Ethernet and Modem does not not on Satellite A80

Similar Questions

• Satellite A100: USB and Modem does not

  Hello!

  My name is Clarisse and I have a Satellite A100, which I use for school. I'm having a problem with its usb ports and modem.
  When I try to connect to the internet, he just say he of no tone and tells me to ensure that lines are connected, who they are and the phone line works certainly, as I checked with my PC and I also checked the phone if it was busy, it wasn't.

  I then try again and a window appears and says that there is something wrong with my modem, how can I fix?

  The other issue is my usb ports who refuse to work, they can't recognize anything I plug (for example, bluetooth adapter, flashdisk, ipod) even though they are installed!

  However, the strange thing is that when I plug in my printer it connects and does its job:(je suis tellement confus et scolaires est devrait commencer bientôt.)

  Can someone help me please?

  Thank you
  Clarisse

  Hello

  In my opinion the modem connection does not work due to the modem settings.
  Go to Device Manager and select the properties of the modem.
  Please select the Modem tab. You will find the option "wait tone before dialing." You must disable (uncheck) this option.

  I guess that the USB ports cannot recognize the external USB ports because of the power.
  The USB ports provide 500mA. It is a standard USB. If external devices use a power greater than 500 ma, so it is possible that the device may not be recognized.

  In such cases, the USB hub with an external power supply can solve these problems.

• Ethernet and Wireless does not not (brand new Inspiron N4050)

  I just bought a new laptop today here in Chile, South America. It is a Dell Inspiron N4050, running Windows 7 Home Basic, Service Pack 1. I was not able to connect to the internet via an ethernet cable or wireless. The wireless indicator is lit (duh!) and the ethernet cable works with a PC, sitting next to the laptop. I have a modem ARRIS (Yes, third world) and it works fine wirelessly with other devices such as phones and laptops here. When I plug the ethernet cable it tells me that it cannot identify the network. I see not all wireless connections, but it's the same, impossible to identify the network. I tired all sorts of things, after studying Informatics myself I'm not a beginner, but the OS is in Spanish, so it's really hard to make sense of things. If I can't fix this soon I'll be forced to reformat the computer. Pros do it is that I'll get the English operating system and lose all waste Dell pre installed on their products. The downside is that I don't have the drivers installed for the NETWORK card and other things (although they should be on the optical disc supplied with the laptop). Perhaps the problem is the modem, maybe I need a driver for it. Somehow, I don't think that's the case because I brough my own hard drive of my home country and I put it inside the PC and instantly connected to the internet via the modem. Any thoughts?

  ipconfig:

  IPv4: 169.254.113.41 (link-local address)

  Subnet mask: 255.255.0.0

  Default gateway: no

  
  

• Installed Windows 7, Ethernet and Wireless does not. No HP tool... Help.

  Long story short, I had to install Windows 7 and I used to have the HP support on my laptop but I don't do that anymore. I own a HP Pavilion G7 1329wm. 4 GB of Ram, AMD Vision of A6, MCE don't know what else to say except that I have a sticker that says "HP first Experience".

  I plugged in an Ethernet cable for the mdoem, lights on the modem so I know that works, I plugged the ethernet cable into my laptop, and a white light came through the ethernet jack in. I tried to diagnose the problem in network and sharing, but nothing comes. No connection even if the modem is internet radio and I'm sure that I'm on another computer with the same access to the network. Can I get help?

  Hello:

  The ethernet controller is:

  http://h10025.www1.HP.com/ewfrf/WC/softwareDownloadIndex?softwareitem=ob-100079-1&CC=US&DLC=en&LC=en&os=4063&Product=5218722&sw_lang=

  You must visit the AMD site for the SM Bus controller, because it is part of the chipset driver that is not taken in charge of your PC and driver page.  Download and install the drivers for the chipset Windows 7 from the link below

  http://support.AMD.com/us/gpudownload/Windows/pages/raid_windows.aspx#2

  The PCI device is probably the realtek card reader that needs a driver.

  http://h10025.www1.HP.com/ewfrf/WC/softwareDownloadIndex?softwareitem=ob-103100-1&CC=US&DLC=en&LC=en&os=4063&Product=5218722&sw_lang=

  Because there can be a lot of different styles of cards installed in your laptop wireless, I need to display the ID of the hardware for the network controller element.

  If you do not know how, please read this guide where they show you how to find one. Just do the same thing for the network controller.

  http://laptop-driver.blogspot.com/2009/12/how-to-check-hardware-ID.html

  Paul

• Dynadock U3.0 win 8 - Ethernet and Audio does not

  Hello

  I recently bought a UX31A Ultrabook and the Toshiba Dynadock U3.0. My computer is running 64-bit Windows 8.

  I followed the installation instructions to the letter and that you have installed DisplayLink 71M 1, however I can not the ethernet or audio routed through the docking station.

  On the ethernet port it is green indicating that it is connected and has a yellow flashing light indicating the traffic is, however it is not transmitted to the computer. Under network settings, there is no Ethernet/LAN link, only wifi and BT. He can't find any other connection if I search for one.

  Similarly the audio cable. Plugged into the audio port 2 front channels the computer doesn't recognize it, only playing audio through the computer.

  I can run 3 monitors (2 external and the ultrabook) very well, USB (2.0 and 3.0) is ok, the dongle for the keyboard and the mouse is very good too.

  Any help would be greatly appreciated, I rebooted and reinstalled the County ot again!

  Thank you very much. Brad.

  Hello

  try to transfer the authentication settings of the internal to the external network adapter.
  Open the properties of the internal network card and choose the parameters of the tab "authentication."

  Now check the option titled enable IEEE 802. 1 x authentication for this network
  Choose EAP type: EAP (PEAP)

  Also check the option called authenticate as computer when computer information is available

  After you apply the settings on this tab map LAN Dynadock, it should work without any problems.

• Sound and Modem does not not on M30x-129

  Hello
  Is could someone please tell me how I can get my modem and his work? It was working fine until last week.
  Thanks in advance

  Hello

  Check if the two devices are properly recognized in Device Manager. If you are going to see some yellow exclamation points, so you should try to install the correct drivers.
  You will find all necessary drivers on the tools & cd utility or on the Toshiba site.

• Lenovo 3000 N 500 sound card and Modem do not work in Windows XP

  Hello

  I buy Lenove 3000 N500 a few days back from local sellers in PAKISTAN. It has built in Windows Vista.

  I change its Windows XP operating system, now my sound card and modem does not work, there is only PCI device in device manage with yellow sign, but in the Control Panel, there is no modem or sound card.

  I gave the two conextant Audio and Modem drivers against the PCI device but system says that there is no such device for these drivers.

  and when I run Setup conextant Audio and software of the Modem, it is said that there no such device FRO these drivers

  Please advice what to do to make it functional.

  Thank you

  Sani

  If you use the version pre - SP3 of XP, you must install KB888111. It's the UAA bus driver. After you install this hotfix, install the audio driver and modem driver.

  Enjoy.

• Satellite A30, Win XP Pro SP3 - modem does not work

  Another problem with this laptop Satellite A30
  The built-in modem does not work.

  * Explanation: *.
  The driver is correct and downloaded from the Toshiba support site.
  The modem is identified as "Toshiba software modem amr" and is installed on com3 port.

  When I click on "diagnosis" and "ask modem" (right labels can be different, since my is an Italian win xp, I just translated the Italian labels), a window pops up saying: it is impossible to open the door (port), the modem is connected to.

  I tried to change the com port of the modem to different numbers, but the problem is the same.
  I don't know if the modem is a real map connected somehow to the main Board or is built right on the main map. It would be the first case, I may change see ad. BTW, the mini slot pci is already occupied by the gigabyte of Wi - Fi, so the modem must be elsewhere.

  This is strange, since I've done at least 2 other win xp pro on this machine facilities, always download and install the appropriate drivers, and the modem has never worked.
  Thank you
  S.

  Hello

  Have you installed the SP3 Windows XP Home edition, then the drivers or SP1 and later updated to level to the SP3 version?
  > It's strange, because I did it at least 2 other facilities on this machine pro win xp
  What other facilities?

• Satellite A30-504 modem does not

  Hi all

  Old old old Satellite A30 504 my father had problems of modem for quite awhile. Here are the symptoms exposed:

  Modem is recognized as "TOSHIBA Software Modem AMR" and classified works correctly. However, when you query the modem, I get the following message:

  + The port that the modem is attached could not be opened. This can be the result of a hardware conflict. Check the Device Manager to verify that all devices are functional. +

  Settings of resources:
  Range of e/s-2400-24FF
  E/s series 2000-207F
  IRQ 7
  (I can't change any of these settings)

  Needless to say that the modem does not work.

  Has anyone ever met such a problem before? Does anyone know of a way to fix this? I really don't want to get a PCMCIA modem for this laptop, so any help would be greatly appreciated.

  Thank you in advance!

  Dan

  > I have reinstalled Windows XP twice
  How? Do you use the restore disc Toshiba for the installation of Windows XP Home edition?

• Satellite A200 - 1 GB: my modem does not work - remote computer is not responding

  My A200 - 1 GB modem does not work correctly. It tries to connect, but at last he said computer remote does not respond. As I noticed it has a modem 56kpbs of "I agree."
  It is shown as Toshiba Software Modem.

  I tried so many times it does not work properly.
  I tried changing the COM ports assigned to several other ports like COM1, COM10 COM, COM 4 ext... same thing happens.

  When I diagnose the modem via the properties of the modem without issues considered.
  Even when I'm component via the modem to a telephone line (I mean as a call) it works fine.
  I mean that he can call on a mobile phone or phone of the Earth.

  A few times he suddnely connects but connected sppedis 24kpbs.

  But the same phone line works correctly with my modem office both as the same as another modem from the laptop.

  It seems that there is a fault on my modem 56 k.
  I tried even uninstall and reinstall, but the issue still exists.

  Can someone help me in this case?

  Hello

  I don t think that the modem would be malfunctions.
  Fact is that if you use the wrong modem configuration, the line may be busy and the modem would not answer.

  I recommend you configure the modem again.
  In programs-> Toshiba-> Networking, you would find the Modem region Select utility that must be configured for the same country.
  Delete the existing profile and create a new!

  Best regards and good luck

• Satellite Pro A10 - Modem does not

  I recently reformatted my laptop using recovery discs. The internal modem does not work. It is recognized by the computer, but I get the message "the port that the modem is attacahed to could not be opened." This can be the result of a hardware conflict"when I query the modem in Device Manager. Also, in the Device Manager there is no indication of being recognized COM port. What can I do?

  Hello

  First I recommend you remove the modem from Device Manager, and then reinstall the modem driver.
  It is not necessary to assign any COM ports manually. After installation of the modem driver all have to be configured automatically. Do not forget that you are using the modem driver good for the country where you live.

• HP Elitebook 8560p: Windows 10: Elitebook 8560p; WiFi button is not working, Wifi - and internal 3G modem does not work

  Mobile: HP Elitebook 8560p
  Bios: 68SCF worm. F.6.1
  Modem: AGERA Systems HDA Modem
  HP hs2340 HSPA + Mobile
  Network: Intel (R) (R) Centrino Advanced - N 6205
  Intel (R) 82579LM Gigabit Network Connection

  OS: Windows 10.0 (build 10240)

  I've updated HP Elitebook 8560p of Windows7 (64-bit) for Windows 10. The upgrade process was successful. Later, I noticed, Wifi and 3 G-internal modem does not work. Sametime, I noticed, that old HP Connection Manager has been uninstalled (or lost?).

  The problem is basically this: Wifi - and connections 3G internal modem does not work. I noticed, that wifi-button has "orange" color and the button does not work? I can't change the Wifi status parameters at the level of the OS of Off to On. That's why assume that the wifi module is on "off"-"State. I found the driver SP7107 (driver Wifi for Windows 10 button) package and I tried to install it. The installion failed because InstallDriver_64, location failed. (In Finnish language. Toiminto InstallDriver_64, may c:\...\WirelessbuttonDriver.inf' / installdrv/force). Is there an instruction manual to install the driver?

  I'm very confused and I don't know really, what is the first cause of the wifi - 3 g-modem internal questions and. I guess, this wifi button is not about root work.

  Can someone clarify why there are not more HP Connection Manager on Windows 10 and I tried to install, but install cancelled due to bad BONES. How can I manage wifi - and States of modem 3g without it?

  If anyone can help?

  A big thank you!

  Sip2sip

  Uninstall the access key and button wireless driver

  Reset

  Open Device Manager, run the dirver update

  shouldn't this go

  Download Connection Manager

  FTP://ftp.HP.com/pub/SoftPaq/sp66001-66500/sp66235.exe

  Install the program in Compatibility Mode in Windows 7

• If my connection interrupted by the ISP, my connection broadband (PPPoE) on my windows 7 freeze and it does not cut, and he does not answer to disconnect click.

  If my ADSL connection disconnected by the provider of the connection on my computer freezes instead of disconnect!

  As the title suggests, if my connection interrupted by the ISP (for example: Internet service provider who use dynamic IP automatically disconnects after 24 hours permanent connection), my connection broadband (PPPoE) on my windows 7 freeze and it does not cut, and this isn't answer to disconnect click, even if I uninstall the Ethernet card, keep the connection.

  Everything else works fine, and the only way to connect to the Internet is to restart my pc.

  Also if the connection is disconnected due to a traction cable or ADSL Modem power connection broadband (PPPoE) on my PC disconnect normally without any problems and I can reconnect without any problem.
  any help with this.

  Hello

  PPPOE software th whole arrangement never worked well from the first day more than 10 years regardless of the operating system.

  So most serious DSL carriers actually give free Modem/Router so that authentication would be by the side of the router WAN.

  They give it for free for phone support for this problem cost them more than the $10 adds the router to the Modem

  For example, get a router, simple routers in the United States are sold for less than $15.

  Router solved the problem PPPOE provides, security with NAT firewall, and stream DSL is actually faster than with authentication of software.

• Ethernet USB adapter does not work after update to sierra mac

  Ethernet USB adapter does not work after update to mac sierra.

  Please solve this problem as soon as POSSIBLE

  Hello guatamshah,

  If your USB to ethernet adapter does not work now that you have upgraded to Mac OS Sierra, there are a number of things we can try to get it working again.

  The first thing we want to do is to reset the SMC and the NVRAM on your Mac.
  Reset the management system (SCM) controller on your Mac.

  https://support.Apple.com/en-us/HT201295

  How to reset the NVRAM on your Mac.
  https://support.Apple.com/en-us/HT204063

  If the adapter is not still work after only two resets check to see if your Mac recognizes the device properly in the information system. In the Apple Menu, choose about this Mac, and then click the button 'system report... '. ». Once you have the window open system information, see the USB category on the left.
  OS X: about system information and System Profiler

  https://support.Apple.com/en-us/HT203001

  If she does not appear in the information system, see the articles below.
  macOS Sierra: If a USB device does not work

  https://support.Apple.com/kb/PH25343

  macOS Sierra: check your device's USB connection

  https://support.Apple.com/kb/PH25567

  However, if you do not see the device in system information, you may need to verify that network service appears correctly. In the Apple menu, choose system then Network preferences. You should see an entry similar to "Ethernet" on the left. If no, see the steps in the article below to add. Once add, test to see if your connection works with a disabled Wi - Fi connection.

  macOS Sierra: Add a network service
  https://support.Apple.com/kb/PH25279

  If it does not appear in the network, please let us know what you see on the right when you select the service, and the name of the service as it appears and we can go from there!

  Kind regards.

• Portege R400-103 - 3 G internal modem does not

  Hello

  I have several problems with my 3g modem. Even if everything looks well installed, the modem does not respond. In addition the hibernation, sleep and shutdown cause in an accident.

  Portege R400-103
  -Windows 7 Professional

  * About sleep/wake extended/dhutting down: *.
  When I disable devices that are bound to the modem 3g, this all works, so my conclusion is that this has something to do with the 3g device.

  On the modem does not: *.
  When I go to the properties of the modem, and I ask for a diagnosis (modem to send information on the State of request) a box arrives with a message that the modem has failed. The modem worked, and frankly I don't know what crazy it has stopped working.

  Maybe you guys need more specific information. Please let me know.

  Any help appreciated.

  Hello

  Just a question at the beginning: is your laptop preinstalled with original OS that you got with your laptop Portege?