes a section that loads external text into a dynamic text named event_info field. I've also added an element of vertical scrollbar to it. the target name is event_info.

  This is the code

  var url: String = "events.txt";

  var loadtext:URLLoader = new URLLoader();

  loadtext.addEventListener (Event.COMPLETE, completeHandler);

  LoadText.Load (new URLRequest (url));

  function completeHandler(event:Event):void {}

  event_info.text = event.target.data as String;

  }

  Problem: The SWF plays everything fine. However when I put the SWF file in Dreamweaver and test it in HTML, the scroll bar appears as disabled. does anyone know how to get around this problem?

  I appreciate the help.

  -Jeremy

  Hello

  Try the reallocation of the scroll bar to textfield.

  If you use the flash scrollBar component

  It can sometimes act a bit up.

  scrollbar.scrollTarget = textfield;

  Best regards

  Peter

• List drop-down selection within html cfgrid

  I have a html with a drop-down list grid in one of the cells. Its a rerouting menu but for help a standard drop-down list doesn't do the same.
  
  When it is placed in the cfgrid controls everything works very well with respect to rendering, but the GUI acts a bit strange because of the dhtml and css involved in the controls cfgrid.
  
  In order to select something from the menu drop-down I have to click on the cell/row to select I want to interact with, so I have to double click it to expand the select control to select an option. Is anyway to bypass this and be able to simply select an item in the drop-down list normally?
  
  I've included the code for my CFCS that I link below

  Yes I actually solve the problem, but not in coldfusion... I have rebuilt the application in ASP.NET.

• HP Bluetooth mouse Z8000 acting up on HP Stream 13 / 8.1 for Windows (64-bit)

  HP product   H6J32AA #ABA

  Both mouse Bluetooth Z8000 and 13 Stream Notebook PC HP bought new on Amazon.com November 2014.

  Z8000 mouse disconnects randomly and/or start up the mouse, click Windows popups all over the screen. All the latest updates to Windows and HP latest drivers from the HP support for HP Stream 13 page have been installed.

  For some reason, HP does not offer any what the mouse driver for the Z8000 on the technical support Web site, only a user manual.

  Until I throw this HP Bluetooth mouse (reason why I bought it was to save an of only two USB 2.0 ports on the PC stream) and install a USB wireless mouse I have will welcome suggestions having removed & reinstalled the mouse Z8000 and travel all various Bluetooth driver update options in the Windows Device Manager, all to nothing does not.

  Only reliable to reactivate this Z8000 whenever he leaves is to run through the Show Bluetooth devices/Add... (if nec) menu offered by the Windows task bar Bluetooth icon, but it's a royal pain and I'm about to give up the Z8000.

  TIA,

  daibak

  After having successfully used a clean install, bare metal of 64-bit Windows 10 Home (after a free update of Windows 8.1 home completed early August 2015) on my laptop HP Stream 13, I decided to dig this Z8000 HP Bluetooth Mouse, who had never worked properly, either with W8.1 or the upgrade on Windows 10 Home site despite the latest driver.

  To my surprise - in this new 'no - HP Support Assistant"(not installed), totally clean-install W10 home environment - Device Manager Manual updated W10 by letting MICROSOFT download and install the Realtek Bluetooth 4.0 card now has this Z8000 works perfectly on this HP Stream 13 for the first time since bought end of 2014.

  Realtek Bluetooth 4.0 adapter properties listed:

  Driver provider Realtek Semiconductor Corp.

  Driver date 05/08/2015

  Drive, Version 1.3.875.3

  There are now five items listed in the device under Bluetooth, including HP Z8000 Manager mouse

  I hope this help any with a clean bare metal install 64-bit Windows 10 home running on a HP 13 Stream because it frees up one of the two USB 2.0 ports that I used for a Logitech M705 wireless mouse. Z8000 is now a pleasure to use!

  daibak