Dynadock U3.0 win 8 - Ethernet and Audio does not

Similar Questions

• Win 7 Backup and Restore does not recognize the USB flash drives.

  Win 7 Backup and Restore does not recognize the USB flash drives for a backup image or a recovery disc.  Given that Windows 7 Starter Edition is used in many, if not most of the netbooks and netbooks have no optical drive, support for flash (thumb) drives would be very handy, especially for repair and recovery.

  Back up and restore: frequently asked questions
  http://Windows.Microsoft.com/en-us/Windows-Vista/back-up-and-restore-frequently-asked-questions

  You can't save backups to a flash drive, you need an external USB hard drive.

  JS
  http://www.PAGESTART.com

  Never be afraid to ask. This forum has some of the best people in the world to help.

• HP Notebook: Wifi and Audio does not work after update of the 10 victory

  I updated the OS to win 8.1 to 10 and it was somthly, but after this recent update to win 10 all at once the wifi has ceased to recognize all the networks around it... also the audio has stopped working. I tried the two troubleshooting and found the audio starts to work after you troubleshoot but wifi does not work. This happens everytime I turn on my laptop, and whenever I have to solve an audio driver to fix it but the wifi doesn't work every time... Please help... I also tried to update the drivers of these two, but he said that the drivers are updated every time... Please let me know if anyone can guide me through this problem...

  Hey @Riken_HP,

  Welcome to the Forums of HP Support! This is a great place to find solutions and help our community!

  I understand that you are having problems with the wifi on your HP laptop. I'd be happy to help you.

  What is the exact model of your laptop? If you do not know who will find it here: http://support.hp.com/us-en/drivers

  The following pages are useful for troubleshooting wireless connectivity problems.
  Troubleshooting wireless network and Internet (Windows 10)

  In addition, you can watch the the power management of your wireless adapter:
  Turn off the power to the adapter:
  1. open Device Manager. (Win Key + R > type devmgmt.msc > OK)
  2. expand the network adapters.
  3. right click on the Ethernet adapter / wireless, and then click Properties.
  4. click on the power management tab.
  5 remove the check mark next to allow the computer to turn off this device to save power.
  6. click on OK.
  7 test cycle.

  Forget a network (Windows 10)
  Forget wireless network profiles in Windows 10

  Reset TCP/IP on your PC:
  1. go to your start screen/menu and type CMD.
  2. right-click on the command prompt icon and select run as administrator.
  3. in the window that opens type "netsh int ip reset resetlog.txt" without the quotes and press ENTER.
  4 restart your PC and test.

  It can also help to reset the Winsock Catalog:
  1. go to your start screen/menu and type CMD.
  2. right-click on the command prompt icon and select run as administrator.
  3. in the window that opens type "netsh winsock reset" without the quotes, and then press ENTER.
  4 restart your PC and test.

  Reinstall the NIC drivers:
  1. download the drivers from here, but do not run them again.
  2. go to your Start menu/screen and type Device Manager.
  3. expand network adapters.
  4. right click on the wireless adapter and choose uninstall.
  5 install the drivers downloaded in step 1.
  6. restart your PC and test.

  Test an ethernet connection:
  Not call explanation. Test if the problem persists on a wired connection to the adapter hardware troubleshooting wireless can be directed to the appropriate areas.

  Test another connection:
  Many people excluded their home network as a problem if another device working on the same network. Networking is not as simple as that. Each device interacts differently with your router or modem and it is impossible to exclude the settings for this device until the laptop has been tested on another network.

  Please hold me.

  By pressing the Thumbs Up button below, you can always say thank you!

  See you soon.

• Ethernet and Modem does not not on Satellite A80

  I bought a laptop Toshiba Satellite A80 with windows XP Home Edition. I have upgarded OS for win XP Professional. Now the ethernet and modem services are not installed. I downloaded the drivers from the toshiba web site and tried to install it. But no progress. How to install the drivers for the modem and ethernet?

  Hello

  You need to enter the Device Manager and choose devices that require drivers.
  Then choose the option to install the drivers. The source of the driver s is the place where you have you extracted the drivers.

• Windows 10 WiFi and Audio does not not with El Capitan

  Ive recently reinstalled windows 10 on my iMac 27 "retina with 3 TB fusion 2015 end stop a disc, the latest version of El Capitan because of a problem with the Wifi and audio work (I thought it was a fault of windows) and after a few days using the new facility did exactly the same thing.

  WiFi drivers seem to be installed but it can't find any Wifi network (despite the fact that she found them perfectly before) and the sound doesn't bring any connected audio device. There is no missing drivers shown in Device Manager, I tried the fix this peripheral option in windows and it did nothing.

  I tried to re-download the bootcamp drivers by opening the wizard boot camp under OSX and when I click on continue on the first screen, I'm greeted by the error message

  The startup disk cannot be partitioned or restored to a single partition.

  The startup disk must be formatted in a single volume in Mac OS extended (journaled) or already partitioned by Boot Camp Assistant to install Windows.

  So I can't create a new usb key to install the drivers again, or even delete the partition to try again.

  Everyone knows this, and if anyone has found a solution? As I said it's the second time this exact same failure so I think its either a hardware fault or a fault in the bootcamp drivers

  Thanks in advance for any help

  Gary

  1. If you have set to automatic updates of Windows, I suggest that disable you. You found no WHQL compatible Apple standard drivers that cause pain.

  2. to download the driver BC6 package, use wizard BC and

  

  3. your installation W10 has been an update to W7 / W8 + or a clean install?

• Ring of blackBerry Smartphones Urgent-bold 9000 and audio does not work after upgrade to 5.8.8.822

  Updated yesterday at 5.0.0.82 2 and now DO NOT ring the phone.

  Also get the message "an error occurred attempt to play media" for all types of media even when I test the profiles.

  Battery pulls and all the usual stuff, but no help.

  His camera work.

  How to downgrade OS and that is should I go since it is not good?

  Hello

  Make sure that you run software that is released by your carrier found here: http://na.blackberry.com/eng/support/downloads/download_sites.jsp

  Download and install the latest version of the software on your computer, then follow this link to complete a clean reload of the BlackBerry Device software.

  Link: http://bit.ly/cKy9A0

  Test before you restore all backups.

  Thank you

• My computer only plays system sounds and audio does not work.

  When I tried to open a file in windows media player I am prompted that there is a problem with my audio device. I am currently running windows xp and my computer is a HP Compaq Presario v2000

  Hello
  1. is the issue limited to Windows Media Player?
  2. What is the accurate and complete error that you receive when you start Windows Media Player?

  Please provide more information on the issue so that we can better help you.
  In the meantime, you can check the link below.
  No sound in Windows
  http://Windows.Microsoft.com/en-us/Windows/help/no-sound-in-Windows

• Ethernet and Wireless does not not (brand new Inspiron N4050)

  I just bought a new laptop today here in Chile, South America. It is a Dell Inspiron N4050, running Windows 7 Home Basic, Service Pack 1. I was not able to connect to the internet via an ethernet cable or wireless. The wireless indicator is lit (duh!) and the ethernet cable works with a PC, sitting next to the laptop. I have a modem ARRIS (Yes, third world) and it works fine wirelessly with other devices such as phones and laptops here. When I plug the ethernet cable it tells me that it cannot identify the network. I see not all wireless connections, but it's the same, impossible to identify the network. I tired all sorts of things, after studying Informatics myself I'm not a beginner, but the OS is in Spanish, so it's really hard to make sense of things. If I can't fix this soon I'll be forced to reformat the computer. Pros do it is that I'll get the English operating system and lose all waste Dell pre installed on their products. The downside is that I don't have the drivers installed for the NETWORK card and other things (although they should be on the optical disc supplied with the laptop). Perhaps the problem is the modem, maybe I need a driver for it. Somehow, I don't think that's the case because I brough my own hard drive of my home country and I put it inside the PC and instantly connected to the internet via the modem. Any thoughts?

  ipconfig:

  IPv4: 169.254.113.41 (link-local address)

  Subnet mask: 255.255.0.0

  Default gateway: no

  
  

• Installed Windows 7, Ethernet and Wireless does not. No HP tool... Help.

  Long story short, I had to install Windows 7 and I used to have the HP support on my laptop but I don't do that anymore. I own a HP Pavilion G7 1329wm. 4 GB of Ram, AMD Vision of A6, MCE don't know what else to say except that I have a sticker that says "HP first Experience".

  I plugged in an Ethernet cable for the mdoem, lights on the modem so I know that works, I plugged the ethernet cable into my laptop, and a white light came through the ethernet jack in. I tried to diagnose the problem in network and sharing, but nothing comes. No connection even if the modem is internet radio and I'm sure that I'm on another computer with the same access to the network. Can I get help?

  Hello:

  The ethernet controller is:

  http://h10025.www1.HP.com/ewfrf/WC/softwareDownloadIndex?softwareitem=ob-100079-1&CC=US&DLC=en&LC=en&os=4063&Product=5218722&sw_lang=

  You must visit the AMD site for the SM Bus controller, because it is part of the chipset driver that is not taken in charge of your PC and driver page.  Download and install the drivers for the chipset Windows 7 from the link below

  http://support.AMD.com/us/gpudownload/Windows/pages/raid_windows.aspx#2

  The PCI device is probably the realtek card reader that needs a driver.

  http://h10025.www1.HP.com/ewfrf/WC/softwareDownloadIndex?softwareitem=ob-103100-1&CC=US&DLC=en&LC=en&os=4063&Product=5218722&sw_lang=

  Because there can be a lot of different styles of cards installed in your laptop wireless, I need to display the ID of the hardware for the network controller element.

  If you do not know how, please read this guide where they show you how to find one. Just do the same thing for the network controller.

  http://laptop-driver.blogspot.com/2009/12/how-to-check-hardware-ID.html

  Paul

• Video and Audio does not move to the timeline.

  Hello.

  For these last days, I worked on a video in Adobe Premiere Pro CC. I got no problem with sounds moving in the timeline, so far...

  I can now move more video/audio files to my project on my calendar. The only way I can do this, is to make a new sequence, but that means, I don't see anything in the other sequence, it is simply a small hand closed and a crossed circle.

  No idea how to fix this? I posted a picture of my calendar down below.

  Thank you!

  

  I have a vague feeling that you have a point and an out point in your calendar that could interfere with your work, but I can't be sure. Try a right-click anywhere in the timescale of your timeline and choose 'Clear In and Out'. Then try to use mobile media in the Timeline. Please let me know if it works or not. Good luck!

• WIN 7 backup and restore does not

  Hello

  I tried several times to get the backup works on WIN7, recordings, ran virus and malwares and finally disk, removed and used the

  Assistant. The problem is I used to be able to use VISTA and WD Passport external drive backup, but since the upgrade to WIN7, I spent more than 30 hours, determined to get this started.

  Finally, the backup will only recognize G Drive and I'm trying to get the backup to recognize the drive (F) which has been reformatted several times. I can't do

  go... help please!

  Havanese

  Thank you for your response.

  I appreciate your efforts and the patience that you put to solve this problem, sorry for the inconvenience.

  I suggest you try the steps from the following link:
   

  Error code 0 x 81000031 occurs when you try to back up files by using the backup and the restore on a Windows 7 Computer Wizard.

  http://support.Microsoft.com/kb/975692

  Hope this information is helpful and let us know if you need more assistance. We will be happy to help.

• I have synced clips successful but video and audio are not visible until it is developed to the timeline. Returned results completely black film without sound. Any tips?

  I have synced clips successful but video and audio are not visible until it is developed to the timeline. Returned results completely black film without sound. Any tips?

  Please give as much information as possible on your support. The video and audio works in QuickTime player? What are the specifications of media?

• Sometimes the audio does not work and another day, everything is ok. What can this be? IK have an Asus laptop and I work with windows 7. The melody of the beginning when I put on my laptop is ok

  Sometimes the audio does not work and another day, everything is ok. What can this be?  IK have an Asus laptop and I work with windows 7. The melody of the beginning when I put on my laptop is ok

  Hello Ronald.

  A problem are not uncommon. Something for you to try:

  http://Windows.Microsoft.com/en-in/Windows/no-sound-help#no-sound=Windows-7&V1H=win8tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1

  Let me know if this solves the problem for you.

  Kind regards

  BearPup

• When you try to watch tv in Windows Media Center, I get black screen and audio sometimes and sometimes does not.

  Black screen in Windows Media Center during the TV

  When you try to watch tv in Windows Media Center, I get black screen and audio sometimes and sometimes does not. Any fix for it?

  TV works on the other program I have and has been workign on MC last week, but now I don't?

  Some success with this issue (its OK, but BLACK) video for live/recorded TV

  ' 1) ' disabled ' tuner card (Ati HD 650 PCIe) TV [via right click] in the Device Manager
  (2) restart Win7 64-bit
  (3) Win7 located & reinstalled the drivers
  (4) VOILA!   Real video and audio live & recorded TV

  BTW - before above fix in Device Manager:
  Notice anything in his video & Game Controllers
  'Properties' reported 'this device is functioning.
  "Update drivers" reported "... software driver...»
  ... and no updates of WMC anywhere in sight

  Go figure!

• Audio does not not on Netflix and Youtube.

  Original title: Audio does not

  Do not play when I try to go on Netflix or YouTube audio. And he says that there is something wrong with my sound drive but when I troubleshooted, he told me that they could not detect the problem. The audio was working fine yesterday and I don't know what could be wrong.

  Hi Ryan,

  I appreciate the efforts to try to solve the problem. Please write us with the following details.

  1. Faced with this problem only when you listen to music online? If so, which browser do you use?
  2. Have what troubleshooting methods you tried?
  3. What is the exact full error message?
  4. What is the brand and model of your computer?

  You could deal with this issue to cause corrupt driver. If the problem is specific to the websites you mentioned then you might face this issue because of some wrong settings. I suggest you to follow the steps given in the links below and check if it helps.

  http://answers.Microsoft.com/en-us/IE/Forum/IE10-windows_8/no-sound-from-YouTube/5f734e68-5007-4ECF-9514-6c9697029404

  http://answers.Microsoft.com/en-us/IE/Forum/IE10-windows_8/no-sound-on-Netflix-website/f5f0c9c2-2295-4c6a-892B-8ecae6c333e9

  Write to us at the State of the issue and the details asked so that we can help you more.