DXDIAG and computer management information

Similar Questions

• Drive hard not in my computer but device and computer management Manager

  Hi all... I have some extremely important irreplaceable files on my second hard drive. Today, I bought an external to save them, and when I turned on my computer, I was unable to get the disk. The drive is listed as "RAW".

  Then I tried to start to recover files of any programs online, they just finally estimate a 35 hour and counting wait and then my computer crashed. So I restarted and now the drive is unrecognizable in "My Computer" but it is listed in the device (such as a storage device) Manager

  I tried 2 diff computers and also 2 different external case with the same result.

  For any help or suggestion is very appreciated!

  Thank you!

  Derek

  Hello DMoneyPros,

  • What is the status of the hard disk in disk management?
  • Your external hard drive appears as a raw management disk or hard drive Partition?

  If the disk hard not not display in Windows Explorer appears in disk management, this means that the hard disk is raw and is not formatted?

  You should try to assign the drive letter of the hard disk in the disk management and check if it appears in Windows Explorer:

  Change the drive letter:

  1. open computer management by clicking the Start button, click on the Control Panel, clicking system and Maintenance, clicking Administrative Tools, and then double-click computer management. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  2. in the Navigation pane, click Disk Management.

  3. right click on the partition or drive that you want to change and then click on change drive letter and paths.

  4. to change a drive letter, click on edit, click on assign the following drive letter, click the letter you want to use and then click OK.

  Thank you
  Irfan H, Engineer Support Microsoft Answers. Visit our

  Forum of Microsoft answers Feedback and let us know what you think.

• Driver DVD disappear from 'My computer' and 'Device Manager '.

  Vista HP Portable DVD player continues to disappear from 'My computer' and 'Device Manager '. Already tried Upper/LowerFilters.

  Hi, a few weeks ago, the DVD burner in the laptop suddenly disappearedmy computer (Windows Explorer).  The first thing I did was check theDevice Manager to see if the drive was there.  It was not the case.  Restarting the laptop did nothing.  Repeated several times, active Vista updates.  No change.  By checking the net, I tried to delete the Upper/LowerFilters in the registry, download it tool Microsoft fix , delete iTunes, do a system restore, to change all the parameters of thesleep and hibernation off and a few other things.  It appeared for the first time after that:

  1. Do a restore of the system for the first restore point.
  2. Remove the DVD writer.
  3. Restarting the laptop.
  4. Research of new hardware in Device Manager .
  5. Change all parameters of standby and Hibernate off. (I tried this method without this step first, but the drive disappeared after the computer went to sleep and woke up.)  Tried 3 times with the same results).
  6. Closing.
  7. Reinsert the DVD burner.

  On the next reboot, the DVD writer has been recognized and ended up in my computer and Device Manager .  No errors of any kind and no drivers were installed at startup.

  What has happened since then, in the last 4 or 5 days, is randomly disappears from thedesktop .  Usually after a few hours or more.  This time, however, it usually appears inDevice Manager after a search of new material.  No reboot required.  It will read from a DVD .avi files each time.  It has not been detected byDevice Manager maybe about 2 or 3 times, and after a simple reboot, it will be present inmy computer and Device Manager automatically after a reboot.  I read that the superior/UpperFilter mark has worked for many people, but for some, the problem returns.  In addition, many of the discussions on this question and proofreading are years.  It happened about 10 days ago.  Within 2 days before the problem appeared first, it was an update of windows, but also an update of iTunes.

  I noticed that I received this error when opening iTunes:

  "The registry settings used by the iTunes for importing and burning CDs and DVDs are missing. This can occur as a result of installing other CD burning software. Please reinstall iTunes. ''

  I have not reinstalled, no DVD player.  Uninstalled itunes again.  Since I finally got the drive to appear (using the method I described above), I did bother to reinstall iTunes because I particularly need it on this computer, worried that it may be the cause of the original problem and I wanted to see if the disc disappears again.  I did do it, however, let QuickTime installed.  Don't know if this could be a problem?

  I stumbled upon this suggestion, but I also had the same question as the next post, and I have not seen a response.  I don't know if or how I should try:

  Nikki,

  You can not go back if the restore points aren't there. Try to reinstall the IDE driver.

  To do:
  -Click on the round to start and right click on computer
  -Left click on properties, this will open the system window
  -Click on device high Managerin left
  -Click on continue if prompted by UAC
  -Goto the 'IDE ATA/ATAPI controllers' you should right click on uninstall and restart

  BTW that dog rox in this avitar

  See you soon! MCP. MCDST. LVL 80

  Hi, thanks for the comment on my puppy. She is now 5 MB and her name is Nikki, lol.

  Well, I tried what you said, but the IDE ATA/ATAP controllers has a (+), so when I select it does give me not an option to uninstall. It is for me (analysis of the physical changes (or) properties).       and if I click on the (+) sign I have 4 different options. 2 channels IDE, Intel (R) 82801 HEM / HBM SATA AHCI controller and Intel(r) ICH8M Ultra ATA Storage controllers - 2850.

  http://social.answers.Microsoft.com/forums/en-us/vistahardware/thread/e3701d75-9dbe-4ae9-9d70-83f14129247c?Prof=required

  What I see in "Device Manager", under IDE ATA/ATAP controllers is:

  IDE channel (x 4)

  Ricoh Memory Stick Controller

  Ricoh SD/MMC Host Controller

  Ricoh xD-Picture Card Controller

  Controller of PCI standard IDE dual channel (x 2)

  The laptop is about 2 years and never had problems.  The DVD burner is hardly used to burn, maybe a total of 5 disks in this time.  It has been used occasionally to read or copy from, but not much.  I'm not convinced that he is dead, as I had 2 die on me in desktop computers, after burning hundreds of CDs in them and read much.

  in any case, I was not able to find any bugs or suggestions (with the exception of 'replace' the reader), so I just wanted to describe my specific situation and see if anyone could help out.  Forgive me for information, I have left out, but I am an amateur when it comes to the problems with the computer and still don't know what mean things or where I can get information on my OS, software or hardware.  All anyone can do would be greatly appreciated.

  This is the information I have:

  HP Pavilion dv6700 Notebook PC

  Optiarc DVD RW AD-7560 ATA Device

  Vista Home Premium

  Service Pack 2

  Thanks again for any help.

  Hello
   
  1. do you have the software installed on the computer of CD/DVD burning?
   
  Check if the CD/DVD drive is recognized in the BIOS (Basic Input/Output System).
  Check ' BIOS: frequently asked questions ": http://windows.microsoft.com/en-US/windows-vista/BIOS-frequently-asked-questions
  Step 1: We also recommend to uninstall the CD/DVD burning software, if you have everything installed, restart the computer and check the result.
  Scan for the device in Device Manager. To do this, try the following steps.
  1. click on start, type devmgmt.msc and press to enter.
  2. click on one of the items in the list, click the Action menu and click Scan for hardware changes.
  3. check if the CD/DVD is displayed.
  
  For more assistance on this, contact the manufacturer of the laptop.
   
  Kind regards
  Syed
  Answers from Microsoft supports the engineer.

• Local users and groups is missing from computer management

  I can't find the local users and groups folder in computer management. He is absent.

  Hello

  Advanced management tools are only available in the Windows 8 Pro version. It seems that you have the standard version of Windows 8. Windows and Windows 8 RT have local users and groups with disabilities.

  You can also check the wire and check.

  The local users and groups missing

  Hope the helps of information. Let us know if you need help with Windows related issues. We will be happy to help you.

• Not the users and groups folder under computer management

  Original title: no access to users and groups in Windows 8 Pro

  Right click on computer, select Manage

  There is no option in the management of the computer!

  WHY? How to view?
  Thank you
  Hi Johnny,.
   
  
  Looks like you are unable to get users and groups under computer management.
  
   
  I would like to gather information to help you:
   
  
   
  (1) how do you try to locate users and groups under computer management?
  (2) you are able to view other folders in the same section?
  (3) don't you make changes to the computer before this problem?
  
   
  I suggest you to check if the steps will help you to locate users and groups folder under Computer Management:
   
  
  (a) Windows and X set button, and then select computer management.
  (b) double click on system tools.
  (c) click on local users and groups.
  (d) check if you are able to find users and groups folder.
   
  Do we not respond with the status of this issue.

• iOS block report because of the third-party application, I answered and they managed remotely on the computer, now I know it's a scam, I turned off and reset the password, I'm in the clear?

  iOS block report because of the third-party application, I answered and they managed remotely on the computer, now I know it's a scam, I turned off and reset the password, I'm in the clear?

  If you allowed anyone remote access to your computer (and you're talking about a computer since you mentioned iOS which is the OS for iDevices; computers run on Mac OS X), while no one knows what they were able to install. Assume the worst and:

  Notify your credit card company / bank of potential fraud

  Change your bank accounts and report your fly/fraud credit card

  Change all of your passwords

  And, finally, erase your entire hard drive and reinstall the OS from scratch using recovery or your original installation disks.

• Just as a reference: how to FIX the annoying 'White Screen Of Death"with Silverlight and"Access denied"error with computer management.

  Well, I just hope that someone who has met these two mistakes will find my dose. It might save a lot of pointless research on the net.

  SYMPTOMS:
  -When you try to open a Silverlight application in your browser (Firefox, Chrome, IE, etc), your browser displays only a white area. When you right click on the white area, you can click on the Silverlight properties.
  -If you try to start "Computer management" by clicking on the 'My Computer' icon and select 'Manage', you get the following error: 'access denied '.

  CAUSE:
  The following errors are usually the result of a bad environment variable. In this case the "windir" environment variable does not work correctly. You can try running the management of the computer to start > run and entering:
  %windir%\system32\mmc.exe/s %windir%\system32\compmgmt.msc

  Notice the between the characters of percentage windir environment variable. If you run the above code, you will probably get an error saying that MMC cannot open the file. Look closely at the path, it's back!
  You will probably find any % somewhere.

  What actually happened here is the variable windir made reference to another variable: systemroot
  Why this creates problems, I'm not sure. Also, I don't understand what made then variable windir change.

  SOLUTION:
  -From your desktop or Explorer: right-click on "My computer" and select "Properties".
  -Click on the "Advanced" tab and then click "Environment Variables".

  http://pcauthorities.com/images/advanced-system-properties-XP.jpg

  -Did the windir variable. Together to "C:\Windows" do not think that it is already set to "C:\Windows", because windows then tells you. Double-click it to know for sure.

  http://www.adminxp.com/windowsvista/envvariabl.PNG

  -See, I told you! Change this to "C:\Windows".

  http://www.adminxp.com/windowsvista/editenvvar.PNG

  Hi Jooch,
   
  Thanks for posting such a detailed response, including symptoms, Cause, and resolution to "White Screen Of Death" with Silverlight and "Access denied" error with computer management"issues.
   
  I appreciate your time and effort to do the same. This could help other users of the forum as well.

• How long the information remain in the log of Open Sessions within shared folders in computer management?

  I want to know how long newspapers located in the shared folder in computer management > section open Sessions are kept during for XP and Windows 2000 Server.

  I guess it's on the order of 4 to 8 hours, but I need a firm answer.

  Hello

  Is generally answer the question you have posted in the Microsoft Answers forums. It is better suited on TechNet forum

  TechNet Forums - http://social.technet.microsoft.com/Forums/en-AU/winservergen/threads

• Control Panel is not on the list. Users and local groups does not appear in computer management.

  1. click on start, and then point to setting, control panel is not on the list.  When you try to get to the Panel of control via a link in Help and Support, had an error, "operation has been cancelled due to restrictions in effect on this computer.  Contact your system administrator. »

  2. local Users and Groups does not appear in computer management.

  There is only one profile on the PC, the OS is XP Home.  It seems lost his administrator privileges somehow my user profile.  Could you please suggest how to solve this problem?  Thanks in advance.

  Hi PJohnson,

  You can access the link below and follow the steps in the article to create a new user account and copy the data to the new account.

  http://support.Microsoft.com/kb/811151

  I hope this helps. Let us know the result.

  Thank you and best regards,

   

  Srinivas R

  Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• I need activate vista windows aero but disable them deleted on my computer and Desktop Manager on my own :(

  I need activate vista windows aero them but them deleted on my computer and Desktop Manager disable on mine :(

  Please see the following article with a Mr. fixit and other solutions for a missing aero theme:http://support.microsoft.com/kb/945000.

  This is an art. that addresses both the disabled and disabled aero Desktop Manager problem and a possible solution:http://support.microsoft.com/kb/934561.

  Here is another article on troubleshooting problems with Aero and Desktop Manager:http://www.mydigitallife.info/2006/12/17/get-and-enable-windows-vista-aero-glass-transparency-effect-and-desktop-windows-manager-dwm/.

  I hope this helps.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• cannot get rid of the "removable disk" in "my computer" and "Device Manager", after incorrectly removing a USB flash drive

  I stupidly, twice - after using USB flash drives - just shot when he in fact without removing them properly. Now, they are listed at all times in my 'Device Manager' and in 'my computer '. I went into Device Manager and tried to uninstall them. It seemed to work but the next time I booted up Vista found drivers and now they are back in 'my computer' and Device Manager. This does not seem to be a problem, but I would like to get rid of them.
  Joe

  Hi JoeZZ,

  Please see the following instructions on how to see the ghost devices:

  http://support.Microsoft.com/kb/315539/en-us?p=1

  I hope this helps!

  Debra
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• computer Windows does not recognize my 2nd hard drive but the computer management and the two bios say he's here?

  Secondary drive of HP laptop.  Vista ultimate 64 bit OS.   I installed a hard drive, formatted with computer management, check the bios, as saying that this is? I haver to do?

  Steve, run Bios secondary ck drive it passeds all tests.

  Computer management is fwhat I used for the format and the name of the drive.  It recognizes the drive!

  When I click on computer is not there? Why

  No errors, Ran H P health check it says his State there but intelligent smart stranger.  BIOS says smart successful test.

  Returns the 320 GB sata drive and bought a 250 GB sata drive it works. Don't know why computer windows didn't see it or report it defective.

  Another problem I had.  I have replace the c drive he had run a windows launched out of the backup of the computer, to another drive. tried to restore it. It did not restore my nero or any other software and updates.  Is there a way completely a backup disk and restore all on a new drive.  I'm not stealing everything that I bought everything.  Norton Ghost will do it?  E-mail address is removed from the privacy * pls send an e-mail.

• Don't Win 7 Home Premium no local users and groups under computer management

  I am trying to create local groups, but when I go into computer Managemmt as an admin there no option groups in the tree.  Aide said it is in "computer Management\System Tools\Local and Groups\Groups users", but the only options I have under system tools are planner of the event viewer, shared folders, Performance and device - not local users and groups management tasks.  No idea how I can get access to this?

  I think that it is only available if you have Windows 7 Professional or ultimate edition. Bob Larson Access MVP

• Where the local users and groups in Win 7 Home Premium? I don't find it in computer management.

  Where the local users and groups in Win 7 Home Premium?  I don't find it in computer management.

  Elevate your privileges permanently would defy the purpose of UAC and is therefore not available. There are two ways to start a command prompt:

  1. click on the start planet.

  2. type the three letters cmd in the search box.

  3. press on Ctrl + Shift + Enter

  4. click on "run as Administrator".
  or:
  1. create a shortcut on the desktop for cmd.exe.
  2. right click.
  3. click on run as administrator
  
  

• Hi, my dvd player does not show on my computer and Device Manager. can someone help me?

  Hi, my dvd player does not show on my computer and Device Manager. can someone help me? HP dv6700z laptop.

  # It is now showing there either. Thank you.